Surveying with a R8s and R12 Base with a R12 Rover
Does a R8s base work as well as a R12 base? Using the Swap base feature in Trimble Access we shall see if there is a difference.
Жүктеу.....
Пікірлер: 31
@francisconunez31534 жыл бұрын
Thanks Robert thats how I have it R8s full base and R10-2 with R12 upgrade as a Rover and I love it, thanks for your videos!!
@DjWangYT4 жыл бұрын
Thank you very much for this one! Always wanted to know :)
@zachtucker41593 жыл бұрын
You're the man Robert! Thanks!
@AboveTheBigSky3 жыл бұрын
Great video Robert. I'm a bit behind on the "whats new" from Trimble. Pretty sure I see an R12 in my immediate future. That ProPoint tech is amazing... and a must have for working up here in NW Montana.
@RickMarshallMaps4 жыл бұрын
Thanks for the great information
@sammcsam24194 жыл бұрын
Love your t-shirt Rob!
@SurveyingWithRobert
4 жыл бұрын
Sam Mcsam thank you, it was a gift from Trimble
@passingmongoose3 ай бұрын
If you run two bases, on different frequencies, you can avoid dumping the rover and merely switch radio frequency, and immediately take a subsequent rtk shot, and now you truly have statistically independent connections to that monument or control point without waiting for a sidereal time lapse.
@SurveyingWithRobert
3 ай бұрын
You are referring to duel bases or duel vectors. You have to offset one of the radio signals, both on the same frequency and use swap base.
@medicated2664 жыл бұрын
This is such a good video, we'd usually run a repeater on highway work (linear feet mostly, straight highways) but now, if we could run two bases with radio - this would be amazing! Thanks for always posting good vids! Your SX10 video helped me out with scanning issues on an overpass in Madisonville, TX
@SurveyingWithRobert
4 жыл бұрын
jackson whalen when I introduced you guys to cell phone you will be blown away. 20 miles from your own base!
@christopherclements71553 жыл бұрын
Hey Robert, for the gnats, ORS makes a product called Smooth-N-Hold Pudding. It can be found at Walmart or Family Dollar in the ethnic hair care products. I live by this stuff
@SurveyingWithRobert
3 жыл бұрын
Thanks man! I will give it a try!
@AboveTheBigSky3 жыл бұрын
Robert, I have some R6 Model 4 receivers that track all constellations. Would these work in the same way as the R8s as a base for the R12?
@tanertaskesen215211 ай бұрын
Hi, is it possible to use the r12 together with the r10? this is what i got and i would like to use it this way. is there any way i can read how this is done? i am very new to this all...
@SurveyingWithRobert
11 ай бұрын
Just set the 10 as a base and 12 as a rover. Follow the video I have on the R10-2 setup. R10-2 are pretty much a R12 and they all work the same. Hope this helps.
@munther_aldlimi4 жыл бұрын
Is that mean transmit delay not effect on precision or accuracy ? ... can you explain more about transmit delay .
@SurveyingWithRobert
4 жыл бұрын
It’s just an offset in the broadcast of the radio. Has no effect on the data just how it’s sent out.
@munther_aldlimi
4 жыл бұрын
@@SurveyingWithRobert thanks
@makatogonzo2 жыл бұрын
Can the rover swap base with a different channel rather than different delay?
@SurveyingWithRobert
2 жыл бұрын
No have to the same. Rover can only hear one channel at a time.
@makatogonzo
2 жыл бұрын
@@SurveyingWithRobert Good to know! Thanks.
@JAVIERCDELVALLE3 жыл бұрын
WHY YOU ADD 250 MILISECONDS TO THE SIGNAL DELAY
@jlmeyer7
3 жыл бұрын
You would do this if using the same channel for the radio so that your rover can use either base. Source:Trimble website.
@tryagain97373 жыл бұрын
Confusing with Robert
@SurveyingWithRobert
3 жыл бұрын
Excuse me?
@stevenconnell3206
Жыл бұрын
You couldn’t fill his shoes..
@seanjohnson9401 Жыл бұрын
Can you use the new R12i as base and R8 as rover?
@SurveyingWithRobert
Жыл бұрын
Don’t know why you couldn’t but that’s not the best way to use it. More power at your rover with a R12i. Unless you have a rover only R8.
Пікірлер: 31
Thanks Robert thats how I have it R8s full base and R10-2 with R12 upgrade as a Rover and I love it, thanks for your videos!!
Thank you very much for this one! Always wanted to know :)
You're the man Robert! Thanks!
Great video Robert. I'm a bit behind on the "whats new" from Trimble. Pretty sure I see an R12 in my immediate future. That ProPoint tech is amazing... and a must have for working up here in NW Montana.
Thanks for the great information
Love your t-shirt Rob!
@SurveyingWithRobert
4 жыл бұрын
Sam Mcsam thank you, it was a gift from Trimble
If you run two bases, on different frequencies, you can avoid dumping the rover and merely switch radio frequency, and immediately take a subsequent rtk shot, and now you truly have statistically independent connections to that monument or control point without waiting for a sidereal time lapse.
@SurveyingWithRobert
3 ай бұрын
You are referring to duel bases or duel vectors. You have to offset one of the radio signals, both on the same frequency and use swap base.
This is such a good video, we'd usually run a repeater on highway work (linear feet mostly, straight highways) but now, if we could run two bases with radio - this would be amazing! Thanks for always posting good vids! Your SX10 video helped me out with scanning issues on an overpass in Madisonville, TX
@SurveyingWithRobert
4 жыл бұрын
jackson whalen when I introduced you guys to cell phone you will be blown away. 20 miles from your own base!
Hey Robert, for the gnats, ORS makes a product called Smooth-N-Hold Pudding. It can be found at Walmart or Family Dollar in the ethnic hair care products. I live by this stuff
@SurveyingWithRobert
3 жыл бұрын
Thanks man! I will give it a try!
Robert, I have some R6 Model 4 receivers that track all constellations. Would these work in the same way as the R8s as a base for the R12?
Hi, is it possible to use the r12 together with the r10? this is what i got and i would like to use it this way. is there any way i can read how this is done? i am very new to this all...
@SurveyingWithRobert
11 ай бұрын
Just set the 10 as a base and 12 as a rover. Follow the video I have on the R10-2 setup. R10-2 are pretty much a R12 and they all work the same. Hope this helps.
Is that mean transmit delay not effect on precision or accuracy ? ... can you explain more about transmit delay .
@SurveyingWithRobert
4 жыл бұрын
It’s just an offset in the broadcast of the radio. Has no effect on the data just how it’s sent out.
@munther_aldlimi
4 жыл бұрын
@@SurveyingWithRobert thanks
Can the rover swap base with a different channel rather than different delay?
@SurveyingWithRobert
2 жыл бұрын
No have to the same. Rover can only hear one channel at a time.
@makatogonzo
2 жыл бұрын
@@SurveyingWithRobert Good to know! Thanks.
WHY YOU ADD 250 MILISECONDS TO THE SIGNAL DELAY
@jlmeyer7
3 жыл бұрын
You would do this if using the same channel for the radio so that your rover can use either base. Source:Trimble website.
Confusing with Robert
@SurveyingWithRobert
3 жыл бұрын
Excuse me?
@stevenconnell3206
Жыл бұрын
You couldn’t fill his shoes..
Can you use the new R12i as base and R8 as rover?
@SurveyingWithRobert
Жыл бұрын
Don’t know why you couldn’t but that’s not the best way to use it. More power at your rover with a R12i. Unless you have a rover only R8.
@seanjohnson9401
Жыл бұрын
@@SurveyingWithRobert thank you!