Suzuki Cappuccino ENGINE owners faq.

I answer a few questions that many new Suzuki Cappuccino owners ask.
F6A twincam engine frequently asked questions.
/ 2259297573
groups/ClubC...

Пікірлер: 35

  • @danielsoriente2426
    @danielsoriente24264 жыл бұрын

    Speaking from experience as well, I had a huge boost leak from the Air Bypass Valve (the brown looking part on top of the engine, just above the turbo in this video) - so it's worth checking that out too. :) It was blowing open on boost, and allowing air past it. To solve this, I have temporarily blocked the valve off with a plate.

  • @zoomzabba452
    @zoomzabba4524 жыл бұрын

    Smoke test is my favourite way to solve boost/vacuum leaks. All of these suggestions are great for any "new to you" car.

  • @GarageKei

    @GarageKei

    4 жыл бұрын

    I found the smoke test to be very inconclusive... It's probably how I did it.....

  • @zoomzabba452

    @zoomzabba452

    4 жыл бұрын

    @@GarageKei remove air filter. seal smoke supply on Inlet tube. Let system pressurize. Watch for leaks. The longer you let it run, the more likely you can get it to fog out a leak. Just this week smoking a Subaru EG33 swapped in a VW Synchro Van. Fixed all the leaks, swapped the spark plugs and all the misfires went away.

  • @GarageKei

    @GarageKei

    4 жыл бұрын

    @@zoomzabba452 yea, sounds like how I did it... I'm just useless.... Lol

  • @zoomzabba452

    @zoomzabba452

    4 жыл бұрын

    @@GarageKei There are always the boost leaks that dont appear until you rip on it or there is considerable heat in the system. the real gremlins.

  • @joshuamelton7311
    @joshuamelton73114 жыл бұрын

    Plugs should be NGK Dcpr7eix

  • @georgeatsis5395
    @georgeatsis53953 жыл бұрын

    G’day Buddy..... 1st video I’ve come across where someone in Oz really knows their stuff. Thank you for the wisdom. P.S - Do you know where I can source a window switch? Window motor works. Switch is not getting power to the motor.

  • @GarageKei

    @GarageKei

    3 жыл бұрын

    Hi, I'm from Australia but live in Tokyo. Yea good source for a switch would be Yahoo auctions. If you need help with brokerage let me know on Facebook messenger. Oh and thanks for watching!!

  • @georgeatsis5395

    @georgeatsis5395

    3 жыл бұрын

    Garage Kei Thanks Mate...... I’ll give Yahoo Auctions a crack. If nothing comes of it, I might follow you up on that offer.

  • @cre8tivegarage157
    @cre8tivegarage1574 жыл бұрын

    Nice video bud

  • @GarageKei

    @GarageKei

    4 жыл бұрын

    Thank you. A lot more to come. This is barely scratching the surface of what I have planned.

  • @cre8tivegarage157

    @cre8tivegarage157

    4 жыл бұрын

    Most definitely gonna subscribe I. Am building my Na Miata

  • @GarageKei

    @GarageKei

    4 жыл бұрын

    Thanks man. I appreciate it.

  • @Nostalgicboii
    @Nostalgicboii4 жыл бұрын

    The F6A had an adjustable actuator!? Never seen that before :D

  • @GarageKei

    @GarageKei

    4 жыл бұрын

    Keen eye you have.

  • @c.j.6616
    @c.j.66164 жыл бұрын

    if mine is stock, should I try change anything you've stated in the video like "upgrade wise" fuel pump etc or should I be alright outside of regular maintenance

  • @GarageKei

    @GarageKei

    4 жыл бұрын

    Well the fuel pump is likely 20years old. I'd swap it. As with the filter. No one does that...

  • @Beniinc
    @Beniinc4 жыл бұрын

    I have replaced the fuel pump, fuel filter, leads, plugs, fuel reg, and it still has a hard time starting. And when it does start, it vibrates and idles rough. The only thing i think that needs to be replaced is the fuel injectors?

  • @GarageKei

    @GarageKei

    4 жыл бұрын

    ISCV? Tps? Check compression? Idle screw set too low?

  • @yaroslavprikhodko2514
    @yaroslavprikhodko2514 Жыл бұрын

    I am looking for spark plug wires, where can I pick those up from?

  • @GarageKei

    @GarageKei

    Жыл бұрын

    YAHOO auction or order through your local Suzuki dealer.

  • @MrOrangeman18
    @MrOrangeman184 жыл бұрын

    You missed the biggest issue. The waste gate. Every turbo I’ve ever taken off has a cracked wastegate recess. That always fucks with your boost. Causing huge lag and a struggle to make boost 👍🏻

  • @kekethetoad
    @kekethetoad2 жыл бұрын

    Are these engines really buildable and reinforceable? For bigger than ~110 HP - like say 200ish?

  • @GarageKei

    @GarageKei

    2 жыл бұрын

    Yes. Crank is already forged. If you put rods, pistons, and a headgasket in it they will take a huge beating. Over 200hp has been done, yes.

  • @mattjohns3394
    @mattjohns33944 жыл бұрын

    More info on Cappuccinos available at www.clubcappo.co.uk

  • @danielsoriente2426
    @danielsoriente24264 жыл бұрын

    Also - weird things in this video... Downpipe? Something funky going on with that throttlebody..

  • @GarageKei

    @GarageKei

    4 жыл бұрын

    Yep. You're correct. Downpipe is not Cappuccino. Throttle body is not Cappuccino. There are at least 2 more things.

  • @alxuria
    @alxuria4 жыл бұрын

    Fuuuu I want one so bad but importing into Australia is so wack

  • @GarageKei

    @GarageKei

    4 жыл бұрын

    Want one what?

  • @alxuria

    @alxuria

    4 жыл бұрын

    @@GarageKei Suzuki cappuccino there's only 3 for sale here

  • @72mardy
    @72mardy4 жыл бұрын

    What is this weirdness you speak of? Only weird thing I noticed is that it's sitting in your shed and not installed in my ST90 Carry van 😋

  • @GarageKei

    @GarageKei

    4 жыл бұрын

    It's a guessing game. Will reveal the weirdness in a future video.