In todays video strip @goonzquad s2000. Were going to swap all the internals from the parts car into the E30. Stay Tuned! Instagram: motorhead.c...
Жүктеу.....
Пікірлер: 121
@frankportigiano19102 жыл бұрын
Loving that you guys are back in this Build. It may have taken a while but I'm confident you guys will get it done soon
@deanwharepapa85612 жыл бұрын
Nice Mark, great start on the engine transplant, Vlad funny as at the store😂
@tonyc92602 жыл бұрын
As always mark and vlad your work speaks for itself, great video and awesome content 👏 👌 👍 thanks 😊
@Mtech_garage
2 жыл бұрын
Glad you enjoyed :)
@philtucker12242 жыл бұрын
Once the cams have come up clean, these cams can be polished using a floor standing rotary buffing wheel to remove any slight pitting.
@nathansee51042 жыл бұрын
For easy cheap rust removal soak the rusted parts in regular white vinegar for 2 days....then clean off. Works wonders. 💪
@MIKEH.7772 жыл бұрын
You guys are doing a great job, you stripped that wrecked car quick. I'm loving the videos keep up the great work & God Bless you guys and your families.
@sevendaystoheavensevendays40772 жыл бұрын
Looking very nice! Thank you for taking us along on your adventure 👍🏼
@rjauto72152 жыл бұрын
Mark you don't know how long I've waited for you to work on that car I love the E30s I had my first one in 1995 lol anyway great video as usual guys 🙏🙏🙏👍👍
@jz99852 жыл бұрын
Good to see you have a goal for this car which given your talents it will happen. Joe
@paulgunter15382 жыл бұрын
Great work Mark and Vlad. Mark can disassemble a S2000 in his sleep by now, lol. The E30M3 will be the jewel of your channel when it is done, can't wait ! Happy Easter boys !
@bryduhbikeguy2 жыл бұрын
Glad the cams cleaned right up.YT sensors may not have let you show a full head-job.
@genuinegasti2 жыл бұрын
awesome guys!!!! thrilled to see the beemer back!
@Mtech_garage
2 жыл бұрын
Me too 😁
@heathermaya36332 жыл бұрын
That’s some solid work on the E30 (you guys never cease to impress). So excited to see your progress on this 😎 👍
@davecourtois51422 жыл бұрын
Keep going you are almost there, congratulation. I really like your channel, you and all your brother are very good car builder.
@mfl9502 жыл бұрын
A really interesting project , worth subscribing for , great work so far
@angelmorales2202 жыл бұрын
Can't wait to see it done.
@wookiewookster12142 жыл бұрын
Great video once again Mark and Vlad 🇬🇧
@daveoleary58222 жыл бұрын
2010 lickma lol nearly choked on my lunch 😂😂
@tomswindler642 жыл бұрын
As always you are killing it on the content.remember trial and error is the only way you can guarantee that is what you want.keep it up.kudos.👍👍👍😎😎😎
@danielvanegas19862 жыл бұрын
Finally! Good luck with the car! You can also think of a k20c1 engine as well, it would be interesting in that chassis.
@aloy19202 жыл бұрын
The legend is back 🔥
@SatalinTinieblas2 жыл бұрын
Hi mark, this engine is the one that was in limp mode, dont remember if they replaced the cams but check out that, and the harness sensors too
@marksaunders25002 жыл бұрын
Hi from uk guys👋👍 personal projects always blow our pockets up guys 😂 lol and great job getting back on the bmw👍 bit by bit you'll get there guys 👍 and I think anthony at o reillys is great guy so funny and always happy to help out cant wait to see how you get on next on bmw , thanks for your time and be safe see you soon guys👍👋
@jonsmith64962 жыл бұрын
Looking good!
@MrHuismeester2 жыл бұрын
Hope for the best that this engine will give the Power for this BMW !!!! And a nice video Boys !
@tommyknightly16592 жыл бұрын
Great videos, urself, 23rd garage and v tuned r my fav videos on KZread
@alanpaulick78152 жыл бұрын
First well done shop is nice and clean. BMW is taking shape slowly but Mark you a hard worker so we will follow this build to the end. Your brother is very handy as well so you guys make a great team. Peace ✌
@Mtech_garage
2 жыл бұрын
Thanks!
@markhill95642 жыл бұрын
challenging job hope the engine is ok like you said this doesnt pay the bills i will keep watching for updates
@peterjewell94362 жыл бұрын
Hey guys those cams will probity need a regrind and rehardening if they can I'd flush the top of the engine with diesel and then flush it with a high zinc diesel oil then refill with the right grade oil also check the rollers on rockers for rust and pitting if any replace those as well can't wait to see this thing finished
@Mtech_garage
2 жыл бұрын
Thanks! Will do
@markkennedy40552 жыл бұрын
You now have an M2000, nice!
@Mtech_garage
2 жыл бұрын
😂😂😂
@Matt-cx1nf2 жыл бұрын
Been waiting for this mark happy days ✌
@NTromb2 жыл бұрын
Definitely sick I know a lot of people will not agree with me but we got an engine like that a while ago we used a little bit of rest is over we rinsed it off with water and while we were doing that we used a is either green or gray scotch bright just to get rid of any rust and it worked phenomenal then after to deviate from flash rust we just saturated it in engine oil
@AgSherr2 жыл бұрын
Great stuff! Hope you use that ID4MOTION Cluster for a S2k. I've been wanting to see that done. What was that Rust Spray you used? It worked pretty well from what I saw here and the Spray Can makes it multi-purpose but, it's hard to trust a product off of the shelf sight unseen.
@bobmanzi77122 жыл бұрын
great stuff thanks
@Koebi.S2 жыл бұрын
Yeah...great....I've been really waiting a damn long time for the e30🔝🆒️👌🏼🤙🏼
@elmonteslim37112 жыл бұрын
Yep...the cams will need to be linished as the lobes will have tiny pits. Good progress.
@qwentenplante99542 жыл бұрын
I like this, way too much activity for a change, Vlad is a little STUD boy.
@pitagriffen13942 жыл бұрын
Good work guys!!👍now's the time to pop that motor back out before you lay the harnesses in to take care of the motor compartment,car is gonna be cool!! I like it!!🇺🇸💪👍✌🍩
@ericmiller20812 жыл бұрын
You have a great project there and I love to support your channel. I’m kinda worried that those cams will cause damage to the motor, perhaps it would be a good insurance to get new ones. Hope it all comes together for you.
@cuttaill2 жыл бұрын
Very cool
@marquisethomas56112 жыл бұрын
Ayo Anthony valid 🤣🤣
@jaccoonderdijk17772 жыл бұрын
"Rust prevention stuff" .... Uhh too little too late? 🤔
@FlyEaglesFly191112 жыл бұрын
Man that silver one took quite a lick. Sure hope nobody had been on that side. Smart move to take all you can from it. Left Pigeon Forge yesterday and had a 14hr drive back home. Stay safe and be well. Slava Ukraini
@dom72152 жыл бұрын
What is with the Break boster ??? Maby you can have ABS ! Always good to See you working !
@shanemontaque57592 жыл бұрын
Don't use the stock wiring, u will be adding back a lot of unnecessary weight to the car as well as issues with sensors. Use a standalone they will allow connection to s2000 dash so everything will still appear stock with way more flexibility.
@marc54602 жыл бұрын
tnx for the video
@josiah70682 жыл бұрын
I like the thought of modern with old school look ..I have the same idea for a few of my cars … but not disassembling THAT engine with the amount of rust in it will be a Honda Mitsubishi mistake … spend the time and money so you don’t have a engine that spins the bearings and clogs the lifters with micro rust sitting in corners of the engine you didn’t thoroughly clean … good luck fellas
@bryduhbikeguy2 жыл бұрын
BTW.For an easier way to get instant power,"Goofybuilt Shane" just did work on a Supercharger that bolts on the front of those engines with Allot less hassles.May want to look at his video for the heck of it.All day,everyday he builds,and rebuilds engines mostly.Plus some pretty badass cars for drag racing.
@xJeanplef2 жыл бұрын
I really wanna see the hardtop's repair
@Berti_002 жыл бұрын
Tell Vlad to keep an eye on that tool box lmaooo. Brrrr
@Cchandler47042 жыл бұрын
If the putting is minor just send it. It will be fine. Can’t wait to see it rollin!
@zjldmd2 жыл бұрын
Lickma …. Lmao
@Riyazatron2 жыл бұрын
Do a full engine rebuild with up rated parts for when you turbo it. You'll know that way when you do turbo it, you can safely handle the power
@Rmegaxx2 жыл бұрын
Fix the hardtop🎊
@Mtech_garage
2 жыл бұрын
Bet 👀
@adamosborne40532 жыл бұрын
Good 2 c u back on the bmw
@genuinegasti2 жыл бұрын
I believe this is the engine goonzsquad discarded as it was spitting coolant fluid thru the exhaust, they were considering to rebuild it but got a low mileage parts car instead (the one you got from them) and swapped the engines.
@Mtech_garage
2 жыл бұрын
No this motor ran and came from the 65k mile parts car I believe that motor is the original one from their car
@powerpeugeot335
2 жыл бұрын
goonzquad replaced the cylinder head gasket with their original engine. (is it the engine in the vtuned workshop?) The engine of this first spare car was a different model year and did not work properly. They tried to swap the camshafts with their original engine. But didn't make it work properly. Eventually, the goonzquad bought a red car (it’s an vtuned project) and replaced its engine with in their car
@Mtech_garage
2 жыл бұрын
@@powerpeugeot335 yes this is the engine that wasn’t the correct year. They just didn’t torque the cams back in
@Tyreakmcgregor2 жыл бұрын
Me and everyone else were patiently waiting
@jannybravo84292 жыл бұрын
Finally
@steven9072 жыл бұрын
Great video boys
@mc-hanzis42032 жыл бұрын
Why drive it in the paint booth? Is it not easier and paint everything first
@pmiller78862 жыл бұрын
clean work area always makes your project vision clear...I can't stand a cluttered dirty work/job area...😊
@waseemalaziz9502 жыл бұрын
nice video really awesome but there is one Q why you installing Honda Motor I think you can find BMW full power performance Motor !!
@omaraltaani95102 жыл бұрын
Hello. I have a question about the engine flickering when stepping on the accelerator pedal and then it stabilizes when the rpm rises... and another problem is the engine flickering at (2000 - 3000 revolutions), then it vanishes, of course, and the car is parked The engine is m50b20. It uses e30
@TommyAlanRaines2 жыл бұрын
Been wondering when you guys would get back to the E30M3, looking forward to seeing more on it! You guys also have one heck of sense of humor hahahahaha.
@M1LAD812 жыл бұрын
We call that a Crane. Cherry picker is something completely different. But good work.
@aymenhaha2 жыл бұрын
and the ABS?
@GspotPredator2 жыл бұрын
Back to him normal self vlad!
@50Stunt450r2 жыл бұрын
Can I get that third brake light 😂
@vladbossd87912 жыл бұрын
What music did you play in the background
@henrymoghadas79972 жыл бұрын
I remember they had issues with s2000 engine that they was building they changed 2 or 3 engine finally they got they S2000 ran so check that engine before you install it
@bowieskeeter21262 жыл бұрын
is the word "tooken" something that is used in the south? ive never heard of this word until i started to watch these car building chans on you tube and they are all from like tenn, carolinas, georgia
@christopher7282 жыл бұрын
Yo buddy i think u got the short end of the stick on this deal
@Mtech_garage
2 жыл бұрын
How? I paid 1000 for the car and already sold 1500 in parts 😂 this motor is 6k on eBay
@wilfredocaban98862 жыл бұрын
One of the Goonsquad S2000 motor was bad something with the heads or ECU
@Mtech_garage
2 жыл бұрын
Yea I believe it was their first motor
@naturalsr4052 жыл бұрын
Are you gonna be using ap2 steering wheel?
@Mtech_garage
2 жыл бұрын
No I have a mtech steering wheel from azautowheel
@naturalsr405
2 жыл бұрын
@@Mtech_garage selling?
@Mtech_garage
2 жыл бұрын
@@naturalsr405 yes what’s ur offer?
@McGruff20082 жыл бұрын
A plastic tub and some Evapo-Rust. You don't have to do anything else.
@christopher7282 жыл бұрын
Yo bro i waz jus messing wit cha cuz the car was so banged up n trust me i knows how rich parts kin get n i not one ah ya hater’s fellas I’m the opposite I’m a huge fan n sorry if ya took my comment as someone hating on ya that’s not how it was intended Much respect from a huge fan of your whole family
@Mtech_garage
2 жыл бұрын
All love brother never took it as hate 🙏🏻
@sttm12832 жыл бұрын
not to be picky but a s2000 motor in a e30? if not the original engine(or any other bmw motor) LS would be the way. please enlighten me what im missing.
@Mtech_garage
2 жыл бұрын
It’s as close to the e30 m3’s s14 I’ll get without paying 15k for an s14 😅 not to mention forged internals from the factory and it held highest hp per liter until the Ferrari 458 was released….
@acedaugdaug8382 жыл бұрын
Subscriber here.....
@jalalelmerhebi66152 жыл бұрын
Is this the same bmw that Ben was working on it
@Mtech_garage
2 жыл бұрын
No
@akashshetty94932 жыл бұрын
what happened to vtuned e30?
@Mtech_garage
2 жыл бұрын
He gave up on it 😅
@OnkelPHMagee
2 жыл бұрын
@@Mtech_garage Did he cut out the firewall before giving up?
@wheelies25392 жыл бұрын
🤣🤣
@dunnrite82992 жыл бұрын
No editing when u cleaning it cause people gone think u did something else to get the rust off a heads up 👍🏿💯
@jmdjasonday2 жыл бұрын
If the tops a worth a bit, then definately fix it. If not, piff it.
@Last_Man_Standing_772 жыл бұрын
ну вы и замутили проект-0)
@SuperTomcatUk2 жыл бұрын
Just check their video on this engine, they stripped it replaced the head gasket and it blew same day again... thats why everything is lose......
@Mtech_garage
2 жыл бұрын
Wrong motor. That’s from their original car
@basscomander63482 жыл бұрын
Comment
@bryduhbikeguy
2 жыл бұрын
I think the car's going Rock !
@yuuki6032 жыл бұрын
We want a video on how to repair the hard top . I will enjoy watching it repair ⭐
@adventurousairman2 жыл бұрын
Taken not tooken 😉
@SuperTomcatUk2 жыл бұрын
That engine blew a head gasket.. you need to have the head skimmed before you put it together.... Just a new head gasket wont do it as you know.....
@davidg20732 жыл бұрын
The E38 "Bondomobile" gets even sketchier. No need to worry about changing out the door time would be better spent sourcing a chocolate gearstick and some wooden wheels.
@cyberhornthedragon2 жыл бұрын
dont fix it make a T top for your s2 do something custom outa it
@MrDralibaba2 жыл бұрын
no way its not a BMW M3 Engine in the car !!!
@rickbareman22632 жыл бұрын
Progress is being made that Honda motor is not going to. Know how to behave in a BMW chassis looking thought.👍
@merrelvoorburg81672 жыл бұрын
Guys that engine is bad. Goonsquad replace the head gasket but did not flat head. P!ease check that
@grumpyjuicetrucking2 жыл бұрын
that motor is trash. they swapped parts of two different still motors. they then bought a car with a good motor
Пікірлер: 121
Loving that you guys are back in this Build. It may have taken a while but I'm confident you guys will get it done soon
Nice Mark, great start on the engine transplant, Vlad funny as at the store😂
As always mark and vlad your work speaks for itself, great video and awesome content 👏 👌 👍 thanks 😊
@Mtech_garage
2 жыл бұрын
Glad you enjoyed :)
Once the cams have come up clean, these cams can be polished using a floor standing rotary buffing wheel to remove any slight pitting.
For easy cheap rust removal soak the rusted parts in regular white vinegar for 2 days....then clean off. Works wonders. 💪
You guys are doing a great job, you stripped that wrecked car quick. I'm loving the videos keep up the great work & God Bless you guys and your families.
Looking very nice! Thank you for taking us along on your adventure 👍🏼
Mark you don't know how long I've waited for you to work on that car I love the E30s I had my first one in 1995 lol anyway great video as usual guys 🙏🙏🙏👍👍
Good to see you have a goal for this car which given your talents it will happen. Joe
Great work Mark and Vlad. Mark can disassemble a S2000 in his sleep by now, lol. The E30M3 will be the jewel of your channel when it is done, can't wait ! Happy Easter boys !
Glad the cams cleaned right up.YT sensors may not have let you show a full head-job.
awesome guys!!!! thrilled to see the beemer back!
@Mtech_garage
2 жыл бұрын
Me too 😁
That’s some solid work on the E30 (you guys never cease to impress). So excited to see your progress on this 😎 👍
Keep going you are almost there, congratulation. I really like your channel, you and all your brother are very good car builder.
A really interesting project , worth subscribing for , great work so far
Can't wait to see it done.
Great video once again Mark and Vlad 🇬🇧
2010 lickma lol nearly choked on my lunch 😂😂
As always you are killing it on the content.remember trial and error is the only way you can guarantee that is what you want.keep it up.kudos.👍👍👍😎😎😎
Finally! Good luck with the car! You can also think of a k20c1 engine as well, it would be interesting in that chassis.
The legend is back 🔥
Hi mark, this engine is the one that was in limp mode, dont remember if they replaced the cams but check out that, and the harness sensors too
Hi from uk guys👋👍 personal projects always blow our pockets up guys 😂 lol and great job getting back on the bmw👍 bit by bit you'll get there guys 👍 and I think anthony at o reillys is great guy so funny and always happy to help out cant wait to see how you get on next on bmw , thanks for your time and be safe see you soon guys👍👋
Looking good!
Hope for the best that this engine will give the Power for this BMW !!!! And a nice video Boys !
Great videos, urself, 23rd garage and v tuned r my fav videos on KZread
First well done shop is nice and clean. BMW is taking shape slowly but Mark you a hard worker so we will follow this build to the end. Your brother is very handy as well so you guys make a great team. Peace ✌
@Mtech_garage
2 жыл бұрын
Thanks!
challenging job hope the engine is ok like you said this doesnt pay the bills i will keep watching for updates
Hey guys those cams will probity need a regrind and rehardening if they can I'd flush the top of the engine with diesel and then flush it with a high zinc diesel oil then refill with the right grade oil also check the rollers on rockers for rust and pitting if any replace those as well can't wait to see this thing finished
@Mtech_garage
2 жыл бұрын
Thanks! Will do
You now have an M2000, nice!
@Mtech_garage
2 жыл бұрын
😂😂😂
Been waiting for this mark happy days ✌
Definitely sick I know a lot of people will not agree with me but we got an engine like that a while ago we used a little bit of rest is over we rinsed it off with water and while we were doing that we used a is either green or gray scotch bright just to get rid of any rust and it worked phenomenal then after to deviate from flash rust we just saturated it in engine oil
Great stuff! Hope you use that ID4MOTION Cluster for a S2k. I've been wanting to see that done. What was that Rust Spray you used? It worked pretty well from what I saw here and the Spray Can makes it multi-purpose but, it's hard to trust a product off of the shelf sight unseen.
great stuff thanks
Yeah...great....I've been really waiting a damn long time for the e30🔝🆒️👌🏼🤙🏼
Yep...the cams will need to be linished as the lobes will have tiny pits. Good progress.
I like this, way too much activity for a change, Vlad is a little STUD boy.
Good work guys!!👍now's the time to pop that motor back out before you lay the harnesses in to take care of the motor compartment,car is gonna be cool!! I like it!!🇺🇸💪👍✌🍩
You have a great project there and I love to support your channel. I’m kinda worried that those cams will cause damage to the motor, perhaps it would be a good insurance to get new ones. Hope it all comes together for you.
Very cool
Ayo Anthony valid 🤣🤣
"Rust prevention stuff" .... Uhh too little too late? 🤔
Man that silver one took quite a lick. Sure hope nobody had been on that side. Smart move to take all you can from it. Left Pigeon Forge yesterday and had a 14hr drive back home. Stay safe and be well. Slava Ukraini
What is with the Break boster ??? Maby you can have ABS ! Always good to See you working !
Don't use the stock wiring, u will be adding back a lot of unnecessary weight to the car as well as issues with sensors. Use a standalone they will allow connection to s2000 dash so everything will still appear stock with way more flexibility.
tnx for the video
I like the thought of modern with old school look ..I have the same idea for a few of my cars … but not disassembling THAT engine with the amount of rust in it will be a Honda Mitsubishi mistake … spend the time and money so you don’t have a engine that spins the bearings and clogs the lifters with micro rust sitting in corners of the engine you didn’t thoroughly clean … good luck fellas
BTW.For an easier way to get instant power,"Goofybuilt Shane" just did work on a Supercharger that bolts on the front of those engines with Allot less hassles.May want to look at his video for the heck of it.All day,everyday he builds,and rebuilds engines mostly.Plus some pretty badass cars for drag racing.
I really wanna see the hardtop's repair
Tell Vlad to keep an eye on that tool box lmaooo. Brrrr
If the putting is minor just send it. It will be fine. Can’t wait to see it rollin!
Lickma …. Lmao
Do a full engine rebuild with up rated parts for when you turbo it. You'll know that way when you do turbo it, you can safely handle the power
Fix the hardtop🎊
@Mtech_garage
2 жыл бұрын
Bet 👀
Good 2 c u back on the bmw
I believe this is the engine goonzsquad discarded as it was spitting coolant fluid thru the exhaust, they were considering to rebuild it but got a low mileage parts car instead (the one you got from them) and swapped the engines.
@Mtech_garage
2 жыл бұрын
No this motor ran and came from the 65k mile parts car I believe that motor is the original one from their car
@powerpeugeot335
2 жыл бұрын
goonzquad replaced the cylinder head gasket with their original engine. (is it the engine in the vtuned workshop?) The engine of this first spare car was a different model year and did not work properly. They tried to swap the camshafts with their original engine. But didn't make it work properly. Eventually, the goonzquad bought a red car (it’s an vtuned project) and replaced its engine with in their car
@Mtech_garage
2 жыл бұрын
@@powerpeugeot335 yes this is the engine that wasn’t the correct year. They just didn’t torque the cams back in
Me and everyone else were patiently waiting
Finally
Great video boys
Why drive it in the paint booth? Is it not easier and paint everything first
clean work area always makes your project vision clear...I can't stand a cluttered dirty work/job area...😊
nice video really awesome but there is one Q why you installing Honda Motor I think you can find BMW full power performance Motor !!
Hello. I have a question about the engine flickering when stepping on the accelerator pedal and then it stabilizes when the rpm rises... and another problem is the engine flickering at (2000 - 3000 revolutions), then it vanishes, of course, and the car is parked The engine is m50b20. It uses e30
Been wondering when you guys would get back to the E30M3, looking forward to seeing more on it! You guys also have one heck of sense of humor hahahahaha.
We call that a Crane. Cherry picker is something completely different. But good work.
and the ABS?
Back to him normal self vlad!
Can I get that third brake light 😂
What music did you play in the background
I remember they had issues with s2000 engine that they was building they changed 2 or 3 engine finally they got they S2000 ran so check that engine before you install it
is the word "tooken" something that is used in the south? ive never heard of this word until i started to watch these car building chans on you tube and they are all from like tenn, carolinas, georgia
Yo buddy i think u got the short end of the stick on this deal
@Mtech_garage
2 жыл бұрын
How? I paid 1000 for the car and already sold 1500 in parts 😂 this motor is 6k on eBay
One of the Goonsquad S2000 motor was bad something with the heads or ECU
@Mtech_garage
2 жыл бұрын
Yea I believe it was their first motor
Are you gonna be using ap2 steering wheel?
@Mtech_garage
2 жыл бұрын
No I have a mtech steering wheel from azautowheel
@naturalsr405
2 жыл бұрын
@@Mtech_garage selling?
@Mtech_garage
2 жыл бұрын
@@naturalsr405 yes what’s ur offer?
A plastic tub and some Evapo-Rust. You don't have to do anything else.
Yo bro i waz jus messing wit cha cuz the car was so banged up n trust me i knows how rich parts kin get n i not one ah ya hater’s fellas I’m the opposite I’m a huge fan n sorry if ya took my comment as someone hating on ya that’s not how it was intended Much respect from a huge fan of your whole family
@Mtech_garage
2 жыл бұрын
All love brother never took it as hate 🙏🏻
not to be picky but a s2000 motor in a e30? if not the original engine(or any other bmw motor) LS would be the way. please enlighten me what im missing.
@Mtech_garage
2 жыл бұрын
It’s as close to the e30 m3’s s14 I’ll get without paying 15k for an s14 😅 not to mention forged internals from the factory and it held highest hp per liter until the Ferrari 458 was released….
Subscriber here.....
Is this the same bmw that Ben was working on it
@Mtech_garage
2 жыл бұрын
No
what happened to vtuned e30?
@Mtech_garage
2 жыл бұрын
He gave up on it 😅
@OnkelPHMagee
2 жыл бұрын
@@Mtech_garage Did he cut out the firewall before giving up?
🤣🤣
No editing when u cleaning it cause people gone think u did something else to get the rust off a heads up 👍🏿💯
If the tops a worth a bit, then definately fix it. If not, piff it.
ну вы и замутили проект-0)
Just check their video on this engine, they stripped it replaced the head gasket and it blew same day again... thats why everything is lose......
@Mtech_garage
2 жыл бұрын
Wrong motor. That’s from their original car
Comment
@bryduhbikeguy
2 жыл бұрын
I think the car's going Rock !
We want a video on how to repair the hard top . I will enjoy watching it repair ⭐
Taken not tooken 😉
That engine blew a head gasket.. you need to have the head skimmed before you put it together.... Just a new head gasket wont do it as you know.....
The E38 "Bondomobile" gets even sketchier. No need to worry about changing out the door time would be better spent sourcing a chocolate gearstick and some wooden wheels.
dont fix it make a T top for your s2 do something custom outa it
no way its not a BMW M3 Engine in the car !!!
Progress is being made that Honda motor is not going to. Know how to behave in a BMW chassis looking thought.👍
Guys that engine is bad. Goonsquad replace the head gasket but did not flat head. P!ease check that
that motor is trash. they swapped parts of two different still motors. they then bought a car with a good motor