SUPER Tiny ELRS Lite Receiver! | BetaFPV ELRS Lite Flat Antenna V1.1 Receiver Review

Ғылым және технология

Checking out some BetaFPV ExpressLRS products including a super tiny lite receiver with a built-in antenna. The ELRS ecosystem continues to impress with all these offerings!
=========================
Items suggested in this video
=========================
My Favorite Screwdrivers (Wiha Slotted & Phillips):
Amazon US: amzn.to/3tq15Eu
Amazon Canada: amzn.to/3E1Ph02
DJI Goggles 2 Integra:
Amazon US: amzn.to/40DmrND
Amazon Canada: amzn.to/3Kdzd0y
GetFPV: bit.ly/40IFvux
DJI Goggles 2:
GetFPV: bit.ly/41M3AkY
DJI O3 Air Unit:
Amazon US: amzn.to/3WZnupK
Amazon Canada: amzn.to/3jJszUR
GetFPV: bit.ly/3ioEE1s
TBS Tango 2 Pro:
GetFPV: bit.ly/3QsPlgj
Caddx Nebula Pro Nano Vista Kit
GetFPV: bit.ly/3vNwOBx
============================
Videos you may want to check out
============================
TBS Tango 2 Pro INTERNAL ExpressLRS | How to guide on stuffing an ELRS module INSIDE the transmitter:
• TBS Tango 2 Pro INTERN...
Is The Lightest ELRS RX Going to FAILSAFE? Checking Out The Happymodel EP2 TCXO ExpressLRS Receiver!
• Is The Lightest ELRS R...
============================
Links
============================
ExpressLRS Configurator:
github.com/ExpressLRS/Express...
ELRS Lite Receiver:
betafpv.com/collections/rx-tx...
#elrs #fpv #drones
Mandatory Disclaimer: I participant in the Amazon Services LLC Associates Program, which is an affiliate advertising program designed to provide a means to earn fees by linking to Amazon.com and affiliated sites. Item suggestion links above are affiliate links and I will receive compensation if you choose to use them. There is no cost to you to use these links and any compensation received goes right back into the channel.

Пікірлер: 18

  • @Mangorille
    @Mangorille9 ай бұрын

    Hey Folks! Checking out another super tiny and light ELRS receiver. Make sure to check out the Happymodel EP2 review video in the description. Stay tuned for the Tango 2 RF module update video as well.

  • @JDDupuy
    @JDDupuy9 ай бұрын

    Nice build. Going to order that frame. Loving the 3.5 frames that I have now.

  • @Mangorille

    @Mangorille

    9 ай бұрын

    Thanks buddy! The Quadmula is my go-to frame now, really happy with the ease of use and quality. Would be awesome if they'd do a 3.5 or 4" conversion kit.

  • @TechnicallyTom
    @TechnicallyTom9 ай бұрын

    When using dynamic power, just because it jumps up to full power doesn’t necessarily mean you needed full power. This can happen if the signal degrades quickly enough to require a a couple jumps up in power. The transmitter will jump to the high setting so it doesn’t take too long to find what it needs to prevent failsafe. The telemetry link going down would also cause this to happen since the transmitter would no longer be able to see the signal quality. Telemetry has a lower max power compared to the control signal.

  • @Mangorille

    @Mangorille

    9 ай бұрын

    Thanks for the note, I never lost telemetry during the flight. The Tango 2 Pro has an audible warning when telemetry is lost. I do agree with you point that it will ramp up quickly to prevent a failsafe. I found it strange that even when it was at ~-103dbm, the transmit power was still at 10mw. I'd think at that point it would ramp up but I suppose it looks at a combination of "things" to make that determination.

  • @catbroh
    @catbroh9 ай бұрын

    I have one of these sandwiched in my 3.5 in frame and it goes 1/4 mile no problem, amazing.

  • @Mangorille

    @Mangorille

    9 ай бұрын

    So that's about 400m, still within the 600m advertised on their website. What power output do you use on your transmitter?

  • @catbroh

    @catbroh

    9 ай бұрын

    @@Mangorille I use auto power up to 1W. I do get telemetry lost - telemetry recovered warnings around 200m, but the link is rock solid. I bet if I moved it to the underside of the quad it would be even better.

  • @Mangorille

    @Mangorille

    9 ай бұрын

    @@catbroh Got it. my module only goes up to 500mw but I suspect it would go 300-400m easily at 500mw.

  • @LovesM855A1
    @LovesM855A19 ай бұрын

    Sweeeeeeeeet!!

  • @Mangorille

    @Mangorille

    9 ай бұрын

    Thanks! Happy flying!

  • @citytouchstudios1144
    @citytouchstudios11449 ай бұрын

    Used the internal elrs on my Pavo pico and it was grwat

  • @Mangorille

    @Mangorille

    9 ай бұрын

    How far did you fly it? It should perform similar to what you saw in this video, which is usually good enough for smaller quads that you don’t fly more than a couple of hundred meters away from yourself.

  • @citytouchstudios1144

    @citytouchstudios1144

    9 ай бұрын

    I don’t know how far exactly but my latest video one take you can see it def rocks pavo pico v2 gorgeous whoop….

  • @cameronsays
    @cameronsays6 күн бұрын

    Sitting atop that metal heatsink doesn't seem the best place for this module.

  • @Mangorille

    @Mangorille

    2 күн бұрын

    Agree. Problem is that there really isn’t anywhere else that’s well protected during crashes.

  • @lemonsquareFPV
    @lemonsquareFPV9 ай бұрын

    I replace the built-in antennas with a simple piece of wire (usually enamelled motor wire, but anything works), around 31mm and get much better performance. You are basically making a simple monopole antenna this way. I really don’t like the onboard antennas.

  • @Mangorille

    @Mangorille

    9 ай бұрын

    I've heard of folks doing this on whoops and I've seen even some come with a piece of stiff wire. For a 3"+, I'd think you'd still get better range going with a normal antenna that has a bit of give to it in crashes.

Келесі