Pretty close! Seems like good saws ! I would own either one! Well , I do own a 562! Love it!

Good stuff, keep up the good work and never stop.

2:53 Is the beginning of the STIHL and 7:20 is the beginning of the Husqvarna

Jack , I'm a Husky fan ! But that was very close! Either one I would use in the woods! Thanks Jack !

Excited to have you do my 362 eventually. Fun to watch a master at his craft.

God bless. Good video thank you

Very good 362 and 562

love all your videos I have both saws I am a stihl man the Husqvarna is a decent saw but I still like the layout of stihl great work no the less

@markclark1605

2 жыл бұрын

I like both brands, I think the sthil is not as balanced as the Husqvarna. The Husqvarna is better balanced. The 362 is front heavy imo!

Unofficially, I got about 18 seconds with the 362 and 16 seconds with the 562. I'd own either one.

Thanks for the video love these but I have to think the stihl sounded more healthier to me

I'm a happy homeowner and have ms362 I've actually emailed you about it and you actually talked me out of sending it to you. I don't know if someone had it apart before I got it but it will spin 17k and pulls harder than that one, maybe i should just let it be. Happy sawing!

@hotsaws101

5 жыл бұрын

Sorry, cannot say I remember that conversation. I get a lot of contacts, ranging from bar oil to wedges. What was your name again?

@MrCoontastic

5 жыл бұрын

@@hotsaws101Jack Klages. Been a year or so, had a sideways cutting issue but I'm left handed and my arborist buddy straightened me out. My ms362 is more than enough for me. It will pull a 25 inch bar all day and ask for more. I like your honesty telling me I don't need more.

@hotsaws101

5 жыл бұрын

Copy, remember now. I like the KISS methodology and the "if it ain't broke don't fix it" philosophy. One thing though, unless a guy has both/all saws right there, exeriencing the same atmospheric conditions while running the same bar and chain it is purdy hard to tell "who's is badder". Thanks for watching.

👍👍👍👍😉😉😉😉😉gotta love them psy-ko 362’s

Are the 572 and 562 transfer ports interchangeable?

@hotsaws101

4 жыл бұрын

Brent hi. If your talking about the bolt on covers, no. Thanks for watching.

Looking to replace a much loved, 25 yr old Husky 55. I'm leaning to the 562xp based on history. I want more power than my 55 has, but not much more weight?

@hotsaws101

3 жыл бұрын

Padraic hi. I'm not sure about your 55's weight. Seen where they are 11.4 pounds. The 562s come in at 13.3. HP differential is 3.4 vs 4.7 as far as I know. In the end, a lot of difference in weight but the hp advantage of the 562 is huge. The Stihl ms362s are in the middle at 12.3 pounds. Even though their hp rating is 4.69/7 (depending upon where you look) they, like most of the new Stihl chainsaws, are lacking in lowend power imho. Currently, the company seems to going for the rpms rather than torque. The Echos are a non smog saw and weight about the same as the 562. They have good lowend power also. The 6100 Makita is around 13.2 pounds with 4 6 hp. It's a smog saw but uses a different delivery method of introducing the raw air. I think it works, coupled with other design characteristics, better than what is seen in the Husky & Stihl saws - which are almost identical. You can get a wrap handle in all as far as I know. Thanks for watching.

Sweet,

Does the ms362 standard have a regular carb on it or is it electronic?

@hotsaws101

4 жыл бұрын

Ryan hi. Regular. No way to run the solenoid on the non m-tronic version. Thanks for watching.

@JosephMartinez-vf3ly

Жыл бұрын

F*******ck the electronic it kicks my ass I was told by someone has many people to back them told me that I need the dealer to tune my carb .....I dunno how true that is I will say the 362 when running right is a good saw I was wondering myself are you able to switch back to regular carb?

Nice! !!😆

HUSQVARNA!!!!!!!!! Good vídeo and stuff! Keep going!

👍👍👍✌️

I love your videos. I learn a lot from them. You are the only one that does comparing saws by cutting correctly. But if I have to watch you change one more damn bar and change I'm going to start bitching. No I'm kidding. But video.editor would for sure get you more views haha

I would like to buy a 60 what do you recommend Husqvarna 562 ? 560 ?

@hotsaws101

2 жыл бұрын

Andrea hi. The 560 is the European version of a 562 - what is available in North American. Many factors to consider: Dealer support locally. Which dealer you want to spend your hard earned dollars with. The bar mount that is currently in the collection. Whether or not there are saws with similar part in the collection already. Saw mass may be a consideration. The 562 is arguably at the top of the heap "powa" wise but also at the top of the heap weight wise. Cost might be a selling, "buying", point. If the saw will remain stock or whether the owner intends to zipp it. If end result top tier HP after a saw shop makeover is important then a couple of the current choices are better. Ergonomics. They all "handle" a little bit differently in your meathooks. Visual. Some like the look of certain color schemes better than others. For the 1st time or random buyer - I'd "fondle" a few and ask to use one of my chains in a demo operation to get a feel for both maneuverability & power. Thanks for watching.

Every time I watch a hotsaws video I say "Holy crap" them saws are fast!

Do you have a video of a fully modded 562? I bet that really shits and gets!

@hotsaws101

5 жыл бұрын

Mike - Fully modded? There are a lot of definitions for fully modded out there I imagine. And some of it would depend on with whom you are conversing.... Thanks for watching.

@mikegott3364

5 жыл бұрын

hotsaws101 I was wondering about your mods, you seem to have several different stages. I was curious to see what your most extreme was. Nice videos

What is the long guide and what is the chain in stihl

@hotsaws101

2 жыл бұрын

Hubert hi. I explain the bar & chain in this session starting near the 1:40 mark. Thanks for watching.

It´s better .325 pitch tha 3/8 pitch for a long bar?? i am think to change the original bar in 20 inch for a 28 inch bar in my Husqvarna 562

@hotsaws101

2 жыл бұрын

Victor hi. For the average guy, 3/8s. But long to you might not be long to another. Chip size will play a role in how the oiler handles the longer chains. Better be pushing chips and not dust on a "long bar". Thanks for watching.

Husky killed it with 12-13 seconds a cut & the 362 was 13-15 seconds cut

What brand of bar is that?

@hotsaws101

2 жыл бұрын

Davis hi. Oregon. Thanks for watching.

Huskys 60cc saws always impress me...I run a 262xp with a 20" bar and makes the best all arounder around....lol

Id say its prett damn close around 18s btween both saws that was a close one

Makita 6100

362- 15.42 562-15.65

@log4ever1

5 жыл бұрын

Both second runs.

@g.d.7629

4 жыл бұрын

362 does not keep up with 2260/560/562xp

@g.d.7629

4 жыл бұрын

Dolmar 6100 w carb set to factory specs may beat them all. And yes I have one.

@g.d.7629

4 жыл бұрын

But 362 shud have ran 20 in on all.

Looking at miss Daisy

Bunk test

24 or 28 inch guide bar??

@hotsaws101

3 жыл бұрын

Victor hi. At the 1:47 mark I started talking about the bar. It's a 30", .375 pitch bar & chain combination. Thanks for watching.

@RomuloTDI

3 жыл бұрын

@@hotsaws101 Hi hotsaws101. Thanks for your reply. Ya, it´s true, now i listen it, but before to send you the question i did not listen it, only saw the video. Thanks again for your reply. And is not to heavy 30 inch for this machine??. .375 pitch?? may be you would like to sed .325 pitch?? i have one 562 withe 20 inch bar and 3/8 pitch, may be 30 inch with 3/8 pitch will be a very heavy conbination for my chain saw, no??

Looks like the Husqvarna beats out the Stihl

Here we cut White Oak & Red Oak. Try your race with the 38" bar & chain on that.

@hotsaws101

2 жыл бұрын

Dave hi. Please check the pinned comment in this video - kzread.info/dash/bejne/X2GAvKSjZ8zWcpc.html I can build saws that can handle your oaks. Thanks for watching.

@davegutenech7188

2 жыл бұрын

@@hotsaws101 If I were much younger & had more time left I would send you a 44 magnum to work your magic on. Keep the faith Bro.

I'm a Stihl guy, but the husky was a second faster by my count and sounds better. To each their own, but I believe the husky 562 is superior to the 362 in all research.

Both saws cut pretty good and it was a close battle. The Stihl took 5 pulls to start but the Husqavarna took only 2 pulls. So Husqy for the win.

Mmmm, doooughnuts. From a tree? Lol.

@hotsaws101

5 жыл бұрын

I cudda swore that the centers were falling out of the slices. Oh well....

@1d1hamby

5 жыл бұрын

@@hotsaws101 ,too funny. Maybe if you did four or five plunge cuts out of the center? : )

Why's that 360 cut so much better then the 390?

@FishFind3000

5 жыл бұрын

grin and bear it - 362 is in the pro line as the 391/2 is in a farm ranch line. It’s not as powerful. The pro line is just fine tuned better.

@arborist460

5 жыл бұрын

I traded a new 390 for an old 262 with no coil or bar.

@grin64

5 жыл бұрын

They didn't give a price break on that thing. I expected allot more. The old homlite xl12 would run circles around this thing.

@FishFind3000

5 жыл бұрын

@@grin64 i know the 392 go for around high 4 low 500. somewhere around there. my 362c-m with the electric carb was at $750 with the longer 25" bar and at a bit of a discount than msrp.

@grin64

5 жыл бұрын

@@FishFind3000 is the 362 a powerful saw?

Should have own chain and bar

I love a husky but live in the Sandhills of the south east. No husky support here these guys are all still here and I hate it

562 was faster

Every time I watch a hotsaws video I say "Holy crap" them saws are fast!