Stihl MS-180 CBEZ (aka easy to start) pull rope repair.
Stihl MS-180 CBEZ (aka easy to start) recoil, starter assembly, recoil spring repair.
Жүктеу.....
Пікірлер: 21
@cousinfuzzy45443 жыл бұрын
Good info Lester,you make it look easy.
@teamcarramrod12 жыл бұрын
Thanks for the help. Appreciate you talking about aligning the groove in the top piece at the 3:20 mark. I"ve been troubleshooting for the last hour, that did the trick.
@kmartin40082 жыл бұрын
Thankyou very much you just solved my problem .
@williamsmith71683 жыл бұрын
great video just saved me a lot of agravation not to mention saving me money!!!! THANKS AGAIN!!!
@chrism25063 жыл бұрын
Thank you Lester, very helpful but a part number would make it even better.
@lesteroliveintheshop9825
3 жыл бұрын
I definitely appreciate the feedback and advice. Thank you.
@brendahall74833 жыл бұрын
Good job, very helpful. Wish video was full screen though.
@lesteroliveintheshop9825
3 жыл бұрын
Not sure how to make it full screen
@lesteroliveintheshop9825
3 жыл бұрын
I’m learning, they’re getting better
@spartansteve369
2 жыл бұрын
@@lesteroliveintheshop9825 Just turn your phone sideways while recording. Thanks for the great informative video. Just bought a used 211C with this problem.
@lesterolive
2 жыл бұрын
@@spartansteve369 I appreciate the advice and the feedback.
@72superlead2 жыл бұрын
Thanks for that explanation, I wonder how often these fail on even newer machines? I have a BR800 a week old that doesn't always seem to engage
@RonaldoRodriguez-nl7dl Жыл бұрын
Cuanto Cuesta esta pieza
@gunsnoptics2172 Жыл бұрын
How many turns are needed to preload the spring if the rope breaks?
@erickramos39323 жыл бұрын
Hello sir! Do you have a part number or link that I can use to order the spring housing? Got the same issue with mine.
@trentkeller1418 Жыл бұрын
So, once it's disassembled to this point, is the actual Rope Replacement, similar to the many Stihl chop saws I've replaced the ropes on???
@thelousyfloridatravelers6390
Жыл бұрын
Yep
@josemontoya8612 Жыл бұрын
Some idiot lost those little black things that kick out, do you know if I could get more somewhere or do I have to order the whole part?
Пікірлер: 21
Good info Lester,you make it look easy.
Thanks for the help. Appreciate you talking about aligning the groove in the top piece at the 3:20 mark. I"ve been troubleshooting for the last hour, that did the trick.
Thankyou very much you just solved my problem .
great video just saved me a lot of agravation not to mention saving me money!!!! THANKS AGAIN!!!
Thank you Lester, very helpful but a part number would make it even better.
@lesteroliveintheshop9825
3 жыл бұрын
I definitely appreciate the feedback and advice. Thank you.
Good job, very helpful. Wish video was full screen though.
@lesteroliveintheshop9825
3 жыл бұрын
Not sure how to make it full screen
@lesteroliveintheshop9825
3 жыл бұрын
I’m learning, they’re getting better
@spartansteve369
2 жыл бұрын
@@lesteroliveintheshop9825 Just turn your phone sideways while recording. Thanks for the great informative video. Just bought a used 211C with this problem.
@lesterolive
2 жыл бұрын
@@spartansteve369 I appreciate the advice and the feedback.
Thanks for that explanation, I wonder how often these fail on even newer machines? I have a BR800 a week old that doesn't always seem to engage
Cuanto Cuesta esta pieza
How many turns are needed to preload the spring if the rope breaks?
Hello sir! Do you have a part number or link that I can use to order the spring housing? Got the same issue with mine.
So, once it's disassembled to this point, is the actual Rope Replacement, similar to the many Stihl chop saws I've replaced the ropes on???
@thelousyfloridatravelers6390
Жыл бұрын
Yep
Some idiot lost those little black things that kick out, do you know if I could get more somewhere or do I have to order the whole part?
@thelousyfloridatravelers6390
Жыл бұрын
You can purchase just the pawls
Do you have a part number?
Simon sinek