I've got a rover 60 paired with a rippin lips 8' heavy rod and it's my favorite combo for catfishing, awesome reels in my opinion, I've been looking at the piscifun chaos 60's as well they look legit and reasonably priced like the rovers

Thank you for sharing. This shows awesome quality.

@CattermanAdventures

6 жыл бұрын

Glad you enjoyed! Thanks for watching.

great video showing that the rover 60 is a good reel for all kinds of fishing!!!

Love All 10 of my Kk Reels, Yes I have a Rover 50 ... 🎣😎👍🇺🇸

Awesome breakdown

@dmdfishin

6 жыл бұрын

You're welcome

Great video thanks I have a last king Rover 60 size use mine for back bay fishing

@KastKing

3 жыл бұрын

That’s awesome

Great video catterman. Lonnie

@CattermanAdventures

6 жыл бұрын

Thank you Lonnie!

Love it, I'm getting me a 40 or 50.

@CattermanAdventures

6 жыл бұрын

Awesome!!!

I love KK, but I am not convinced with these round reels yet. I have a box full of junk ones from the same manufacturer. Brand names aside these are from the same factory as Yangs. I'd never pay for one again unless I used it first, I've been burnt a few times over these. I know they are an improvement over years past, but that buyers remorse thing still stings lol. Great vid Kevin!! This is a great company, love the products and service, it's just this one reel, we have history 😉

@CattermanAdventures

6 жыл бұрын

When we get to fish I'll show you that we can regain your trust haha!

@TwiztedFishingTv

6 жыл бұрын

You know we can catch anything from carp and cats to trout and salmon in a half hour range of my place!

@CattermanAdventures

6 жыл бұрын

TwiztedFishingTv You trying to sell me on a Twizted Fishing Guide tour? ;)

@TwiztedFishingTv

6 жыл бұрын

LOL!! Anytime your ready, come on!!

Like the power handel

@KastKing

3 жыл бұрын

Thank you!

Nice spot good fishing

@KastKing

3 жыл бұрын

Thank you for watching

The Spool tightener Is always on the reel handle side that's works at when you got real's got 2 of them one is for your casting distance

@KastKing

3 жыл бұрын

Thank you for tuning in

I have a sharky 3. Works good. Wish could figure out my rover. Without dropping at a shop for few weeks.

@KastKing

4 жыл бұрын

Hi there. Thank you for your support. Have you contacted customer service?

I have 2 but haven’t even used them,gonna try and destroy them on some bull reds and Bull sharks in a couple of months. Glad to see they will hold up,we will see if the Texas Coast can destroy them 😜🎣🐟🐟🐟🐟🐟

@CattermanAdventures

6 жыл бұрын

Awwww snap! Send us your Texas catches on Instragram @KastKingUSA

@jamesscarberry3128

6 жыл бұрын

Kevin's Catterman Adventures you got it 👍🎣

I have my 60 Rover about two years need to open it up and clean and lube🐟

I guess I should have gotten the 60 with the power handle....after only having mine 2 months, both foam grips popped off mine while fighting fish...

@encikyoutube3809

2 жыл бұрын

Same as mine..just using for the first time..the foam grips popped off...

The internal look a lot like the 6600. Abu series.

where did you purchase the power handle for this reel ???

Same as ming yang ..decent reel if not abused .

Использую KastKing rover с 2018. года августа на джерковой снасти. Катушка хорошая и прочная (работает превосходно), рекомендую сразу после покупки произвести ее смазку. В описанном на видео случае (шнур сходит при затянутом фрикционе) произвести дополнительно проверку крепления начала шнура за шпулю . Включите трещотку и тяните шнур постепенно затягивая фрикцион если перестает трещать трещотка значит плохо закреплен шнур за шпулю (шпуля стоит на месте а вращается намотанный на шпулю шнур - механизм фрикциона исправен ).

@KastKing

5 жыл бұрын

Thank you for your feedback and tips! The Rover is a fan favorite across the world!

Do you prefer braid with it? Or big game trilene mono?

I was gonna buy an Abu Ambassadeur, but i may buy 2 of these now...

@CattermanAdventures

6 жыл бұрын

That's the beauty in the affordability. Thanks for watching!

I bought a rover 60 0ff Amazon 2 weeks ago and I absolutely love it except for the drag, I can tighten it as tight as it goes and can still pull the drag fairly easy. I was just wondering if you some suggestions as to what I could do to improve the drag.

@KastKing

3 жыл бұрын

Hmmm we can look into that!

@aliktanto3417

2 жыл бұрын

У меня ровер 70, я отдал его после покупки мастеру на ТО, и мне добавили еще один диск фрикциона , также обработали шайбы фрикциона от эффекта зеркала добавив шероховатости, и теперь фрикцион существенно усилился, не проверяли , но мастер так делал другим и после замеров выяснили что сопротивление составляет 12 -15 кг

My rover anti reverse has gone out I believe. When I tighten the drag the handle spins backwards when I pull line out to test. Dont know how I can fight a fish with the handle spinning.

@KastKing

4 жыл бұрын

Hi there. Have you contacted customer service?

I have a left handed model 40 and was wondering if the cast control knob is opposite of the reel handle?

@KastKing

5 жыл бұрын

hoptag nope there really is at a cast control knob. The knob moves the spool (closest to drag) and the knob you are referring to is a line memory dial. - if we understand correctly.

Other than amazon can you get these reels in the store thanks 🐟

I have a 60r that doesn’t lock in when you reel. It also has no drag. Anyone know my problem? Thank you

Will the handle off a 60 fit a 40?

i have been thinking about getting one for catfish what kind of rod did you get for it

@KastKing

5 жыл бұрын

Check out the KastKat or KatTech rods :) - amzn.to/2K0qD81 or amzn.to/2tuL5mf

Now what's on the other side of the reel😊

@KastKing

3 жыл бұрын

Thank you for tuning in

Hello, every throw of the barad. gets tangled catastrophically, threw the braid 3 times. why is this happening? please help, i bought it on amazon for $55 how to stick neodymium magnets on a multiplier CastKingRover 50? i have neodymium magnets but are they big? Didn't understand

Is it normal for the the numbers around the drag dial to freely spin? I'm assuming not?

@KastKing

2 жыл бұрын

Hi Austin, it's normal, the drag knob is a tension knob for controling the tension of the spool.

@jayspencer270

8 ай бұрын

I have a rover90 that I bought for sturgeon last year. I catch several hundred sturgeon every year so I put the reel through a hard test. Unfortunately it did not pass. Something’s wrong with the drag. The handle spins backwards as drag as being pulled out. And the retrieve feels rough. I’m working with Kastking to replace it. I sure hope the second one is better than the first or I’ll be done with Kastking

I probably missed it in the video, but what size is that reel?

@KastKing

5 жыл бұрын

Looks like a 50 or 60 size from the thumbnail.

If you don't mess with one knob, why is it on there? Just an honest question. It looks like a power house of a reel.

@ThePigonSkates

5 жыл бұрын

The tension knob on the handle side is for centering the spool, the clicker side tension is for setting for spool tension/backlash control. When setting up the reel I will loosen the clicker side, then center the spool with the reel side, go back and set the clicker side tension. You're good to go.

Did they offer the power handle??

@KastKing

4 жыл бұрын

Hi there. Yes they do

Good mehanic

@CattermanAdventures

6 жыл бұрын

Thanks!

Where did you get the power handle?

@KastKing

6 жыл бұрын

They are available on bigger sizes.

@Shamuthewell

6 жыл бұрын

KastKing but where would you find one to put on the Rover60? Buy a Rover70, take the handle of and throw away the reel?

@hvuu1628

6 жыл бұрын

Probably an abu handle would fit.

I have to disagree with you about loosening the drag after each trip. Now, that used to work with felt and steel washer stack type drags, because they did not have the stiffness of carbon fiber disks, and would eventually make your steel washers slightly convex on the drag stack side of the reel. This results in decreased surface area contact in the drag stack, and thus, reduced drag power.. With carbon fiber disk drags, the disks are a lot stiffer. Which lets you put more pressure on them with drag star. This is why they have more drag power. But, like your reference to brakes on a car, they do still wear from friction when they rub against each other. This results in a loss of drag power, because as they wear, they get thinner. And therefore, not as rigid as they once were. It will make your drag feel smoother the more it wears, but the trade-off is that you do lose some power. Loosening your drag after each trip is unnecessary with carbon fiber drags because like I said before, the disks are stiffer, and the steel washers do not get "dished out" like the felt and steel stacks do. When I get a new reel, the first thing I do is take it apart and remove all of the factory grease and oil with a rag, Q-tip, and alcohol. Then I polish all contact areas. I then soak my drag disks in Quantum Hot Sauce overnight, and then reassemble, and lube the reel with the Quantum Hot Sauce. Soaking the disks in the oil overnight, greatly improves the smoothness of the drag when fighting fish, and also extends the life of your drag.

@KastKing

6 жыл бұрын

Thank you for the feedback we will see if we can get the video creator to respond :)

@watcher01a17

6 жыл бұрын

Thank you. I love your products. I own a lot of them. They are a great value. Great prices, and great performance. You keep it up, and I'll keep buying them.

@CattermanAdventures

6 жыл бұрын

Interesting, thanks for the feedback! I'll have to do more research on this. From personal experience I have always been told to give my drag a break when done. This was even with carbon fiber drag systems. Glad you're enjoying the products!

@denofearthundertheeverlast5138

4 жыл бұрын

He's talking about the curved spring washers not being always compressed that makes the drag last longer, not the actual drag washers.

@watcher01a17

4 жыл бұрын

Den Smith I don't think you have a full understanding of the mechanics of how the drag in a baitcasting reel works.

are parts avaible

where to buy spare carbon fiber disks brakes for rover?

@KastKing

5 жыл бұрын

Hi there! Please contact customer service at service@eposeidon.com

@TurboRanger351

5 жыл бұрын

I contacted kastking, they dont offer the drag washers, i was told to send back for repairs.

@snippits75

5 жыл бұрын

@@TurboRanger351 That's the problem with these reels...no parts.

Drum fish. They get over 100 pounds that would be a good test for that real

@CattermanAdventures

6 жыл бұрын

I will be targeting those in the Delaware bay in the Spring. Stay tuned!

Is this reel hard to work on thanks 😊

@KastKing

3 жыл бұрын

Hi there. It’s the same as any. Not very hard, no

Really not that bad

@KastKing

3 жыл бұрын

Thank you

Man hate those c clips

@KastKing

3 жыл бұрын

Thanks for tuning in

That is a copy of garcia design.

brake pegs are useless. once you learn how to cast...

@KastKing

3 жыл бұрын

Thank you for tuning in