Your as serious as I am on feeding. I thoroughly enjoyed this ma'am. High quality food is so essential in the health, looks and happiness of our fish! Thank you for this video!

Excellent information as always!

@CreativePetKeeping

5 жыл бұрын

Thanks!

Great tips, Kasia. Love your informative videos and all your sweet pets of fur and fins. We’ve been following you for a long time. Thank you for all you do. You, and Little Foot, and Banana always make me smile.

Very good information. I am a betta breeder myself and this is good. New breeders might want to keep the bubbling rate low or off when the eggs are laid until they’re strong enough to swim through a current otherwise they could get stressed. I accidentally killed my first spawn that way. Also new breeders should keep the water level at around 4-6 inches deep since the male has to swim down to get the eggs and bring them back up to the bubble nest, and that can be tiring for him. I also have the same brine shrimp hatchery and I put BBS eggs in at 8 pm and they are hatched and in the center at 8 am. I highly recommend it to any fish breeder that needs BBS to feed their fry.

@CreativePetKeeping

5 жыл бұрын

I agree that I am probably letting mien bubble way to much. I'm going to turn it down too.

@angelas4694

5 жыл бұрын

Good idea. I wish you the best of luck with your future spawns, betta or not!

Excellent advice! Enjoyed watching. Thank you for sharing!

I looooove Little Foot. She is a betta whisperer.

I love you channel and your entire setup! I’m looking for a muscle rack that can hold about five of the 10 gallon tanks on each because I need/want about 15 tanks. Thanks for all the videos you make!! It’s encouraged me so much with my betta journey!!

Something that I've used pretty effectively: Using a 10gal or 20L and a Matten filter/foam. I've used it to partition off the area I want to keep the fry (the foam keeps them from swimming to the other side) and then add more space for the fry as they grow. You can use the foam as a Matten filter for double duty. The larger water volume also means you can use a bigger/adjustable heater more easily.

@CreativePetKeeping

5 жыл бұрын

THIS!! What a GREAT idea!

@mackenzieferguson4599

5 жыл бұрын

@@CreativePetKeeping I can't find the SUPER dense foam near me, but I've found decent stuff at pond supply stores. Since the pond filters are so much larger, the foam pads are larger and thicker too.

@myhomeaquarium98

5 жыл бұрын

One thing I was wondering is if keeping a partition would also make water changes easier as there wouldn’t be any fry in the area you were syphoning out. And also more surface area for BB.

@CreativePetKeeping

5 жыл бұрын

@@mackenzieferguson4599 I bet I can find some at the next fish swap!

@mackenzieferguson4599

5 жыл бұрын

@@CreativePetKeeping For sure! Even if you can only find the filter foam, it's easy enough to make a DIY lift (I used the King of DIY's tutorial) Just make sure to measure twice cut once lol!

Love it can't wait to see what the new year brings for your projects! Also you have the best supervisor! 😍

(Affiliate Link) Most of the supplies can be bought on Amazon. Click the Betta Breeding category! www.amazon.com/shop/creativepetkeeping Digital Temperature Gun Thermometer: amzn.to/2EqRVjn Submersible Aquarium Heater (50W): amzn.to/2EpCS9q Sponge Filter: amzn.to/2U4gGar Digital Aquarium Thermometer: amzn.to/2XiPUNx Water Conditioner: amzn.to/2U30Tc5 Catappa Indian Almond Leaves: amzn.to/2NkJNUx Brine Shrimp Hatchery Dish: amzn.to/2U32LBx Brine Shrimp Eggs: amzn.to/2U39f3n SALT: amzn.to/2U2hXyH SALT (cheaper alternative): amzn.to/2VbajlO Baking Soda: amzn.to/2E9NHLQ Repashy Spawn & Grow: amzn.to/2TYfJ3o Methylene Blue: amzn.to/2U2wj25 For conditioning the pair: Selcon: amzn.to/2Nn9l3g Freshwater Vitachem: amzn.to/2E2Mbeg Seachem Garlic Guard: amzn.to/2EnVvdV

Thanks for sharing, I enjoy your fish themed vids the best :)

Wonderful video, loads of info!!!

Awesome info. Very detailed, thank you.

That was the most positive rant that I have ever watched. 😃

Very informative video. Thanks for sharing all the helpful info.

I have the same bbs hatchery. Works great! 👍

LOVE THIS SERIES ,and very informative;)

I love betta fish! The are so beautiful 😍

I love this video, given that others are trying to breed this is a good refreshment for the amateurs.... like me, hehe.

Try to watch Dexter's world.

This is so neat and informative Kasia, thank you!

@CreativePetKeeping

5 жыл бұрын

Glad you liked it!

thank you so much for this video

Well presented informations

I’m your new follower and I loved every video you do.Thank you for sharing

@CreativePetKeeping

5 жыл бұрын

I hope you continue to like my future videos!❤

Love your channel. Thanks for the info! P.S.: Lil' Foot is freakin' adorable. I miss having cats. :(

Great video, Great information!!

I like the white bettas

can't wait to see your newest spawn!

@CreativePetKeeping

5 жыл бұрын

Im super excited!! Hopefully they will breed next week.

Do you need live food for the baby? Pr can u use frozen baby brime shrimp?

@HeyItsCharlie

5 жыл бұрын

Miss Universe Moments I’m curious as well, but not just brine shrimp, I’m just curious if you can use non live food

great video thanks for sharing! subscribed :)

Very well. And you looking beautiful also.

Since I’m half Thai and half American, I’ll do the middle ground and use a 2.5 gallon 💚🇺🇸 🇹🇭

This is exactly what I wanted! I knew mostly everything that I needed except a way to heat the temporary tank/jars so I’m glad there’s so heating tape. Question: I already have a large 13 gallon or less adjustable heater, do I need to buy separate ones for each jar or is there a way I can heat all of them together without the room being 80-ish degrees?

Very informative video for us nieve people who knows nothing about betta breeding. Very well made videos

@CreativePetKeeping

5 жыл бұрын

I still consider myself a betta breeding newb lol

@carlhanzrivera4746

5 жыл бұрын

You do a very good job at educating us about fish and other animals.

Hikari Blood Worms are grade A, but their Brine Shrimp are grade B. San Francisco bay has Grade A brine shrimp, and grade B blood worms. Just FYI. Not everything Hikari is good.

Awesome brine shrimp hatchery where could I find one but love love your platinum betta frys so pretty .

@modcatsauce

5 жыл бұрын

I ordered mine from Amazon. Artemia hatchery.

Littlefoot knows they are a star.... it's all about the cat on the internet

Good content...writing down...lol

Yeah !😁 New video!

@CreativePetKeeping

5 жыл бұрын

Wooo hoo!! If all goes well. I will have ANOTHER NEW video on monday!!

@aquaticexpress

5 жыл бұрын

@@CreativePetKeeping Yea ! Hopefully all goes well ! Wishing the best . 🙂

Excellent information. What temperature should the breeding tank be? For the fry? Also what is the name of the fry food? The crushed up one. Dr. ??

Quick tip. If you want the best for your fish unfreeze the food first. Ice crystals are not good for them.

Morton's all natural canning and pickling salt (no preservatives) can be used instead of the expensive salt that is sold at your lps/lfs for fish. It is so much cheaper. I use to purchase this a lot when I kept goldfish.

@CreativePetKeeping

5 жыл бұрын

great idea!

@sunnycal2293

5 жыл бұрын

@@CreativePetKeeping It really is! When I use to be on a goldfish forum that's what a lot of us used and would tell new fish keepers this. If I remember correctly 3/4 teaspoon of Morton's equals 1 tablespoon of aquarium salt from lps/lfs.

The black stands like you have your shellies in, how long have you used them? Do they work pretty well with the 29 gallon long? Thanks!

Great video Kasia, I love you tank room it is very nice and neat. I have a question, I breed a pair of Betta's and they hatched Nov. 2ND I have one that I noticed when he swims his back end Sachs a little bit i think it's SBS, what can I do

@CreativePetKeeping

5 жыл бұрын

Sadly you will have a few babies with issues. Some will just waste away and die..nature will take its course. If its only one then good..if you start having a lot do that then raise the temp and feed less BBS.

I haven't been here in a long time 😖 I feel bad good video though

I LOVE THE NAME BANANA!!!

tfs😊

I would love to breed! It’s just that the market for bettas is kind of saturated :/

Off topic: I love your cichlid tank

Hard boiled egg yolks works as well you just have to do more water changes

@CreativePetKeeping

5 жыл бұрын

Ive never tried them myself but heard it works. Are there any issues with getting the fry to eat it or do they take to it easily?

@amberarmstrong4234

5 жыл бұрын

@@CreativePetKeeping they seemed to take it pretty easily you do have to liquidize it before adding it to the fry tank it kept them alive until my fry food arrived

@CreativePetKeeping

5 жыл бұрын

Thats good to know. It will be a good backup in case I were to loose my live cultures oneday.

I feed frozen and tetra brqn flakes or granules to all of my fish. my bettas attack the syringe for the frozen food after I thaw it in warm water.

Where did you get those cute little water lettuce?

So a filter and heater foor the babys only???? Not for the honey moon tank???

You can't buy General cure in Canada anymore because people kept using it to treat themselves instead of fish x"D

@CreativePetKeeping

5 жыл бұрын

All over the world countries are starting ro ban fish meds

@StarlightBettas

5 жыл бұрын

@@CreativePetKeeping its pretty lame, especially when its because other people are using it for things its not meant to be used for. it just ruins it for everyone else and that sucks.

Also, after you use up the food that is in the jar, how do you personally sanitize it? Whenever I try it, the smell from the food that was in it always lingers! Im not sure if that is safe or not so I havent used it. I want to breed bettas in the future :)

@CreativePetKeeping

5 жыл бұрын

I was the jar a few times (minimum of three) the last time i rinse it with diluted bleach and then leave it open to air out for a few days

My friend just got guppies and her mom got 2-3 girls and 4-5 boys they have in total seven and I did my fair share in research in guppies and almost all videos I watched said 1 male to 3 girls so if she gets pregnant they can go to another female and not stress the pregnant mama out. I pointed out to my friends that one of them were pregnant, we all seen little fish in her. When she showed her mother she said “no! That’s a male the males have long tails and we only have one female” this was all wrong, he fish she pointed out was still almost a fry and almost all the males were chasing her and i felt really bad for her. Later that night we seen the little fry be cornered in the 100+ gallon tank (great size tanks i was impressed) and probably mated with we tapped on the glass to get the males away (which was a bad idea) and failed... I’m pretty sure the other female guppy with give birth soon, my friend is getting more fish I dunno what to think of it. They also have two mice, one male and one female in separate crittertrails and mesh wheels, her older sister also has a Syrian hamster in a maybe 10 gallon tank... they mean well but I wanna say something, they have access to internet and info to properly care for all the animals they have. But I was their guest so I didn’t want to insult them in their own house. So I didn’t say anything I’m so sad with myself because all of their animals are active and so adorable!

What were the meds u had?

Have U ever breed betta in a 2.5 gallon tank with haft the water in it , it will be so much eazyer to care for the baby

Are your racks have wood and metal frames

@AmmyWolfable

5 жыл бұрын

They are metal but i believe she has wood underneath some of the tank to help with weight distribution

between putting the male and female bettas in there tank to jaring the betta fry if you breed them successfully how many months would it take to finish?

@CreativePetKeeping

5 жыл бұрын

Some breeders are ready to sell st 3 months if they powergrow but usually it takes me 6 months.

@snowballstrikethebudgies9698

5 жыл бұрын

@@CreativePetKeeping Creative Pet Keeping thank you for your information but that isnt what I ment to say I see why you thought I asked that. I ment to say how long does the whole process take in months from when you get the breeding pair of Bettas to jarring the babies. I hope that didn't sound rude it was hard to word.

Can I breed in a 30 gallon tank

How do you know if the flow for the filter is too strong? How do you know if the sponge filter is an appropriate size?

@CreativePetKeeping

5 жыл бұрын

The sponge filter can be any size that fir well with the lower water level. The more sponge the better because it means a bigger surface area for bacteria. In terms of the bubble flow, you dont want to disturb the water too much but you also want to be able to circulate the water because the heater can burn the babies.

@fiftyshadesofgay9193

5 жыл бұрын

@@CreativePetKeeping So basically just make sure there is slight surface agitation but not everywhere? [I'm using this knowledge for also my grown male bettas]

@CreativePetKeeping

5 жыл бұрын

Yup!

@fiftyshadesofgay9193

5 жыл бұрын

@@CreativePetKeeping Alright, thanks! Hope you have a great rest of the year!

While breeding small rocks should remove or what

@kayvercetti1645

5 жыл бұрын

leeladhar acharya yes you shouldn’t have any rocks or sand in the breeding tank because eggs can fall and get lost. just the bare glass and some hiding places

Can a betta live in a 10!gallon I have restrictions on having 5 gallons only could they live like this full time not breeding though

@brijohnson340

3 жыл бұрын

I have a bubble filter for filteation

Interesting to know that bigger than a 10 gallon isn’t a great choice.

@CreativePetKeeping

5 жыл бұрын

From what I have heard from other breeders, especially Moon River Bettas, fry have a harder time finding food in a bigger tank. There seems to be a better growth rate in smaller setups.

Kasia when are you going to breed the Betta's?

@CreativePetKeeping

5 жыл бұрын

I actually need to make an update on that very soon. The male I wanted to breed is showing signs of genetic health issues. So I think I'll breed a different pair as I do not want prodce unhealthy bettas.

@SandySwauger9644

5 жыл бұрын

@@CreativePetKeeping I just got a cute little blue/black dragon PK female. Would love to spawn her. But i dont have a male i would want to breed her to yet. Check out a pic of her on my Instagram 2_appys_1aussie

if you show your all fishs

No step by step tutorial on how to Breed a Batta ? i rather prepare daphnia and mosquito larva

@CreativePetKeeping

5 жыл бұрын

I have some past videos on breeding them. Im still a beginner myself ^_^

You should breed guppies! (I’m a guppy breeder) it’s SUPER addictive. And, a lot easier lol. Annnddd, the come out with crazy colors.

I hope your cat didn't eat the fish...

@Aidith_Diversity

4 жыл бұрын

Just kidding