If you put the Teflon sheet back over it and press again for 5 to 10 seconds I think you will see a large difference. Dtf actually requires two presses. One like you did and another to finish it, after the second you will see the gloss factor will be much more intense. Love watching.

@CraftingwithDelonda

Жыл бұрын

Thank you very much for letting me know. I really do appreciate that.

@boylesrena11

Жыл бұрын

Does nothing come off onto the teflon sheet ??

@greggouveia5243

Жыл бұрын

@@boylesrena11 Not at all. It does matter what color shirt you use, I find I still go back to ppd transfer for black or dark. If doing a color print there is no cutting and weeding. The colors change depending on the color of the shirt. Wish dtf workes all all colors but it doesn't. Have you tried ppd transfer paper. You have to cut it around the design if you don't want the square look. But no problem with the cut and pr8nt software and cutters, press 13 seconds and done, no second press. Colors are true and use the dark shirt paper, it works on all color shirts, no mirroring.

@taradalmatianshaver6828

Жыл бұрын

Thank you for this video, you did a wonderful job of explaining everything

@CraftingwithDelonda

Жыл бұрын

I appreciate that.

I do DTF printing and press my prints @ 150°C for 10 seconds. The reason for cold pealing is for the melted glue to cool as to not come off the fabric when peeling. The shorter press time avoids the bubbles in your prints. The powder glue actually starts boiling after a maximum of 15 seconds and causes the bubbles you see in the Gnomes hats. A second press is done with silicone paper to set the print. Hope this helps 😉

@CraftingwithDelonda

Жыл бұрын

Thank you for sharing that.

@katiealtis

Жыл бұрын

What type of silicone paper do you use?

@engelavanwyk7731

Жыл бұрын

@@katiealtis the shop I buy from repacks, so there's no branding on the packets.

@egattshall2835

Ай бұрын

@@engelavanwyk7731 I am new to this and learning a lot, can you tell me what you mean with a second press? do you mean after its pressed 10 seconds, cools and peels that you press it again with the silicone paper only? also if you mentioned the powder boils after 15 seconds should it be heated on the heat plate before being pressed? I've seen this done in a couple videos.

I love your videos, I've been following you for a little while and I love the step by steps and the transparency 😍 I really enjoy making shirts just trying to get this sublimation down pack🤦🏾‍♀️

@CraftingwithDelonda

Жыл бұрын

Thank you 😊 You can do it!

I am so glad I found your channel! You are very real with your reactions and advice. You are very appreciated by this new subscriber!

Delonda, you are the only KZreadr that I have sent some $$ to. I love your energy and the amount of clear and honest detail you provide is amazing. Thank you!

@CraftingwithDelonda

Жыл бұрын

Wow, wow, wow! Thank you so much. I really do these tutorials because I LOVE to teach; but I sincerely appreciate the gift. Thank you very much.

@kofaminc

Жыл бұрын

Totally agree

I absolutely love your channel. Your directions are easy to follow and the results are amazing. Thanks so much, you rock!

@CraftingwithDelonda

Жыл бұрын

Thank you so much!

Thank you so much for this video Delonda! I’ve not tried sublimation yet, but I’ve been watching different methods and different videos. I really love how you take the time to explain this hack. I can’t wait to set up my printer for sublimation.

@CraftingwithDelonda

Жыл бұрын

You're very welcome ❤️

Great, ready to try! Looks so much easier than heat transfer sheets! Love you easy to follow directions! I'M a fan for sure ...

@CraftingwithDelonda

Жыл бұрын

Thank you so much 😊

I love how you encourage your watcher to do what is best for them instead of whatever works best for you. Thank you!

@CraftingwithDelonda

Жыл бұрын

Thank you ❤️

That was a great introduction to what my husband and I are interested in getting involved in for a side hustle. Thank you so much for walking us through! The Gnomies sublimation looks great!

@CraftingwithDelonda

Жыл бұрын

Thank you so much and best of luck to both of you!

I'm getting more confident with sublimation because of your videos. Thanks Delonda. Much appreciated.

@CraftingwithDelonda

Жыл бұрын

Thank you so much

Hi Yolanda , first I just love watching your videos! So very helpful and you are just so nice and bubbly. I have discovered that using a heat gun to melt the powder works amazing. Hovering are und an inch or 2 and working in small sections. I have a htvRont heat press but the heat gun I find no reason to use the 385 setting to melt. Also I’ve used the method you showed on white cotton as well as light colored cotton shirts too. Wow ! They turned out perfect. A little offset and a couple with 0 setting offset. Thanks again 😊

This is was super helpful. I purchased the DTF supplies a month or so ago but was to intimidated to try. Your video was a great step by step and appreciate the pros and cons. Thanks again. Tracy. 😊❤

@CraftingwithDelonda

Жыл бұрын

Glad it was helpful!

This is the first video I've watched on sublimation because I really thought it was going to be beyond my ability but after watching your instructions I have no doubt at all that I can do this! I'll probably be up all night watching your other videos. Thank you so much for making these and for your bubbly and enthusiastic personality :)

@CraftingwithDelonda

Жыл бұрын

I appreciate that!

@daniellelambert3463

Жыл бұрын

S😮😮

@rhondacalloway1863

11 ай бұрын

I feel the same way what a blessing

What an awesome tutorial. I have been wanting to do this and was so afraid, you made it look so manageable. Thank you!!

Great video. Haven’t tried this yet and now I just might! Thank you!

Subscribed! You are awesome. You explain the process so well and to be honest I’m less intimidated to try sublimation because of you. I didn’t like that white polyester was my only choice and now I’m thinking of diving in. Thank you!

@CraftingwithDelonda

Жыл бұрын

Awesome! Thank you so much and welcome aboard! I am sure you can do it.

I can't tell you how much I love your step-by-step tutorials. Thank you.

@CraftingwithDelonda

Жыл бұрын

You're very welcome ❤️

@kofaminc

Жыл бұрын

I’m going to have to follow her now cause she made those so much easier for me.

Thank you again for this video as well. I also think it is a bit more pricey, but you have to admit that it looks great and not a thick layer of vinyl. Love that you're so honest about the whole process. You're amazing 🥰

@CraftingwithDelonda

Жыл бұрын

Thank you ❤️

I just ordered my first small heat press and I needed to get guidance and help, you are so good at explaining this process, so genuine!!!

Thank you for showing this! I was wondering how it was done and you made is very easy to understand. 😊

@CraftingwithDelonda

Жыл бұрын

You’re welcome 😊

Lol .. love the pointer I love how you go into detailed on products used.. and everything.. so needed when learning.. This turned out sooooo good!!!

@CraftingwithDelonda

Жыл бұрын

Glad it was helpful!

Your commentary during the shaking earned you a sub from me! This is awesome!

I've seen so many videos on diy DTF and yours is the only one that makes since. Thank you for sharing this with us.

@CraftingwithDelonda

Жыл бұрын

Wow, thank you!

I have an Epson 2800 and I am using the same ink. I put my setting on photo paper and no need to tape paper behind it which can take away from your printing area depending on your image size or stack papers behind it. I hope this helps someone. :)

@cyborgrat

22 күн бұрын

it might, just got one and doing my Recherche on how to do sublimation.

Thanks for the content. I usually don’t comment on videos; however your content is straightforward and definitely encouraging. I thank God for your energy and willingness to share.

@CraftingwithDelonda

Жыл бұрын

Awesome! Thank you!

This video helped me so much!! Thank you for explaining things so well!

Thanks Delonda for your clarity, honesty and engaging vibes. Such good energy. 💛

Complete and thorough description and tutorial from beginning to end! Great job! Usually people skip steps assuming the viewer knows what is next. This video was super helpful and I subscribed immediately because I like your explanations. Thank you!

@CraftingwithDelonda

Жыл бұрын

Thank you so much. I appreciate that.

Love it and so stinkin' cute! I have tried this twice and had great results too! Tracey

@CraftingwithDelonda

Жыл бұрын

Thank you! I am glad that this process works for you.

Thank you! I just started sublimation so it will be awhile before I try this method but I loved your video and I watched until the very end without skipping! Which means you are fantastic, engaging, thorough, and direct. I’ll definitely be returning to watch more videos ❤

@CraftingwithDelonda

Жыл бұрын

Thank you so much 😊

I’m loving your energy! I’m just getting started, so glad I searched around until I found you.

@CraftingwithDelonda

Жыл бұрын

Thank you kindly.

Your tutorials are great. I watched this one 3x's. The first 2 to build my confidence, the 3rd one we went step by step together. My first one turned out pretty good. The ink smeared a little when it printed, but that's ok. Thank you so much.

@CraftingwithDelonda

Жыл бұрын

You’re very welcome 😊

I love this method! I have not tried sublimation on a shirt, but this encourages me to try it. Also, thank you for reminding us that we don't have to use the brands that you use. People tend to get stuck on a particular brand just because the content creator uses it, even though it might be out of budget. Great tutorial, as always 🥰

@CraftingwithDelonda

Жыл бұрын

Thank you 😊

@marilynadams8776

Жыл бұрын

3Replay

@CraftingwithDelonda

Жыл бұрын

Thank you

THANK YOU!! Enjoyed very much! Love your full transparency way of explaining things!

@CraftingwithDelonda

6 ай бұрын

Thank you ❤️

Great tutorial! You taught me a step I left out when I tried using this method.

@CraftingwithDelonda

Жыл бұрын

Thank you 😊

Well, you are the most easy person to follow when you explain something, great tutorial and clear instructions.

@CraftingwithDelonda

Жыл бұрын

Thank you 😊

Hi Delonda, I have never seen an tutorial demonstrated so professional just want to say thank you so very much. I feel like you the only u-tuber I need to watch again thank you🤩

@CraftingwithDelonda

Жыл бұрын

Thank you kindly.

@fjmi

5 ай бұрын

I totally agree. Very through and professional. Your teaching method is superb 👍🏾. I receive so well from you. You keep it so so simple. My brain 🧠 can sometimes become dyslexic but not watching your tutorials. Again, thank you!

😊The most helpful sublimation video I’ve seen! Thank you!

@CraftingwithDelonda

Жыл бұрын

Wow, thank you!

Just bought stuff to do this but haven’t tried it yet. Your instructions helped me feel more confident about doing it. Thanks!!

@CraftingwithDelonda

Жыл бұрын

You can do it!

You’re awesomeness in a KZread jug!!! 😂. Let me tell you why. You do not talk to much, just enough. Quick facts for this mom and teacher. Lastly, You are all about time and money. Thats my girl!!! You find the simple methods and tell us what we need and been searching to hear all in one video. Quick and to the point. Did I say you do not blabber to do this. Short and sweet. Keep up the great work.

@CraftingwithDelonda

Жыл бұрын

I appreciate that! Thank you very much!

I enjoy learning from you and your content. It doesn't feel gimmicky and you explain everything in such great detail, that I can watch it one time and be able to make what you have just taught! Thank you for making learning easy for people like me, an audio-visual learner!! I hope you continue to be successful because you rock lady! 🤘😃

@CraftingwithDelonda

Жыл бұрын

Thank you very much! I really appreciate that.

@lismariecorrea2565

Жыл бұрын

Hello question I want to start but idk which printer to purchased and also what I need to buy?

@CraftingwithDelonda

Жыл бұрын

Everything I used is linked below the video.

@elijahspencer7495

9 ай бұрын

​@@CraftingwithDelonda You should try using a sieve for the powder.

@CraftingwithDelonda

9 ай бұрын

@elijahspencer7495 that's a great idea.

Hands down the best video of how to use DTF and the powder!! Thank you!

@CraftingwithDelonda

Жыл бұрын

Wow, thank you!

Oh thank you, thank you, thank you! Been looking for this kind of tutorial like forever! Finally. Easy instructions, and fun to watch. Much love from Malaysia! ❤

@CraftingwithDelonda

Жыл бұрын

Thank you so much 😊

That was amazing! Thanks for doing it even though it’s not your favorite method. I appreciate it so much! I think the cost is much less than estimated because the initial cost of the powder can be spread across multiple shirts and remainder that doesn’t stick to an image goes back into the container. Again, my thanks!

@CraftingwithDelonda

Жыл бұрын

You are so welcome!

@tarastocum1361

Жыл бұрын

I am seeing 2 different gordora powders which did you use the white or black?does it matter which one I use on gray

@CraftingwithDelonda

Жыл бұрын

I linked the one that I used below the video.

I would only suggest using the DTF sublimation hack if you have a large, well-ventilated work area. I did the DTF sublimation hack with a different brand DTF powder - and in my small house, it caused me to have breathing issues. It doesn't have a smell, so be cautious or use protective equipment.

@CraftingwithDelonda

Жыл бұрын

Thank you so much for that tip.

I love how honest you are about what you love...

Thanks for the step by step instructions. Love how you show using other printing method than design space from Cricut

@CraftingwithDelonda

Жыл бұрын

You are so welcome!

Little do you know your my mentor 😂😂. If I did not find your channel I was going to give up😢

This is beautiful. What is it you don’t like about the process, Yolanda? I tried and my results weren’t as good but I was using dtf powder I got two years ago for a printer I never set up. Have fresh paper and powder being delivered today. Going to make me a cute Thanksgiving shirt. Love your videos, BTW!!

@CraftingwithDelonda

Жыл бұрын

Thank you very much! I just think there are too many steps. I really do love the results and I am pretty sure it will wash well.

Delonda this is awesome!! Thanks for comparing! ESP for someone like me who apparently picked EXACTLY the stuff you use, same printer, same heat press 🎉 thank you for the shortcuts! In the future if you outgrow using Word I am in LOVE with Silhouette Studio even though I have a Cricut and can print sublimation images from there!

@CraftingwithDelonda

Жыл бұрын

Thank you!

Thank you for being so honest and always teaching us so many amazing things

@CraftingwithDelonda

Жыл бұрын

You are so welcome!

I enjoyed your video-especially with your step by step instructions and various options.

Loved this video, you’re a blessing to me because you made it look so easy. Great job!

@CraftingwithDelonda

Жыл бұрын

Thank you so much 😊

I've been using HTV backing for my sublimation t's. This is a game changer because I really don't like the feel of the backing on cotton t's. I'm going to be changing my process, thanks to you. You really explain the process better than other vids I've watched. Thank you so much!

@CraftingwithDelonda

8 ай бұрын

Thank you so much ❤️

I haven't watched any of her videos, UT gosh, I already love her! Seriously, she's just so amazing!

@CraftingwithDelonda

7 ай бұрын

Thank you ❤️

Hi, Delonda. Happy Holidays to you and yours. Thank you for this tutorial. I was already familiar with the DTF hack, but I never thought about using Word for a print. This was well appreciated. Thank you for teaching.

@CraftingwithDelonda

Жыл бұрын

You are so welcome!

Finally! I have been trying to find someone to show the process from beginning to end. Thank you for sharing!

@CraftingwithDelonda

8 ай бұрын

You're very welcome

I love this... I have a sublimation printer already but I love the idea of DTF printing... and now I can do both!!!!

@CraftingwithDelonda

Жыл бұрын

Thank you

This was absolutely the BEST sublimation hack ever!!! Besides cost, yes I would do this one too. I have the HTVRont sublimation vinyl and have not used it yet. Let me run over to your video to see how to use it. Thank you sooooo much for your tutorial.

@CraftingwithDelonda

Жыл бұрын

Thank you so much ❤️

You are so great at explaining things! Thank you!

@CraftingwithDelonda

8 ай бұрын

You are so welcome!

Thank you so much for yet another wonderful tutorial! I love watching your videos. ❤

@CraftingwithDelonda

Жыл бұрын

You are so welcome!

Thank you for this tutorial!!! I was looking for a great how to video and this was awesome!!! Got a heat press yesterday (been using my cricut easypress 2) and wanted to try this on some cotton shirts. Got the paper and powder so will be doing one this weekend!

@CraftingwithDelonda

Жыл бұрын

You are so welcome!

Thank you so much for this tutorial. It was a win for me. I had no problems, thanks to your share. I bought all of my supplies 8months ago. I finally got it done.

Delonda, I just stumbled upon your video. Thank you thank you thank you! Long story but I’ll try to make it short. I’ve been following many coaches as I try to take my business to new heights. Someone recommended I get an Epson ET 15000 to do eco solvent dtf prints. I ordered it the same day. I let my cousin whose been in business longer than me talk me out of doing DTF but I couldn’t get the hang of regular sublimation. So now I’ve had my printer two months ($762) and haven’t used it since my first try with photoshop. The color that printed wasn’t the color on the laptop screen. BUUUUT you just gave me hope. I love Microsoft. I help others with the software virtually. I’m going to give it another try now using your method.

@CraftingwithDelonda

Жыл бұрын

Awe, thank you so much! I hope this method works for you ❤️

I've watched a couple of your videos, but as soon as I saw the little red hand pointer I had to subscribe!!

@CraftingwithDelonda

6 ай бұрын

😂🤣😂🤣 that made laugh so hard!

Thanks for the great video, Delonda. Your way of feeding the sheets works great. Pure genius. Keep up the great work. I'm 87 years old and learning every day.

@CraftingwithDelonda

Жыл бұрын

Awesome! Thank you!

This has to be the best tutorial/ review I've seen! Thank you!!

@CraftingwithDelonda

Жыл бұрын

Thank you

Thank you for this and all your tutorials. Your my favorite and explain so well. Many blessings to you and your family

@CraftingwithDelonda

Жыл бұрын

Thank you so much 😊

Great explanation! Thank you!

Thank you for the wonderful look into this method of sublimating on cotton! I just started sublimating this weekend and didn't know it was possible to sublimate on cotton. Your project turned out vibrant, loved it!

@CraftingwithDelonda

Жыл бұрын

Glad it was helpful!

@JimSweeneyMMP

Жыл бұрын

Just so it’s clear, this is NOT sublimation on cotton. It’s impossible to sublimate on cotton without a second surface for the sublimation chemical process to bind to.

Definitely subscribed!! I can’t wait to try this!!! Thank you❤

@CraftingwithDelonda

Жыл бұрын

Thanks for subbing and welcome aboard!

Thanks! Your video is full of great advice, and easy to follow!

@CraftingwithDelonda

Жыл бұрын

Thank you!

GREAT tutorial on this. I love how you explain everything so easily. Thank you so much, I've been wanting to try this method!!

@CraftingwithDelonda

Жыл бұрын

Thank you ❤️

This is the best video I've found for doing this. Thank you for taking the time and giving VERY specific details on temps and times. I'll let you know my results 😊

Thank you for the step by step instructions. I just ordered the powder and film from the links you listed. So excited to get started. If I could like the tutorial a thousand times I would.

@CraftingwithDelonda

Жыл бұрын

Awe! Thank you so much ❤️

Thank goodness I found your channel! This is the best video I’ve watched about doing this.

@CraftingwithDelonda

8 ай бұрын

Awesome! Thank you!

I thought I would want to just skip to the process as a lot of people ramble in vain but I literally was glued from beginning to end. You’ve definitely got a new subscriber ❤

@CraftingwithDelonda

Жыл бұрын

Thank you so much ❤️

Love this! Very helpful to see it done. I see another user mentioned a second press and I was thinking that without ever having tried this. Thanks for the tutorial. Also, love your positive vibe.

@CraftingwithDelonda

Жыл бұрын

You are so welcome! I did this process with a family photo and I didn't do a second press that time either. I don't think the 2nd press is necessary.

@MrsMoniLB

Жыл бұрын

@@CraftingwithDelonda Good to know. That helps keep things simple. Can’t wait to try it!

Thank you so much for showing this. I love sublimation, but like you I don't always want to wear white. I think I'm going to have to try this. I love the step-by-step tutorials! Again Thank you so much!

@CraftingwithDelonda

Жыл бұрын

Thank you so much

I love this!! Thank you so much, such a great teacher ❤

@CraftingwithDelonda

Жыл бұрын

Thank you ☺️

Thank you so much for doing this tutorial. I've been running all over KZread watching hours of videos and you have been right here for seven months. I've placed my order for the items I didn't have a can't wait to make my first sublimation DTF shirt. Much continued success to you and your channel. I hit the subscribe so that I can come back to watch more to expand my knowledge.

@CraftingwithDelonda

Жыл бұрын

Awe, thank you so much. I’m glad you found it helpful.

Awesome!! Great teacher! This will be My preferred method because of the look and feel! No stiff decal feeling on the shirt! Thank you for this video!!!!

@CraftingwithDelonda

Жыл бұрын

You are so welcome!

Good day Ms. D, I did not skip the intro! lol. Thank you so much. Thank you for sharing your time, talent and spirit! Peace and Blessings.

@CraftingwithDelonda

Жыл бұрын

🤣🤣🤣 thanks for watching it all the way through! Sometimes people skip the intro and that’s where some of the questions are answered.

This video is my go to video when I use dtf everytime. Thanks

Had no idea these products exist! Thank you Ma’am!

@CraftingwithDelonda

Жыл бұрын

You're very welcome

I loved this tutorial! I'm definitely trying this soon Thank you 😊

@CraftingwithDelonda

Жыл бұрын

Thank you!

Excellent tutorial. My wife and I are just getting into submlimation and this video was extremely helpful.

This was a great video! I’m so excited to try this technique!

@CraftingwithDelonda

Жыл бұрын

Yay! Thank you!

The kids comment CRACKED me up! It’s so true. Thanks so much for this video as well as all your other videos. I learn so much from you!

@annaphelps7775

Жыл бұрын

That was meant to read LID, not kids. 🙄😆

@CraftingwithDelonda

Жыл бұрын

You are so welcome!

You are beyond awesome I’ve been so curious about this process! Now I know and can’t wait to try! Thank you 👍🏼

@CraftingwithDelonda

Жыл бұрын

Thank you so much!

THANK YOU!!!!!! Absolutely love your tutorials.

@CraftingwithDelonda

Жыл бұрын

You are so welcome!

THANK YOU for addressing that annoying flashing light I have worried for a month now that I got a bad one., and have been unplugging it. You just gave me the green light that mine is safe to use.

@CraftingwithDelonda

Жыл бұрын

Yes!

Thank you! Watching your video was the first time I fully understood this method!

@CraftingwithDelonda

Жыл бұрын

Glad it helped!

This video may have cleared up every concern I had about sublimation on T shirts (or other shirts), as I specifically do NOT want to be limited to white, or even light colored shirts, nor do I want to be tied to certain types of material. One "production" comment here: When you are off-camera, the volume of your voice drops drastically. I'm sure it's an easy fix, just needed to make you aware of it. You present your information very well and clearly enough for a beginner to follow and understand. Thanks to the Army, I have massive hearing loss and that was the only problem I had getting through this video.

@CraftingwithDelonda

Жыл бұрын

This is the exact kind of feedback that I need. I will definitely try to be more aware of the volume of my voice and pay more attention to how the sound fluctuates during the process. Thank you so much.

Thanks for instructions that were very clear and concise. I am no longer afraid to try this process. I’m new to the sublimation and have a small space in a shop to sell items. Cotton tshirts are now on the list. Better value and no more vinyl unless requested.🎉

@CraftingwithDelonda

5 ай бұрын

Thank you ❤️

You are the best!!!!! You are so good at explaining and teaching. God bless you!

@CraftingwithDelonda

9 ай бұрын

Thank you so much ❤️

I just tried this technique because of YOU and I LOVE IT!! It turned out AMAZING!!! THANK YOU THANK YOU THANK YOU!! Been dying to sublimate on Cotton and this worked BRILLIANTLY!! Now I'm just curious how it looks after washing.😄

@CraftingwithDelonda

Жыл бұрын

It turned out amazing because of you! I’m sharing your excitement because I know the feeling. Here is my wash update SUBLIMATION WITH DTF POWDER WASH UPDATE kzread.info/dash/bejne/i4qetMltpZq2YMY.html

Thank you for your honesty in pricing and your preferred methods.

@CraftingwithDelonda

Жыл бұрын

You are so welcome!

Hi Delonda, I watched two of your videos and I really like the way you explain what you are doing CLEAR and REAL. Thanks so much

@CraftingwithDelonda

Жыл бұрын

Thank you so much 💓