Thank you for watching! If you enjoyed this video format, what effect would you like to see me cover next?? 🤔

@Vallosick

10 ай бұрын

Great video, Will! I think it would be cool to see a video like this about distortion :)

@DrVimto

10 ай бұрын

in logic, something called exciter, not sure what it's called in ableton. how it gives more dynamic.

@brianpiano7235

10 ай бұрын

The best video fromat ever. I would appreciate it if you made a video for all kinds of transitions, washouts, fxs, etc.

@DeejayRach0

10 ай бұрын

Saturation

@pimenz

10 ай бұрын

Maybe using delay, which often plays together with reverb?

I consider myself considerably experienced when it comes to sound design, production techniques, mixing, etc. I have watched over a thousand videos on music production, but I must say that your content is incredibly valuable. I am learning a lot of new stuff through your videos, and it will definitely be used as a beneficial implementation to my arsenal. Thank you for sharing this.

@EDMTips

9 ай бұрын

Rock on! You're welcome! 🙂 Thanks for watching and for the kind words of support 🙌🏻🙏🏻

You are an amazing teacher. You are able to explain problems that have plagued me for years in such a way where I am able to see beyond it & I am able to understand WHY I am doing it in the process. Thanks a ton for what you do dude. It’s very juicy info

@EDMTips

7 ай бұрын

You're very welcome, glad you found my videos helpful so far!

Pensado video on youtube: Abbey Road Reverb Technique - Into The Lair #128 What does he do there? 1. High Pass at 600 Hz (depends on source material, in this case it is a female vocal). 2. Low Pass at 6.65 kHz (same track) So the difference to what you do and recommend in your video here is to also filter high frequencies. Then Dave add Fabfilter Saturn. He stresses, that he processes the signal before it goes into the reverb (the input signal and not the output signal). I think that goes beyond what is commonly referred to as the Abby Road Reverb technique/method/trick. Typically, the Abby Road trick is High Pass at 600 Hz and Low Pass between 8 kHz and 10 kHz.

Can't thank you enough. You give meaning to my life. I wish I were from a country so I could buy your courses or donate or something, but my soul and energy is always with you.

@EDMTips

10 ай бұрын

Appreciate it, Brian! Thanks for watching and supporting the channel 🙂

Thank you very much for what you do, Will! Love your videos, always tons of very useful information, and your great energy and humor :)

@EDMTips

10 ай бұрын

You're welcome, glad you found my videos helpful! Thanks for watching and supporting the channel 🙂🙌🏻

Delay delay delay please 🙏🙏🙏🙏

@EDMTips

10 ай бұрын

Coming soon! 🙂

Always the best from @EDMTips !!! Keep it going, Will.

@EDMTips

10 ай бұрын

Thanks, Luis, really appreciate the support! 🙂🙌🏻

I was literally searching for Reverb Mixing tips earlier today! You read my mind! Great stuff! =)

@EDMTips

10 ай бұрын

I aim to please! Glad it was timely 🙂

Great tips on reverb. Thank you Will. ✌️

@EDMTips

10 ай бұрын

You're welcome, glad you found it helpful! 🙌🏻

I used to put too much reverb on everything, which I never noticed until I re-listened a track much later. Now I always try to apply it in a way where I only notice it when it's gone and I haven't disappointed my future-me yet.

@EDMTips

10 ай бұрын

It’s a natural part of the process, for sure

Lol. That tea must be good! Nice touch. Another great video, Will. I like the tip of getting the decay length dialed in, then reducing the dry/wet to compare with the reference track.

@EDMTips

10 ай бұрын

Glad you found it helpful! 🙌🏻 Thanks as always for watching and supporting the channel 🙂

Great video Will. I use the side chain trick you pointed out most of the time on my Lead sounds to keep the energy in it.

@EDMTips

10 ай бұрын

Cool! Thanks for watching and glad you enjoyed it :)

Great content as always. Thx 🙂👍

@EDMTips

10 ай бұрын

My pleasure, glad you enjoyed it! 🙂🙏🏻

I haven't been producing a year yet. but honestly stock plugins can be quite good when you learn how to use them.

@EDMTips

10 ай бұрын

I agree 100%

Thank you so much for the information.

@EDMTips

10 ай бұрын

You're very welcome! Glad you found it helpful 🙌🏻

Thanks so much for these videos! Wish I had tips like this 20+ years ago when I was starting out!

@EDMTips

8 ай бұрын

You're so welcome! Glad it was helpful 🙂

Excellent informative video as always Will I learned some tricks! thanks man 👍

@EDMTips

10 ай бұрын

You’re welcome! :)

very helpful and comprehensive., thank you

@EDMTips

10 ай бұрын

You’re welcome, glad you found it helpful! 🙂🙌🏻

Great Video mate!

@EDMTips

10 ай бұрын

Appreciate it, Jake, thanks for watching and supporting! 🙏🏻

Huge value, thanks!!!

@EDMTips

10 ай бұрын

Stoked to hear that! Glad it was helpful!🙂🙌🏻

Thanks Will, very helpful video. 👍

@EDMTips

10 ай бұрын

You're welcome, glad you found it helpful 🙂🙌🏻

A how to use delay video would be awesome 👏 Thank you so much for sharing your knowledge with us I’ve learned so much One of my favorite channels 🙏

@EDMTips

10 ай бұрын

You're welcome, glad you found my videos helpful! 🙌🏻 Delay is in the works now so keep your eyes peeled 😉

I don't usually comment on videos but this is SUCH a good video. Thank you. Love this series. Please make the one on delay!!!!!

@EDMTips

10 ай бұрын

Appreciate it, Amy! Thank you for watching and supporting the channel 🙂🙌🏻

we love you WILL , keep the videos coming :D :D

@EDMTips

10 ай бұрын

Thank you, I am really glad you liked it! 🙂🙌🏻

Will, excellent tips. I like putting a beat repeat plugin at the end of the reverb return track chain. You then get a chunky sounding reverb tail, sounds quite cool in certain scenarios.

@EDMTips

10 ай бұрын

I am glad you found it helpful! Thanks for watching and supporting the channel 🙂🙌🏻

Great video. Loving the track at 2.30ish

@EDMTips

10 ай бұрын

Cheers, Sanj, glad you liked it! 🙌🏻

An important aspect people overlook about fx, is you are adding another channel to your mix. So all the mud between 200hz and 450hz, you may be clearing it out on your channels eq, but you now have fx tracks that are modulating and resonating in the 200hz-450hz zone, so you have a swamp area in you low mids. Any high frequencies also get resonated in the fx, delays will ping around high end detail that rings, and verbs accentuate any high end irritations. Treating fx channels so they do not bring in mud and harsh high end overtones, can keep a mixdown clean sounding. Cutting reverbs at 600hz to 4000khz you can also use massive 10 second delays in a mix, that still sound clean.

@EDMTips

3 ай бұрын

Fantastic advice…totally agree and thanks for sharing!!

Thanks!! 👍🏻

@EDMTips

10 ай бұрын

You're welcome! 🙂

Great stuff as always, Will

@EDMTips

10 ай бұрын

Thank you, I am glad you enjoyed it! 🙂🙌🏻

Probably your best episode yet! So true..with verb...less is more...allow generous tails or wash on a single item exposed in a sparse mix...hopefully you'll be at ADE and I'll be sure to say hello.

@EDMTips

10 ай бұрын

I am indeed will be there :) We are organising a meet up of the EDM Tips Academy so join in if you are a part of it!

Delay is a must

@EDMTips

10 ай бұрын

It is on the cards :)

This ONE is the MULTIONE!!! Thank you!

@EDMTips

10 ай бұрын

You're very welcome, glad you found it helpful 🙂

Thank you brother. Yes need video on Delay I'm very confused to use delay proper

@EDMTips

10 ай бұрын

You're welcome, George, glad you found it helpful! Delay video is coming next month :)

Great video! would love the same kind of video on delays.

@EDMTips

10 ай бұрын

Thanks for the suggestion! This might be my next one in this series! 🙂

Everytime again: Thank you, Will! Got my first track signed because of you and your motivational, very well made Videos! :) Cheers, EDelMann

@EDMTips

10 ай бұрын

Stoked to hear that, Dennis! Congratulations 🙌🏻🚀 Keep up the good works 🙂

Great tips! Referencing is super important, but keep in mind that a solo section in the reference track might have exaggerated effects activated, maybe a more extreme reverb setting.

@EDMTips

9 ай бұрын

Glad you found it helpful! 🙂 Good point, thnaks for sharing! 🙌🏻

Will, useful as ever. Yes, you are right, sometimes less is more if you know how to handle reverb. It's not the case that a song will work if you just smack some reverb on it. I have to take a look at my own nose. So, those aspects are always worth watching your videos. Thank you.

@EDMTips

10 ай бұрын

You’re welcome!

yes....definitely do the delays video please

@EDMTips

10 ай бұрын

Thanks for the feedback, it is now on my list! Keep your eyes peeled on that on and thanks for watching and supporting the channel 🙂

Recording the vocals with reverb and putting it in front is a Great idea!

@EDMTips

10 ай бұрын

Glad you liked it! 🙌🏻

Brilliant Will 🙌😛

@EDMTips

10 ай бұрын

Cheers...Thanks as always for watching and supporting!

Thanks Will , another great vid. How to fix a weak sounding instrument in mono ( but sounds fine and louder in stereo) Thanks 🙏🙏🙏🙏🙏🙏🙏

@EDMTips

10 ай бұрын

Great suggestion, I will add this to my list. Thanks for watching and supporting the channel 🙂🙌🏻

Need headphones for this video. Not much difference coming through phone speakers

@EDMTips

10 ай бұрын

Yes, you will struggle to hear the difference on your phone.

@Itsyaboy88

3 ай бұрын

Beyond obvious when viewing mixing videos. Yikes.

Top notch tutorial. Thank you.

@EDMTips

8 ай бұрын

You're welcome, really glad you enjoyed it! Any point in particular you found useful?

@msgsaltsweet

8 ай бұрын

The side chain technique and placement of reverbs according to their usage, especially. I've not been sure of my way of applying the reverb plugins, and been watching hundreds of tutorials. This is "IT" tutorial for me. Thank you. @@EDMTips 👍

@EDMTips

7 ай бұрын

Stoked to hear that! 🙌🏻

Hi Will, you’ve been sidecahining the vox to the kick instead of the main vocal in min 15. Thank you for this tips ;)

Your vids are soooo bloody good 😉

@EDMTips

9 ай бұрын

Cheers, glad you liked it! Thanks for watching and supporting the channel 🙂🙌🏻

@yokelectronic

9 ай бұрын

@@EDMTips anytime bro 😉

Amen brother!

@EDMTips

8 ай бұрын

Appreciate it! 🙌🙏

Hi Will, please, is there a video somewhere on your youtube channel of how you made the "Good Things" track? Or is it downloadable as project? Sounds really cool. Thank you

@EDMTips

10 ай бұрын

I am still working on it but I will let everyone know once we release it! :)

I hope you make a lot of money from these videos because they are worth a lot!

@EDMTips

10 ай бұрын

Thank you, really appreciate the kind words of support! 🙌🏻

We need a video on reverb and delay throws

@EDMTips

10 ай бұрын

Quite a specific one! I will add this to my list :)

Thx Will...👍👍👍 ❤☮☯❤☮☯❤

@JoyfulWAVE

10 ай бұрын

Please Will...tell me if this has too much reverb ??? 😇 kzread.info/dash/bejne/Y3aBxMuyfZXXdJM.htmlfeature=shared

@EDMTips

10 ай бұрын

You're welcome, glad you liked it! 🙂

I've been experimenting with overly high-passing lead vox and then putting some of the lower freqs back with short delay and pre-delayed reverb. Is that a muddy mix in the making or a cool idea?

What do you recommend I use for ethereal guitar music, i.e dream pop? I use Eos 2. Not really into dance music.

Question re: global reverb: If every sound in the natural world has a slight amount of reverb in it, wouldn't a dry sound coming out of a speaker also then create reverb from the room it's played in? (Not including listening on airbuds)

@rickyspanish4792

10 ай бұрын

Yes absolutely! This is why every room you listen music in sounds differently. So you kinda get this 'free reverb' on all music you make - you just don't have any control of what type of reverb it's going to be, since it's dependent on the listener's setup. Keep in mind this reverb is usually a lot less 'reverby' than the reverbs you would add to your music deliberately - so you still 'need' to add reverb to your music despite getting this freebie auto-reverb :P

@EDMTips

10 ай бұрын

What Ricky said :)

0:59 - how do you (and many others) manage the reverb sound so wide and clear? Mine always sounds too centered and even muddy no matter what I try.

Great video! A question Will: is it a mistake to favor delays instead of reverbs on vocals in fast-paced songs? I feel reverb makes it a little bit cloudy. But maybe that's because I didn't sidechain compress the reverb to the lead vocal.

@EDMTips

8 ай бұрын

It completely depends on the length of the reverb, really. No reverb at all will most likely sound strange, unless you want a very intimate sounding vocal

@alessandrosummer

8 ай бұрын

@@EDMTips maybe it’s genre dependent. I make electronic influenced rock like Linkin Park and Muse, maybe it doesn’t suite this type of songs

Hey, @EDMTips 👋🏽 Please do a video on making a Nox Vahn style beat 🙏🏽

@EDMTips

10 ай бұрын

Great suggestion, Derek, I will add this to my long to-do list! What's your favourite track of his?

@TheDerekCrosson

10 ай бұрын

@@EDMTips apprecite it! 🙏🏽🙏🏽🙏🏽 My favourite track is Come Together which he did with Marsh 😊

@EDMTips

10 ай бұрын

Thanks, I will check it out!

@TheDerekCrosson

10 ай бұрын

@@EDMTips 🙏🏽

Great video. Limiters, please.

@EDMTips

10 ай бұрын

Great suggestion, I will add this to the list :)

Room verb for all tracks in logic? Could you advise best stock plug yo use and parameters. 😊

@cjgoeson

10 ай бұрын

Try space designer. In the preset menu , go to medium reverbs, rooms, and choose sweet room. You can adjust the decay length. Sounds great!

Can somebody tell me the name of the track at 6:29, please. Has it been released?

@EDMTips

10 ай бұрын

Nope, it's the one I am working on at the moment so keep your eyes peeled on the release later this year 🙂

When using the auxiliary channel for the reverb, should your input come from individual channels or from the sub mix buses?

@AutPen38

10 ай бұрын

It depends what effect you're trying to achieve. Sometimes you might want all your percussion parts, or your synths, to sound like they were recorded in the same room, so you'd bus them to the same reverb, but other times you might want more separation. Similarly, you might have two bass layers, but you only want reverb on the higher frequencies and not on the sub-bass, so you wouldn't send the whole bass group to the reverb aux.

@alessandrosummer

8 ай бұрын

@@AutPen38I usually input the aux channel from a bus, but if you need the reverb in only specific tracks you can send the individual tracks

Delay 🔥

@EDMTips

10 ай бұрын

Nice one, I will add this to my list! 🙌🏻

Loved the Franky Wah tutorial you shot, but I was wondering if you could cover how to do the speed up & slow down of synth sounds as illustrated in Franky's track "Distance Between Us" at minute 2:25 onwards? Link to track:- kzread.info/dash/bejne/fHidm9WDiLueepc.html Cheers Will

@EDMTips

10 ай бұрын

This is a great question to ask in the EDM Tips community or on one of our live group calls in the Accelerator :)

Yes will! Keinemusik tutorial?

@EDMTips

10 ай бұрын

Ooo, great suggestion! I will add this to my list and let's see how many people will vote for it! 🙂

@alessandrosummer

8 ай бұрын

What is that? I have no idea!

You 're right, it is a waste of time. It 's barely audible in most of your examples and as far as i know. If u can 't hear it well, remove it, its clutter.

@fathuman

10 ай бұрын

You watched this video on your phone I imagine right?

@Hermit_

10 ай бұрын

@@fathuman nope, it 's a fact, if an effect does not make a big change or enhance your sound a lot. Don 't use it.

@fathuman

10 ай бұрын

@@Hermit_ I watched the vid on studio monitors and heard the difference. Assuming we're talking about the room reverb trick (since the others are more obvious) it does add subtle cohesion and width to the track. Its these subtle moves here and there that add up to a pro final mix I find in my experience and would warn against discounting moves that don't "make a big change".

@Hermit_

10 ай бұрын

@@fathuman I did like the vocal one. if it comes to the room reverb thing, it 's nice to have early reflections but as far as the actual reverb tail goes, silence it.

@EDMTips

10 ай бұрын

IN your case, it depends on what speakers you use.