We recently lumbered a 36" maple, a 36" white ash, and a 32" pecan. After drying, we tried planing with a Rigid (Home Depot) 13" planer with 2 HSS knives kzread.infoUgkxIzvvTi3_Qc8JnVdYYRJCvuoDC4QjTzeL . This job was clearly too much for that machine. The pecan was particularly difficult, due to heavy mineral deposits, and a sharp pair of HSS knives would be consumed by a mere 3 boards. We were also having lots of problems from chip bruising, due to poor dust collection. The shavings came off like straw and jammed in the 4" hose.We bought the DW735 simply to be able to run carbide blades, which worked brilliantly for the pecan. However, we found it to be a much, MUCH nicer machine. It was far more rigid than the "Rigid" planer, and far more accurate as well. But what I liked most about it was the dust feed. This machine has its own blower, which shreds the "straw" like shavings as they come off the cutting head and helps boost the shavings into the dust collection system. No more clogs! It's also nicely sealed so that the internals stay quite clean. This is just a well tempered machine that's a delight to use. It literally cut the labor in half. Just another example of getting what you pay for.

I was happy how you explain that quick way to find the correct thickness to set the planer. Lowering it onto the wood until it engages. Then a little. Brilliant !!

@NextLevelCarpentry

4 жыл бұрын

Can't be beat Michael... once you make it a habit you'll save a considerable amount of guessing and frustration... at least I did. 😎 Best, Matt

I'm just now getting into woodworking and carpentry and I am learning VOLUMES from your content. Being new to the craft, your emphasis on safety is greatly appreciated.

Now why didn’t I think of that? How simple and helpful this video is. Thank you so much for taking the time.

As a person new to planers and jointers, this is such a great idea, thanks for sharing !!

A fantastic idea to flatten wider boards that your jointer can handle, thanks for sharing this.

Genius, I have watched dozens of other vid's to supersize jointers but they all fall far short of your simple method. You are a master please keep the video's coming

@NextLevelCarpentry

6 жыл бұрын

Thanks Tom; I've always felt that part of 'mastery' is sifting through many options to dial in to the one that's most effective and efficient and then tuning that best option to optimize it for the task at hand. The Irish carpenter I learned much from in my formative years referred to it as 'getting a system' for a given job. Sounds like you're doing exactly that... hope you're able to do better work faster using this method next time you encounter over-width boards. Best, Matt

So much for not going into deep details. But I am sure glad you did. Because I learned something new today that will save a lot of time. Thank you for sharing your talents and experience.

@NextLevelCarpentry

6 жыл бұрын

Yeah, so much for 'keeping the video short' too, right? Can't help myself 😏 You're welcome, Jesse! Best, Matt

Awesome idea! I had ruled out any jointers less than 12" because I didn't want to have a jointer that couldn't flatten a board that is less than the widest board I'd run into for my purposes. I was pretty much resigned to the idea that I'd have to get a 12" jointer/planer combo machine to get the most out of one machine and save some money. This video gives me all new reason to start reconsidering buying separate machines with smaller capacities. Very cool and extremely informative. Thank you sir:)

@NextLevelCarpentry

4 жыл бұрын

Good on you for thoughtful consideration of machinery choices Luis. My reasoning in choosing an 8" model is that no matter how big a jointer I got there would ALWAYS be a time when I needed the next size up. I developed this method back when I had a 6" jointer and frequently found myself working a bunch of material over 6" wide. It was more practical to upgrade the jointer than use this process for so much and so often; it might have been 30% of the time? Jumping up to 8" capacity means I only have to use this method like 2% of the time so the trade off is painless. With that in mind I'd think through what you expect the majority of your projects to be and choose something that's efficient for say 95% of your work and get the best quality machine you can afford for it. No need to get a 12" model that you need once a year. BTW I'd choose a 6" 'parallelogram' style jointer over an 8" model without that feature ANY day. Adjustment with a parallelogram style is SO much more efficient it would offset the wider capacity immediately. I highly recommend a helical head for any jointer as well... it increases performance dramatically and is well worth any extra cost if you can afford it. Best, Matt

Thanks for another great tip. I am looking at getting a Jet JJ-6HHDX 6" Jointer with helical head and a DeWalt DW735X Planer. Your tip will save me from ripping then re-gluing wider boards.

@NextLevelCarpentry

6 жыл бұрын

You're totally welcome, Mark! I think you'll be quite pleased with what you're able to accomplish with the setup you describe and using this method. You should be able to push the limits of this and flatten stuff 10" or so using a 6" jointer. As I mentioned I've done some pretty wide stuff by cantilevering off the 8" platten 4~5 inches. The wider the piece, the lighter the pass. You can imagine/visualize the physics as you approach 100% cantilever as the feed rollers want to equalize pressure and tend to tilt the workpiece but if you're paying attention and 'sneak up on it' you can push the limits and still get great results. If you get into some gnarly/wide stuff there's always the method Hardnox describes in his comment below. Best, Matt

Great tip thanks. I was just in the shop today working on a few cedar slabs that I need to get in order for a table and wondering if I could do something like this and then found your video. Gotta love KZread

@NextLevelCarpentry

5 жыл бұрын

Sweet! Thanks for letting me know... lovin' The Tube! Best, Matt

Very nice idea , well done Matt .

Great tips,thanks for sharing ,cheers Colin.

Awesome tip I usually use a hand plane after which works great but after a inch or so like 9” - 9 1/2 it can take awhile definitely going to make this setup. Greatly appreciated take care my friend

@NextLevelCarpentry

6 жыл бұрын

You're totally welcome, Thom, hope you are able to get more done quicker with this method over the hand-plane technique. I've really pushed the limits of this method for the 'gnarly' boards I mentioned and am always pleased and amazed by what I'm able to get away with using it... as I'm sure you'll be. Best, Matt

Good idea. I only have a mounted 3.5" jointer and just got a planer so this tip will help me flatten bigger boards until I can afford a bigger jointer.

@NextLevelCarpentry

5 жыл бұрын

Just cool the way that works, isn't it Chris? Same process I went through starting out a ridiculously long time ago with a 4" delta machine. Best thing is you'll be better off in the long run learning to work through this adversity than you would starting out with a 8" or 12" machine... it may be some time before you believe me but I think someday you'll find it true. Best, Matt

Another Great tip Matt..one that will help me down the road...Take care stay safe!😉

Once again, as always. Another incredibly helpful tip and video.

@NextLevelCarpentry

6 жыл бұрын

Thanks for commenting, Jon! Best, Matt

This is a great idea! Thank you for sharing it with us

Thank you for the video. Working on a project now with really wide boards and thinking about spending $10-15K more on bigger jointers and planers...NOT! I appreciate your tip. Liked and subscribed.

Thanks so much, I just got a planer and a jointer and was trying to figure out how to do this. Great tip.

@NextLevelCarpentry

4 жыл бұрын

Those two machines will really up your game Shayne... have fun, work safe... and keep watching NLC videos? Best, Matt

Thank you for this video. I was stressing about the price of a 10”+ jointer. Most of what I need to flatten is

@NextLevelCarpentry

4 жыл бұрын

RnBergman: my reasoning is exactly like yours! I recommend getting the best 8" jointer you can afford and a helical cutterhead with rabbeting capability like the Byrd Shelix design... that's imperative if you plan to 'supersize' it. Also; unless the jointer has parallelogram adjustment capability you'll be frequently frustrated by slow depth of cut adjustments which you'll need a LOT for this type operation. In an act of shameless self-promotion I'd ask that if you happen to settle on a Powermatic PJ882 like you see in the video and don't buy it locally I'd sure appreciate it it you'd use this link: www.amazon.com/dp/B0007DHHEM/?ref=idea_lv_dp_ You get the same low online pricing and free shipping from Amazon plus they help support production of free videos here at Next Level Carpentry 😉😎 Work safely and enjoy! Best, Matt

@nickbrutanna9973

Жыл бұрын

I will point out Cutech makes helical jointers and planers that are priced in the US$600-800 range. They seem to get good reviews.

Great video Matt as I have a 6 inch Powermatic jointer and usually rip 8 inch boards to join. Very well done video which will save me a lot of time and money (not buying a larger jointer)!!

@NextLevelCarpentry

5 жыл бұрын

Not sure if you're out of the woods yet Michael... does your 6" Powermatic have the parallelogram adjustment mechanism? It's worth every penny... actually every $100 bill... extra that it costs. I'd sooner do with a 6" capacity WITH parallelogram than the 8" capacity without. I'm well aware I've just jeopardized a 'friend' by telling you this... sorry😬😁 Best, Matt

Great educational video. Thank you for taking the time to demonstrate how to accommodate a board wider than your joiner.

Outstanding video !!! Thank you, Bob

Thank you for this video!! I watched a different video that showed the same process ,but didn’t understand the process. Your video was very descriptive and I ‘got it’ after watching your video!!!

@NextLevelCarpentry

3 жыл бұрын

Thanks for letting me know Micah... I really try to convey processes clearly but it's easy to gloss over details important to viewers and not even realize it. Best, Matt

Thanks for another great tip. I knew there was a way to do that having read it sometime in the past, but could not remember the exact sequence. Now I know. Michael O’Brien Alabama, USA

@NextLevelCarpentry

5 жыл бұрын

Hey Michael... good to know this video refreshed your memory about a useful 'sequence'... I use this quite often and hope you find it helpful for projects you're doing too! Best, Matt

I never thought of turning on the planer and lowering it just until it catches the wood and pulls it through. Very good time saver.

@NextLevelCarpentry

4 жыл бұрын

Good eye... I think you'll find it much quicker and more accurate than trying to measure or use the planer's depth gauge. Once you get used to it you'll realize the time savings you mention. Best, Matt

You're the man. I have a mantel I'm building and the top is wider than my planer. Now I feel confident I can overcome my obstacle. Thanks for your time and ingenuity. God bless!

@NextLevelCarpentry

5 жыл бұрын

Happens all the time Mark. Approach this with forethought and follow the systematic process and you should do well. Blessings backatcha! Best, Matt

Very Very cool use of the jig....that's what I am going to use...I have a 8-inch PM jointer and a 20" PM Planer...making a 10 inch wide walnut plank table...thank you

@NextLevelCarpentry

4 жыл бұрын

Should work like a charm, Jack... good luck and work safely! Best, Matt

I’m one of the lucky ones that got a 6” planer, for $ 60.00 bucks at a yard sale! With new blades . Thanks 🙏 this was very help full! Ironworker Doug! Out.

@NextLevelCarpentry

3 жыл бұрын

Congrats, Doug... I first started using this back when I had a 6" jointer and think you'll be pleased/amazed at how simple it is to expand your jointer's capacity! Best, Matt

Thank you Matt, excellent video! I’m receiving my first jointer tomorrow and (was) concerned with its 6” capacity! Keep the tips coming Matt, you seriously are appreciate!

@mattjackson3996

2 жыл бұрын

You're most welcome... and FYI I used a 6" jointer for many years before upgrading to the 8" I have now. It was mostly for convenience rather than capability because there wasn't really anything I needed to do with a 6" that I couldn't, it's just that the 8" allows me to do it a bit faster and more efficiently. BTW I'd rather have a well-tuned and accurate 6" machine than an unreliable 8"... it's not what you got but how you use it that counts most😎 Enjoy that new toy... and work cautiously as you get to know it's capabilities and potential dangers? Best, Matt

Words don’t do justice to the knowledge you share on this channel! Every video is worth every second of time required watch it! Best investment on KZread!!

@NextLevelCarpentry

Жыл бұрын

Thanks for the glowing review Jon... I'll do my best to live up to it! Best, Matt

@jonrocket4106

Жыл бұрын

@@NextLevelCarpentry you always do!

Sweet idea , thanks for sharing this great idea

Great trick, thanks for sharing.

Awesome idea.... common sense.. I love your channel. Thanks for all the information.

@NextLevelCarpentry

5 жыл бұрын

Glad you like Next Level Carpentry Dwight... you're quite welcome and thanks for commenting! Best, Matt

Cant wait until you make a video about those run out stands you made! I keep getting hung up on my cheapo Harbor Freight rollers on my incredibly uneven driveway pushing a board through. Good stuff!

That is one sharp looking video thumbnail and nice work on the ad lib, Pro KZreadr and Master Carpenter!

@NextLevelCarpentry

6 жыл бұрын

Thanks for your comment here Mr Dan! Some day I'll introduce you to the creative guy who's responsible for that great new Next Level Carpentry graphics update. Spoiler: his initials are D.S. 😁😎 Best, Matt

Great Video! Thanks for the trick.

Very straightforward and helpful. Thanks!

Excellent idea!! You just turned my new 6" Jet Jointer into a 12" jointer!!

@NextLevelCarpentry

4 жыл бұрын

It's like magic, right Greg? Best, Matt

@b767greg

4 жыл бұрын

​@@NextLevelCarpentry Yes it is Matt! Thank you for sharing your knowledge with those of us who are weekend warriors!

Yup, this is Exactly what i needed!

Wow!! Thank you so much!! That is a brilliant work around. I only have a 6 inch jointer so this trick will be very useful as I have the same planer that you have.

@NextLevelCarpentry

4 жыл бұрын

I developed this process when I still had a 6" Delta machine Jerry... it will expand your capabilities considerably... have fun and work safely! Best, Matt

i literally ran into this issue with my new jointer and wasnt sure what to do. appreciate this tip!!

@NextLevelCarpentry

5 жыл бұрын

Shows you're pushing the limits of what you have to work with which, to me, is always a good sign. It's not what you got that counts but how you use it Bryan! Best, Matt

Great idea. Thanks!

Smart woodworker! Thank you sir!

This was a solid idea man, thanks for sharing

Excellent imparting of woodwork knowledge/experience, thank you. Where I am from, a lug is an insult. Going to grab a bottle from the top shelf some evening & take a shot every time you mention the aforementioned lug. 😆🍻 No power tools will be used. Respect.

Wow as a new woodworker want to be this was a huge help thank you so much for posting

@NextLevelCarpentry

4 жыл бұрын

Thanks Todd... hope you find other videos from Next Level Carpentry help you learn to work through other common woodworking challenges as you develop your skillset. There's a fair amount of content here for use and maintenance of a thickness planer that you might find interesting and/or helpful. Best, Matt

You and the Finish Carpentry TV are my go to guys for inspiration, good to see you both admiring one an other's work.

@NextLevelCarpentry

3 жыл бұрын

Richard's an amazing guy, Ted... you'll not go wrong follow his experiences and advise! Best, Matt

@tedfritsch3340

3 жыл бұрын

@@NextLevelCarpentry So true bud, but you're the one who lit the fire under this old guy to build one more home before the dirt nap. You and those box beams provided some answers on a home I think those would be a solution. Going to try my hand on it. Looking at the picture of this home, I think Box beams could be the solution of lower the cost from a Post and Beam look.

@NextLevelCarpentry

3 жыл бұрын

@@tedfritsch3340 you go, man!! Far better to wear out than to rust out, right?! 😎

Now that's a slick trick ,i got it, Thanks

Thanks for the info Easy Peasy can't wait to try it

@NextLevelCarpentry

6 жыл бұрын

You're welcome, Dennis. It's a little surprising how well this works for how simple it is. If you start with shorter pieces to get the hang of it you'll be amazed with what you can get away with on more gnarly stuff... Best, Matt

Brilliant. Much respect to you.

@NextLevelCarpentry

5 жыл бұрын

Thanks Mike... I appreciate you watching, commenting... and respecting... I'll try not to disappoint! Best, Matt

Great video/videos! You make it look so easy using Plain (excuse the pun) sense - followed by the application. -Just spent an hour viewing your other videos...Looking forward to watching and learning from the rest! Job well done!..ken

@NextLevelCarpentry

4 жыл бұрын

Thanks Ken... much appreciated. Hope you'll subscribe if you've not already? Plenty more to come.... Best, Matt

Great tip. Thanks for sharing.

A few genius ideas that will certainly save me a lot of cash. Thanks

Fantastic. Thanks.

Thank you. Very useful.

Great jig to get the job done!

Great information. Thanks.

Another great tip! Thank you

Brilliant! Thank you.

Platen Pending. Thumbs up earned sir.

Excellent video and technique! Another method is to joint all the boards to the capacity of your jointer and glue them together to the width of your planer. Rinse and repeat and there is no limit to the width of your panel. Maybe not as accurate but you’ll get there in the end.

Great stuff

I appreciate this advice, I've been really avoiding buying a planer and jointer because the size of a jointer is expensive.

@NextLevelCarpentry

5 жыл бұрын

Buy as much jointer width as you can justify and afford, James... this will definitely help out but the more you start with, the more you can do. BTW I started out with a 4" width Delta and, with sufficient determination, was able to do some pretty impressive projects. That said I'm not going to give up the 8" Powermatic without a fight! 😀😎 Best, Matt

@68HC060

5 жыл бұрын

Fortunately, today, you can get a 10 inch jointer/planer combo for around $550. In Europe, it's called Scheppach HMS1070; it's a re-branded chinese brand (probably "Wen"). If you're on a much tighter budget, you can search KZread on how to make a jointer out of a hand-held power planer. If you're choosing between a jointer and a planer, I think choosing the planer will be the best choice, especially because you can use it this way: kzread.info/dash/bejne/eWyjlrJmkbCehag.html (or similar, because you can make improved variants)

@davidhawley1132

4 жыл бұрын

68HC060 With next to no budget, I took a used hand power plane and built a frame and extension shoe. It gets the job done. I haven’t gotten around to building a guard for it, so I am very very careful around it.

THAK YOU MISTER! you have taught me new trick today well done Cheers!

@NextLevelCarpentry

6 жыл бұрын

You're welcome, Zvoinimir, hope this new trick helps out on projects you're working on! Best, Matt

No need for the patent… my grandfather invented the cocktail umbrella and the Swivel Straw. This was an informative video and will help with my Jet 42” jointer and Dewalt 735X. Thanks for the time.

Thank you this was very helpful!

@NextLevelCarpentry

5 жыл бұрын

Brikeibur, glad to hear it! Best, Matt

Thanks for the tip. Very useful info.

@NextLevelCarpentry

5 жыл бұрын

Hope you get to put this to use ESOT... Best, Matt

That is fantastic! Thankyou!

Awesome tip! Thanks!

Helpful. Thank you.

As I thought another problem solved! Thanks my friend.

@NextLevelCarpentry

6 жыл бұрын

For sure, Billey, glad to help. Sorry if I'm bringing up problems you didn't even know you had to solve though 🤔, no one needs that kind of stress in their life 😁 Best, Matt

@billeybop

6 жыл бұрын

I appreciate your problem solving ability!

smart old guy. thanks for that!

@NextLevelCarpentry

5 жыл бұрын

You're welcome... for the 'smart' part, Andres. For the 'old guy' part? Not so much. 😲😏😁😎

Great Tip. Thank you so much

@NextLevelCarpentry

5 жыл бұрын

You betcha, Bryan! Best, Matt

Gracias, y muy bien explicado.

Thank you for sharing....

You are a clever man. Thanks

Hey again to Matt. In another video you said you had 4" then 6" before getting this 8" jointer. Question: how long did you use each before stepping up to the next size? Thanks for all these great videos. Any chance you'll talk about using LVL-type framing and I-beam-type joists? Hoping you'll show how to make your own ... or may be it's better to just go to the lumber yard. Blessings of Lord Jesus upon you and yours.

I love the caution sign on the jointer.

Brilliant!!!

@NextLevelCarpentry

4 жыл бұрын

Thanks! Best, Matt

*Sees MDF board* Slaps head. Why didn't I figure that out sooner? I rhought there was some way to widen the jointer, but then realized that it wouldn't work when I saw the jointer blade. So basically wider planer > wider jointer. in importance. Brilliant!

Great tip!

Hello there, I think your vids are great thank you for your skills sharing. I have a question. I’m looking for suggestions on how to glue up 1x1 strips to make a square, though I’m thinking of gluing them at diff lengths to stager and eventually obtain lengths of 30-40 inches. Would you have suggestions on how and possibly what kind of glue to be flexible to maintain the wood glued due to bending or pressure..?

Very smart. Thanks

@NextLevelCarpentry

5 жыл бұрын

Works like a charm Brandt... you're welcome. Best, Matt

very good video

Love it. Thank you sir.

@NextLevelCarpentry

2 жыл бұрын

You're sure welcome Ron... this method is a secret weapon that allows me to be productive and profitable in a small shop. Hope you're able to use it for similar benefit😎

You are the best.

@NextLevelCarpentry

6 жыл бұрын

I try, Konstantin but guarantee there's times neither myself or others think so 🙄😎 Best, Matt

Another great tip.

@NextLevelCarpentry

6 жыл бұрын

Thanks Gerald! This method allows me to do projects that I'd otherwise have to turn down since I can't really justify the cost and real estate necessary for a 13" wide jointer 😁 Best, Matt

Great video, very interesting

@NextLevelCarpentry

5 жыл бұрын

Thanks TopSaw! Best, Matt

Nicely explained. I been using the platen trick for years. Maybe we're related. Lol. The other trick I use for real wide stuff is with using a sled, some shims and hot glue, and feed the whole mess through the planer. It works great too.

@NextLevelCarpentry

6 жыл бұрын

Thanks for commenting, Hardnox, we must both be alums of The School of Hardnox! The 'other trick' you mention is definitely effective when and where this method falls short. I like to use a slab of LVL lumber for the sled you mention but will adopt the hot glue idea you've added... never thought of that! I end up using screws and small nails for the shims which never goes all that well. Best, Matt

@hardnox6655

6 жыл бұрын

Lol. Apparently. A hunk of LVL is a great idea. Mine is two pieces of 3/4" MDF which is waxed. The shims pop right off with the wax.

@NextLevelCarpentry

6 жыл бұрын

How long and wide is your MDF sled? I really like the idea but am curious if it's stiff enough at 6' or 8' in length. Can't beat the smooth waxed surface for shims and hot melt though! Thanks for adding this to the discussion, Hardnox, I appreciate it and bet other viewers will too... Best, Matt

@hardnox6655

6 жыл бұрын

Thanks. My pleasure. These forums are wonderful for sharing information, and as it should be. I have 3 sleds made from one sheet of 3/4" MDF. I have 2 planers (12" & 24") My sleds are 11-7/8" wide by 3', 5', and 8' lengths and they remain flat and straight after many years. All are double ply (1-1/2"). I have no issue with 24" workpieces. I also use the sleds with my 19-38 Shopmaster drum sander using 40 grit paper when I'm in a hurry and have dull planer blades (and don't feel like changing/sharpening them). As you know I make heirloom furniture often using slabs. Often, I run a wide slab on my jointer, multiple times until flat, then attach it to the sled and run it through the sander or jointer. Heck, whatever works is my motto. WestphaliaWoodWorks.com Best regards, Peter

@NextLevelCarpentry

6 жыл бұрын

I'm with you on the 'whatever works' motto, Peter. I feel hypocritical sometimes doing a video demonstrating a technique of some sort and then going out to the shop and doing a similar process a different way because it's the the best method at the moment. From your sled inventory I can tell you have to manage a wide range of variables and getting too committed to any one method hobbles production. Best, Matt

Kind of off topic, but I just wanted to let you know what a great company Delta is. Our home was destroyed by an F-4 tornado in Southern Maryland 18 1/2 years ago. It was picked up in one piece and moved about 9 ft. When it came down, one corner of the house landed on my Delta Contractor saw. I sent pictures to Delta, and they called to tell me they were giving me a new table saw! I explained to them that I had already bought a new table saw, so they asked me if I needed anything else. I told them I had been thinking about an 8in. jointer. They sent me a brand new 8in. DJ-20, $1,650, to my temporary house, completely free of charge with no shipping!!! To say I was overwhelmed is an understatement!! They have a news letter and they told everyone what happened, and they titled the story "Delta Saves Lives" I use my beloved jointer every day and absolutely love it! Think about this story when you buy your next piece of equipment. By the way, I have been using your method of jointing wider boards for years, and it works flawlessly!

Brilliant & thank you 👍👍👍

@NextLevelCarpentry

6 жыл бұрын

I'll take a 'brilliant' any time one is offered... thank YOU 😁😎👍 Best, Matt

Ingenious! Thanks for sharing.

@NextLevelCarpentry

6 жыл бұрын

Thanks for sayin' TI... appreciate the comment and you're welcome for the share! Best, Matt Hope you're gettin' some miles on that shiny red Indian these days... BTW I live 20 miles from Sturgis SD where the 78th annual Rally is about to get under way... Best, Matt

@twistedducati6895

6 жыл бұрын

Oh yeah, I'm definitely putting in the miles on it. Taking a trip up NE with some friends in a few weeks. I'll have to get out to Sturgis one day for sure.

@NextLevelCarpentry

6 жыл бұрын

Good to hear that bike's not just a poser... a summer road trip sounds great... ride safe and enjoy! Sturgis or bust... some day 😁😎

Very simple and efficient method. Great video. (BTW, at one point in my career, I did actually own a 24" Oliver jointer! When I got tired, I could take a nap on top of it. When I moved and couldn't fit it into the next shop, the good-bye was tearful...)

@NextLevelCarpentry

5 жыл бұрын

Thanks for your comment and opinion... I can imagine the tears when being separated from a fine old Oliver machine... I feel your pain, brother! 'take a nap on top of it' LOL! Hope your ability to comment means you've made it through the weighty life events you mentioned last time we 'talked' and are back up and about? Best, Matt

Love your vids

@NextLevelCarpentry

6 жыл бұрын

Thanks for sayin', Chris! I appreciate the comment... Best, Matt

Geez. That's clever. Thank you. Hope so you deal with snipe? I had the same planer and regularly had snipe (lol at platen pending!)

Acumen - a power to see what is not evident to the average mind. There you have it sir!

@NextLevelCarpentry

5 жыл бұрын

I'll try to live up to your compliment Jack... thank you! Best, Matt

Excellent tip! Using the platen is much easier and quicker than double-side taping a spacer. I will never understand why people would hit the thumbs down button on a video like this. Simple, to the point and great information. Thank you!

This is a great idea. One thing that is not obvious in your video is the pressure you put on the board when going through the jointer. It should be just enough to let the cutters work but not so much that you flex the board. If you push too hard you are replicating what a planer does.

@NextLevelCarpentry

5 жыл бұрын

That's right Richard... I hope that your clarification helps other viewers get the same results I do by avoiding the use of too much pressure while feeding the board through. Best, Matt

@PatonMacD

5 жыл бұрын

If I am right, there should be more of an effort or pressure on fence to keep a 90 (at least when on edge) than on cutterhead. I normally put maybe 20% pressure down and 30% pressure against fence and the other 50% is praying that I am feeding the stock in the right way and avoiding tearout LOL

@francismccabe3265

5 жыл бұрын

For jointing, keep enough pressure against fence to keep board in contact, but not so much as to flex the board. Above might work for facing if the board is quite thick and the edge has been jointed. Mostly I try to rock the board on the jointer table a bit to find the high spots (if board is bowed up or twisted). Put the most pressure on the forward high spot and maintain the pressure all the way onto and along the outfield table. If bowed side is down, put pressure in middle of board. @@PatonMacD

@NextLevelCarpentry

5 жыл бұрын

@@francismccabe3265 Pretty good narrative here... thanks! Best, Matt