First video of 2 showing basic install of Sambar engine
Жүктеу.....
Пікірлер: 20
@BigKandRtv2 ай бұрын
It's surprising how the engine/trans can so easily be installed as a unit. Good stuff!
@turnbullgarage88
2 ай бұрын
True, I’ve done a few and can get it swapped pretty quick.
@Rick-hp6fu7 ай бұрын
Love your videos. You have a new sub. I've done my own work on my cars since my dad taught me as a kid and pulled my fair share of engines out of my cars back when I was younger. Watching you rebuild this engine and drop (lift) it back in has me longing for doing a rebuild. Looking forward to the rest of your content!
@turnbullgarage88
7 ай бұрын
Thanks for that! Hope you are enjoying my latest project.
@robertelmo7736 Жыл бұрын
Good info thanks for making this video.
@turnbullgarage88
Жыл бұрын
No prob!
@juangarza9047 Жыл бұрын
Good job and good info thanks
@audielebarios2418 Жыл бұрын
Kind'a like Sambar now but spare parts availability & does this need experts on Subaru. Or, general can?
@turnbullgarage88
Жыл бұрын
Super basic mechanics, any mechanic can work on these but for some reason many won’t. Parts are available but it they are expensive and it takes time to get them.
@Thunderroad85174 ай бұрын
Where would you find a labor time on just the clutch or rear main seal ? It’s not in prodemand. Thanks in advance?
@turnbullgarage88
4 ай бұрын
No idea. I would say 5-6 hours would do it.
@dylanschaefer97992 ай бұрын
I’m trying to remove the axel on my 93 KS4. But need some help. Do you have anywhere I can DM you to get a better idea on how to take it off so I can get to the oil pan?
@turnbullgarage88
2 ай бұрын
I’m not sure you need to remove the axle to remove the oil pan. Been awhile though. Does it have the pins or internal circlips holding the axle? You will have to remove the upper shock bolt to get the lower control arm to go low enough to slide axle out. Support lower control arm with jack when you remove that bolt.
@dylanschaefer9799
2 ай бұрын
@@turnbullgarage88 I’m not really sure how to tell if it has pins or the internal circlips. I took a picture of it, but can’t send it here
@turnbullgarage88
2 ай бұрын
@@dylanschaefer9799 Email it to me. Turnbullgarage88@gmail.com
@Obs.society Жыл бұрын
Do you know where I can buy a engine for the Sambar ?
@turnbullgarage88
Жыл бұрын
You could try G&R Imports, not cheap though. Best is to just search online. It can be a challenge for sure. Good luck.
@Obs.society
Жыл бұрын
@@turnbullgarage88 thank you 🙏🏾
@malik935shahid
11 ай бұрын
You can buy a samber truck from Japan on the price of engine. We are exporting world wide 😊
Пікірлер: 20
It's surprising how the engine/trans can so easily be installed as a unit. Good stuff!
@turnbullgarage88
2 ай бұрын
True, I’ve done a few and can get it swapped pretty quick.
Love your videos. You have a new sub. I've done my own work on my cars since my dad taught me as a kid and pulled my fair share of engines out of my cars back when I was younger. Watching you rebuild this engine and drop (lift) it back in has me longing for doing a rebuild. Looking forward to the rest of your content!
@turnbullgarage88
7 ай бұрын
Thanks for that! Hope you are enjoying my latest project.
Good info thanks for making this video.
@turnbullgarage88
Жыл бұрын
No prob!
Good job and good info thanks
Kind'a like Sambar now but spare parts availability & does this need experts on Subaru. Or, general can?
@turnbullgarage88
Жыл бұрын
Super basic mechanics, any mechanic can work on these but for some reason many won’t. Parts are available but it they are expensive and it takes time to get them.
Where would you find a labor time on just the clutch or rear main seal ? It’s not in prodemand. Thanks in advance?
@turnbullgarage88
4 ай бұрын
No idea. I would say 5-6 hours would do it.
I’m trying to remove the axel on my 93 KS4. But need some help. Do you have anywhere I can DM you to get a better idea on how to take it off so I can get to the oil pan?
@turnbullgarage88
2 ай бұрын
I’m not sure you need to remove the axle to remove the oil pan. Been awhile though. Does it have the pins or internal circlips holding the axle? You will have to remove the upper shock bolt to get the lower control arm to go low enough to slide axle out. Support lower control arm with jack when you remove that bolt.
@dylanschaefer9799
2 ай бұрын
@@turnbullgarage88 I’m not really sure how to tell if it has pins or the internal circlips. I took a picture of it, but can’t send it here
@turnbullgarage88
2 ай бұрын
@@dylanschaefer9799 Email it to me. Turnbullgarage88@gmail.com
Do you know where I can buy a engine for the Sambar ?
@turnbullgarage88
Жыл бұрын
You could try G&R Imports, not cheap though. Best is to just search online. It can be a challenge for sure. Good luck.
@Obs.society
Жыл бұрын
@@turnbullgarage88 thank you 🙏🏾
@malik935shahid
11 ай бұрын
You can buy a samber truck from Japan on the price of engine. We are exporting world wide 😊
🎉