I love your videos, I have been binge watching them for a week. I just got my LLC 2 weeks ago, and I purchased all of my products. I have been practicing on different papers for Sublimation along with vinyl, this video is so helpful for a glossy finish, I just put this glossy paper in my Amazon cart. Thank you so much for the step by step how to on the cricut and the Epson which is what I purchased for my small soon to be growing business. ❤❤❤

Thank you Delonda. I bought 2 rolls of htv ront for dark fabric but hadn't used it until I watched your video. I am grateful to God for your channel. If it weren't for you and your teaching, I would have thrown this cricut in the trash. Thaaaaaank Yooooooou so much.

@CraftingwithDelonda

11 ай бұрын

You are so welcome!

This like all your tutorials got me excited to craft

Absolutely BEAUTIFUL results!

@CraftingwithDelonda

11 ай бұрын

Thank you ❤️

This is awesome!!!! This replaces the need to use the clear vinyl and white vinyl. :)

I've had my eye on the new sublimation htv for a while now. Thank you for doing a review on it!

@CraftingwithDelonda

11 ай бұрын

You're welcome

Girl! You is KILLING the game!!! I love it, I love it!❤❤❤❤❤

@CraftingwithDelonda

11 ай бұрын

Thank you so much! I am taking advantage of my time, lol! Thank you for joining me.

Love your videos, Delonda. You are so bright and cheerful and honest. I purchased the Siser Juliet after watching your video. I can’t wait!

@CraftingwithDelonda

11 ай бұрын

Thank you so much! You are going to love the Juliet!

GO-JUS!! Gorgeous. Your energy is everything. I Love it!

@CraftingwithDelonda

11 ай бұрын

Thank you so much!!

This was amazing, I enjoyed watching the video 👏🏽👏🏽👏🏽💖

@CraftingwithDelonda

10 ай бұрын

Thank you so much 🤗

Oh my goodness Delonda those colors are poppin! I have to try this

@CraftingwithDelonda

11 ай бұрын

You can do this! I love this stuff.

Omg. Game changer. I’m doing this tomorrow. Thank you so much. ❤❤🎉

@CraftingwithDelonda

11 ай бұрын

You are so welcome!

As a beginner I have watched a lot of videos and you give my mind ease and feel so genuine. Thank you!

@CraftingwithDelonda

7 ай бұрын

You are so welcome!

I just bought 3 rolls of that vinyl. So glad you are sharing how to use it- thanks!

@CraftingwithDelonda

11 ай бұрын

You are so welcome!

I LOVE IT, thanks for sharing sis

Sistren... nuff RESPECT...tutorials are helping I on the journey 2 build inventory 4 upcoming 2024 craft fair's.

your videos are always so helpful.

@CraftingwithDelonda

11 ай бұрын

I am glad you found it helpful.

That is awesome..I needed that shirt for Battle of the Bands... my daughter goes to TSU and she in the band...well never to late to try and make one.. thanks for an awesome tutorial

@CraftingwithDelonda

10 ай бұрын

You can do this! I wore mine to the battle of the bands here in last month.

I am just finding your video and I am ever so grateful!!!!! Thank you.

@CraftingwithDelonda

3 ай бұрын

I'm so glad you found me.

I have looked at this twice. I got it & I too, Love it!!!

@CraftingwithDelonda

8 ай бұрын

Thank you ❤️

Thank you so much I lv been watching you videos nonstop I’m a newbie and your videos are a great help

@CraftingwithDelonda

4 ай бұрын

Thank you so much ❤️

I love it I buy the dark htv and I did not know how to use it thank you for the lesson

@CraftingwithDelonda

11 ай бұрын

You're very welcome!

I always love watching your videos. I learned so much from you I just tried to do what you just did and I screwed it all up so I said I’ll come and watch yours and guess what I did it. Thank you for all your help.

@CraftingwithDelonda

10 ай бұрын

You're very welcome

Hi Delonda, thanks for the video and you have such beautiful skin.

Thanks so much for the preset thing and paper type info. You're the best

@CraftingwithDelonda

8 ай бұрын

Thanks for watching

THANK YOU Delonda for showing what side of the htv to put on the circuit pad

@CraftingwithDelonda

7 ай бұрын

You're very welcome

Loved how you removed that piece. That does happen, that is going to help tremendously, Yes! Thank you Ms. Delonda. That shirt was Very Nice! 💗

@CraftingwithDelonda

2 ай бұрын

You are so welcome

Hi Delonda, Thank you for showing this on a Cotton Tshirt. I am practicing to start a new business and I was avoiding Cotton T-shirts and getting blend. I wondered why my print from my Canon sub printer didn’t transfer on a cotton tshirt but now I know I needed a white print printed on my Cricut Explorer 2 first. I am Loving your videos. Step by Step Tutor is exactly what I need. You are Awesome!! Keep them coming.

@CraftingwithDelonda

6 ай бұрын

Glad it was helpful!

I love it !! Video was very detail. I had trouble with offsetting of the sublimation vinyl. Im gooing to retry.

@CraftingwithDelonda

11 ай бұрын

Try using 0.08 instead 0.06, it was hard to line it up. Thanks for watching!

love the little hack to remove heat transfer vinyl thank you

@CraftingwithDelonda

10 ай бұрын

Thank you ❤️

thank you Delonda for this tutorial, I bought a few weeks ago this kind of vinyl , i will try it and let you know

@CraftingwithDelonda

9 ай бұрын

Thank you ❤️

Beautiful I Love it Thanks for sharing this ❤

@CraftingwithDelonda

11 ай бұрын

Thanks for watching!

Great tutorial

@CraftingwithDelonda

11 ай бұрын

Thank you! Cheers!

You did awesome…. 😊❤ i love it…❤

@CraftingwithDelonda

11 ай бұрын

Thank you ❤️

I love your videos! I am in Tomball!!! Thanks

I just have to pull my htv font sublimation htv out! Thanks for walking us through the process.

@CraftingwithDelonda

11 ай бұрын

Thanks for watching Marilyn!

Love this shirt!!

@CraftingwithDelonda

11 ай бұрын

Thank you!

Delonda you explain so easy

@CraftingwithDelonda

11 ай бұрын

Thank you!

I love it!

@CraftingwithDelonda

11 ай бұрын

Thank you!

Thanks for another great video. Omg you have a lot of printers on your drop down menu ❤

@CraftingwithDelonda

11 ай бұрын

Thanks for watching! I just double-checked and I only see one printer. I did list all of the other materials that I used though.

My cotton t-shirt queen 😍

@CraftingwithDelonda

10 ай бұрын

🤣🤣🤣🤣

You Now What ❤ it!!

@CraftingwithDelonda

9 ай бұрын

Exactly 🤣🤣🤣

I love watching your videos. The pointer finger stick makes me laugh. And to see the excitement on your face when you reveal your project makes me smile!! Thanks for the uplifting well explained videos!!

@CraftingwithDelonda

11 ай бұрын

Thank you ❤️

This was so helpful.. thank you

@CraftingwithDelonda

11 ай бұрын

You're so welcome!

Thanks Delonda! I made a mistake like that and left it. Now I know how to correct it next time. 💘

@CraftingwithDelonda

11 ай бұрын

Glad it was helpful!

thanks so much you are so helpful love the tip for a piece of vinyl left, what tempeture did you use for mini press

well done delonda

@CraftingwithDelonda

6 ай бұрын

Thank you!

Awesome Awesome Awesome!! You are my favorite, you teach everything with such ease. Thank you! When you do this hack do you feel the image on the shirt like iron on?

@CraftingwithDelonda

3 ай бұрын

Wow, thank you! I wouldn't say that it feels like iron on; but you can definitely feel the image on the shirt. It is soft though.

Good video thanks looks good ❤

@CraftingwithDelonda

11 ай бұрын

Thank you very much!

Thank you so much🥰

@CraftingwithDelonda

9 ай бұрын

You're welcome 😊

I know this is off topic but your skin is so pretty lol.

Hi Delonda. Thank you for this video. I have trouble lining up the design with the vinyl. Do you have any tips for improving my accuracy? Is it related to the offset? Thank you!

Thank you!!😊

@CraftingwithDelonda

11 ай бұрын

You're welcome 😊

😵😳I love their vinyl….. be right back let me go to amazon 🤞🏼😘

@CraftingwithDelonda

11 ай бұрын

🤣🤣🤣🤣

Love Love 💕 😊

@CraftingwithDelonda

11 ай бұрын

thank you!

From one Texan to another, you are so cute!

@CraftingwithDelonda

11 ай бұрын

Thank you ❤️

Oh good I have tgat in matt and glossy

@CraftingwithDelonda

11 ай бұрын

For some reason, I only have it in glossy. I need to get some of the matte.

That is fresh to def! What is the hand with the vinyl? Is it heavy?

@CraftingwithDelonda

9 ай бұрын

Thank you! It's not heavy at all.

DeLonda, I’ve finally moved to Huntsville and have missed watching your videos….A couple of questions… have you washed the shirt using the HTVRont transfer for dark colors? If so, how did it hold up? Does it come in a matte finish? Is the image stiff from having the transfer vinyl below it? What is your opinion of the HTVRont heat press? I LOVED the “fix” you shared on how to remove unwanted vinyl… I have had this happen too and wasn’t able to fix it properly. Have a blessed day.

@CraftingwithDelonda

11 ай бұрын

Hi there. Here is the wash update. It feels like htv. Yes it comes in matte and I like the htvront heat press.

I absolutely love you videos. I tried another sublimation vinyl and its just not working, will try HTVRONT

@CraftingwithDelonda

10 ай бұрын

Thank you so much! I have actually had a lot of success with this stuff.

I enjoy watching your tutorials, you explain everything so calmly. Why does everyone call it sublimation when it's not embedded into the material. Hopefully someone can make up a better word for it . Just Saying 😊

@CraftingwithDelonda

11 ай бұрын

That's a great question. I guess because of the name of the material. Maybe just excitement, lol. Thanks for watching!

@MegaTerrance123

10 ай бұрын

It's embedded into the vinyl

Another great video. I wish Brother included tshirt templates in the Brother ScanNCut.

@CraftingwithDelonda

10 ай бұрын

I wish there were templates in Leonardo Design Studio too.

Delonda what size printer are you using, Like I say the videos are so helpful, I am thinking about getting the Romeo ,

@CraftingwithDelonda

11 ай бұрын

This is just a regular Epson ET 2760; but it will print up to 8.5 x 14

🔥🔥🔥🔥🔥

@CraftingwithDelonda

11 ай бұрын

Thank you!

Hello. I've enjoyed watching your videos so far. I have a question. I am new at this. I have an Epson WF 4730. I purchase A4 paper, I've purchased the A4 t-shirt, and I have a heavy duty heat press. I also change my settings as recommended. I heat at 400 for 60 seconds. I am not getting any of the image onto the t-shirt. It only comes out faint yellow leave me a shadow. What am I possibly doing wrong?

Hi Delonda, may I ask why you put the setting for the sublimation paper to infusible ink transfer sheet? Also, I did all if the same steps and my white can put looking muddy. Was it too much pressure you think? I don’t have an automatic. I only have the heat press that you have to adjust the pressure. Thanks

@CraftingwithDelonda

10 ай бұрын

Great question! I like using that cut setting because I seem to get accurate cuts with it. Sometimes with other cut settings, I will have to send the item through multiple times to get it to cut all the way through.

How did you cut just the outline for the sublimation sheet?

❤️❤️❤️❤️❤️❤️

@CraftingwithDelonda

11 ай бұрын

❤❤❤

Does this feel softer than printable vinyl?

Great job!! Do you prefer this over DTV?

@CraftingwithDelonda

11 ай бұрын

Thank you! Yes because the colors are more vibrant.

Delonda, does the mini press need to be warm in order to peel the piece of leftover HTV?

@CraftingwithDelonda

11 ай бұрын

Yes. I am so sorry I didn't show that part. I turned it on the 2nd light I think.

Hi Delonda Great video. I've how you describe all the materials used for the project. What is the difference between parachute paper and butcher paper?

@tanyacarter873

11 ай бұрын

Like

@CraftingwithDelonda

11 ай бұрын

Thank you ❤️ I use Butcher paper to prevent the ink from getting on my heat press or from going through my fabric, when I am doing sublimation. I use parchment paper when I am pressing heat transfer vinyl, to prevent the vinyl from shrinking.

Hey DeLonda “with my best friend name “ my daughter just move to Houston yesterday (Saturday)to go to TSU 😊

@CraftingwithDelonda

11 ай бұрын

Whaaaaaaat!!!!! She is going to love it! Tell her to stay focused. It took me a very long time to graduate because I didn't have my priorities in place.

Delonda, I’m not sure if you have mentioned this before, but how is the feel of that HTV Ront for Sublimation compared to regular HTV?

@CraftingwithDelonda

11 ай бұрын

It feels like regular htv; but I would honestly prefer this method over sublimation on glitter htv.

How do you cut the htv paper on the Cricut? When I attempt to cut it, the machine isn't able to find the lines. Do I have to recalibrate my machine?

I'll try this one because the light fabric sublimation is fading (getting blurry) after one wash

Delonda this may be a silly question but after you cut out the htv will the cricut automatically let you put the sublimation paper back in and cut that design out or do you have to press something else?

@CraftingwithDelonda

9 ай бұрын

That's not a silly question. After you cut the htv, send your image to the printer and then allow your Cricut to cut it out.

😊

@CraftingwithDelonda

11 ай бұрын

Thank you!

Hi Delonda you may have just saved my Cricut ! I were just trying to do the same thing and it is a hot mess

@CraftingwithDelonda

11 ай бұрын

Oh no! You can do it!!

Hi Delonda, Thanks for all you do - I have a goofy question is there a difference between the percut dark 12x12 you used and the roll? In addition, I purchased ( HTVRONT Heat Transfer Paper for Dark T Shirts -10 Pack Iron on Transfer Paper for Inkjet Printer, Easy to Use Printable Heat Transfer Vinyl) not reading it correctly -ugh I do not have a inkjet printer I only have a ink cartridge in my office I do have the Epson 15000 - is there any way to use this at all ? Thx for your time

@CraftingwithDelonda

11 ай бұрын

Hi there. I am not familiar with the pre-cut dark 12 x 12 paper. This one that I used is designed to be used with sublimation printers. Does your Epson 15000 have sublimation ink inside or the ink that came with the printer? If it has sublimation ink inside and you have set up your printer for sublimation printing, you can use the same material that I used in this video. In order to use Transfer Paper for Dark T-Shirts, you would need to use an inkjet printer.

@kymberly2460

11 ай бұрын

@@CraftingwithDelonda Thx for responding I didn't explained myself clear (sorry 😊) you used sheets I purchased a roll of dark and light .I do have sub ink iny Epson 1500 I just wasn't sure if it was the difference between the sheets and the roll Thank you Have a good day

@CraftingwithDelonda

11 ай бұрын

@kymberly2460 oh, I understand now. There is no difference in the sheets vs the rolls, except the price. You should be good to go.

@kymberly2460

11 ай бұрын

@@CraftingwithDelonda Yah! your Awesomeeeeeeeeeee

Anyway you could do a video for a light switch plate w sublimation?

@CraftingwithDelonda

11 ай бұрын

I responded to your first request yesterday about this same question. Your comment is coming across as rude. As you can see in the title of this video, this has nothing to do with a light switch plate. If this is not what you are looking for, please look elsewhere.

Hi, cricut still waste so much space 9.8/14". Can you please do a print then cut on Romeo with same size 8.5×14? Thanks

@CraftingwithDelonda

11 ай бұрын

Now, that is a REALLY great idea!!! I definitely will.

That is why I use other programs for print and cut

@CraftingwithDelonda

11 ай бұрын

You know I know 😏

What's the darkest color of shirt can you use withe t sublimation dark htv

@CraftingwithDelonda

9 ай бұрын

I have used it with black shirts too.

Thanks for doing this! I have the Htv, but sitting on it for some reason. Thanks for the motivation

@CraftingwithDelonda

11 ай бұрын

You will love thus stuff. It is easy to use and it holds up nicely in the wash!

@stacyjones200

11 ай бұрын

I use this product all the time and it's great.

This is a great tutorial! Does that htv come in a matte finish?

@creativestudiobydeedee8942

10 ай бұрын

Hey! I just looked on the website and I found the sublimation htv but none of them say for dark colors. Also, I did see the gloss and matte.

@CraftingwithDelonda

10 ай бұрын

Use the link below the video for the glossy.

@creativestudiobydeedee8942

10 ай бұрын

@@CraftingwithDelonda thank you, I do want matte but I found it on Amazon and it’s the htvront brand 🙂

I need help. I got the htvront sublimation vinyl and I subbed on it. I waited 2 weeks to even wash it and I took it out of the dryer and it was a red white and blue flag and the blue bled everywhere onto the white vinyl part. I asked sublimation groups and they said this is a thing and it happens and they haven't found a fix. 😢 I don't know what to do now.

@CraftingwithDelonda

10 ай бұрын

Oh no! I am so sorry to hear that. Did you use the sublimation vinyl made for dark fabric, or the clear one?

Hey what can I use in place of the butcher paper

@CraftingwithDelonda

11 ай бұрын

Cardstock

Hi, why mine looks faded.. Colors doest transfer that much like your 😢 wish u could help

@CraftingwithDelonda

8 ай бұрын

Oh no. What kind of ink are you using?

Hi there, was hoping to find a trick on how to use this sublimation htv on red shirts? The red bled through the white htv, so I am prewashing with white vinegar to see if that helps... Anybody got any tricks?

@CraftingwithDelonda

7 ай бұрын

Make your white offset smaller.

Could you possibly do a design that's matte and not shiny on a comfort colors t-shirt? Thanks! :)

@CraftingwithDelonda

10 ай бұрын

See if this is helpful kzread.info/dash/bejne/nZlrlLaHc9fac9I.html

@italyorduna3621

10 ай бұрын

@@CraftingwithDelondathank you!!

Can these products be used on sweatshirts?

@CraftingwithDelonda

4 ай бұрын

Yes, they should work.

Is it not okay to mirror in design space? Do you have to only mirror print settings

@CraftingwithDelonda

4 ай бұрын

That's how I do it.

@user-nl7zb6fx7j

4 ай бұрын

Okay I am trying it your way to see if it matches up better to my vinyl. I am struggling to get the print then cut to line up with my vinyl. The vinyl has been coming out bigger than my print and will absolutely not line up

Hey Hey, TSU!!

@CraftingwithDelonda

11 ай бұрын

Yes, my alma mater!

@barbra429

11 ай бұрын

@@CraftingwithDelonda Ocean of Soul, Lanier West, Dowling street. I must be getting old. Those were some good old times.

@CraftingwithDelonda

11 ай бұрын

@barbra429 yes!!! I didn't see Frenchy's! Yes, yes, yes

@barbra429

11 ай бұрын

@@CraftingwithDelonda Frenchys, I think I remember, Little food shack that served Louisiana cuisine, oh my goodness, some of THE best food ever.

Hello Delonda

@CraftingwithDelonda

11 ай бұрын

Hi there!

What do you use on your skin. It's flawless 😭😭😭

@CraftingwithDelonda

9 ай бұрын

Thank you ❤️ Hot water.

Does it feel thick and plasticky?

@CraftingwithDelonda

11 ай бұрын

In my opinion it feels like htv.

I can never get my offset vinyl to line up with my print then cut 😢

@CraftingwithDelonda

4 ай бұрын

It's actually hard to do. Try making the offset a tiny bit bigger.

@user-nl7zb6fx7j

4 ай бұрын

I will try, thank you

The gray shirt is not a dark fabric or could it be because it’s cotton

@CraftingwithDelonda

11 ай бұрын

It works on dark fabric and cotton 🤣

Question. Could you have duplicated the image and made it a basic cut instead of adding an offset??

@CraftingwithDelonda

11 ай бұрын

Yes!

@CraftingwithDelonda

11 ай бұрын

But, the white layer shrinks a little bit, so it still has to be bigger than the image.