Streetifying An Abused Yamaha R1 | Track Bike to Street Bike EP.3
Автокөліктер мен көлік құралдары
First steps to get my Yamaha R1 track bike back on the road!
📷 SOCIAL
Instagram- / chaos_causes_
TikTok- / chaoscauses
⚙ MY KIT
Insta360 Ace Pro- bit.ly/Ace_Pro_CC
Insta360 X4- bit.ly/Insta360_X4_CC
📧 BUSINESS INQUIRIES- justin@chaoscauses.com
Пікірлер: 249
I don’t want her to get hurt… I don’t know what I’d do without the R1😭😭
@domcxz8643
Ай бұрын
Fo real XDDDDDDDD
@alptunatuncer3017
Ай бұрын
Heard that and came straight to the comment section to find this comment at the very top!
@HennessyBoss
Ай бұрын
😅😅😅😅
@kiranmuraleekrishnan
Ай бұрын
@@alptunatuncer3017 same.!
@WaRn00b85
Ай бұрын
I LOL'd at this too! Hahahaha
I think your assistant did a very good job, supervising you. I hope they get a raise.
Since the bike is already naked, go change the spark plugs and check the valve clearance
@garrison2574
29 күн бұрын
and air filter when the tank comes off for paint
@VexArk
26 күн бұрын
This comment to get wayyyy more likes than it has
This feels like an adult version of Lego set, so satisfying...
@foodsfor_thought
28 күн бұрын
Exactly
I'm always bothered when I see a bike that has been abused and not taken care of. Glad to see you doing this to this bike.
@steve_wilson
24 күн бұрын
I'd love to see the innards, though. Purty on the outside ain't enough if one wants a long term relationship.
Yooo I almost forgot it was Sunday and what that means.. FUNDAY! Starting the morning off right with a little bit of Chaos.
@kitchamph3525
Ай бұрын
What, my Monday is going to start in a couple of hours.
@dirtbikemike2956
Ай бұрын
Rather b welding posts today aswell😊
A man who truly cares about his bike the way that I do. People like us truly deserve super sports. This is because we sincerely care about the quality of the bike. Nice job Bro. 👏👏👏
You’re of the most underrated channels, love the content bro !
What a fantastic surprise to have another video uploaded so soon!!! Loving this build 🤘🤘🤘this R1 is going to look awesome
15:10 she was tapping those bolt into your brand new passenger footpegs... it definitely should NOT be costing any effort to twist them in...
@Jaszczur-sp2tx
Ай бұрын
The bolts may have had threadlocker preapplied. Those can be a bit hard to install.
@wildwilco
Ай бұрын
@@Jaszczur-sp2tx threadlocker is a liquid which you barely notice. It hardens after a couple minute/hours depending on the type. Unless some cheap paste-like threadlocker was used, which I don't expect since he's paying top money for tye rest of the bike
@Bob489
Ай бұрын
Probably slightly twisted threads. I've had this issue with alot of bolts on my bike because the previous owner tightened EVERYTHING too much. Usually just straighten then out with a thread-making-thingy-rod (Sorry, english isn'y my first language) but doing it with a bolt can work just as well. :)
@johnnyblue4799
28 күн бұрын
@@wildwilco There are bolts coming new with threadlocker pre-applied and it's not liquid anymore when you get them.
Waki waki cc uploaded
Funny how the first thing I do before I even watch CC videos I drop a 👍🏾 and I never regret it because he always delivers... #KeepRockingMyDude...#YouMakeSouthAfricaProud😂❤🇿🇦...
this build gonna be amazing 😂🤙
8:16 putting stand felt awesome never before this😂
I love the precision in your work. Sure it is gonna be a good wakening the spirits in their factory shape. Keep going bro it will pay you back.
I felt physically sad when the episode ended. Such a rad project man! Keep up the hard work!
Brilliant series man!!! The ending will be legendary, and well worth it! Keep on keeping on.
Paint the wheels Light or Dark Grey. You can do something like blue, red, yellow but in my opinion its a basic option. You can do white but in a couple of rides the dust will ruin the color and you will have to clean them every now and then. So i guess a shade of grey would be nice
@tomasslabbert3437
Ай бұрын
A whiter shade of pale, maybe?
@twitchmania7614
Ай бұрын
I think teal would be sick. If it matches the rest of the bike
This is the best series you have made. I am waiting for your next episode. Amazing channel and content!!! All the best!
Looking good so far Bud, you’re doing it the right way, really enjoying your channel and content, keep it up.👍🏻
Loving this build series. Keep up the great work 🤙🏼
Awesome! Keep it rolling. I’ve been waiting for more R1 videos.
Id say either silver, or gold/bronze is my guess for powder coating as all 3 o these would go with its factory colour, have to wait till next vid to find out 👌
That TST tail light is likely blinking fast because the stock relay wasn't swapped. It's a super simple process and makes it easier for people not to ignore your signals if they are flashing too quickly.
Nice job, looking forward to the complete build
Super fun series, I love seeing it come together
i love this series keep it up! great content
I’ve been following you since you only had 1000 subscribers, I always look forward to your videos dude
Paint it……ummmm….KLR green! KLR green! KLR GREEN! Your favourite bike colour!😂
Best surprise on my Sunday ngl
Man im enjoying the R1 series so much, I check your channel if there's a new vid every night, got addicted lol
Your videos are really amazing and very entertaining to watch more r1 content 💪💪
Those lightech levers have a couple of threaded holes underneath for you to screw a little L bracket into, which hit the brake/clutch switches. I just recently ran into this with my project and getting a replacement bracket and bolt was simple here in the UK.
Great update, coming along nicely 👍
THANK YOU FOR SHOWING HOW TO DO IT.THANKKKK YOU. I WAS SO SCARED OF FRONT CAWL. but this video made it look ez
This is a lovely series!
Great progress, really starting to come together 👍
can’t wait to see how this turns up, i managed to save up 8200€ and started looking for a s1000rr but in EU they are HELLA EXPENSIVE then your videos popped up and made me search r1 track bikes just to see them go for more than a stock one lmao , great vids 👌🏼
I really enjoy this R1 progress, you did amazing job man, make the color like r1m
Great job bro, keep going more content!! ✌🏼🔥
As always, amazing video! I do have to ask, did you solder the kickstand switch wire or just use heat shrink?
Looking good! I think the bike would look top notch with wheels that matched the blue/purple on the gas tank!
Keep up the good work man 💪 ❤ Love from San Francisco, California 🇺🇲 🌴 ❤️
Loving this R1 content ❤
Hey man, I've been following your R1 project from the start. I've also got a track R1, but from 2019 and since she got registration im assembling her. Really like your content but there are somethings you can upgrade your bike. One the examples is to annulate the flap system on the air duct. Keep your good work, looking forward to see how your R1 is going to be when its done.
Great video bro 😎 shoutout from the uk 🇬🇧
I love this series...can't wait for the End result....also that assistant need a raise with pets
Who else likes his videos before actually watching them
Very nice build series.
Being a traditionalist, hopefully these wheels will come back Yamaha blue! Great series so far, I can’t wait to see it all come together at the end.
Wheels can be gold or bronze colour, depends on what livery or colour you’re going for! TBH you can’t go wrong with any conventional colour choice! There’s no colour scheme for R1 to look bad! Photographer dream! 🙂
Can’t wait for the next episode
Magnesium colour wheels seems like a no-brainer, and I suppose they wouldn't look bad with the Red and white Haga-era livery I was advocating for on the previous episode ;)
dont have a big bikes yet. but rear sets i learn in the hard way.. the rod nut went loose and i cant shift. fixed with new nut and screw.. then the peg comes loose.. lock tight is the fix. then the small bolts get loose due to vibration then i went back to stock i hope to see on wheel is rough texture dark bronze matte
Can’t wait for the next episode!!
Can't wait for episode 4🔥
Very good episode again, enjoying watching this come together. Whats your cute shop assistants name anyway :D As for the wheels, I'm absolutely with you when it comes to black.. a lighter color gives a much nicer contrast and shows off the intricate details alot better. Color wise, I've always loved the yamaha blue along with white wheels, yet that would be a huge pain to keep clean. Silver works, might get boring over time. Gold or bronze would also be nice.
I don’t know if you skipped showing us purposely but I didn’t see you use blue loctite for the bolts on the rear sets. That is important because the vibration can cause them to loosen
What a purrfect assistant :D
Depending on what color you choose for the bike but I'd go with either red or maybe a lighter blue than stock Yamaha blue for the rims
Looking more and more like a street bike every video! 🔥 Are you going to ride it with your dad? Would make a good video.
black and yellow with some blue will look good
It’s a beauty ❤
hope the wheels won't be as bright as the rim stripe :D either way nice to see some progress on some bike, even if it's not mine... also waiting for parts here ^^
Good progress, I would recommend gold colour for your wheels
If you're taking late breaking guesses on the wheel color, Justin, I'll go with Yammie Yellow. I think you're going to riff on your Dad's R1 since that's what I'd do. How could you not if that's the very bike of your dreams? Love your content - living vicariously since I don't trust myself with that much power. I love making solid lines out of dashed. It's addictive, no matter what racing colors one prefers! 😂
25% off, under 6k on clock, plus content. Is looking like a good deal.
wheels Gold collor is the best :)
Great job!
Yamaha blue color would look great on the rims 💙
I'd suggest you to get the wheels done in neon or just match the fuel tank's colour like the R15 or just keep them black
I'm too young to understand all this but I seem to get it thanks for the information bro❤
Hey, just asking if it got aftermarket ecu or stock. If it's included in your purchase, put stock ecu back in and you should good to go. Stock ecu wouldn't have usb dongle hanging around. And yes you gotta see if it got aftermarket brakepad for operating temperature, o2 sensor (race bike would go with wideband, but if it's wet and stuttering will happen), and foremost license plate! You might have to flush the tank because race bike often use high-percentage ethanol and fill it with premium gas. These is why most people wouldn't buy track bike for street use, too much hassle and you might ended adding more money that you should have. Cheers mate!
15:08 Any bolt is a self tapper if you're determined enough
I’m reworking a speed triple that was left outside in the midwestern USA for 3 years… it’s a nightmare. Seeing how clean this bike is, I’m angry…
Awesome Man 🎉🎉🎉
being a passenger on a R1 must be quite an adventure!😂
Beautiful content
I think you can get the bike painted whole neon while keeping the rims same as they're💚🖤
finally a new episode
With that type of suspension, i wouldnt replace it, maybe take it to get tuned or setup for your weight and partner as a pillion.
Did you get everything OEM or did you ever find any quality aftermarket parts?
Good job dude👍🏻
Looking good 👏
I’m hoping they will be gold. What do you do with old rearsets ? I’m am more than sure that the bike will be blue… 🧐
I been itching for EP 3
Bro I did silver on my cbr1k horrible idea never stayed clean when u apply chain lube it made them black and super hard to wipe off keep the black frfr
hey man, i’ve been wondering, why do you use the dollar sign when you are in south africa?
I'd paint the wheels the same bright yellow colour that the line on the side wall of your new street tires! My 2 cents, cheers mate!
Bro said abused ! Bro that thing is a beast and it wants that only ! TO run on a track so that it can unleash it's inside power and you say abused! 🦁
Wait, didn't you solder the wires before putting heatshrink at 7:20 ? 🤔
Hi. Is there anyway we can get the old cbr 600 review, from way way back🙏🙏? Please respond 🙏
1:28 best cat 🫶
The R1 looks so good without the front panels for some reason
1. Did those wires get solderen? Hehe 2. Might want to check the ECU to see if the flapper will actually work, might have been deleted in the ECU aswell?
I saw a video from another youtuber where he used a diluted acid solution with water for the exhaust and it brought the shine right back for it.
What type of frame sliders would those be called?
waiting for next installment.
You know what you need? You need what every Yamaha rider needs: golden rims! 🫶 Nice series you got going on, I like! 😊
eagerly waiting for episode 4