Mix Sand And Super Glue. You Will Be Amazed With The Results
Тәжірибелік нұсқаулар және стиль
Hello everyone! You are watching video "Mix Sand And Super Glue. You Will Be Amazed With The Results"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creationholic
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diyprojects #tipsandtricks #diy #plastic #tips #welding #superglue #sand
Пікірлер: 810
Great ideas from easy-to-find materials to fix broken areas
@creationholic101
2 ай бұрын
I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates
@user-lw6cu6tz8i
2 ай бұрын
@@creationholic101 ответ можно написать по-русски!?
Te felicito compañero ..Tienes gusto por lo que haces ,no lo llamo trabajo por qué lo haces con mucha pasión .El que sabe goza y el que no destroza .Un saludo desde Tenerife
@creationholic101
2 ай бұрын
Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!
@ivorytabs
2 ай бұрын
habla english
For stripped out screw holes in wood, fine saw dust works better than sand, and won't dull up your drill bit.
@creationholic101
2 ай бұрын
Thanks for sharing!
@sharazar
2 ай бұрын
exactly what I was thinking
@j3errym
2 ай бұрын
Cotton wool + superglue
@christosvolikakis1523
2 ай бұрын
I’ve always used sawdust and plain wood glue. In the field, one we had stripped nuts or bolts, and an emergency, will you pick up a little coarse sand from the job site and put them on the threads to make temporary Loctite
@j3errym
2 ай бұрын
@@christosvolikakis1523 as a development enginerr we had access to tubes of "liquid metal" some sort of superglue alloy mix, even used to patch holes in engine blocks and various brackets. Not widely available in retail,lol.
Super-Glue or Cyano-Acrylate, can be bought from Zap-A-Gap, and comes in thick gel, medium regular, or Ultra-Thin (best), they have a "double cap" to prevent hardening in the bottle. . . cyano mixed with any aggregate (sand or steel wool) works with time to evaporate, but works faster when damp, not dripping wet. . .When mixed with cellulose (cigarette ash, fine sawdust, baking powder) you get a fast chemical reaction generating heat that will semi melt plastic. My favorite micro-plastic welding trick is to drip a puddle on target, and use slivers of styrofoam egg container as like a mini welding rod. You can pick your colors and semi-match parts on model kits. . .
@creationholic101
Ай бұрын
Thank you for sharing your feedback. Have a good day!
@shanepatrick4534
Ай бұрын
Are there any videos of this technique?
@sarahbrodbeck6444
29 күн бұрын
ah yes zap a gap... im an arch student and we used to all get a little dizzy before a review from the zap a gap fumes... but its a great and cheap product
@katsuhikotakasaki8200
28 күн бұрын
SHIYOUGI❤
Obrigada. Adoro concertar coisas e o seu vídeo vai-me ajudar muito. Abraço desde Sesimbra , Portugal
@creationholic101
2 ай бұрын
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
Merveilleuse astuce , vidéo très bien conduite, un grand MERCI et BRAVO !!! et bonjour de st MALO
@creationholic101
2 ай бұрын
Glad you like them!
Hola buenos días desde Santander Colombia, que buenos datos para arreglar elementos caseros,muchas gracias por su dedicacion.
@creationholic101
2 ай бұрын
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Sanding sand with sand paper, I think that may tear a hole in the time space continueium.
@hoptoit5910
2 ай бұрын
Well, it did the job. It worked.
@billsee476
2 ай бұрын
lol yeah just what i was thinking how do you get sand so smooth.
@larrygallagher6359
2 ай бұрын
My thoughts exactly...
@yurigagarin2662
Ай бұрын
Q wil show up somewhere somehow to correct the continuum issue, hè doesnt care mich about spacetime though.
Fantastic. I love the creativity in these fixes. Thank you SO much
@AndrzejSobots
2 ай бұрын
❤😢😢
@creationholic101
2 ай бұрын
Glad you like them!
Hi! I'm from South of Brazil. Congrats
Some great ideas there! What's the purpose of the last project with the coffee tin and the moulded pvc pipe?
@BigArt1970
2 ай бұрын
It's an example of how you can use the sand and a heat gun to mold the pvc around an obstruction, say this can if it was a pillar or pipe you needed to work around. 👍
@russelljones8651
2 ай бұрын
1/ how to get around an obstacle that is immovable -I guess, or 2? how to fill a pipe with sand and be enabled to bend it because the sand is in there and won't let it deform on you when bending it ( an Old steel workers trick when a pipe-bending device is not available,
@creationholic101
2 ай бұрын
Thank you! Cheers!
@77thTrombone
2 ай бұрын
The question has been answered. The objective & trick were not obvious until I recalled memories of buckled tubes & pipes. 1 thought: I thought the can was used as a bending form. (instead of a piping obstacle.) It gave me the idea that I'd use 2 smaller cans to form the bends on each side of the obstacle. (Or: Use 45 or 90 degree elbows at these points.) The wrinkly pipe in this demo is better than buckled pipe, but it's not great craftsmanship. Also: wrinkles may restrict flow and increase flow noises.
Gracias por compartir tus experiencias, sigue adelante, comentarios negativos que se queden con sus dueños. Te deseo mucho éxito, saludos desde California 🇱🇷😇.
@creationholic101
2 ай бұрын
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
Those are fabulous idias
شكرا لك احييك من الجزائر❤
@creationholic101
2 ай бұрын
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
NUNCA IMAGINEI ESTA COISA DA AREIA E SUPER COLA. MARAVILHOSA IDÉIA. GRATO PELA POSTAGEM.
@fabianoingles7496
2 ай бұрын
Cola capeta são boas demais.
@creationholic101
2 ай бұрын
Thank you for watching
A tip from Ukraine: instead of sand, baking soda can be used
@BigArt1970
2 ай бұрын
Baking soda works great. 👍 SLAVA UKRAINI 🇺🇦 ♥ 🇺🇸
@dgenr88
2 ай бұрын
Yep baking soda is what I use ,,,also you can use cotton wool to fill a hole then add superglue
@adolf-katz
2 ай бұрын
😂😂 hahaha, ça marche avec de la cocaïne aussi , demande à Zelenskouille....vive Poutine, vive la Russie !!!🎉🎉
@adolf-katz
2 ай бұрын
@@BigArt1970🎉🎉oui et c est pour ça que l'Ukraine est en train de gagner la guerre 😂😂😂 lol Vive Poutine !
@jin8684
2 ай бұрын
I use cocaine
MERCI du sud de le France, continuez à nous partager vos idées lumineuses.
@DAMENATURE-vo8ff
2 ай бұрын
@gitessalagou, Bonjour à vous, C'est bien vrai qu'elles sont lumineuses....et suis stupéfaite du résultat. Du coup, me suis abonnée et vais noter toutes ces richesses qui me serviront pour sûr dans mes créativités. Moi aussi, je suis du sud de la France, de la Provence, mais actuellement j'habite Paris, mais aie pour projet d'y retourner mes belles collines me manque tant ainsi que toutes les senteurs Provençales. Je vous souhaite une belle journée dominicale auprès des vôtres ainsi qu'une agréable continuation. Cordialement D.N.
@creationholic101
2 ай бұрын
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
EXCELENTE. SIMPLE Y FACIL DE REPETIR. GRACIAS.
@creationholic101
2 ай бұрын
Glad you like them!
I wish I had watched this video before😮 Amazing👏🏽thank you for sharing
@creationholic101
Ай бұрын
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
اشكرك على فيديوهاتك المفيدة والقيمة انا من سوريا 🇸🇾
@creationholic101
Ай бұрын
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
Hi, I'm from the Czech Republic, you have informative videos.
@creationholic101
Ай бұрын
Glad you like them!
Bonjour Monsieur, Merci beaucoup pour votre idée de sable et de colle forte, le résultat est juste époustouflant, merci à vous de nous partager tout cela et de ce fait, je me suis abonnée à votre chaîne et vous envoie tous mes compliments de 🇫🇷 En attendant vos nouvelles vidéos, je vais regarder toutes celles que vous avez faites jusqu'alors. Très bon dimanche à vous ainsi qu'à tous les vôtres, vous dis à très bientôt et d'ici-là, portez-vous bien. Bien à vous Dame Nature 🖐️
@creationholic101
Ай бұрын
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
These are great ideas! Thank you so much for sharing!❤💡
@creationholic101
2 ай бұрын
Glad you like them!
Greetings from Australia and thanks for the great ideas !
@creationholic101
2 ай бұрын
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
Très bon sable + super glue 👍
Suas Dikas 👏👏vc E um Super Gênio 👌💡
Western Australia. I enjoy your channel.
@creationholic101
2 ай бұрын
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
I'm from Denmark 😊 I like the part, hvere you repair the plastic.
@creationholic101
2 ай бұрын
Thank you! Cheers!
I knew about most of those but the grinding tool from a pop rivet I hadn't come across... I shall use that one 👍
@creationholic101
2 ай бұрын
Thank you for watching
WOW THIS IS AMAZING. THANK YOU.
@creationholic101
Ай бұрын
Glad you like it!
I like the fact you take time to show what's going on clearly. Some hack vids are such a crazy speed you have no idea what you're watching.
@bobbybeeman7280
Ай бұрын
Yea there are about a half dozen types of Loctite Super glue which one is it. I have never had ant to hold this good
@creationholic101
Ай бұрын
Glad you like them!
Muy útil. Excelente. Gracias. Te veo desde Colombia.
@creationholic101
13 күн бұрын
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
FABULOUS, Thanks so much!
@creationholic101
2 ай бұрын
Glad you enjoyed it!
Danke für die gute Idee. 👍❤️
@creationholic101
2 ай бұрын
Thank you! Cheers!
❤ شكرا لك احييك من ليبيا
@creationholic101
2 ай бұрын
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Tres bien trouvé 👍
@creationholic101
2 ай бұрын
Glad you like them!
Me gustado mucho su trabajo. Gracias por enseñarnos.
@creationholic101
Ай бұрын
Glad you like them!
Hi from N.W Wales GBR. Absolutely awesome video and defiantly using this forging blades for sanding awkward area's.
@creationholic101
Ай бұрын
Thank you! Cheers!
Vous êtes un bricoleur hors pair🎉merci et bravo.
@creationholic101
2 ай бұрын
Thank you! Cheers!
Very interesting. I have also used super glue mixed with baking soda to repair surfaces, including broken finger nails!
@creationholic101
Ай бұрын
Thank you! Cheers!
Congratulations, very ingenious!
@creationholic101
2 ай бұрын
Thank you! Cheers!
Smart simple ideas, but its usefull, thanks.
@creationholic101
2 ай бұрын
Glad it was helpful!
مبدع بلا حدود ،😍
@creationholic101
2 ай бұрын
Thank you! Cheers!
Genial belleza....!
@creationholic101
2 ай бұрын
Thank you! Cheers!
Great, practical creativity
@creationholic101
2 ай бұрын
Thank you! Cheers!
Sympa, ça marche aussi avec du bicarbonate, mais dans la vidéo ça ne peu pas être du sable, le sable ne ce lime pas et ne ce perce pas ! Je pense a du noyaux de fruit broyé ( qu'on utilise pour sabler une carrosserie par exemple )
@creationholic101
2 ай бұрын
Hello! thanks for your recommendation. Wish you all the best!
Brilliant tips, thank you
@creationholic101
2 ай бұрын
Thank you for watching
I'm from the UK, Nice to meet you! I just bought a Kamen Rider Stronger Figuarts that came with a broken leg peg. Superglue alone can't fix it, so I'll try this. How strange this video was recommended right when I needed it!
@creationholic101
2 ай бұрын
Glad it helped!
Greetings from Barcelona! I'm Sergi, nice to meet you. love your videos!
@creationholic101
2 ай бұрын
Awesome! Thank you!
Muy bueno tu video , saludos desde Buenos Aires , Argentina .
@creationholic101
Ай бұрын
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
ヤダヤダ、、、👍凄い🎉 キメの細かい砂だと、もっと見た目が 美しくなるかも❤
@creationholic101
2 ай бұрын
Thank you! Cheers!
Nice! I now know how to fix something I’ve had for years that I’m still using 👍👍
@creationholic101
2 ай бұрын
Glad you like them!
Avec sciure de bois aussi ,super l'idée merci beaucoup 🇫🇷🇫🇷🇫🇷
@creationholic101
Ай бұрын
Hello! thanks for your recommendation. Wish you all the best!
@florence3691
Ай бұрын
@@creationholic101 Thank you very much, you too
Wow !! Amazing, great idea!! Thanks !!
@creationholic101
2 ай бұрын
Thank you! Cheers!
Thank you the tutorial.
@creationholic101
2 ай бұрын
Glad it was helpful!
grandioso..bravissimo 👏👏
@creationholic101
2 ай бұрын
Thank you! Cheers!
Thank you, from Brazil!
@creationholic101
2 ай бұрын
You are welcome!
中文字幕一定要給讚! 來自台灣台北
Great ideas! Thanks
@creationholic101
2 ай бұрын
Thanks for watching!
Great ideas !!!
@creationholic101
2 ай бұрын
Thank you! Cheers!
Ciao Mr 123, nell' ultimo video dove metti la sabbia dentro il tubo, conviene prima fare la curva grande centrale con la pistola ad aria, e poi con una "guida" in acciaio (una piega tubi) fare le curve destra e sinistra sempre con la pistola..! Perché se questo metodo è per l'utilizzo dell'acqua..., di sicuro si avranno delle perdite...! Se intendi per passaggio fili di corrente o cos'altro allora va bene!
@creationholic101
2 ай бұрын
Hello! thanks for your comment. Wish you all the best!
Wow! Great ❤
@creationholic101
2 ай бұрын
Thank you! Cheers!
Luv ❤ the TECHNO MUSIC with this demonstration. 😊
@creationholic101
Ай бұрын
Thank you for watching
Nicely done. Very nicely done. Thank you.
@creationholic101
Ай бұрын
Glad you liked it!
Try super glue and powered charcoal. That's what we repaired helicopter blades with in Vietnam when they had rifle bullet holes in them. It hardened like steal.
@creationholic101
2 ай бұрын
Hello! thanks for your recommendation. Wish you all the best!
افكار مذهلة ، شكراً جزيلاً ، متابعة من مصر
@creationholic101
2 ай бұрын
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Fiz um conserto e ficou muito bom ..aprovado!
@creationholic101
23 күн бұрын
Glad it helped!
I am somewhat of a glue nut (I've never used that term before, ha). When in Thailand, I'd buy epoxy by the gallon. I'd use it for putting together an outdoor rock climbing park - with zip lines, and top-rope anchors in limestone karst. Often, I mix cement with carpenters glue - for all sorts of construction applications, including tile work. It's half the price and twice as strong as pre-mixed glues in hardware stores. To join metal without welding: thoroughly wrap the joint with baling wire. Think like a spider. Then slap epoxy on it. I'm 71, and just built a 15 ft high, all steel water tower, solo, using bolts and, at some other joints, using the baling wire thing. It's rock-solid.
@creationholic101
Ай бұрын
Thank you for sharing your feedback. Have a good day!
I like the ideas a lot 🎉❤
@creationholic101
2 ай бұрын
Glad you like them!
Thanks for these wonderful ideas, new subscriber
@creationholic101
Ай бұрын
Thanks for subbing!
Frank from Idaho, USA. Excellent video. Thanks.
@creationholic101
2 ай бұрын
Thank you too!
Cheap and effective, thanks
@creationholic101
2 ай бұрын
Happy to help
Looks like this could be a useful and cost effective way to repair potholes on roadways imho.
@antonioacevedodiaz5910
2 ай бұрын
NO , SERIA MUY COSTOSO , Y SE QUEBRARIA MUY RAPIDO , EL PAVIMENTO TIENE QUE SER ALGO ELASTICO QUE AGUANTE DILATACION Y CONTRACCION
@creationholic101
2 ай бұрын
Thank you for watching
Tout cela est très intéressant et surtout très pratique salutations à bientôt jp
@creationholic101
2 ай бұрын
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
S tím pískem je to opravdu vynikající nápad. Budu používat.
@creationholic101
2 ай бұрын
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Saludos desde Buenos Aires, Argentina 😘
@creationholic101
Ай бұрын
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
very clever , thank you
@creationholic101
2 ай бұрын
Thank you! Cheers!
Mercie bravo je suis d'algerie
@creationholic101
2 ай бұрын
Thank you! Cheers!
Thanks from Sweden!
@creationholic101
2 ай бұрын
Thank you too!
Harika bilgiler tşk.Türkiye
@creationholic101
2 ай бұрын
Thank you! Cheers!
Thanks a lot perfect I need it
@creationholic101
2 ай бұрын
Glad it helped!
Fascinante!!! Suscrita!!!
@creationholic101
Ай бұрын
Thank you! Cheers!
From 🇫🇷 j’aime beaucoup ce genre d’astuces. Abonnée 😊
@creationholic101
2 ай бұрын
Glad you like them!
Amazing trick👍
@creationholic101
2 ай бұрын
Thank you! Cheers!
Revolutionary inventions of human history
@creationholic101
2 ай бұрын
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
I’m a woman (The Netherlands 🇳🇱) and I love watching these kind of videos 👌👍
@creationholic101
2 ай бұрын
Glad you like them!
Que ingenioso.Felicitaciones.
@creationholic101
Ай бұрын
Thank you! Cheers!
Unas ideas muy interesantes 👏👏👏 ESPAÑA
@creationholic101
2 ай бұрын
Thank you! Cheers!
Thank you for sharing your tips, the hinge repair is exactly what I need to fix my cabinet door, they have those exact style hinges. You're a life saver! I'm from Southern California.
@creationholic101
2 ай бұрын
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Baking soda will work better than sand in most of these applications. super glue cures instantly upon contact with baking soda and it forms a hard polymer that will sand better than sand.
@creationholic101
2 ай бұрын
Hello! thanks for your comment. Wish you all the best!
Nice.👍
@creationholic101
2 ай бұрын
Thank you! Cheers!
like it !!!!!!!!! way cool ! wicked good !!!!!!!!!!!!!!!!!!!!
@creationholic101
2 ай бұрын
Thank you! Cheers!
Thank you for the video. What type of super glue are you using?
@creationholic101
2 ай бұрын
cyanoacrylate adhesive glue
BRAVISSIMO
@creationholic101
Ай бұрын
Thank you! Cheers!
Thumbs up from Germany.
@creationholic101
2 ай бұрын
Thank you very much!
Ingenious. It’s hard for me to get a superglue bottle to work after one use, even if I cut off the tip. I wish they would make a more pliable bottle to squeeze the product out. Same with caulking.
@user-xt9kj3ss5q
2 ай бұрын
Hi👋🤠; Here is a tip for helping the open tube of super glue from clogging... Just insert a push pin in the open end. It'll last ALOT longer.🤔👍
@Chichimomma
2 ай бұрын
@@user-xt9kj3ss5q OK I’ll try that. Thank you.
@creationholic101
2 ай бұрын
Thank you! Cheers!
Love it!From Portugal
@creationholic101
Ай бұрын
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
You are insanely genius.
@creationholic101
Ай бұрын
Thank you for watching
Terimakasih, good ide
@creationholic101
2 ай бұрын
Thank you! Cheers!
Very Good Thank You 👍👍👍👍👍
@creationholic101
Ай бұрын
So nice of you