Sway Bar Links Replacement on Jeep Grand Cherokee
Автокөліктер мен көлік құралдары
Replacing Sway Bar Links in a 2001 Jeep Grand Cherokee (WJ)
The Sway Bar Links are manufactured by Zone Off Road and were purchased from Fat Bob’s Garage. They are part number ZONJ5202-SBL642R.
4x4.fatbobsgarage.com/jeep-gr...
Tools needed:
18 MM Socket
18 MM Wrench
15 MM Socket
15 MM Wrench
Impact Wrench
Socket Extensions
Torque Wrench
The entire process took about an hour from start to finish.
Пікірлер: 22
A really good Video and nice looking Jeep ✅🇺🇸
@TheHappyLife-h7b
Жыл бұрын
Thank you for the comment and thanks for watching.
I used a Vice to press mine in. Good video✅🇺🇸
@TheHappyLife-h7b
Жыл бұрын
Thanks for watching!
Nice! Did the new links make it drive any better? Any noticeable difference in handling or cornering?
@TheHappyLife-h7b
11 ай бұрын
It definitely corners better but overall the ride is the same if not a bit stiffer. I almost never go off road so this set up works well for me. Thanks for watching!!
Hello, Which moog unit did you upgrade? can you share the link with me? Excellent videos
@TheHappyLife-h7b
3 жыл бұрын
Thanks for watching. I used the Moog SSD 107 from Rock Auto for the steering stabilizer . The sway bar links were from Zone Off-road.
I have the 2 inch puck lift on my WJ as well. Is it best to get the extended links as you did? Or does it matter?
@TheHappyLife-h7b
2 жыл бұрын
I don’t think it really matters as long as you are keeping it on the road.
Hello, I'm considering repeating as you did in your video here but I'm wondering since I have a WJ with a 2 in lift, did you find it necessary to replace the track bar with an adjustable version? I recently had a shop replace mine due to death wobble (which solved it at the time) but didn't think to consider if it needed to be longer due to that little bit of lift.
@TheHappyLife-h7b
3 жыл бұрын
I am going to do that next. Apparently it is not needed with a 2” lift but I noticed a very slight wobble above 55 mph or so. Thanks for watching!
@johnbarry2657
3 жыл бұрын
@@TheHappyLife-h7bthanks for the quick reply, from my research I saw that as well but I'm about to install the links and a new tie rod and dampener first so we'll see if that does the job. Good luck with yours!
@Bulletz4Breakfast13
Жыл бұрын
@@TheHappyLife-h7b hey can you please share your torque applied in Ft-Lbs for the upper nut and lower nut for the Rear sway bar links? I believe one is 40ft-lbs and the other 68ft-lbs but I'm not sure which. I found the front torque spec to be 78 Ft-Lbs upper nut, 78 Ft-Lbs lower nut.
Did you upgraded your steering stabilizer since you lifted the jeep?
@TheHappyLife-h7b
3 жыл бұрын
Yes I did. I upgraded to a Moog unit. However I did not do a video on that.....camera issues at the time.
@jesuslongorialozano6148
3 жыл бұрын
@@TheHappyLife-h7b Hello, Which moog unit did you upgrade? can you share the link with me?
@armandomendoza5879
3 жыл бұрын
Awesome thanks for the help
How are they holding up?Did they rust?
@TheHappyLife-h7b
3 жыл бұрын
No rust so far and thanks for watching!
U would have more room if you took your tire off.👍🏻
@TheHappyLife-h7b
Жыл бұрын
Thanks for the tip and thanks for watching!