Suzuki RM125 Carburetor Rejetting & Teardown
Автокөліктер мен көлік құралдары
Here's a video of the 2000 RM125 Keihin Carburetor torn apart. After a full Hot Rods Bottom end and Wiseco top end rebuild, I decided to dig into the jetting to ensure this fresh rebuild is safe in our temperature and altitude here in Alaska. Decided to increase the main jet from a 172 to a larger 175 for more fuel and a richer mixture to account for the FMF Fatty Pipe.
First time using the Hydrosonic cleaner, worked like a charm! Hope this video helps some of y'all. Like and comment if you enjoyed and subscribe for more content on projects like this.
Пікірлер: 37
i’m 30 seconds into the video and can tell your someone who i’m going to watch again. your very helpful thank you.
@backcountrybuilds
7 ай бұрын
Oh, hell yeah. I appreciate that. Thanks for watching
Great video! I recently picked up a 2000 RM125 and I am definitely running rich. Lots of spooge. I am trying to lean it out and was wondering if loosening my air screw would help? Loosening it more would bring more air to my knowledge but was trying to see how much to loosen it? I'm in the midwest and it's been quite hot this summer. Any recommendations on number of turns?
@backcountrybuilds
29 күн бұрын
Hi, thanks for watching. Glad you enjoyed! I’d first try doing some research on injection oil ratios. I’ve always run 32:1, which is pretty rich, but I’d rather have some spooge than a smoked engine! Best of luck.
@Shooobe
29 күн бұрын
@@backcountrybuilds I run Amsoil Dominator at 32:1! Bottle recommendation is 50:1 while Suzuki recommends 32:1. Maybe less oil would help spooge?
@backcountrybuilds
29 күн бұрын
@@Shooobe it’s a 2smoker, let her spooge!
@Shooobe
29 күн бұрын
@@backcountrybuilds you’re right lol. I’ll stop worrying about it. Thanks for the help!
Got a 2001 Suzuki rm125. Been looking for a new Carb. Found one from a 2005. Says it “will fit” was wondering if you know if true
@emitmillett9889
2 жыл бұрын
Yes it's true 👍
@backcountrybuilds
2 жыл бұрын
I actually do not know
I wish I never would have sold my 99 Rm 125. I loved that bike
@backcountrybuilds
Жыл бұрын
I wanna keep this thing forever and hang it from the ceiling so I can stare at it
What about this tiny 55 jet that came in my rebuild kit?
@backcountrybuilds
2 жыл бұрын
What state are you located in? Asking for the climate
You said a 172 was running it lean I got the same bike and I'm having the same problem so you have a 175 main jet what is your pilot jet
@backcountrybuilds
Жыл бұрын
www.revzilla.com/assets/0000/9539/fmf_gold_series_fatty_pipe_suzuki_rm1251996.pdf I believe mine was a 52. I actually just sold the bike two weeks ago! See above link. Hope this helps.
Can you tell me what does that solenoid do? I don't understand its function. thanks and regards
@JorgeMartinez-dl7qy
2 жыл бұрын
Hello, can anyone answer my question? the solenoid works, but I don't understand when it should do it. When activated, it closes the circuit, for what and when that is the question. I need help. Thank you
@backcountrybuilds
Жыл бұрын
Jorge, I’m not entirely sure. But, from what I’ve read, the TPS alters the timing at different throttle openings and rpm. The solenoid valve gives the mixture extra fuel to help the carb through certain lean spots. The solenoid valves opens and closes the power jet. The power jet is the jet (beside the main and pilot) to add fuel to the mixture. The solenoid closes the power jet between 2000-3000 RPM and 9250-10500 RPM. Hope this helps.
what is the electrical cable coming off the carb?
@backcountrybuilds
7 ай бұрын
“That's for the powerjet. It adds additional fuel when needed. The wire comes from, and is controlled by the ignition, It is turned on and off at a set rpm in the ignition box.” Thanks for watching! dirtrider.net/forums3/threads/1999-rm125-electric-wire-into-carb.140784/?amp=1
@owend_8
7 ай бұрын
@@backcountrybuildsThanks. I got a new carb and it didn't have one so i left it unplugged and haven't noticed a difference.
Mines been running like shit and i took the carb apart to find my jet is 170 is it possible its that i need to also swap it to a 175?
@backcountrybuilds
10 ай бұрын
www.revzilla.com/assets/0000/9539/fmf_gold_series_fatty_pipe_suzuki_rm1251996.pdf What year is your bike? What climate do you live in? I had to tune my bike when I moved from Alaska back down to the Midwest because of the temperature change.
What carb can I put on a rm125 2008 can’t find anything
@backcountrybuilds
Жыл бұрын
www.revzilla.com/assets/0000/9539/fmf_gold_series_fatty_pipe_suzuki_rm1251996.pdf Try this! Best of luck.
My 2000 suzuki rm125 choke isn’t closed completely is it normal or what?
@backcountrybuilds
Жыл бұрын
Having it slightly open should be the resting position, if I remember correctly. I think if it closed completely, the bike would stall.
@Tice55
18 күн бұрын
can you message me i have the same bike and i have a question
will a 1996 fit on a 2001 rm carb ??
@backcountrybuilds
Жыл бұрын
It appears with some research that they’re both 38mm. As for size, they may be compatible. However, look up “RevZilla RM125 jetting, as the specs might differ.” Also not sure if the Keihin/Mikuni have different bolt patterns, but maybe worth a shot depending on the price.
@reallyitzrowe
Жыл бұрын
@@backcountrybuilds ur the goat my boy thanks for the response
mm of the carburetor?
@backcountrybuilds
Жыл бұрын
From what I’ve read and heard, I believe it is a 38mm.
Kind of unnecessary taking the rear subframe off, you can push the airbox in on itself and remove only the carb.
@backcountrybuilds
2 жыл бұрын
That’s true. I always have trouble with getting the carb boot back on without the pursuasion of the subframe. Smart move though
@mikeg1575
2 жыл бұрын
@@backcountrybuilds its easiest to get it on the airbox, then the intake/reeds, dont tighten but rotate towards you and put the slide in. This makes it far less work, especially if you are having multiple carb issues..