Be sure to tighten the mix screw till it bottoms out first count in half turns of the screwdriver till it bottoms out then unscrew it if its your first time doing this and you just unscrew first you wont really know how far to screw it bk in but with this method when you put the screw back in you just bottom out the screw and count backwards to get it in the position it was in before

Thank you so much! You’re a hero. I needed this so bad!

This is excellent information and well covered. I am trying to fix the same carbs on a 2004 GSX600F, and was given the old jets in a bag, and see the jets the user installed have no markings. Old jets are back in per your video, and on to the floats. Much appreciated. The wind didn’t bother me.

@DarrenMcKinney1

2 жыл бұрын

Glad I could be of help Tony

@floridaboyhernandez9550

Жыл бұрын

I also have a 2004 gsx600f trying to figure out the issues with it which brought me to this video, it's cranking but not wanting to start, petcock is fine,changed the spark plugs and still not starting. Could it be a carburetor related issue?

@tonymcalister9878

Жыл бұрын

@@floridaboyhernandez9550 Someone rebuilt the carbs before me, because their bike wasn't running. I suspected they were still not right, so I rebuilt them again. Unfortunately, they didn't set the adjusting screws the way they were before the rebuild and there is no reliable info online for the correct settings. It never would run. It is not my bike. I couldn't help. I would ship my carbs to the person who posted this video.

@young_chapo_jr7032

8 ай бұрын

late to the party but I'm on a 02 gsx600f that was running around 4,000 idle a couple of days ago now it won't start and it's leaking gas

@tonymcalister9878

8 ай бұрын

We had one carb leaking at the drain screw. I bought new ones, but it did not fix the problem. Sold the bike as is at a significant discount.

Thank you very much!! You are amazing!!!!!

Video was great to follow, but i have had to admit defeat after the 4th time of trying to stop it leaking after the overhaul. Learned a lot though thanks for the tutorial. Let hope the garage does a better job :-D

@boki69ful

10 ай бұрын

I've already repaired the carburetor on the Bandit 1200 three times. I've learned a lot, but the problem keeps repeating itself. The worst engine, I later found out that this is a common problem on the Bandit...

Only just found you fella but then haven’t been looking before now. My lad has got a 750 version so this and your other videos will be really useful. Thanks 👌🍻👍

@DarrenMcKinney1

2 ай бұрын

Glad to be of help

Perfect thanks alot my turn same carbs for me and all the info i need from you thmbs up !

@DarrenMcKinney1

2 жыл бұрын

Glad I could help you out

Thanks for this, I have a bandit 600 that's been running terrible. I need to attempt this.

Thanks for sharing.

Great video

@DarrenMcKinney1

10 ай бұрын

Thank you

Nice video fella gonna take a look at mine as got number 1 cylinder isn’t fueling right gone through new plugs and good spark but getting no heat through header pipe so can only assume it’s carb related doubt be compression as bike has been sat and ram great before

@DarrenMcKinney1

Жыл бұрын

Thanks. I’m Glad you liked the video.

Awesome video. I'm about to clean my first set of carbs on my FZ1 you made it look a lot less complicated then others, just curious on what you used to clean everything seems to be mix debate from everywhere that i have looked

@DarrenMcKinney1

2 ай бұрын

Thank you very much. I’m glad I could be of help. I find Brake cleaner will do fine for most of the cleaning but proper carb cleaner is better for removing the green or orange stains.

You are the best at teaching, you example everything so perfect!!!

@DarrenMcKinney1

3 жыл бұрын

Thanks Pierre

Do you have a disassemble video of taking the carburetors off the brackets. I don’t remember how my springs went in the middle that works the butterflies

can you do videos on how you dissambled and re assembled the bike to remove its carbs

@DarrenMcKinney1

3 жыл бұрын

Hi Jason. If you check out my restoration videos part 1 and 2 it will show you how to do it as they cover disassembly of the whole bike. Let me know if this helps

My katana was running real crappy and thought I needed to rebuild carbs, replaced the throttle position sensor and it made a big difference, no more back firing when I let off the throttle and back to snappy throttle response. wasn't looking forward to rebuilding the carbs.

Vivo en Houston cuanto cobras por hacer los de mi katana 750 2006

Need advice have two 05 katanas 600s both are loading up dumping fuel into air box and then into my oil have not messed with carbs only idle adj somebody tell me how to solve please

@larrywoods8685

3 жыл бұрын

Both my 05 katanas ran fine now dumping fuel into air box then my oil idle adj knob is only thing I've moved need advice help a guy out please

@jerryking1434

3 жыл бұрын

Foat or floats are sticking .. causing an over fuel problem.. Good luck...

@TheRightWayToPLay101

2 жыл бұрын

Fuel petcock diaphragm failure

How many turns are for the pilot screw

@DarrenMcKinney1

3 жыл бұрын

I have mine set at 2 and a quarter turns out which works well for me but I also know of a few people with their screws at 2.5 turns out.

Sir what number of main jet thank you

@DarrenMcKinney1

Жыл бұрын

The main jets as standard on the 98 Suzuki GSX600F are 115 in carbs 1 & 4 and 112.5 in carbs 2 & 3. I hope this helps

Preciso dos carburadores d gsx 750 1993 alguém aí pra vemd um pra minha moto e caixa d filtro d r também

Looks like the same carbs on the fz1.

s4

How many mms did he say?