🚨 UPDATED DAILY! BEST DEALS on AMAZON: bit.ly/48FGnUv ☑Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher New Govee T2 Review video I just completed: kzread.info/dash/bejne/m2p40pt6fLSyg8Y.html Govee T1 TV Kit 55-65: amzn.to/3NRVlvP Govee T1 TV Kit 75-85: amzn.to/3ynivo9 Govee T2 TV Kit 55-65: amzn.to/3goxIQP Govee T2 TV Kit 75-85 amzn.to/3Faq86B Hexa Lights: amzn.to/3yIc9Bl Floor Lamp: amzn.to/3yiruqR Glide: amzn.to/3nNAY8s Neon Rope: amzn.to/3yl8zeZ Triangles: amzn.to/3usGWj3 3D Panels: amzn.to/3NO5hXa TV Kit + Light Bars 55-65: amzn.to/3Ih6AwU TV Mount: amzn.to/3ONS9D3 Spotless Diffuser Channel 1m Amazon: amzn.to/47aIujz Spotless Diffuser Channel 2m Amazon: amzn.to/3QoHeDb 5% Discount Code: CHRISMAHER Spotless Diffuser Channel 1m or 2m Company Site bit.ly/3NHG5Uw Spotless Corner Diffuser Channel 1m Amazon: amzn.to/3DFhRpf Spotless Corner Diffuser Channel 2m Amazon: amzn.to/3Krqw2q 5% Discount Code: CHRISMAHER Spotless Corner Diffuser Channel 1m or 2m Company Site: bit.ly/3D3yI4R Govee Unbox/Review Videos I've Made Govee Glide: kzread.info/dash/bejne/l2eerNueXcm_n7A.html Govee Lyra: kzread.info/dash/bejne/gHp4u9xsZ73ViLg.html Govee Hexa: kzread.info/dash/bejne/h3iNt9ifk8iapLA.html Govee 3d: kzread.info/dash/bejne/dY1o1a2KoNu2eLw.html In this video I go over a quick setup and walkthrough of how easy it is to use the Govee app and products to sync up your entire room. Govee, Philips Hue, Sync Box, HDMI Sync Box Other Videos I Have Made: Best Diffuser Channel on Amazon: kzread.info/dash/bejne/Y4d_0cGBlK68iaQ.html Best Edge Lit Diffuser Channel on Amazon: kzread.info/dash/bejne/eIJ4y82tZ7nMgto.html DIY Diffuser Channel: kzread.info/dash/bejne/gYWqlbCcfbzWZco.html DIY Board and Batten video: kzread.info/dash/bejne/lGVnuK6ie5qnf7g.html How-To Video for the LED Pegboard Project: kzread.info/dash/bejne/fWh53K6CYcmsnrQ.html DIY LED Baseboard Trim: kzread.info/dash/bejne/e59sqtCAqMm3oZM.html RGB Lamp Hack: kzread.info/dash/bejne/h4KEtMFyaNuygbw.html Corner LED Light using Pex Tubes: kzread.info/dash/bejne/pH2WttyOdJWrZM4.html DIY Govee Glide using only paper: kzread.info/dash/bejne/oG2A1cuKcbWskdY.html Simple Corner LED Project: kzread.info/dash/bejne/jHZpqtOQmLC-ftI.html DIY Customizable Light Up Images: kzread.info/dash/bejne/ZKWT3NR-k8W-eKg.html LED Strip Diffuser Ideas: kzread.info/dash/bejne/Ym1hyMuQmrOaYrw.html DIY Hexagon Project: kzread.info/dash/bejne/pm2sqdt7ZMTOqbw.html DIY Edge Lit Designs: kzread.info/dash/bejne/YpOI1qqkcqWZpqQ.html DIY Black Acrylic Floating Shelves: kzread.info/dash/bejne/aJenta-thsLVoJM.html Other LED Tutorial Videos: Installing WLED on ESP32: kzread.info/dash/bejne/hoN50KiEfNCfg9o.html How To Solder Video: kzread.info/dash/bejne/k6SH3JWHiLzSqJs.html Installing WLED on esp8266: kzread.info/dash/bejne/nmyDr8twg7DWodY.html Power Options for LED Strips: kzread.info/dash/bejne/fXqozMhunaecpKQ.html Use WLED with Govee Lights: kzread.info/dash/bejne/nmSntKlqh6TIoZM.html Re-Use Leftover LED Strips: kzread.info/dash/bejne/c4ei181miKe8kqw.html Unboxing Videos: Divoom Pixel Art: kzread.info/dash/bejne/l22rl6iFmcnNlLg.html Lytmi Neo 2.0: kzread.info/dash/bejne/paicj6eddcm5mdY.html Govee Lyra Floor Lamp: kzread.info/dash/bejne/gHp4u9xsZ73ViLg.html Govee Glide Hexa Panels: kzread.info/dash/bejne/h3iNt9ifk8iapLA.html Govee Glide Light Bars: kzread.info/dash/bejne/l2eerNueXcm_n7A.html The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!

Wow I bought the Govee immersion thing like a year ago but still haven’t set it up yet. I didn’t t know you could connect it to additional lights. I really need to stop being lazy and get this going. Thanks!

@ChrisMaherDIY

Жыл бұрын

You are very welcome and thanks so much for watching! Yeah its pretty cool how easy it is to set up! They did a great job!

@kaislate

Жыл бұрын

This is a new feature that was not available when the original govee tv solutions came out. If you have the older units they are NOT compatible with this. The dream view button will show in the app, but pressing it will direct you to buying the newest TV unit only.

@patrickyeary

Жыл бұрын

You can only connect it to 4 different devices

@crisdeguzman8786

Жыл бұрын

Too bad it does not support earlier releases of govee immersion.

@patrickyeary

Жыл бұрын

@@crisdeguzman8786 true but you can make a support ticket on their app and they will send you a new sync box. It took a while to get to me but it’s free

EXACTLY the video I've been looking for! I got the Govee TV T2 and I wasn't sure how to add more lights to expand t he effects. YOU just clarified it. Thank you!

thank you for this tutorial! you confirmed my suspicion and gave me all i needed to know what i needed to order! you the man!

Many thanks, used this w my dual 5 meter strand I placed in light protector tubes behind the sofa/sectional. Looks great now sync’d up w the tv.

@ChrisMaherDIY

Жыл бұрын

Awesome! Sounds epic! Thanks so much for watching and glad you liked the video!

Just FYI look at the directions before sticking the lights onto the TV. It requires you start in one of two specific corners or things won't line up correctly. I put mine in upside down at first and had to peel everything back off. Definitely love these lights and wish Govee would make a similar kit for monitors/small TVs

@ChrisMaherDIY

Жыл бұрын

Good catch! I think you can either start at the bottom right or left but then you always go up and then around from there. I assumed they did have something for monitors but sounds like you don't think they do? I would think there is for sure a market for that!

@brownchild357

Жыл бұрын

They have these same lights for monitors

@Victor-ze3sd

Жыл бұрын

You can find usb kits for monitors on aliexpress

@lucaspoole8866

Жыл бұрын

they do lol

@lucaspoole8866

Жыл бұрын

@@Victor-ze3sd yea junk ones these brand are much better

Great video thank you. I love the lights immediately around the TV, but I think the other 2 zones you added are just a bit to distracting with action scenes. I will be buying the base kit.

@ChrisMaherDIY

Жыл бұрын

Thanks for watching and taking the time to comment! Yeah the lights are not for everyone. I mostly have everything turned on when listening to music that have static background images so that its a nice ambiance without all the flashing lights.

OK, this is what I was looking for. I was concerned if I got the dreamview/light bar bundle I would be limited to just those small bars. Now I see I can expand out to the floor lamps for whenever I get those. Thanks for the info.

@ChrisMaherDIY

Жыл бұрын

You are very welcome and thanks so much for watching! Yeah, you should be able to add I believe up to 5 compatible things to the main camera setup!

Wow. I had no idea this existed! That's crazy! And very cool. Thanks for sharing!

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment! You are very welcome! Glad you liked it!

this is exactly what i needed! thanks for the vid/walkthrough!

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and you are very welcome! Glad the video was helpful!

Thanks for the video, and just subscribed. I have a dark gray back wall for my tv and stil wondering if worth it for my situation, but this was one of the best overview videos I have seen.

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment! For sure the dark gray wont pop as much but I'd say its for sure worth ordering it, testing it out and if it does not look good, just return it.

Now this right here is just wow. I got the tv lights n a few rgbic strips from govee. Jus didn't know u can do this for full effect

@ChrisMaherDIY

Жыл бұрын

Yeah it is pretty crazy how easy it is to sync everything together and at least I was very impressed with how responsive it all was! Thanks for watching as always buddy!

Chris does really great videos. This is another one. I'd like to see an overview of the govee app some time. I think people don't try to use it or give it much thought until they actually buy a govee unit. Having prior knowledge of the experience the app gives might be beneficial to viewers.

@ChrisMaherDIY

Жыл бұрын

Thanks again buddy and that is a great idea for a video! It could probably be at least a 30 min video lol.

Holy cow. I have those and didn't know that was a thing. I'm going to do now. Thanks!

@ChrisMaherDIY

Жыл бұрын

You are very welcome and thanks so much for watching!

Interesting. I was looking at the Envisual T2, but was concerned any LED backlight system would look odd with my TV, as mine swings out into a corner and not flat on the wall. I think adding a floor lamp centered in that corner will greatly help to fill in the light fall-off behind the center of the TV in that area. In the app, it will be position #3 for me. It be nice if they offered a centered directly behind the TV position option in the future.

Thank u bro cause now im going to have a badass setup. Great video btw

@ChrisMaherDIY

Жыл бұрын

Thanks so much and thanks for watching!

JFC. That looks completely amazing.

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment! Glad you liked it!!

Amazing setup! Also loved that WiFi name

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment! Thanks buddy! Hope you have a great Christmas!

@kaeez

Жыл бұрын

@@ChrisMaherDIY You too kind friend

Looks fantastic ❤

Nice thanks. I was looking at this on Amazon, lots of great reviews.

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and you are very welcome! They are pretty neat and most people seem to really like them!

Very impressive, really highlights how small the TV is.

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching! Yeah, the tv looks very small in the far away shots. I never thought a 65" tv would appear small but I think I could for sure do a 75" next time!

@MrFruitPrimate

Жыл бұрын

@@ChrisMaherDIY oh man I didn't expect a response. Good vid for real.

@D.K.-

Жыл бұрын

I think its probably the location that makes it look small. Try centering on a wall and watch it magically grow! I work with shapes and angles for a living lol

Bro best 👍👍very impressed at the organizing skills i wish my room was setup like this too 🤣

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment! Appreciate the kind words my friend!

Great video Love the sea of thieves screen shot Stay happy healthy and fluid

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and glad you enjoyed it! Love the image as well! Thanks buddy!

Excelente video,👌🏻👏👏👏you should make one now explining how to correctly set up in order to get the right color 👍👍👍

@ChrisMaherDIY

Жыл бұрын

Yeah I could for sure go into more detail on the setup and show some of the more features. But for a quick tip, keep the saturation to around 15 -20% and the White balance at around 40%. At least that's what I did to get what I thought was the most accurate color calibration for my tv!

Awesome video. However would this work on a gaming monitor? Would you reccomend it?

This video is very helpful. Do you know if Govee light bulb compatible with dreamview as well?

I see you're a ori fan too sir. Love from Bangladesh 🇧🇩

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching! Such a good game and love the soundtrack! Thanks for taking the time to comment my friend!

Wow. I am really impressed

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching! Glad you liked the video!

Dude! you go me sold!

this looks awesome....thanks for sharing.

@ChrisMaherDIY

Жыл бұрын

You are very welcome and thanks so much for taking the time to comment!

I’d like to do this in my basement theater. I plan to hang a 98” Samsung is there a backlight for this size? I’d also like to add led lighting In my crown molding around the perimeter of the room and use the dream view feature. Is there a specific type of string light to use in the molding’s

Great vide of the setup and installation. My OCD is on FIRE though cuz the TV isn't on the fireplace.

@ChrisMaherDIY

Жыл бұрын

Lol yeah if I were to do it again I'd probably do it above the fireplace. I think at the time I read somewhere that having the tv too high is bad for your neck. (I also think the challenge of installing it through the rock also might have played into the decision lol) Thanks so much for watching and taking the time to comment!

@terrification

Жыл бұрын

@@ChrisMaherDIY Agreed you'll probably need a pro to run power behind the brick there. 100% right about tilting your neck up as well. I watched this video because i'm looking to do something similar to my projection setup. Can you string a few of these together for larger installations? I have a 120 inch projection screen.

@ChrisMaherDIY

Жыл бұрын

@@terrification thanks for the info! Govee said they don't work on projectors although I have not tested it out so I'm not exactly sure why it wouldn't. Even if it could work, your not able to splice a couple together to fit a larger screen than what the kit is made for. All the programming is setti work with specific size range. I have seen a couple diy version people have made on KZread that look amazing and I hope to someday be able to do a diy one myself!

Really really nice. Thank you.

@ChrisMaherDIY

Жыл бұрын

Thanks so much!

Beautiful!

@ChrisMaherDIY

Жыл бұрын

Thanks so much! Glad you liked the setup!

Nice vídeo Bro... Cools ideas ever!

@ChrisMaherDIY

Жыл бұрын

Thanks so much! Appreciate the kind words and glad you are liking the videos!

とても参考になりました。

Can the same effect be achieved using the Govee Smart Light Bulbs in an existing floor lamp (along side the immersion kit of course).

It looks so cool

@ChrisMaherDIY

Жыл бұрын

Thank so much for watching and I'm glad you liked the video!

can I use the Sync Box instead of the T1/T2 Camera, and still add all the other room lights

Can you select multiple spots in the room for if you have something that sounds a large area?

Thumbnail: Anime Video : rarely any Anime. People: You fooled us

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and my apologies. I should have had more anime. But you did give me an idea. Maybe I should just do a complete video and only have some of the best anime fight scenes. Might be a fun video to do. Thanks so much!

How do you set up two floor lamps to synch on opposite sides of the screen ..2 separate channels?

Do they make them long enough to go around a 135 inch projector screen? (63"*110)*2

Hi Chris, thanks for the cool product demo! Is there a way to integrate your wled based lights?

@ChrisMaherDIY

Жыл бұрын

I think I have seen 1 video on KZread where someone is able to use WLED to sync things up with their tv and it looked amazing! One day I hope to figure it out but it looked like it required a lot of programming. Thanks as always for watching buddy!

hello, can you tell me if the synchronization can be done with the Govee Smart LED Bulb? (I have the Goove Dreamview T1 on my TV) Thank you for your reply

What would you say is the optimal distance from led to wall?

How did you get the true black on your other lights?

What calibration/color settings do u use? (Like saturation, white balance, brightness)

excuse me, can i connect govee t1 or t2 with the other led strip like govee type H619A Or H61BE? or just can connect to only govee m1?

Im looking to buy the 55-65 inch ones but i have a 50 inch tv will there be a problem?

I have the the H6046 light bars and place them on the bottom of each corner of the tv on the table because my tv is on the wall but I can’t get my light bars to sync properly with my led light strips I’m using the t2. I think I need to put the area setting on the bars in dream view but the area setting numbers are confusing

Could this work with a projector?

Great video Chris. Question for you, can you provide a link to the connector cables you mentioned at 1:20 of the video? I have purchased some in the past and the problem I ran into is the colors nor staying consistent throughout the LED strip. Thanks!

@ChrisMaherDIY

Жыл бұрын

Thanks for watching buddy! So the connector wires in this instance are the ones that govee just has connecting the strips together as part of the product. I know what your saying though with the connectors. The ones I've used in the past do work but sometimes requires them to be in the perfect spot for a good connection and if it gets bumped even slightly the lights go crazy. Not ideal. Soldering is the way to go but here are the ones i've used with decent results: amzn.to/3d7OUIN

Mine don’t change with the scenes of the movies how can I do that? Should I redo the camera calibrate process?

Great video

@ChrisMaherDIY

Жыл бұрын

Thanks so much!!

Can you cut the strip when setting up to fit the tv better? I have 43in and it’s too long and the color is in the wrong side

3:19 Can you choose any govee product there or just some are supported ?

I had change the thing. How do I change it back to sync the lights

Can you sync 2 m1 strips without the immersion kit?

Does this work with Govee light bulbs as well?

One important note: You need to have the latest hardware revision to get the latest firmware to immersion that enables the dreamview option.

@gavinnelson6871

Жыл бұрын

How do you update the hardware

@GamerDan89

Жыл бұрын

@@gavinnelson6871 open the device and check if left side there is firmware version written

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching. I'm still waiting to see if Govee can provide me with a list of all their products that currently support the Dreamview function. I'll let you know If I get a list here soon!

@kaislate

Жыл бұрын

Right now I have confirmed it is only the newest TV product. The older ones with the previous two camera designs are NOT compatible. This may change in the future, but govee's track record of adding features to older models is not great. Govee has more SKUs than taco bell has hot sauce packet quotes. This is their business model. A great example is when they released their Lifx bar clones. The original design included only one angled piece and could only be assembled in one direction. Later they added more features to the bar lights but this required you to purchase the pro version... Then they did it again and it required you to purchase the super duper pro version. Even though there is no reason the older units couldn't get the updates. Once you get as deep into the govee ecosystem as I am you start to realize how much you are being screwed over. A person that never owned a led bar system before isn't going to know any different though and will probably be happy.

@Wootts007

Жыл бұрын

@@kaislate I dunno, I sent them a nice email and they updated my hardware box to latest model for free, I've had the immersion for over a year!

Can you connect this with a govee led stripe, imo it's simpler (looking)

Is there a way to sync both - Philips Hue Ambilight TV Strip with Govee Hexa Pro so they mimic the image from my laptop/TV? Maybe Home assistant can act as a bridge?

So I installed the Govee Dreamview pro. The kit comes with the strip and 2 light bars, I also bought 3 lamps. The kit looks good but not nearly as nice as this one. I stuck the tape light as described starting from the right lower corner if your looking at the tv from behind, calibrated the lights as described with the orange squares and set up the lamps as described in the video but I get a lot of red’s in my color. It doesn’t do as good of a job separating the color spectrum as the video. Am I missing a step? I play Grand Turismo and the start up colors on the screen are mostly blue on the left and red hues on the right but on my lights it appears as red hue all the around. It looks nice but not the way intended. Help please and thank you 🙏🏼

How many light can you add to the dream view? As many as you want?

Amazing set-up! How will these work against a dark background? I have a 70" tv mounted on a very dark gray wall. Keep up the great work!

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment! I have not personally tried it on a dark background but just from experience its for sure not going to look as good as something with a lighter color background. I would maybe try finding a cheap red, green, blue light that I could shine against the wall to test how the colors looked before buying something. I guess you could always just return the thing if it doesn't look good!

Looks great. Very timely, I was just looking at the product. Question you might be able to answer, can you do music sync with other govee lights using the mics on this controller? I noticed they are selling a separate audio mode controller that can control up to 7 devices but wasn't sure if this did TV mode and audio mode with sync. I am thinking about putting dreamlights + 2 bar + 2 separate strips in my kid's dorm room.

@ChrisMaherDIY

Жыл бұрын

Thanks as always for watching buddy! So you can do music sync but its what I would consider a basic version with not nearly as many features/options as if you were going into each devices music settings separately. So if you have the tv sync on and all the devices are synced up to the color, you can also turn on sound which will then pulsate the colors that are naturally there due to the screen mirroring. The other thing you can do is create a scheme and add all the devices. You can then control all them at once and there is a sound option in this setting but it will only display 1 color at a time across all the devices. Unless someone else knows a different way, thats what i've found out!

@djweso

Жыл бұрын

@@ChrisMaherDIY thank you!

How do you get your lights to go off completely when the screen is black? My setup, seems to always have a very dim white when there’s a black sceen

How did u connect all the lights together ?

i love your set up, is this ok to use if i have an LG C2 series OLED tv?

@ChrisMaherDIY

Жыл бұрын

Thanks so much! If I remember correctly, the LG c2 series tv is very slim correct? The T2 is better designed to fit on slim tvs so I would probably check out that one instead of the govee T1. Here is the video I made using the T2: kzread.info/dash/bejne/m2p40pt6fLSyg8Y.html

@glall3603

Жыл бұрын

@@ChrisMaherDIY will the LG C2 be susceptible to any glares in such a set up as described in your video. I’m happy to be a subscriber to your channel my friend.

Hi Chris - what are your thoughts on the immersion kit? would you recommend the Govee DreamView T1? Thanks

@ChrisMaherDIY

Жыл бұрын

I personally love the kit. Its what i'm using in the video and it all works really well together and being able to connect other products to it is awesome. Cant go wrong with the DreamView T1!

Could I use the older lamp to sync to my tv as well or it has to be the newer one?

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching! So I know I'm using the first version of the Govee Lyra lamp so it should work just fine!

Hats off to you Sir, I was was actually looking for this video. Also, is there any other possibility to have it synced without the camera and to the pc ? I know Razor and Govee desktop app partnered together, would appreciate if you can make a video about that too. Thanks in advance.

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment! I know govee makes a pc version that works pretty much the same way but that also requires a camera. I know there is a rumor that Govee will be releasing a non camera version but I dont have any details on if thats for sure or when that might be. I have not tried the razor/govee setup so i'm not exactly sure how that would work but maybe someone else on here might know more than I do and can chime in! I would love to start getting more into pc type setups and if I do I will for sure keep this in mind! Thanks!

Can the added light systems only display one color? Let´s say I want to add one additional LED strip to to every side of the TV- for example on each wall, the ceiling and teh floor. Would these additional strips only light in the color of the center of the corresponding TV side or would they be able to match the whole captured section of the TV´s captured side? TO make this easier: when there is a gradient from red to green on the TV´s top, would the additional light placed above the TV´s top also be able to light from red to green or would it only light in a single color between red and green?

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and great question! So most of their new led strips let you assign up to 6 locations to the led strip that correspond to the tv. so its not perfect because their are 4 sides to the tv but only 6 locations which means some sides are going to have to have 2 sections while others will only have 1 assigned to the strip if that makes sense.

@ChrisMaher Ist there any kind of list which govee products can be connected with dreamview like in the video?

@ChrisMaherDIY

Жыл бұрын

That's a great question! I'll reach out to them and see if they have any kind of list that they update. That would for sure be good to know!

Do you know how much bandwith this puts on your wifi? I have only have 35 mgb download speed, 7 mgb upload, and like to play fps games? So not sure if this would try and use too much bandwith?

Does it compatible with homekit?

WOW!!

Great video. How do you get the back light to turn off when the screen is black? With mines when the screen is black the backlight are still lit in a white color

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment! I'm glad you like the video! I don't think mine actually fully turns off, but I do have my white balance very low and saturation (i believe its called saturation) also very low.

What are your calibration settings?

I have the T1 Pro kit with light bars. Is it possible to purchase the M1 strip and replace the strip supplied with the kit with the M1 strip instead?

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment! I dont believe you would be able to replace them with the m1. I'm almost certain you could add the govee m1 strips to your setup but as far as using them to go around the tv/monitor to sync to the exact colors being displayed, that would not work.

Please tell me what background you are using at 3:03

Is there a lifx alternative to this. I already bought the lights but would live to do this.

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching! I'm not aware of Lifx having anything similar to this. I'm not 100% sure though. Maybe someone else that knows for sure can chime in if they are reading this!

Dope!

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment!

Hey Chris, I bought 4 sets of Govee M1s and the spotless diffusers based off your videos. I bought a T2 for the TV and am planning on syncing the strips. I am thinking about running the channels the whole way around the room below the existing crown molding. Would you recommend this? Or would you recommend going up the wall then back the room and not wrapping the whole way like in your basement?

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment! Sounds like an epic project you have planned! Hmm thats a good question! I think it just boils down to personal preference on what you think would look good. I don't think you could go wrong with either one but I would maybe try wrapping around the entire room first and see how that looks! I think that would look pretty nice with the crown molding!

Really love your unique setup! Although I am noticing the govee display a purple hue when there is no purple on the screen… are you seeing this as well?

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and yeah I notice that too. For sure check your white balance and saturation and play around with those but I mostly notice it during dark scenes where instead of just turning off the leds (must be something that cant be done at a software level) they have it set to display a purplish type color.

Could you add generic devices as sub devices? Or everything has to be govee? Thanks

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and great question. Everything has to be govve. Nothing else is compatible.

Hi there, nice setup you have there. I’m busy planning my setup, bit just got a question I haven’t found an answer for. Is it possible to add a light twice to match different parts of the screen? Example: led strip section 1,2,3 left side tv, 4,5,6 under tv, etc.

@ChrisMaherDIY

Жыл бұрын

Thanks for watching and great question. I think I understand what your asking and the answer is yes. Lets say I have 3 govee glide kits and I wanted to install all 3 under my tv. Each govee glide can be set up to match the same bottom part of the screen by selecting the appropriate numbers. Hope that makes sense!

@haleyagaming5204

Жыл бұрын

@@ChrisMaherDIY Thanks for the reply! Keep up the good work. Gonna subcribe too ;)

Where did you get the 1st video playing on your TV with the paint splashes moving around the screen? Is there a place where I can download that video from in 4k? Great video btw!

@ChrisMaherDIY

Жыл бұрын

Thanks so much! Here is the link to the paint splashes. I'm unfortunately not aware of where/if you can download it but you can certainly watch it on youtube! kzread.info/dash/bejne/o3dk2KaEhrOpoto.html

What did you use to edit this video Great vid btw❤❤

Will it still sync if you disconnect the dreamvirw strips? (My tv already has lights and I want it to sync my Govee stuff, I wanna know if I can sync without the strips)

@ChrisMaherDIY

Жыл бұрын

That's a good question! I have not personally tried it yet without the strips but in my mind, I don't see why it would not still sync if you don't use the dreamview strips. As long as you have the camera connected, that's all that should matter!

Awesome setup! Can I ask a question? I have the strip backlight and I want to buy the flow light bar. If I use the strip backlight as sync center and the flow bar as slave, do they show only dominant color or they have segmented color? (Like the strip backlight) thanks!

@tizio2332

Жыл бұрын

Can I also your settings? Your setup looks really accurate! Btw sorry for my broken English, that's not my main language

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching! So my understanding is that the flow light bar will only show 1 color at a time when synced up to the tv. I don't personally own the flow light bars so I'm not 100% sure but i think its correct. Maybe someone else on here can confirm that. What settings would you like to know? Thanks for watching and taking the time to comment!

@tizio2332

Жыл бұрын

@@ChrisMaherDIY thank you for the explanation. With settings I mean white balance and saturation , because your light looks really accurate! I also noticed it work way better with anime/animation movie rather than movie

AMAZING

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment!

@DropzPD

Жыл бұрын

@@ChrisMaherDIY Thank you for showing us govee!

Cooooool🤗🤗🤗👍👍👍👍thank you

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching! Glad you liked the video!

Awesome video! Is there a similar option that doesn’t require a camera?

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment! I know of a few that don't require a camera. One is made by philips and the other is lytmi. There are positives and negatives to all the different options so Its a tough call on which one is the best. I would say as far as performance, price and easy setup, I would go with the Govee brand as long as you don't mind the camera.

@DreGamer

Жыл бұрын

@@ChrisMaherDIY thank you for that information. I’ll check all of those out. You earned another subscriber!

I wanted to know what videos you used to test the tv, they all looked great but I can't find those videos at all, is there a term that would fit their description?

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching! I mostly just searched on KZread for Philips hue demo, govee immersion test, ambilight test. Here is one that I used in the video where I test the Govee t2 and its probably my favorite demo! kzread.info/dash/bejne/moOtz9yplc-YotY.html

Do you know if I can address the lights bars separately? I want to have one shelf be location 1, and the one under it be location 10. From the same light bar kit.

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching! If your talking about these light bars: amzn.to/3D3bk8d i'm honestly not 100% since I have not set that product up buy I would imagine you would be able to do exactly what you want with them. Having one bar set at location 1 and the other at location 10.

Does this allow you to sync non-govee lights that are compatible with smart home technologies?

@ChrisMaherDIY

Жыл бұрын

I don't think any other products would be able to sync through this dreamview but I think Govee's lights in general have some smart home capabilities so I think you could combine things like that (turn on, turn off, change color etc) but not do something like is being done in the video if that makes sense! Thanks for watching and great question!

Wow didnt know that you can connect evry led of them to this sync have to buy it know

@ChrisMaherDIY

Жыл бұрын

Thanks so much for watching and taking the time to comment! Yeah, they did a great job of making it very easy to do!

Can I ask if these turn on with the main immersion kit? or do you need to activate them via the app after turning on the main TV/camera kit? I would like to add some light bars to my immersion strip, but I would like it to be pretty much automatic after first set u, and turn on/off as one etc.

@commonlynasty7987

Жыл бұрын

As long as u leave it in sync mode yes they turn on with the immersion kit.

@ChrisMaherDIY

Жыл бұрын

They do all turn on when you turn on the main immersion kit! Thanks for watching!

@ChrisMaherDIY

Жыл бұрын

Yup! Thanks for your help!