For number 2 use a few toothpicks and a bit of wood glue or even simple white glue.

@kerrischneider7693

5 ай бұрын

I agree...toothpicks are a zillion time faster n easier than all those steps!

@creationholic101

5 ай бұрын

Hello! thanks for your recommendation. Wish you all the best!

@giulioluzzardi7632

5 ай бұрын

Saw-dust mixed with woodglue using a dowel or toothpick. Keep your saw dust and wood-chips for these repairs.

@johnslugger

5 ай бұрын

*I use UV cure glue and clear food wrap and stuff it in the hole. Light it up with UV flashlight for 5 seconds and its ready for screws.*

Thank you for all these exemples. With these knowledge i can make a lot of repairing

@creationholic101

5 ай бұрын

Glad it was helpful!

Great hacks except for #4 which is downright dangerous.

@creationholic101

6 ай бұрын

Hello! thanks for your comment. Wish you all the best!

@pepperdude

6 ай бұрын

You mean you don't do electrical work on stuff that's plugged into an active source? What could possibly go wrong? 😅

@gopalakrishnanms

6 ай бұрын

The voltage and current at the LED terminals won't possibly harm you as they are downsized by the circuitry. Of course, any electric work is inherently dangerous and a warning was appropriate.

@sajjadahmadvoc9388

6 ай бұрын

I like this no. 4th to try

@mikejosef2470

5 ай бұрын

​@@gopalakrishnanmsYou willing to bet your life on that? First, they're wired in series.10 LEDs equals about 35V. The current is enough to kill you... takes hardly any. More to the point, we don't know why the unit failed. Maybe the voltage is too high. Lastly, as I said, they're wired in series. The foil bridge has little resistance, which means the voltage for 10 is now divided between 9 LEDs. They'll run hotter. If they cause a fire and that modification is discovered, your insurance claim will be refused. You could kill yourself or worse, someone else.

You forgot to mention that the LEDs inside the lamp is at HIGH mains voltage (depending on lamp design) since there uis no galvanic isolation and pose a SERIOUS risk should you inadvertantly touch any of the components on the PCB. Do not try this at home!

@devenyi73

5 ай бұрын

And as the resistance is lower now, all the other led's will went wrong quickly.

@creationholic101

5 ай бұрын

Hello! thanks for your comment. Wish you all the best!

Thank you, very useful tips with things at home. Great when you're in a hurry or for an even elderly woman on their own .

@creationholic101

4 ай бұрын

Hello! I am very happy to read your comment. Have a good day!

It was very informative and useful, thank you dear ❤

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

Thank you, my friend, and I wish you good luck and success

@creationholic101

6 ай бұрын

Thank you too

Thank you much solutions

@creationholic101

10 күн бұрын

Happy to help

Thank you Creativeholic for this handy video. Thank you to the Community Members who also provided useful information as well. Best Wishes to all of you!

@creationholic101

5 ай бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Since you had a soldering iron as in #6, why didn't you just use that to fix that LED bulb? A single drop of solder bridging the pads for that bad LED is all it would need. However gluing a piece of foil over them will result in a poor mechanical connection when the board heats up, and possibly even a high-resistance connection that will heat up and possibly start a fire. Use the right tools and methods for the job.

@creationholic101

Ай бұрын

I want to give more measures to people who don't have a soldering iron

Your ingenuity is purposeful and boundless!!! Keep it up!!! Genius and waste not want not are always appreciated!!! Robert W Goodwin MD aka Db

@creationholic101

24 күн бұрын

Thanks so much for watching our video. Wish you all the best

Hola. Saludos desde Medellín-colombia. Muy interesante los videos. Se aprenden muchos trucos.

@creationholic101

5 ай бұрын

Glad it helped!

Excellent examples and demonstrations. Very usefull thank you

@creationholic101

6 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

De Valladolid, España Adelante. Os vemos con gusto.

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

شكرا لك على هذا الفيديو المفيد انا من الجزائر

@creationholic101

5 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

This guy can fix any thing, wow🎉

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

@davidsanders6957

5 ай бұрын

MacGyver

いいもの観ちゃった！ ありがとう！

@creationholic101

5 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Do not solely rely on the switch before starting to remove the LED. Most of the switches cut the current on one line, therefore if you connect the switched line to Neutral (you have 50% of chance) then the live line will not be interrupted and you may get a shock when you touch the burned LED (depending on the position of the LED on the LED string, especially if it's close to the high voltage side) with a conductive tool. Totally unplugging the system from the mains is the best choice.

@creationholic101

3 ай бұрын

Hello! thanks for your comment. Wish you all the best!

Using staples is a great idea!

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

On #2, you could have just stuck toothpicks in the original holes and screwed everything back in place. The screws create new threads in the toothpick as you screw it down. Much easier than what was shown here.

@creationholic101

24 күн бұрын

Hello! thanks for your recommendation. Wish you all the best!

This is someone who loves AU foil!

@Mulletmanalive

19 күн бұрын

I think anyone would love gold foil. Alum8nium is Al.

Good time, teacher, your works are really beautiful 💖🤌👍🌹 and unique 💖💖

@creationholic101

16 күн бұрын

Thank you! Cheers!

Better way to do #2, just fill the existing hole with superglue, let it sit overnight & screw the hinge back in place. The fiberboard will absorb some of the superglue, the rest will harden in place, and you'll have a small dimple in the center where the screw goes. For hardwood doors, use superglue or wood glue and a toothpick or small diameter dowel.

@creationholic101

5 ай бұрын

Hello! thanks for your comment. Wish you all the best!

@brettINsanfracisco

5 ай бұрын

wood glue + sawdust 👍 = best

@78tag

5 ай бұрын

"use superglue or wood glue and a toothpick or small diameter dowel" .....and go the added effort of centering the holes. That hinge isn't going to re-install properly.

@mariolarenas-negrete9263

5 ай бұрын

Thanks you😊

@sceptic2061

4 ай бұрын

#2 was crooked due to poor alignment. I would rather follow your advise, than videos as holes are not enlarged and easier to aim at

Gary from Oklahoma USA Thumbs Up!

@creationholic101

Ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

If the switch at 3:00 min is SPST, you should be at danger... It should be DPST switch. Or you have to disconnect the plug from the main socket.

@creationholic101

22 күн бұрын

Hello! thanks for your comment. Wish you all the best!

Excelente canal me encantan los trucos caseros

@creationholic101

5 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

You are amazing man! We look forward to teaching you new tricks. Sincerely yours from Iran

@creationholic101

2 ай бұрын

Thank you! Cheers!

Also great for cleaning bbq grill, reflecting/directing wifi signal, and emergency auto fuses (good excuse to always have gum in your car.

@creationholic101

Ай бұрын

That's a great idea!

That LED isn't going to last without the proper ohms

@creationholic101

Ай бұрын

Hello! thanks for your comment. Wish you all the best!

If you wish to clean Silver Jewlery or Silver plated utensils, put Aluminium foil in a basin, pour in hot water that has Sodium Bicarbonate dissolved in it & then put the Silver objects in so they touch the Aluminium. Wow! they clean immediately as they touch the foil.

@Notron-ku6dt

9 күн бұрын

Cleaning silver, gold, with Toothbrush and toothpaste. Top 👍👍

I see... the aluminum foil with the super glue helps you put your hinge on crooked. Nice!

@creationholic101

4 ай бұрын

Thanks so much for watching our video. Wish you all the best

I have benefited a lot from these videos, thank you

@creationholic101

Ай бұрын

Glad it helped!

That sounds interesting! What's the purpose of pouring glue on aluminum foil? Is it to create a new super adhesive or just to test the glue's features?

@creationholic101

6 ай бұрын

Pour glue on the aluminum foil to create a bond and make it more sturdy

@franchico2franchico298

6 ай бұрын

Un led menos recarga los otros. Pronto se quemara la bombilla.

@maricarmenjordantorrent7575

6 ай бұрын

Pues yo he arreglado varias hace meses y siguen funcionando.

@mikejosef2470

5 ай бұрын

​@@maricarmenjordantorrent7575I'll bet they haven't caused a fire either... yet. LEDs are meant to last a very long time, so there's a good chance there's a fault in the circuitry, then you add 10% more voltage to each led. If they cause a fire and the modification is discovered, your insurance claim will be refused.

@jamessouza7065

5 ай бұрын

Most of them get refused anyways these days the thieving tapeworm son's of bitches!

Hello!! thanks!! From Seville, Spain

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Desde España. Muy buenos trucos. Muy útiles. 😊

@creationholic101

4 ай бұрын

Glad you like them!

çok güzel videoların var. Teşekkür ederim.

@creationholic101

6 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Thanx for your great tips.

@creationholic101

22 күн бұрын

Glad you like them!

You did not just risked yourself and taught kids to risk themselves getting electrocuted to smithereens to save $2 bucks ? Dude.

@creationholic101

6 ай бұрын

I think it's quite simple

@mikejosef2470

5 ай бұрын

Yeah it's simple... you disconnect the power before doing any work on mains powered equipment.

Some interesting ideas. I’m not sure I’d take the time to deal with an LED bulb like that though. It was still a “shaky” lightbulb. That would drive me crazy.

@creationholic101

6 ай бұрын

I understand your concern! Make sure you have safety equipment in place before doing so

@giuseppemartorano1413

6 ай бұрын

​@@creationholic101😊😊😊😊😊 il 😂😅 mi 7😊😅 hu 😅 hu tu 😊 .y numuku Lloyd's KK o se la ok look 9!😊😊😊

@giuseppemartorano1413

6 ай бұрын

Ma oggi nn 😅🎉😅😅😅u. G Y😅😅 MM😢o II.

@giuseppemartorano1413

6 ай бұрын

​@@creationholic101😅😅😅😅😅😅😮 fammi II pollo pollo solo se nn Buon 😮 Lo lum in😊😊un u in

@Michaelbor911

5 ай бұрын

Its only by camera rekord, not visible blinking for eye

Thanks, thats 6 mins I'll never get back.

@creationholic101

6 күн бұрын

Thank you! Cheers!

These diys are what keep me up late at night. I also 'travel' a lot, lol

@creationholic101

6 ай бұрын

Glad you like them!

@fraserkaye4470

4 ай бұрын

Hmm, I know what you mean man

thank you for sharing this video to view it is very clever ideas I wish this channel more success

@creationholic101

6 ай бұрын

Thank you so much!

Sei un genio ora so qualcosa che prima non sapevo👍💯🤗

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!

Thanks for the tip

@creationholic101

Ай бұрын

Thank you! Cheers!

Xalapa Ver. México, tu canal es muy bueno. Gracias por compartir tantos tips. Feliz año nuevo.

@creationholic101

4 ай бұрын

Thank you, wish you a happy and joyful new year

شكرا هذه الافكار.

@creationholic101

6 ай бұрын

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

素晴らしいアイデアです👏👏👏👏👏

@creationholic101

4 ай бұрын

Thank you! Cheers!

I roll up aluminum foil into a ball to clean the grates in my charcoal grill. Works great.

@creationholic101

5 ай бұрын

Great tip!

Rio de Janeiro! Brazil

@creationholic101

5 күн бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

بنده از ایران بیننده برنامه‌های آموزنده شما هستم بسیار عالی و آموزنده

@creationholic101

5 ай бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Bonjour de France, et merci!

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Ik kom uit Nederland en kijk graag je filmpjes.

@creationholic101

4 ай бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

I like that LED light cheat❤❤

@creationholic101

5 ай бұрын

Thanks so much for watching our video. Wish you all the best

Japan😊❤❤❤

@creationholic101

4 күн бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Good tips👍 Greetings from Venice Italy

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

İ am from TURKEY

@creationholic101

15 күн бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

I'm from Iran❤❤❤❤❤❤❤❤❤❤❤❤❤

@creationholic101

15 күн бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Way cool stuff!! Thanks!

@creationholic101

24 күн бұрын

Glad you liked it!

Molto interessanti le idee che ci hai consigliato e possono ottenere!. risparmiando, riuscendo, aggiustando, con il fai da te: con le nostre mani dà molte soddisfazioni gratificazioni!. Io sono dell'Italia centrale🇮🇹 sul Mar Adriatico Buon lavoro idee, ai prossimi video Buone Sante Festività!.

@creationholic101

5 ай бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Nice ❤❤❤

@creationholic101

Ай бұрын

Many many thanks

Thanks for your ideas. It is very useful for me. I'm from Ukraine.

@creationholic101

4 ай бұрын

Glad it was helpful!

To the first “tip” - steel wool would do the same job cheaper…😉

@creationholic101

5 ай бұрын

Hello! thanks for your recommendation. Wish you all the best!

Thanks! Brazil!

@creationholic101

3 ай бұрын

Thank you! Cheers!

Muy buenos tips

@creationholic101

4 ай бұрын

Glad you like them!

I clean my aluminum foil with aluminum foil so I can reuse it. When the aluminum foil i use to clean the other aluminum foil gets dirty i take another piece of aluminum foil & use it to clean the aluminum foil that i use to clean the aluminum foil so i can use it again.😊

@creationholic101

5 ай бұрын

That's such a great idea

I'd use a wooden dowel or wood shavings & wood glue let dry then screw the hinge in for number 2. The led light trembling and flickering like that is not something I care to have in the house, it would make me batty. Cool other wise, thanks

@creationholic101

5 ай бұрын

Thank you for sharing your feedback. Have a good day!

From india

@creationholic101

2 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

I use aluminium foil to clean the aluminium engine casings with aluminium cleaner

@creationholic101

5 ай бұрын

That's a good idea!

Fantástico, muito bom.

@creationholic101

4 ай бұрын

Thank you! Cheers!

"Wow, this video blew my mind! Using aluminum foil and super glue to fix various items is such a genius idea. I never thought these everyday materials could be so versatile. Can't wait to try out these hacks myself!"

@creationholic101

Ай бұрын

Thank you! Cheers!

USA ,Michigan

@creationholic101

24 күн бұрын

Thank you for watching

A fan!!! USA, HAWAII!!! Db

@creationholic101

24 күн бұрын

Thank you for watching

Hello from Switzerland greetings😊

@creationholic101

4 ай бұрын

Thanks for coming

That loose illumination LED didn't necessarily need to be removed. A quick dab on either side with a drop of new solder would have gave it new life, if it was loose due to insufficient solder.

@creationholic101

24 күн бұрын

Thank you! Cheers!

❤sizin bilgilerden çok yararlanıyorum bazı bilgilerden bende çkk büyük fikirler çoğalıyor umut ediyorumki bu bilgi çeşitliluğinden daha fazla atılımlar göstereceğim başarılarınız daim olsun eğitimsisteminiz güzeliklerle dolsun saygılarımla

@creationholic101

3 ай бұрын

Glad it helped!

@cherylroberts1839

24 күн бұрын

"May your education system be filled with beauties" I hope that's Google's misinterpretation and not what you actually said?

Ciao, ho guardato il tuo video dalla Romagna Italia, grazie per avere mostrato come risolvere alcuni problemi.

@creationholic101

6 күн бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Quebec,Canada

@creationholic101

Ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Boas dicas, vlw! Mas no primeiro caso, dos parafusos na madeira, dá menos trabalho e tbm fica bem preso, encher o buraco com palitos de dente ou de fósforo, e voltar com os parafusos originais...

@creationholic101

5 ай бұрын

Hello! thanks for your recommendation. Wish you all the best!

Those ideas with aluminum are not bad

@creationholic101

3 ай бұрын

Thank you! Cheers!

Good idea

@creationholic101

6 ай бұрын

Many many thanks

A simple blob of solder across the LED terminals is so much easier and permanent.

@creationholic101

Ай бұрын

Hello! thanks for your comment. Wish you all the best!

👏👏👏👍ABRAÇOS E DEUS ABENÇOE, MAGÉ RJ

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

I from Iran❤

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

3:14 the failed LED already had a dot on it. 😁

@creationholic101

Ай бұрын

Please try and feel

great video!

@creationholic101

5 ай бұрын

Thanks for the visit

Cool ❤😮

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

hi from south Carolina usa

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Im afgan its very good

@creationholic101

5 ай бұрын

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

Helo .sài gòn. Vietnam

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

I didn't realize there were subtitles. I only get them with Closed Captioning on. They add to the video.

@creationholic101

18 күн бұрын

Thank you! Cheers!

LIKE if you wanted him to put superglue in the silver chain (bracelet) too!

That fourth one is a good way to risk arcing. Bridging it out with solder, or preferably a resistor would be safer. The sixth doesn’t really count. Man, the number of ways you’ve come up with to fix that cupboard door…

@creationholic101

6 күн бұрын

Thank you for sharing your feedback. Have a good day!

From Greece

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

درود بر شما عالی بود از کشور ایران استان اذربایجانشرقی شهر تبریز

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Salut je suis français. Je voudrais savoir si t'as certaines marques de colle à nous proposer puisque je n'y connais rien en colles et leur composition doivent varier autant que leur prix je supposes ? Cela dit tes expériences sont vraiment le top du top de l'ingéniosité donc je viens de m'abonner bien sur😃

@creationholic101

2 ай бұрын

Ingredients of "cyanoacrylate adhesive glue"

@louelastic4601

2 ай бұрын

​@@creationholic101 Ok merci je vais chercher ce type de produit. et tester ça.

Ide yang keren

@creationholic101

5 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

@serviceacjambi17_

5 ай бұрын

@@creationholic101 ☕️

Your follower from Iraq

@creationholic101

4 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

سلام از ایده‌های شما استفاده می‌کنم و بسیار علاقه‌مندم من این روش را تجربه کردم و عمر لامپ‌ بعد از تعمیر کمتر از ۷ روز مجدد می‌سوزه،ولی این روش برای لامپ‌های بالاتر از ۲۰ وات بسیار مفید و عمر لامپ طولانی‌تر است. موفق باشید💐

@creationholic101

5 ай бұрын

Thank you for sharing your feedback. You can weld it for longer life

Increible 😅

@creationholic101

4 ай бұрын

Thanks so much for watching our video. Wish you all the best

Why did you choose to use foil in number 2 over the normal suspects like Baking soda or styrofoam or charcoal or cement or cotton