Tally Ho was amazingly close to her lines when launched. Just a bit bow up waiting for this hunk of iron to bring her down level!

@jonunya3128

21 күн бұрын

she does sit pretty doesn't she?

@AraCarrano

21 күн бұрын

Ditto.

@petert3355

21 күн бұрын

I'm willing to bet that first night was the best night's sleep Leo has had in awhile. He and the team have worked so hard, for so long, and now he gets to enjoy being rocked to sleep on her.

@silasmarner7586

21 күн бұрын

You've got a point there Joe. And They can move the ballast they've already set in there so it will be swwwweeet!!!!

@mchristr

9 күн бұрын

Excellent observation. I'm wondering how much the completed capstan will weigh. I guess we'll find out when it's prepped for shipping to Pt. Townsend.

Leo is a lucky shipwright that he found you. Hard to find any machine shop that would take on such an involved one-off project. Thank you Keith!

@silasmarner7586

21 күн бұрын

Keith Fenner does maritime stuff particularly this oddball stuff, but Mr. Rucker is perfectly capable. It'll work juuuuust tine.

The most impressive part is how calm you seem to be machining this irreplaceable artifact. I would be a nervous wreck. This has been one of my favorite series of yours yet. Well done!

@johnsherborne3245

21 күн бұрын

To be fair, Keith seems out of his comfort zone with this, lots of folk watching him makes it worse. I’d be uncomfortable just battling this quietly on my own. I too hate Stainless, if anything there are worse alloys, nimonics. Ugh!

@silasmarner7586

21 күн бұрын

It's like these rock climbers I see do solo loops of routes if you fall off of will kill you dead. He's confident and experienced and cautiously evaluates the high risk areas. It what makes 'em great. THis is a crux operation for Tally Ho.

@CanizaM

21 күн бұрын

He already broke part of it taking it apart and will have to cast a replacement.

@at1cvb417

19 күн бұрын

@CanizaM, He did not break the capstan head, years of neglect and exposure without maintenance did that, he did everything to not break it, the capstan head was just to far corroded and the part failed, as with everything on Tally Ho decades of neglect have taken it's toll, the part failed and needed to be recast, which it was. Tally Ho truly is a ship of Theseus. Leo has taken her completely apart replaced 99.9% of her and reused what he could, this capstan is no different, repairing and upgrading the existing parts so she can last another 114 years.

@poldiderbus3330

19 күн бұрын

@@CanizaM What has already be done by the Windy Hill Foundry - with not less hassle than Keith is having..

Came here for Tally Ho, but will be staying for the talent. Love that you don’t hide anything and let us see when things go wrong.

Thanks again Keith - I am sure many folk following this project are wooden boat boys and your explanations are really helpful.

I love that you show when you hit snags and how you get past them. Thanks!

Thank you Keith for all that you do. You’re the shop teacher I never had. Thanks to you and all the trades who made and make this country great. There is no substitute for experience and a job well done! All the best!

You are certainly the perfect machinist to have been on this project. Been watching Leo for 6 years. They saved the best for last.

The effort, work, and time... An epic lesson of patientence and persistence!

So much fun to see the process and the surprises and the adjustments-and the knowledgeable comments that so many professionals who watch the channel are providing.

For others watching this. Some types of stainless steel work harden almost immediately. The issue with drilling is that the center of the drill does not actually cut. The tip of the drill actually deforms the material outward to the cutting edge. If you speed and feed rates are not correct, the deformation hardens the material. Once hardened, it will break before it deforms, and you end up with little hardened bits of steel in the chip pool that chip the drill causing even more hardening. If you are very lucky, you can baby your way through the hole by clearing the chips constantly. The big issue is that pecking is the easiest way to guarantee work hardening SS. It is really important that you are always cutting when the tool is in contact with the material, when the tool dwells at the beginning and end of the peck, it will work harden. Best thing is to just drill straight through under constant pressure. Just dump luck that slug landed perfectly and fused itself to the material underneath.

@peterhobson3262

22 күн бұрын

Besides cutting continuously, lubrication with a cutting fluid like Anchor Lube or Tap Magic will help with both cooling and keeping the drill bit sharp.

@bobhudson6659

22 күн бұрын

@@peterhobson3262 Plus slow the speed for stainless. 750 rpm is way too fast - as Keith found out. I am sure in hindsight Keith worked all of this out, guided by what Joshua and Peter have indicated.

@Gwatson000

22 күн бұрын

I'm just a lowly retired engineer with lots of machine shop experience but I would have run the drill slow from the beginning with lots of coolant. Stainless can be a SOB and there is only one capstan with a very expensive looking gypsy. Keith recovered nicely and the job looks great.

@hughshepherd6596

21 күн бұрын

I hate S/S especially 316. My success has improved using cobalt drills, is that your experience at slowish speeds?

@markbennett9787

21 күн бұрын

For the first hole drilled he didn’t appear to use any lubricant and even sped up the drill until he hit trouble . I have very limited experience of drilling stainless but could anticipate problems arriving.

This is quality work that’s going onto Tally Ho when Leo starts sailing the boat if ever I get to see it I will look at this capstan and think of all the work that’s gone into it that will still be there when I’m long gone .

I learned a new word today and that makes me happy. Chain Gypsy

Thank you for sharing this video, and for sharing your knowledge and skills on how this is done.

I'm really impressed with the engineer that came up with the fix for this project. It's pretty complicated from start to finish. But should last another 100 years without much problems. And the only thing that should be a wear part is the winch motor. Can't wait to see you on the next one.

The rework on this thing was a major job!

Drilling stainless , I was taught to drill at half speed or less!

Just love the attention to details you do on the capstan!

Such an interesting series of videos that you've put together Keith. It's very instructive watching you work your way through this project. And what a project! Just getting the capstan apart was an ordeal. Making the pattern was quite the exercise. Casting it was a challenge. Designing, making the gypsy, etc was another exercise. And now you get to put the whole thing together, along with a whole lot of machining. In a way it resonates well with the entire Tally Ho project which has been anything but easy! Thanks for taking the time to do all of these videos for us. It's well appreciated!

It's a great pleasure to see Keiths various machines doing there jobs apparently effortlessly. Thank you Keith for sharing. Best regards Sarah

I always learn something here, both from the videos and the informed commentary.

Most interesting process. Never thought I'd be invested in the re-building of a 100+ yr. old capstan. Nicely done and well explained to those of us with a limited knowledge of machining. (Now, to look up work hardening)

Continue to be fascinated by your problem solving skills. So much more goes into this than I for one would have imagined. 🇨🇦

Man i was worried when you were haunching down on that tap. Glad to see it worked out

Wonderful Keith. Fascinating, entertaining, educational, absorbing. Thank you.

I used to drill a lot of CRES, Inconel, and titanium in the aerospace industry. It was challenging like that stainless. We had this one assembly for a C5 Air Force transport plane engine pylon that had a month lead time to get a new one if we messed it up. When I asked “what happens if we blow a hole?” I was told “just don’t.” Haha. No pressure. I never oversized a hole in 4 years.

Know nothing about what you are doing, but always find your projects interesting and your discussion help me understand what and why you are doing something. Plus I like you show “ mistakes “ it makes the project “ real “. Keep up the great work.

Probably been mentioned, but since the hole pattern is not perfectly symmetrical, stamping some corresponding marks into the gypsy parts and winch would save future maintenance people's sanity :)

@stevewoodard527

21 күн бұрын

I was thinking the same thing. I'm sure he put clocking marks on all three parts, but to your point, making them permanent is an excellent idea.

First time I have some imput about your work. I millwrighted in the construction industries for 35+ years maybe 10 years in the food processing industry. Drilled maybe tens of thousands of holes thru many many different thicknesses of stainless steel . This is what I " Know " flattened cutting flutes on the drill bits on both cutting axeises, drill pilot holes, slow the driver down very slow, the use more pressure down when drilling !! You think drilling something stainless this thick is tough dry some 10ga sheet metal. Forgive my boldness. God bless you Sir

Looking forward to seeing installed on Tally ho. Awsome work! 👍🏻

So the little slug was holding on the drill and then spinning on the lower part heating it up and hardening the parts. Then you had to fight that. Wow always something to learn.

@CothranMike

21 күн бұрын

That slug work hardened just a bit of the surface under it as Keith stopped soon enough. Had to watch an apprenticeship candidate do something similar decades ago, it was hard to watch, you want to jump in and fix it, before the fact since we knew how. Waiting for the dawning realisation in the demeanour of the subject was the rewarding part. He has since completed, past, and mastered many other modes of craftmanship in the industry and retires soon.

@darkhorsegarage9623

21 күн бұрын

At first I could not understand why the bit was not dull . Then I realized the slug was spinning.

Keith - love your channel, and I am very happy that we see it all, including the little problems. Who else could do this Capstan while we watch.

SV Tally Ho was launched on April 18th and Leo posted the video of the launch 2 days ago , if you'd like to see a very fine sailing vessel Leo's channel is actually > Sampson Boat Co < I've been watching her get restored for years , an amazing journey !

@Hoaxer51

21 күн бұрын

I’ve only watched a few videos of Tally Ho over the years (they were all very informative videos, just to busy to find the time) and I did watch the launch. Very sentimental for the people involved, understandable, it’s such a fine ship with all the different crafts that were applied by so many craftsman. It seems that the craft is back and they should all be very proud of what they’ve built, Keith included. I’m sure that there was some discussion about the machine work that needed to be done by the engineer that was designing the capstan and Leo and they made another great choice by going with Keith Rucker as the machinist to perform the work, Thanks for sharing Keith, see you on the next one.

@ulbuilder

21 күн бұрын

Launch video: kzread.info/dash/bejne/fWeGycyYe8vMnM4.htmlsi=5iPMSi97CF6QBVRv

Your meticulous metal work is complimentary to the quality of Leo's teams woodworking. True master hand done craftsmanship

Again, I really enjoyed watching these processes, also I was glad to see that even professionals can have trouble drilling Stainless Steel!!

I cringed when I watched you increase rpm. I hate stainless, spent 14 years doing maintenance in a food processing plant. Cobalt drills chip the edges too easy, new TIN drills aren't sharp until reground, good old fashioned black oxided bits are the best in my opinion. Tap magic made a heavy lube that worked well, can't recall exact name, got a bottle but not walking to shop to look. Looks like heavy black oil but it has tap magic in it. Probably can't buy it anymore but it works well. I love my present job in a die shop, after stainless, d1 and a2 are like working with butter. Keep making videos, love the new die mill, could have used it last week, made a fixture for rotab and got it done. Again thanks for videos.

@qqqqqqqq1407

22 күн бұрын

i said out loud, noooooo what are you doing?!?!?

@98grand5point9

21 күн бұрын

I worked on Budd stainless steel railcars for several years. It's a good thing I quickly figured out how to drill that special stainless alloy. I was able to use just one step drill the whole time.

@mchristr

9 күн бұрын

Ages ago I briefly worked in a production machine shop turning and drilling pipe flanges in stainless and Inconel. If the drill point angle and the feed rate weren't correct that hole would smoke in a hurry. I recall going very slow but the chips tell the story.

Good morning Keith! Have a great week.

I was always taught to slow down your tool speed with SS not speed it up. Plus i reckon the temper on that drill is stuffed now.

@spentacle

22 күн бұрын

The Black Book gives 978 RPM for CI and 478 for SS at 5/16 DIA so yes you are right.

@bobdown6235

22 күн бұрын

Also noticed when tapping Keith just did a continuous cut, didn't back the tap off to break the chip. I was taught to always back off the tap, no matter what material you are tapping. Prevents that pitiful sobbing when a tap binds up and snaps off in a deep or blind hole.

@spentacle

22 күн бұрын

@@bobdown6235Had me cringing too, especially when it obviously tightened up .

@StevenCampbell1955

22 күн бұрын

@@bobdown6235 ' Prevents that pitiful sobbing when a tap binds up and snaps off in a deep or blind hole.'

@ferdinandanderson3073

22 күн бұрын

I really appreciate your attention to the project and being confident while im on the edge of my chair Thanks

What is great about following Keith’s and Leo’s channels is the interplay between precision wood work versus the excellent machining and fitting. Real craftsmen.

Keith, it's such a joy to see you, again and again, apply your knowledge, experience and creativity in your work. I love seeing your on-the-fly problem solving in action.

@theessexhunter1305

21 күн бұрын

The problem is simple the drill speed was too fast, basic Engineering 101

@garybrenner6236

21 күн бұрын

Maybe he will start on the Stoker Engine soon.

@theessexhunter1305

21 күн бұрын

@@garybrenner6236 Lego would be my call lol

Another perfect breakfast video, even including the scary moment. Great work, Keith.

I am seriously impressed. Impressed with the engineer/designer who came up with the fix for the old capstan, impressed with the UK machinists , and impressed with your skill and professionalism Keith. Well done! Well done indeed!. I do have a question. Will not these dissimilar metals, cast iron, stainless steel and bronze form some kind of a battery in a salt water environment? Can anything be done to protect against that?

When I took machine shop in high school I think we used lard as a lube. When the steel got hot the shop smelled like a kitchen.

Such awesome modern technology, for a century old sailing ship. Can understand why Leo asked Mr. Rucker to help. That capstan is a work of art.

@frederickstibbert7389

18 күн бұрын

Just wait 'til you see the new driveshaft, dog-clutch & engaging lever - it's a nifty, compact design.

Kind of obvious that you need to use 'Anchor'-lube, it IS for Tally-Ho's capstan after all 😉 👍

@The_DuMont_Network

21 күн бұрын

go to your room! 😂😂😂

Oof, the moment when you accidentally reinvent friction welding...stainless steel can be really gnarly sometimes.

Thank You for sharing your wonderful life with us. You are The Doctor of Machining. Awesomeness Extreme!

Great job! 🇺🇸👍

Kieth, when you were making the flat surface on your first hole, the bit was wobbling as you put pressure on the bit. Not trying to be critical, and maybe you already know. Thanks for doing videos for us. Is much appreciated.

_HEAVY DUTY precision!_

Well done on sorting out your sound levels in recent videos (the machining was great too!).

Surprised that stainless bolts were not called for.. I have fabricated with non-magnetic stainless steel and found that every drilled hole is a challenge to itself. The tolerance you are able to hold on your jobs is impressive, inspiring even !

Oh, man, I hate when work-hardening happens! Thanks to you and others I at least now know it's a thing. Being self-taught and inexperienced, I just didn't get why drilling sometimes became especially a bear, until spending time watching you teach all of us about working with metal, especially the very basic things that other makers might assume everyone knows. Believe me: we don't! I gotta admit, too, that it makes me feel a little better about my own work to see that this kind of thing can happen to even experienced folks. I know that some others might have left that bit out of their videos. Commenters here explain why it happened in more detail, and that's interesting. But you already showed us yourself here in the video how to get beyond the problem. Thanks, Keith, for showing us the hard bits (ooh, I see what I did there!), too.

I really enjoy your videos. I stopped in Tifton for lunch yesterday on our way back from Florida. Had you had an address listed, I might had tried a surprise visit

I said to myself. [ SELF] !!! that is to fast for stainless!!!!! But you have been here before. Haha

G'day Keith, The Anchor Lub was well named for the job at hand.😊😏

Highly appropriate that you use a product called anchor lube on a machine designed to haul up an anchor.

Good show. Very interesting.

Great project!

The irony of you using Anchor Lube on a capstan... 😅

really interresting as usual!

Another great video Keith! I really enjoy watching you problem solve real time when something doesn\t go exactly as expected. Thanks for sharing!

These are such good coding-accompanying videos. Just seems like a very nice chap and seems to have all the same problems I always have doing stuff and talks through it all calmly and sanely. Like a sort of therapy, I guess. Just need to find some more bits of the boat this guy can work on, must be something. New prop maybe?

Avchir Lubricant for a capstan: how appropriate!

Always a pleasure to watch you work.

Thank you for bringing us along on the project.

I went through nearly a dozen Greenlee knockout slugs while trying to make 160 3/4" holes for conduit in stainless steel electrical controls cabinets before I discovered the "Slug Buster" variant from Greenlee. Still, I went through another five or six to get the job done. Stainless steel is just evil.

It's all the more interesting when things don't quite go as planned, and watching how you deal with it.

Sure is a lot of work going into the Capstan, great skills again.🎉

Keith, you're a brave man. I've been doing a bunch of stainless work recently, and thinking about the grief that breaking a drill or tap would cause you in that setup, had me so tense I literally sighed with relief when you cut to having all the those bolts in place. Well done sir.

Try this: Drill at a SLOW RATE and USE WATER INSTEAD OF CUTTING OIL. This will keep the temps low enough to prevent hardening of the stainless which will ruin the bit.

Cobalt drill with Tap Magic for stainless steel. Been watching both you and the Tally Ho project for years. Thank you.

they launched it on Saturday

@mustavakybab9890

22 күн бұрын

Hope Leo doesn't need an Anchor this week!!!

@aserta

22 күн бұрын

Not really, no. It was published Saturday. TH has been launched for a week or so at least.

@MikeAG333

22 күн бұрын

No, it was on the 19th, I think.

@grntitan1

22 күн бұрын

People can not grasp that most KZread videos are prerecorded sometimes weeks(or more) prior to the release.

Fascinating series. Knowing TH is in the water, I can't wait to see this beautiful unit installed.

I look forward to your videos just as much as I do Leo's -- interesting to an old retired casting engineer who's coordinated machining a lot of castings. Thanks for posting..

Not a machinist. Don't know anything about. But it's a real treat to be able to watch a craftsman own his trade.

Again, riveting, thank you.

It's really excellent watching you work, Keith. Fascinating stuff. Thanks.

Thank you Keith!

Thank you for sharing.👍

That's a monster drill machine. What an amazing tool. I never saw anything like that...

Fantastic job thanks for sharing.

Great work Keith!

Good for you great video thanks

Nice work!

Enjoyed thanks for sharing Keith

Great work Keith. Loved the video.

Brilliant !! 👏👏

Love to watch this! You are a genius!

Thanks Keith

Thanks fer the video beautiful work

I pretty challenging job! Thanks.

Another great video Keith!

Mixed metal drilling it takes me way back

Happy Monday Georgia! 😊

Such a pleasure to watch your work. Calm and thorough explanation and video to show its execution. Very captivating. Thank you

Wow Nice job Keith, great looking work.

Getting close to the end .... Tally Ho is in the water now .... all coming together .... ❤❤❤🎉🎉🎉😊😊😊 ....

Another excellent video, massive amount of information. Perfectly done.

Leo down loaded the video of Tally Ho Being Launched. They were concerned with Tally Ho Sitting on her lines. That is floating with the waterline on the hull parallel to the water. She is quite good but just slightly high on the bow. I am very confident that once the capstan is fitted, Tally Ho will be perfect. Hope you get to sail on her.