Storing Your Regulators | Deep Dive
Ғылым және технология
Storing Your Regulators | Deep Dive
Check out THE BEST Scuba Diving Store online: www.simplyscuba.com
What's the best way to store your regulators? Is it in the bag? Do you hang them up? Or can you just store them in the shed? Well in this episode of the Deep Dive we discuss what are the best ways to store your regs.
Chapters
00:00 - Hello
00:32 - First Things First
02:11 - Storage Mode
03:02 - Regulator Bag
04:58 - Hanging Them
06:33 - K-Bye
___________________
Here at Simply Scuba, we're all about giving you the best advice, information and news about the awesome world of scuba diving. Subscribe to our channel and keep up to date with the latest news, product drops and the best scuba advice on the internet!
Masks - simplyscuba.com/Masks/ssdsl15544.htm
Fins - simplyscuba.com/Fins/sssd1389.htm
Regulators - simplyscuba.com/Regulators/sssd1382.htm
Dive Computers - simplyscuba.com/Dive-Computers/sssd1360.htm
BCDs - simplyscuba.com/BCDs/sssd1359.htm
Join us on Facebook: / simplyscubauk
Follow us on Instagram: / simplyscuba
Listen to us on Spotify: spoti.fi/3uDpHZH
Surface Interval Blog - mpora.com/tag/surface-interva...
#deepdive #storingyourregukators #regulators #storage #scubadiving #scuba #diving #scubaadvice #simplyscuba
Пікірлер: 15
*Shop Regulators* - www.simplyscuba.com/Regulators/sssd1382.htm How do you store your regulators? Let us know below!
Thanks so much for the "coil" part! I've been cramming mine, before this
I store them with the Purge Button Pushed, so that the o-rings don't get pushed always in to there seats.
Storage? My regs are being used every 2-3 days on average. I don’t have time to muck around with bags or perfect shaping of hose. Also, remove hose protectors, they hide problems with hoses and hold water against fittings.
Personally I just roll them up as described & put them loose on my Gear Gulper storage box. I don’t believe in keeping all gear in separate zipped up boxes & bags & if some things is stored behind a zip I leave the zip partially open. All my gear I store in a cupboard inside the house & never had a problem. I clean my gear thoroughly & ensure all is 100% dry before putting away.
Would you not want to disconnect the hoses from the first and second stages placing the fitting caps during storage and just assembling like the day before diving? That way you can store the hoses as straight as possible with no weight.
@seanson274
2 жыл бұрын
I agree with you, that makes sense
I spray a little "liquid silicone" on metal parts.
So with both DIN and yoke regulators there’s an area that is never really gona get cleaned well when you soak it because the cap is installed, but salt water does get into those areas. Do you guys then take off the cap, cover the regulator inlet with a dry finger, use a damp cloth to wipe around, then air dry it?
So a question about storing in a furnace room. I understand that when an electric motor starts it gives off ozone that causes plastic to degrade. Any suggestions for us folks who live in the great white north??
Nice short video. But I have one question left. My regulators have a pre-dive/dive switch. Which position is best for drying and which for storing?
@PedroOjeda
Жыл бұрын
That's just the venturi. Doesn't matter the position
Would it be good to vacuumpack your regs?
@simplyscuba
2 жыл бұрын
Oooooo we should try this out!
You guys need to workout your audio. It's always muffled and quiet compared to other videos.