Well done and explained. Enjoyed.

Old Mechanic, you were missed! I'm glad you're back. Hope you were just on holiday and not ill.

@TheOldMechanic

11 ай бұрын

Thanks 😉

My old mechanic, who is actually very young, every video you upload is a blessing. I read also your vid comments, and saw the vid diagram, the explanation was excellent👍 Editing and photography take a lot of time, and I also really appreciate this hidden part of your doing❤

@TheOldMechanic

11 ай бұрын

Wow, thank you! For some video's it takes more time to edit than the actualy time to work on the bike 😉👍🏻👊🏻

Too bad I can't give 2 thumbs up 😀. This takes the maintenance up to the next level. Really like these troubleshoot and fix videos to gain insight and knowledge.

@TheOldMechanic

11 ай бұрын

Thanks 👍

One and two not getting fuel but has spark would lead me to check the carb vent before removing the whole carb assembly but then again if the bike was stored on it's kick stand and not center stand, could have crud in those two bowls from sitting.

I got worried there Old Mac didn't see you for a few. I know this channel and family will keep you busy. This is a great video. I have done this once. I didn't ride for a year and left the bike sitting. Never did that again. I wish this video was out then. Can't wait to see the rest. Be Safe Sir. Randy

@TheOldMechanic

11 ай бұрын

Thanks Randy, I am fine 👍🏻👊🏻😉

This is spooky. I just finally got my 600 Bandit to run properly today, since March. I was dirty carbs in my case. Needless to say i have become very quick in removing the carbs. I did buy an ultrasonic cleaner, which worked well.

Been there before a couple of times with my old gsf600, although I did not have an ultra sonic cleaner instead I just used petrol and a gas canister for a refillable lighter to blow through the jets.

@TheOldMechanic

11 ай бұрын

Good tip 👍🏻👊🏻

So you are thinking that it is a lack of fuel due to clogged carbs? Im very much looking forward to the next video on this. Great video Old Mechanic!

@TheOldMechanic

11 ай бұрын

Unfortunatly there was a dead battery and leaking frontfork seals so the owner came over to pick his bike up. I can understand that, as money doesn't grow on your back. But I am sure that in time he will come back to me to fix the problems on his bike.

Komt er hier nog een hele playlist van? Will there be another whole playlist of this?

How fast can you get a suzhou banda motorcycle to go

No spark from one coil means no fuel? Hows that happen.

Hopefully someone can help me😂 on my 2001 suzuki bandit GSF1200 my 4th cylinders header isn’t getting hot. Just had the carbs rebuilt i checked for fuel i checked my Sparkplugs for spark and all of that checks out. Would adjusting the valves help at all or what. And yes i have good compression across all four cylinders

@TheOldMechanic

3 ай бұрын

I would start renewing the sparkplugs and the sparkplug caps. My son his 1200 righthand sparkplugcap often came loose, then the engine started to run on 3 cilinders. Also check the igniter coils / sparkplug cables. Let us know when you found the problem

@huntermoffitt8432

3 ай бұрын

@@TheOldMechanic i checked my coils last night and are good as well as i have new spark plugs in it. Took it for a ride and noticed my stator cover is leaking and needs a new gasket do you think somehow air is escaping too and causing it somehow. The bike hesitates when giving it lots of throttle. I synched carbs as well as all air/fuel mixture screws im at a loss what to do next. Probably another leakdown test on that cylinder it is about 20 lower psi than all other cylinders but still within spec

@huntermoffitt8432

2 ай бұрын

@@TheOldMechanic ended up pulling back off the carbs to double check and ended up just being that pilot jet was clogged soaked it and blew some compressed air through it put it back together no problems at all

Hallo.Sehr Informativ aber....warum sind deine Videos immer so kurz❓🤔

@TheOldMechanic

11 ай бұрын

Hello Ralf, because if I make them longer they become boring 😉👍🏻👊🏻

thats the simplest way to check if cylinder is not firing, use your hand. no need to buy a thermometer or waste water....LOL

@TheOldMechanic

5 күн бұрын

😉👍🏻