Stihl Fs 561 C-EM with durocut 40-4 and Stihl Fs 560 C-EM with autocut 56-2 working side by side.
Жүктеу.....
Пікірлер: 406
@user-ft4sj1py9r2 жыл бұрын
Неимоверно красивая природа в вашей стране! 🏡🌳🏡🌳🏡🌳🏡🏡🌳🏡🌳❤👍👍👍☺🖐
@CsabiTools
2 жыл бұрын
🙋♂️
@user-ft4sj1py9r
Жыл бұрын
@@arinakafyan6020 🌸🌻🌸🌻🌸💖👋
@OudomOfficial2 жыл бұрын
The new model is stronger than old model👍
@CsabiTools
2 жыл бұрын
Hello, yes it’s slightly stronger 🙋♂️
@sahraagresta1735
Жыл бұрын
lol
@cosminignat26112 жыл бұрын
Buna ziua dl Csabi! Felicitari! Faina femeie, faina echipa! Sanatate va doresc si succes!
@CsabiTools
2 жыл бұрын
Buna domnu Cosmin, multumim mult de aprecieri, salutare asemenea iti doresc si tie 🙋♂️
@user-du5jo6gt7z
Жыл бұрын
0 U UCI 9
@tristanmenton95742 жыл бұрын
Very nice brushcutter I got a fs 280 well done
@CsabiTools
2 жыл бұрын
Thanks 😊, I have also a Fs 300 my oldest machine 🙋♂️
@jamescrashley22632 жыл бұрын
Thank you for the review in English.
@CsabiTools
2 жыл бұрын
Your welcome 🙋♂️
@kudamuyun3173 Жыл бұрын
Very impressive! The only thing I concerned is about the safety while both of you demonstrating the machine. Mind your distance at least 25m away as if there any flying object might be dangerous. Again dont forget the basic PPE while operating such machine.
@CsabiTools
Жыл бұрын
Hello, thanks for the advice I totally agree with you, we dare to work so close to each other because I know the terrain and it’s very clean without no debris whatsoever, 🙋♂️
@machinesdequalite
6 ай бұрын
I work with these machines and I know how accidents happen with flying objects. The cameraman has been very brave to stand so close and in front. Never the operator should work so close and never one should use the machine facing another person. Glad nothing has happened.
@Sigurd651
5 ай бұрын
Agree 100%, more people should know this, im wishing a working face mask, and a triangular brush blade for christmas tomorow :D, Merry christmas btw, and i know from my line trimmer that with only glasses i sometimes get small stones, dirt and grass on my face, im 14, and i bought this used km 131 lately, and almost haven't used it but a litlle, and i won't use it again until i get a face mask :D @@machinesdequalite
@balazssaghy10462 жыл бұрын
Sziasztok! Tökéletes mind a kettő. Szuper gépek.
@CsabiTools
2 жыл бұрын
Hello, koszi szepen, udvozolek 🙋♂️
@ukaszysakowski58952 жыл бұрын
I LOVE WORKING STIHL BRUSCHCUTTER!!❤❤
@CsabiTools
2 жыл бұрын
Hello, yes you are right they are amazing machine, greetings 🙋♂️
@ukaszysakowski5895
2 жыл бұрын
@@CsabiTools THAT'S TRUE!! GET LUCKY.
@jvenema86 Жыл бұрын
so almost wonderful beautiful video friend i love it so much
@CsabiTools
Жыл бұрын
Hello my friend, thanks so much for the kind words, I’m glad that you like it,greetings,🙋♂️
@jvenema86
Жыл бұрын
@@CsabiTools yes it is my best friend can we talk from insta?
@CsabiTools
Жыл бұрын
@@jvenema86 yes , text me when you’re available.
@jvenema86
Жыл бұрын
@@CsabiTools i have text you
@Andres66667 Жыл бұрын
Excelente video. Pero es importante usar lentes o anteojos para realizar todo tipo de trabajo en estas máquinas. Ya que el golpe de la basura llega a los ojos. Saludos desde Guatemala
@CsabiTools
Жыл бұрын
Hello, thanks for the advice, I’m glad that you enjoyed the video, greetings 🙋♂️
@Andres66667
Жыл бұрын
@@CsabiTools ok
@babitapaullobmmynhn2221
Жыл бұрын
@@CsabiTools q
@babitapaullobmmynhn2221
Жыл бұрын
@@CsabiTools qqwqqqq
@AdviceFromGarage8 ай бұрын
Stihl is a very good brand. But for this kind of work (meadow mowing), I would rather choose a lighter brushcutter with a smaller engine capacity, due to consumption and also less strenuous work. Alternatively, a different type of mower, not a brushcutter. The 10 kg weight of the brushcutter is crazy if you have to work with it for several hours a day. A good but also powerful brushcutter with high-quality components does not weigh more than 8.5 kg, ideally between 6 and 8 kg. I had a Stihl FS 450, but I sold it because compared to my second brushcutter at home - a 24-year-old Honda UMT 28 D, it had almost double the consumption and was also heavier. Honda mows everything like an STIHL but for less money. I would recommend buying these strongest STIHL brush cutters only to companies that use them every day for several hours (if they don't mind higher fuel consumption), or use them in the forest with a disc intended for that purpose. For regular users and households who mow the grass once every few days or weeks, as I do, while I mow 5 -7 hours a day, there are much better brush cutters, but with a smaller engine capacity (from 28 - to approx. 36 cc), precisely because of consumption and weight. I have had an excellent experience with Honda. Brush cutter maintenance is also important (mainly cleaning the air filter) and even more important is the correct oil ratio, I use red STIHL and especially high-octane E 5 gasoline. Especially in older brush cutters, never refuel or mix E 10 gasoline with a higher ethanol content of up to 10 % (alcohol). It destroys rubber hoses and various seals that were not adapted to it from the factory. I'm just filming and uploading parts of a service tutorial for my Honda brush cutter on KZread to my channel. I mix STIHL red oil and high-octane (100) E 5 in a ratio of 1 : 40 and I am very satisfied with the performance, super consumption, and also with the fact that my Honda brush cutter has been working for me motorically without problems for almost 25 years. I just had a problem with one rubber tube when I was refueling with new E10 gasoline for a while, which replaced Natural 95 gasoline at gas stations in Slovakia after 2020. After one rubber tube broke, I'm already refueling with a few cents more expensive, but much better quality gasoline E 5, with which the brushcutter has higher performance, lower consumption, and does not clog the fuel system. If I were to buy a Stihl again, so that I would like to use it every day, I would probably rather buy a smaller, but also professional STIHL FS 311, precisely because of better consumption and lower weight. Greetings from Slovakia.
@CsabiTools
8 ай бұрын
Hello, thanks for the advice, I agree with you, indeed the big machines are heavy but also when I go to work I can cut a lot more faster with them especially with the brush knife or with the trimmer heads, greetings from Romania,🙋♂️
@AdviceFromGarage
8 ай бұрын
@@CsabiToolsHello, and btw. thanks for the great video. Good luck :).
@adamo49042 жыл бұрын
Another great video. Your English is getting very good! 👍🏼
@CsabiTools
2 жыл бұрын
Hello Adam, thanks ,greetings 🙋♂️
@oinquizidordelatoscana4338 Жыл бұрын
Wunderful girl planter🥰👏👏👏👏 i love sthil 🙋♂️
@CsabiTools
Жыл бұрын
Hello, thanks so much, greetings 🙋♂️
@waltflansburg5608 Жыл бұрын
Impressive. I like them both but it looks like the durocut 44 with the 4 string head cuts the best. I’ve spent hours and hours cutting similar conditions with the FS250. That’s why I’m looking at the big boy model.
@CsabiTools
Жыл бұрын
Hello yes it’s cutting slightly better than the autocut, the only downside is that we have to change the trimmer line manually, 🙋♂️
@cristoferpereira6359
Жыл бұрын
No
@bambinopons3505
Жыл бұрын
@@CsabiTools the women 😍😍😍😘
@CsabiTools
Жыл бұрын
@@bambinopons3505 yes I know my girlfriend.
@matthewheffernan3877
Жыл бұрын
FS250 is brilliant machine so light so much power. Take the spark arrester out and it will go a little better too and won't carbon up. Take the guard off and get a speedfeed head it will be as faster in these conditions than these 560's with guards still fitted. but remove the guards from these 560's and they will be very fast The only issue with these big machines is they are slow to change directions from left to right as its a lot of weight. In short grass 250 is the faster machine.
@oscarrenebarbosahernandez5139 Жыл бұрын
Mucho cuidado que las espigas se convierten en proyectiles a 11000rpm, buen trabajo! 👏🏼👏🏼
@CsabiTools
Жыл бұрын
Hello, thanks, greetings 🙋♂️
@Brush_Cutter_Man5 ай бұрын
Both brush cutters are very fast and have great power
@CsabiTools
5 ай бұрын
Yes indeed the most powerful machines from Stihl,🙋♂️
@Brush_Cutter_Man
5 ай бұрын
@@CsabiTools 👍
@olexboris73146 ай бұрын
I can see 3 gorgeous machines 😅
@CsabiTools
6 ай бұрын
Yes indeed 😂😂😂
@kusakaritarou Жыл бұрын
He's a professional lawn mower.
@CsabiTools
Жыл бұрын
Hello, not yet but it’s learning fast,🙋♂️
@rafabakiera76832 жыл бұрын
Super brawo na koszacej Pani nawet nieźle jej to koszenie idzie Lab bo Pan to profesja nic dodać nic ująć ja mam kosę sthil FS 260 Nimi marzeniem jest mieć kosę FS 550 super robota 🇲🇨🇲🇨👍👍👒👒Laleczki i pozdrowionka od Rafała z Polski a zaraz się zabieram za oglądanie Pana filmy o pile akumulatorowej👍
@CsabiTools
2 жыл бұрын
Hello, greetings from Romania 🙋♂️
@rationalmaximiser2 Жыл бұрын
unstoppable. well done. just dont wipper snip ya missus
@CsabiTools
Жыл бұрын
🙋♂️
@JOBERTDAYUNOАй бұрын
Good job ❤❤❤ nice grass kat. KAMAWER VLOG TV
@CsabiTools
Ай бұрын
Thank you! 🤗
@remidarque8105 Жыл бұрын
Super magnifique boulot
@CsabiTools
Жыл бұрын
Merci beaucoup,🙋♂️
@remidarque8105
Жыл бұрын
Derien moi je taf en espace vert aussi
@leideferreira-pu4mh9 ай бұрын
Esssa máquinas são muito ótimas não vejo a hora de comprar a minha 460 da stihl
@CsabiTools
9 ай бұрын
Hello, yes indeed they are really good machine’s,🙋♂️
@tzurtex6336 Жыл бұрын
I use a rotor blade Or a disk blade and I clear very thick mini trees. Our machine is 12 years old and the other is a couple of months old and work
@CsabiTools
Жыл бұрын
🙋♂️
@GrassCutterPinoyTV Жыл бұрын
That's very very strong my friend 💪💪💪💖🇵🇭
@CsabiTools
Жыл бұрын
Hello, thanks so much my friend, greetings 🙋♂️
@andrasorosz5662 жыл бұрын
Szia Csabi ! Nagyon jónak tűnik a 40/4 damilfej ! Az idén már nem, de jövőre beszerzek egyet ! Köszi a videót👍
@CsabiTools
2 жыл бұрын
Szia Andras, igazad mongyam engem is meglepet nagyon jol ment à 40-4 damilfej, szivesen udvozolek 🙋♂️
@andrasorosz566
2 жыл бұрын
@@CsabiTools Köszönöm 👍
@denisvertel1035 Жыл бұрын
Excelente que las mujeres aprendamos atrabajar con estas maquinas en el campo.
@CsabiTools
Жыл бұрын
Hello, thanks greetings 🙋♂️
@bobbystewart2605 Жыл бұрын
Those are two impressive units. Ashame they’re as expensive as they are
@CsabiTools
Жыл бұрын
Hello, yes indeed they are expensive,🙋♂️
@sakisalampeis5721 Жыл бұрын
Very nice stihl
@CsabiTools
Жыл бұрын
Thanks, greetings 🙋♂️
@mitelalexandru2544 Жыл бұрын
Motocoasele astea sunt ale tale sunt super bune
@CsabiTools
Жыл бұрын
Salutare, da sant motocoasele mele, da sant foarte multumit de ele,🙋♂️
@claudiaaugustin6909
Ай бұрын
❤😢😢😮😅😊
@gowrilakshmiamruthmahal6319 Жыл бұрын
Good job 👌
@CsabiTools
Жыл бұрын
Thanks 😊
@user-ml4mc6mu2f9 ай бұрын
У девушки красивая фигура
@CsabiTools
9 ай бұрын
🙋♂️
@matthewheffernan3877 Жыл бұрын
Good review but notice the machines are at maximum revs and basically at low load. This is like driving your car in 1st gear on the highway. You will get there eventually but its slow. With that much power you need to take the guard off and let the string out a lot more. You should be able to cut a 600mm swath maybe more depends on how the string behaves. I go until it starts to wrap around the head and then i know I've gone 1 bump too many. I cut farm hills for up to 8 hours at a time. I don't have time to be cutting with those silly push in strings. They wear down and then you are only cutting 400mm then you have to stop and put new ones in again. I carry heaps of extra line and a speed feed head. Keep bumping it and maintaining huge cutting path.
@CsabiTools
Жыл бұрын
Hello, thanks for the advice , I agree with you the machine indeed it’s at maximum revs, me personally I like to cut the grass always with the deflector on ,now for this big machine like in the video I have a new guard with a bigger cutting diameter ( 480 mm ) , if the grass it’s big and thick even with this big machine it will be a struggle to cut without guard and like you said 600 mm I think it’s too much in big and thick grass, smaller grass I think it can handle it, greetings,🙋♂️
@samidaher64586 күн бұрын
good job
@CsabiTools
6 күн бұрын
Thanks 😊
@madmarten772 жыл бұрын
Bravo boss ! Subscribed !
@CsabiTools
2 жыл бұрын
Salutare, multumesc,🙋♂️
@agnesmayermacedo9958 Жыл бұрын
Muy bien pareja, que bien lo hacéis, muy coordinados, mejor trabajar en compañía, felicitaciones un saludo
@CsabiTools
Жыл бұрын
🙋♂️
@zedacruja681 Жыл бұрын
Eu trabalhei com o meu 45 minutos mais ou menos depois despejei a gasolina toda e deixei ele ao relantim ate que a gasolina termina e agora ja esta sem trabalhar faz em novembro 2022 um ano.sera que vai acontecer alguma coisa de mal ao motor.falo do stihl 560 em Portugal
@danilomancini15132 жыл бұрын
Salve bei mezzi forever stihl la ragazza a l'inizio lasciava l'erba 🤣🤣🤣 bel lavoro 🙋♂️❤💯😎🇮🇹
@CsabiTools
2 жыл бұрын
Hello, thanks for the kind words, greetings 🙋♂️
@alexandrobettio
Жыл бұрын
@@CsabiTools
@user-xd2pj1rv7s Жыл бұрын
Девушка просто шикарная!
@CsabiTools
Жыл бұрын
Thanks so much,🙋♂️
@fcgamerclipes3362 Жыл бұрын
Eu tenho uma rossadeira FS80 essas rossadeiras são ótimas pra serviço pesado!
@CsabiTools
Жыл бұрын
Hello,🙋♂️
@WatunesochanelАй бұрын
Nice Stihl
@CsabiTools
Ай бұрын
Thanks 😊
@emilmihailpop6162 Жыл бұрын
Lucky man! Best tools and a real woman! I envie you!
@CsabiTools
Жыл бұрын
Hello, thanks for the kind words, greetings 🙋♂️
@user-ch5bx4yp3h2 ай бұрын
Recently I bought a sthl fs 120 😊
@CsabiTools
2 ай бұрын
Good luck with your purchase, greetings 🙋♂️
@channelanggi1300 Жыл бұрын
nice video my friends
@CsabiTools
Жыл бұрын
Thanks, greetings 🙋♂️
@VysocinskaVsestranna195 Жыл бұрын
Tohle mě hodně moc baví, ať se daří.
@CsabiTools
Жыл бұрын
Thanks so much, greetings,🙋♂️
@SasaMowe Жыл бұрын
Szia! Megéri beruházni az Fs 560/561-re esetleg? Nekem egy fs 460 van, elég gyakran használom, bozótvágástól megkezdve nagyobb területek kaszálásáig. Az 560-sok nem túl nehezek már? Erőben annyival meggyőzőbb?
@CsabiTools
Жыл бұрын
Hello az igazsag hogy sokal erosebb es nehezeb egy Fs 560/561 , ha sokat fogsz vele dolgozni megeri mert sokal erosebb es nagyob keseket rakhatsz a gepre es hamarab fejezed be a melot…….. ezt te magadnak kel eldonteni ha megeri, 🙋♂️
@antoniojorgemartinscadete9336 Жыл бұрын
Gostava de ver uma demonstração de corte em silvas e giestas, este tipo de trabalho qualquer máquina de potência média faz.
@CsabiTools
Жыл бұрын
Hello, check out my channel, I have multiple videos with different machines, ,🙋♂️
@mariusbucur5164
Жыл бұрын
@@CsabiTools iq
@stefan78692 жыл бұрын
Good video
@CsabiTools
2 жыл бұрын
Hello, thanks greetings 🙋♂️
@purnomojembrang9224 Жыл бұрын
Semangat master 🇮🇩
@CsabiTools
Жыл бұрын
🙋♂️
@charlyapkarian1511 Жыл бұрын
This machine don't cut grass, they vaporize it ! ! ! 😂 I own the FS 460 machine and i can say its really the most polyvalent machine from Stihl with very good confort and consumption, i'm sure that with the new stihl harness Xtreem i could cutting grass all day long without effort. 560/561 are really "beast' for forestry and very hard task, nothing my brushcutter can't do, but, less easier !
@CsabiTools
Жыл бұрын
Hello, I totally agree with you the Fs 460 it’s one of my favorite machine and yes the Fs 560- 561 are real beast, 🙋♂️
I have to agree their brother more agile because it’s weight even in cutting 12 inch diameter wood nz
@oktay475
Жыл бұрын
Echo 520 öneririm
@elenagamboa4112 Жыл бұрын
Ojalá algún día yo pudiera tener una maquinita como la que tienen ustedes ahí para ser bella esas como las que ustedes hacen
@CsabiTools
Жыл бұрын
🙋♂️
@4shooters Жыл бұрын
sold, nice demo
@CsabiTools
Жыл бұрын
Thanks 😊
@roccobarca45582 жыл бұрын
Hello csabi,the new model fs561 is more stronger or less stronger than old model FS560? Or same Power? Thanks
@CsabiTools
2 жыл бұрын
Hello normally they have the same weight and power, but the new one Fs 561 I find it slightly faster ,🙋♂️
@roccobarca4558
2 жыл бұрын
@@CsabiTools ok thanks csabi
@bcde1101200921 күн бұрын
Top me manda uma para o Brasil aqui não tem essas duas 😮😮😮
@deni439 Жыл бұрын
Браво на вас
@CsabiTools
Жыл бұрын
🙋♂️
@ahmadakimullah1473 Жыл бұрын
2022👈💪🥰 TikTok 👈✨ aki 💁🏻♂️✨😁 like ahahaha 😂😜✌️
@CsabiTools
Жыл бұрын
🙋♂️
@keithienmason4643 Жыл бұрын
Their is a new trimmer head out there it is called auto speed feed trimmer head from Stihl fs56 RC string trimmer I don't know if it fits all the other Stihl weed eaters out there
@CsabiTools
Жыл бұрын
Hello, unfortunately it doesn’t fit on the bigger model,🙋♂️
@catapult01 Жыл бұрын
Good bro ❤️🤝 from Indonesia 🤝
@CsabiTools
Жыл бұрын
Thanks 😊, greetings
@dobbalinarasimha8830
Жыл бұрын
@@CsabiTools bridge cutter
@dobbalinarasimha8830
Жыл бұрын
Bhi
@theautisticarborist68462 жыл бұрын
What is the cutting width of the fs561 with the nylon cutters
@CsabiTools
2 жыл бұрын
Hello the cutting width is 480 mm in diameter.
@matthewheffernan3877
Жыл бұрын
@@CsabiTools way too small and way too slow only good if cutting very tough grass or reeds.
@nickjames2594 Жыл бұрын
I have an FS410 and the strimmer cord melts if I run at full revs for too long! Do I need to use better quality cord perhaps?
@CsabiTools
Жыл бұрын
Honestly to be , i never occurred that problem, you can try using different cord, if not try to take the machine in to a service,🙋♂️
@omaranguloarbildo7013 Жыл бұрын
Exelente
@CsabiTools
Жыл бұрын
Hello, thanks 😊
@GroundmaintenanceTv2 жыл бұрын
Thumps up 👍👍
@CsabiTools
2 жыл бұрын
Thanks, greetings 🙋♂️
@Gabi-tx9ffАй бұрын
Salut. acel turometru de unde lai cumparat si dack se poate monta pe orice motocoasa ?
@CsabiTools
Ай бұрын
Salut, te referi la capul cu fir durocut 40-4 ?
@viniciomorales78611 ай бұрын
Que tipo de hilo es y que cabezal, veo que es de 4 hilos
@CsabiTools
11 ай бұрын
Hello it’s called Stihl durocut 40-4 trimmer head with 4 mm trimmer line,🙋♂️
@viniciomorales786
11 ай бұрын
@@CsabiTools gracias
@thedien2588 Жыл бұрын
I like stihl fs 561 C
@CsabiTools
Жыл бұрын
🙋♂️
@captainsmokey9223 Жыл бұрын
What a powerful couple especially your girlfriend.
@CsabiTools
Жыл бұрын
Hello, thanks for the kind words,🙋♂️
@zedacruja681 Жыл бұрын
assisti o seus videos antes de comprar ,,ob rigid ja la vai uns 9 meses
@CsabiTools
Жыл бұрын
🙋♂️
@excafatorpalembangindonesia Жыл бұрын
Mesin yang sangat menarik dan membantu
@CsabiTools
Жыл бұрын
🙋♂️
@macammacamadagais8044 Жыл бұрын
Nice
@CsabiTools
Жыл бұрын
Thanks 😊
@judemcgarrell8910 Жыл бұрын
I want to buy a Fs 510 that’s the biggest it gets in my country and that’s a very powerful waka
@CsabiTools
Жыл бұрын
Hello yes also in my country is the biggest machine , I own the Fs 511 and it’s an amazing machine,🙋♂️
@santhamsantham4073 Жыл бұрын
Super
@CsabiTools
Жыл бұрын
Thanks 😊
@leonivic54732 жыл бұрын
Hi Csabi, I have fs560 and autocut 56-2 with that same nylon, but 3mm. When using full throttle within a few minutes, the surface of this nylon is PARTIALLY melted, ie baked (when using a 2mm nylon that comes with the head when purchased, then it is melted along its ENTIRE length). This is manifested in the fact that when I hit the ground with the cutting head, the nylon does not come out, and does not come out because it is melted. When I squeeze the gas and release it immediately and so on throughout the cutting, then it can last a longer time. When I cut wet grass, it can be seen that the moisture on the head evaporates due to the heat. What would be the advice, ie does this type of lubrication have a system error, because now, as I see fs561, it is exactly the same, it only has an added screw for lubricating the head, or is only my cutter defective or is it something else?
@CsabiTools
2 жыл бұрын
Hello, you are not the first person who tell me about this problem, honestly to be I don’t know why it’s melting the trimmer line, when it was the last time that you added grease into the gearbox of the brushcutter, I guess that it doesn’t have enough grease and that why it’s overheating, with my brushcutters I never occurred this problem. My opinion that you should take it into a service to check it out and add some grease, in the new model the Fs 561 after every 25 hours of work we have to ad 7-5 g grease into the gearbox. Greetings hope you will fix your brushcutter 🙋♂️
@lynnB3159
2 жыл бұрын
I have the same setup and find the 3.3mm square line works really well.
@mirsadokanovic1869
Жыл бұрын
DjsyeusueuhhduQ 000p
@robertpopescu6966
Жыл бұрын
jjhf
@yamasaki.design
2 ай бұрын
I'm glad I'm not the only person having this problem... your post is a couple of years old.. did you find a solution? I think I'm going to try the fix length line either the Stihl Durocut or the Oregon Jet-fit...
@marinosmarinos5584 Жыл бұрын
Hallo csabi from greece,can you see difference in consumption of gasoline between fs561and fs 490?to the same area ,time to clear?
@CsabiTools
Жыл бұрын
Hello with a full tank we work approximately the same amount of time, but the tank of Fs 561 it’s slightly bigger so the consumption it’s slightly higher,🙋♂️
@user-wm8to7hl2t
Жыл бұрын
@@CsabiTools Hi
@user-xd2pj1rv7s Жыл бұрын
Такая девушка красотка рядом!
@CsabiTools
Жыл бұрын
Thanks for the kind words,🙋♂️
@zedacruja681 Жыл бұрын
BESIDE the place to hang the machine wats the difference between the two?
@CsabiTools
Жыл бұрын
Hello here yo can find all the details kzread.info/dash/bejne/anaVq9eYadm9daQ.html
@sharukhmatekuki5830 Жыл бұрын
👍🏻👍🏻 🇮🇳 Kuki 19|06|2022
@CsabiTools
Жыл бұрын
Greetings,🙋♂️
@ukaszysakowski58952 жыл бұрын
👍👍👍💪💪💪👏👏👏
@CsabiTools
2 жыл бұрын
🙋♂️
@alexmaquinasherramientas2 жыл бұрын
👍🏻👍🏻👍🏻
@CsabiTools
2 жыл бұрын
🙋♂️
@moises-hr2dd Жыл бұрын
essa máquina e forte
@CsabiTools
Жыл бұрын
Yes indeed my friend,🙋♂️
@moises-hr2dd
Жыл бұрын
@@CsabiTools valeu
@vidademinijardineiro Жыл бұрын
Você tem uma roçadeira Stihl FS 300 ??
@CsabiTools
Жыл бұрын
🙋♂️
@MySireno Жыл бұрын
Solo corten de derecha a izquierda si cortan de regreso avientan la basura para delante y de esa forma se avanza menos y se cansa más los hombros ..lo ideal es derecha a izquierda abriendo más el compas de la maquina casi cerrando un círculo y avanza lo doble y más fino el corte
@CsabiTools
Жыл бұрын
Hello my friend, thanks so much for the advice, greetings,🙋♂️
@Traktor_Ngawi Жыл бұрын
Luar biasa 👍
@CsabiTools
Жыл бұрын
🙋♂️
@danielsvensson905 Жыл бұрын
Så jäkla bra
@CsabiTools
Жыл бұрын
🙋♂️
@user-yh3ik4th1u2 жыл бұрын
👍
@CsabiTools
2 жыл бұрын
🙋♂️
@PancinganUnik882 жыл бұрын
Nice frend
@CsabiTools
2 жыл бұрын
Thanks 🙋♂️
@Appytail Жыл бұрын
I tried Stihl trimmer line. To me it's no good. I'm back with Oregon line now.
@CsabiTools
Жыл бұрын
Ok , good luck with your trimmer line, greetings 🙋♂️
@jasoncarden92002 жыл бұрын
the hat is big too
@CsabiTools
2 жыл бұрын
🙋♂️
@elmundodetony9362 Жыл бұрын
Muy chulo el video,pero falta seguridad,,visera,gafas,manguitos para antebrazos,espinilleras,cascos para los oidos,,etc,,por lo demas muy bien😂🤣👍
@CsabiTools
Жыл бұрын
🙋♂️
@jesusmarquez3777 Жыл бұрын
Muy vien
@CsabiTools
Жыл бұрын
Thanks 🙋♂️
@johanericson18542 жыл бұрын
Hi ! How do you break in the motor on your brushcutters?or do you hit fulltrottle the first tank of gas?
@CsabiTools
2 жыл бұрын
Hello I don’t understand your question, you can say it in another way, thanks
@johanericson1854
2 жыл бұрын
I was woundering if run the egines at a lower rpm the first tanks of gas before you run the engines at maximum rpm all the time?
@CsabiTools
2 жыл бұрын
Yes I was thinking it’s about the engine, when I fill them up with gas for the first time I let it to run 10-15 min and after that with the first 2 fuel tanks i don’t run them at maximum rpm ,🙋♂️
@johanericson1854
2 жыл бұрын
Ok🙂 So after i have run my fs410cem i can run it at full rpm fore a tank of gas(under load)??
@johanericson1854
2 жыл бұрын
I ment after i have been runing it for 5 tanks of gas!!
@elmundodemynnor Жыл бұрын
Para ese monte casi seco lo mejor es la cuchilla y es mejor un protector de malla para la cara que ese protector que estorba en la parte de abajo
@CsabiTools
Жыл бұрын
Hello, thanks for the advice, greetings 🙋♂️
@tamilselvijayaseelan6481 Жыл бұрын
What type of rope using
@CsabiTools
Жыл бұрын
Hello, Stihl CF3-pro 3,3 mm trimmer line and 4 mm trimmer line,🙋♂️
@user-rn8rx6bu6u Жыл бұрын
Привет всем 🇷🇺 👍 👍💯
@CsabiTools
Жыл бұрын
🙋♂️
@lionelpereira1963 Жыл бұрын
😍😍😍
@CsabiTools
Жыл бұрын
🙋♂️
@alexandrobettio
Жыл бұрын
@@CsabiTools
@JoaoBatista-on8ts Жыл бұрын
Muito boa tenho uma
@CsabiTools
Жыл бұрын
🙋♂️
@adrianstefan232 жыл бұрын
👍👍👍✌
@CsabiTools
2 жыл бұрын
🙋♂️
@EvgenPokos2 жыл бұрын
🔥🔥🔥🔥👍👍👍🤘🤘🤘💪💪💪
@CsabiTools
2 жыл бұрын
🙋♂️
@thomasandersonparra3090 Жыл бұрын
Where is this place?
@CsabiTools
Жыл бұрын
Hello, we are living in Romania,🙋♂️
@thomasandersonparra3090
Жыл бұрын
O right
@josenonato4283 Жыл бұрын
Olá Brasil!👍
@CsabiTools
Жыл бұрын
🙋♂️
@franciscoroberto7042 Жыл бұрын
Nao se enganem! Com uma máquina desse peso e da forma como trabalham estão mortos em 15 minutos.
Пікірлер: 406
Неимоверно красивая природа в вашей стране! 🏡🌳🏡🌳🏡🌳🏡🏡🌳🏡🌳❤👍👍👍☺🖐
@CsabiTools
2 жыл бұрын
🙋♂️
@user-ft4sj1py9r
Жыл бұрын
@@arinakafyan6020 🌸🌻🌸🌻🌸💖👋
The new model is stronger than old model👍
@CsabiTools
2 жыл бұрын
Hello, yes it’s slightly stronger 🙋♂️
@sahraagresta1735
Жыл бұрын
lol
Buna ziua dl Csabi! Felicitari! Faina femeie, faina echipa! Sanatate va doresc si succes!
@CsabiTools
2 жыл бұрын
Buna domnu Cosmin, multumim mult de aprecieri, salutare asemenea iti doresc si tie 🙋♂️
@user-du5jo6gt7z
Жыл бұрын
0 U UCI 9
Very nice brushcutter I got a fs 280 well done
@CsabiTools
2 жыл бұрын
Thanks 😊, I have also a Fs 300 my oldest machine 🙋♂️
Thank you for the review in English.
@CsabiTools
2 жыл бұрын
Your welcome 🙋♂️
Very impressive! The only thing I concerned is about the safety while both of you demonstrating the machine. Mind your distance at least 25m away as if there any flying object might be dangerous. Again dont forget the basic PPE while operating such machine.
@CsabiTools
Жыл бұрын
Hello, thanks for the advice I totally agree with you, we dare to work so close to each other because I know the terrain and it’s very clean without no debris whatsoever, 🙋♂️
@machinesdequalite
6 ай бұрын
I work with these machines and I know how accidents happen with flying objects. The cameraman has been very brave to stand so close and in front. Never the operator should work so close and never one should use the machine facing another person. Glad nothing has happened.
@Sigurd651
5 ай бұрын
Agree 100%, more people should know this, im wishing a working face mask, and a triangular brush blade for christmas tomorow :D, Merry christmas btw, and i know from my line trimmer that with only glasses i sometimes get small stones, dirt and grass on my face, im 14, and i bought this used km 131 lately, and almost haven't used it but a litlle, and i won't use it again until i get a face mask :D @@machinesdequalite
Sziasztok! Tökéletes mind a kettő. Szuper gépek.
@CsabiTools
2 жыл бұрын
Hello, koszi szepen, udvozolek 🙋♂️
I LOVE WORKING STIHL BRUSCHCUTTER!!❤❤
@CsabiTools
2 жыл бұрын
Hello, yes you are right they are amazing machine, greetings 🙋♂️
@ukaszysakowski5895
2 жыл бұрын
@@CsabiTools THAT'S TRUE!! GET LUCKY.
so almost wonderful beautiful video friend i love it so much
@CsabiTools
Жыл бұрын
Hello my friend, thanks so much for the kind words, I’m glad that you like it,greetings,🙋♂️
@jvenema86
Жыл бұрын
@@CsabiTools yes it is my best friend can we talk from insta?
@CsabiTools
Жыл бұрын
@@jvenema86 yes , text me when you’re available.
@jvenema86
Жыл бұрын
@@CsabiTools i have text you
Excelente video. Pero es importante usar lentes o anteojos para realizar todo tipo de trabajo en estas máquinas. Ya que el golpe de la basura llega a los ojos. Saludos desde Guatemala
@CsabiTools
Жыл бұрын
Hello, thanks for the advice, I’m glad that you enjoyed the video, greetings 🙋♂️
@Andres66667
Жыл бұрын
@@CsabiTools ok
@babitapaullobmmynhn2221
Жыл бұрын
@@CsabiTools q
@babitapaullobmmynhn2221
Жыл бұрын
@@CsabiTools qqwqqqq
Stihl is a very good brand. But for this kind of work (meadow mowing), I would rather choose a lighter brushcutter with a smaller engine capacity, due to consumption and also less strenuous work. Alternatively, a different type of mower, not a brushcutter. The 10 kg weight of the brushcutter is crazy if you have to work with it for several hours a day. A good but also powerful brushcutter with high-quality components does not weigh more than 8.5 kg, ideally between 6 and 8 kg. I had a Stihl FS 450, but I sold it because compared to my second brushcutter at home - a 24-year-old Honda UMT 28 D, it had almost double the consumption and was also heavier. Honda mows everything like an STIHL but for less money. I would recommend buying these strongest STIHL brush cutters only to companies that use them every day for several hours (if they don't mind higher fuel consumption), or use them in the forest with a disc intended for that purpose. For regular users and households who mow the grass once every few days or weeks, as I do, while I mow 5 -7 hours a day, there are much better brush cutters, but with a smaller engine capacity (from 28 - to approx. 36 cc), precisely because of consumption and weight. I have had an excellent experience with Honda. Brush cutter maintenance is also important (mainly cleaning the air filter) and even more important is the correct oil ratio, I use red STIHL and especially high-octane E 5 gasoline. Especially in older brush cutters, never refuel or mix E 10 gasoline with a higher ethanol content of up to 10 % (alcohol). It destroys rubber hoses and various seals that were not adapted to it from the factory. I'm just filming and uploading parts of a service tutorial for my Honda brush cutter on KZread to my channel. I mix STIHL red oil and high-octane (100) E 5 in a ratio of 1 : 40 and I am very satisfied with the performance, super consumption, and also with the fact that my Honda brush cutter has been working for me motorically without problems for almost 25 years. I just had a problem with one rubber tube when I was refueling with new E10 gasoline for a while, which replaced Natural 95 gasoline at gas stations in Slovakia after 2020. After one rubber tube broke, I'm already refueling with a few cents more expensive, but much better quality gasoline E 5, with which the brushcutter has higher performance, lower consumption, and does not clog the fuel system. If I were to buy a Stihl again, so that I would like to use it every day, I would probably rather buy a smaller, but also professional STIHL FS 311, precisely because of better consumption and lower weight. Greetings from Slovakia.
@CsabiTools
8 ай бұрын
Hello, thanks for the advice, I agree with you, indeed the big machines are heavy but also when I go to work I can cut a lot more faster with them especially with the brush knife or with the trimmer heads, greetings from Romania,🙋♂️
@AdviceFromGarage
8 ай бұрын
@@CsabiToolsHello, and btw. thanks for the great video. Good luck :).
Another great video. Your English is getting very good! 👍🏼
@CsabiTools
2 жыл бұрын
Hello Adam, thanks ,greetings 🙋♂️
Wunderful girl planter🥰👏👏👏👏 i love sthil 🙋♂️
@CsabiTools
Жыл бұрын
Hello, thanks so much, greetings 🙋♂️
Impressive. I like them both but it looks like the durocut 44 with the 4 string head cuts the best. I’ve spent hours and hours cutting similar conditions with the FS250. That’s why I’m looking at the big boy model.
@CsabiTools
Жыл бұрын
Hello yes it’s cutting slightly better than the autocut, the only downside is that we have to change the trimmer line manually, 🙋♂️
@cristoferpereira6359
Жыл бұрын
No
@bambinopons3505
Жыл бұрын
@@CsabiTools the women 😍😍😍😘
@CsabiTools
Жыл бұрын
@@bambinopons3505 yes I know my girlfriend.
@matthewheffernan3877
Жыл бұрын
FS250 is brilliant machine so light so much power. Take the spark arrester out and it will go a little better too and won't carbon up. Take the guard off and get a speedfeed head it will be as faster in these conditions than these 560's with guards still fitted. but remove the guards from these 560's and they will be very fast The only issue with these big machines is they are slow to change directions from left to right as its a lot of weight. In short grass 250 is the faster machine.
Mucho cuidado que las espigas se convierten en proyectiles a 11000rpm, buen trabajo! 👏🏼👏🏼
@CsabiTools
Жыл бұрын
Hello, thanks, greetings 🙋♂️
Both brush cutters are very fast and have great power
@CsabiTools
5 ай бұрын
Yes indeed the most powerful machines from Stihl,🙋♂️
@Brush_Cutter_Man
5 ай бұрын
@@CsabiTools 👍
I can see 3 gorgeous machines 😅
@CsabiTools
6 ай бұрын
Yes indeed 😂😂😂
He's a professional lawn mower.
@CsabiTools
Жыл бұрын
Hello, not yet but it’s learning fast,🙋♂️
Super brawo na koszacej Pani nawet nieźle jej to koszenie idzie Lab bo Pan to profesja nic dodać nic ująć ja mam kosę sthil FS 260 Nimi marzeniem jest mieć kosę FS 550 super robota 🇲🇨🇲🇨👍👍👒👒Laleczki i pozdrowionka od Rafała z Polski a zaraz się zabieram za oglądanie Pana filmy o pile akumulatorowej👍
@CsabiTools
2 жыл бұрын
Hello, greetings from Romania 🙋♂️
unstoppable. well done. just dont wipper snip ya missus
@CsabiTools
Жыл бұрын
🙋♂️
Good job ❤❤❤ nice grass kat. KAMAWER VLOG TV
@CsabiTools
Ай бұрын
Thank you! 🤗
Super magnifique boulot
@CsabiTools
Жыл бұрын
Merci beaucoup,🙋♂️
@remidarque8105
Жыл бұрын
Derien moi je taf en espace vert aussi
Esssa máquinas são muito ótimas não vejo a hora de comprar a minha 460 da stihl
@CsabiTools
9 ай бұрын
Hello, yes indeed they are really good machine’s,🙋♂️
I use a rotor blade Or a disk blade and I clear very thick mini trees. Our machine is 12 years old and the other is a couple of months old and work
@CsabiTools
Жыл бұрын
🙋♂️
That's very very strong my friend 💪💪💪💖🇵🇭
@CsabiTools
Жыл бұрын
Hello, thanks so much my friend, greetings 🙋♂️
Szia Csabi ! Nagyon jónak tűnik a 40/4 damilfej ! Az idén már nem, de jövőre beszerzek egyet ! Köszi a videót👍
@CsabiTools
2 жыл бұрын
Szia Andras, igazad mongyam engem is meglepet nagyon jol ment à 40-4 damilfej, szivesen udvozolek 🙋♂️
@andrasorosz566
2 жыл бұрын
@@CsabiTools Köszönöm 👍
Excelente que las mujeres aprendamos atrabajar con estas maquinas en el campo.
@CsabiTools
Жыл бұрын
Hello, thanks greetings 🙋♂️
Those are two impressive units. Ashame they’re as expensive as they are
@CsabiTools
Жыл бұрын
Hello, yes indeed they are expensive,🙋♂️
Very nice stihl
@CsabiTools
Жыл бұрын
Thanks, greetings 🙋♂️
Motocoasele astea sunt ale tale sunt super bune
@CsabiTools
Жыл бұрын
Salutare, da sant motocoasele mele, da sant foarte multumit de ele,🙋♂️
@claudiaaugustin6909
Ай бұрын
❤😢😢😮😅😊
Good job 👌
@CsabiTools
Жыл бұрын
Thanks 😊
У девушки красивая фигура
@CsabiTools
9 ай бұрын
🙋♂️
Good review but notice the machines are at maximum revs and basically at low load. This is like driving your car in 1st gear on the highway. You will get there eventually but its slow. With that much power you need to take the guard off and let the string out a lot more. You should be able to cut a 600mm swath maybe more depends on how the string behaves. I go until it starts to wrap around the head and then i know I've gone 1 bump too many. I cut farm hills for up to 8 hours at a time. I don't have time to be cutting with those silly push in strings. They wear down and then you are only cutting 400mm then you have to stop and put new ones in again. I carry heaps of extra line and a speed feed head. Keep bumping it and maintaining huge cutting path.
@CsabiTools
Жыл бұрын
Hello, thanks for the advice , I agree with you the machine indeed it’s at maximum revs, me personally I like to cut the grass always with the deflector on ,now for this big machine like in the video I have a new guard with a bigger cutting diameter ( 480 mm ) , if the grass it’s big and thick even with this big machine it will be a struggle to cut without guard and like you said 600 mm I think it’s too much in big and thick grass, smaller grass I think it can handle it, greetings,🙋♂️
good job
@CsabiTools
6 күн бұрын
Thanks 😊
Bravo boss ! Subscribed !
@CsabiTools
2 жыл бұрын
Salutare, multumesc,🙋♂️
Muy bien pareja, que bien lo hacéis, muy coordinados, mejor trabajar en compañía, felicitaciones un saludo
@CsabiTools
Жыл бұрын
🙋♂️
Eu trabalhei com o meu 45 minutos mais ou menos depois despejei a gasolina toda e deixei ele ao relantim ate que a gasolina termina e agora ja esta sem trabalhar faz em novembro 2022 um ano.sera que vai acontecer alguma coisa de mal ao motor.falo do stihl 560 em Portugal
Salve bei mezzi forever stihl la ragazza a l'inizio lasciava l'erba 🤣🤣🤣 bel lavoro 🙋♂️❤💯😎🇮🇹
@CsabiTools
2 жыл бұрын
Hello, thanks for the kind words, greetings 🙋♂️
@alexandrobettio
Жыл бұрын
@@CsabiTools
Девушка просто шикарная!
@CsabiTools
Жыл бұрын
Thanks so much,🙋♂️
Eu tenho uma rossadeira FS80 essas rossadeiras são ótimas pra serviço pesado!
@CsabiTools
Жыл бұрын
Hello,🙋♂️
Nice Stihl
@CsabiTools
Ай бұрын
Thanks 😊
Lucky man! Best tools and a real woman! I envie you!
@CsabiTools
Жыл бұрын
Hello, thanks for the kind words, greetings 🙋♂️
Recently I bought a sthl fs 120 😊
@CsabiTools
2 ай бұрын
Good luck with your purchase, greetings 🙋♂️
nice video my friends
@CsabiTools
Жыл бұрын
Thanks, greetings 🙋♂️
Tohle mě hodně moc baví, ať se daří.
@CsabiTools
Жыл бұрын
Thanks so much, greetings,🙋♂️
Szia! Megéri beruházni az Fs 560/561-re esetleg? Nekem egy fs 460 van, elég gyakran használom, bozótvágástól megkezdve nagyobb területek kaszálásáig. Az 560-sok nem túl nehezek már? Erőben annyival meggyőzőbb?
@CsabiTools
Жыл бұрын
Hello az igazsag hogy sokal erosebb es nehezeb egy Fs 560/561 , ha sokat fogsz vele dolgozni megeri mert sokal erosebb es nagyob keseket rakhatsz a gepre es hamarab fejezed be a melot…….. ezt te magadnak kel eldonteni ha megeri, 🙋♂️
Gostava de ver uma demonstração de corte em silvas e giestas, este tipo de trabalho qualquer máquina de potência média faz.
@CsabiTools
Жыл бұрын
Hello, check out my channel, I have multiple videos with different machines, ,🙋♂️
@mariusbucur5164
Жыл бұрын
@@CsabiTools iq
Good video
@CsabiTools
2 жыл бұрын
Hello, thanks greetings 🙋♂️
Semangat master 🇮🇩
@CsabiTools
Жыл бұрын
🙋♂️
This machine don't cut grass, they vaporize it ! ! ! 😂 I own the FS 460 machine and i can say its really the most polyvalent machine from Stihl with very good confort and consumption, i'm sure that with the new stihl harness Xtreem i could cutting grass all day long without effort. 560/561 are really "beast' for forestry and very hard task, nothing my brushcutter can't do, but, less easier !
@CsabiTools
Жыл бұрын
Hello, I totally agree with you the Fs 460 it’s one of my favorite machine and yes the Fs 560- 561 are real beast, 🙋♂️
@stivenperez2555
Жыл бұрын
Bap2i21h9iaw20kwwjwquq0iwhpm202oejsmkJzjlskzkokkskmamaMmmmllkkllmkm
@baldyedwards1453
Жыл бұрын
I have to agree their brother more agile because it’s weight even in cutting 12 inch diameter wood nz
@oktay475
Жыл бұрын
Echo 520 öneririm
Ojalá algún día yo pudiera tener una maquinita como la que tienen ustedes ahí para ser bella esas como las que ustedes hacen
@CsabiTools
Жыл бұрын
🙋♂️
sold, nice demo
@CsabiTools
Жыл бұрын
Thanks 😊
Hello csabi,the new model fs561 is more stronger or less stronger than old model FS560? Or same Power? Thanks
@CsabiTools
2 жыл бұрын
Hello normally they have the same weight and power, but the new one Fs 561 I find it slightly faster ,🙋♂️
@roccobarca4558
2 жыл бұрын
@@CsabiTools ok thanks csabi
Top me manda uma para o Brasil aqui não tem essas duas 😮😮😮
Браво на вас
@CsabiTools
Жыл бұрын
🙋♂️
2022👈💪🥰 TikTok 👈✨ aki 💁🏻♂️✨😁 like ahahaha 😂😜✌️
@CsabiTools
Жыл бұрын
🙋♂️
Their is a new trimmer head out there it is called auto speed feed trimmer head from Stihl fs56 RC string trimmer I don't know if it fits all the other Stihl weed eaters out there
@CsabiTools
Жыл бұрын
Hello, unfortunately it doesn’t fit on the bigger model,🙋♂️
Good bro ❤️🤝 from Indonesia 🤝
@CsabiTools
Жыл бұрын
Thanks 😊, greetings
@dobbalinarasimha8830
Жыл бұрын
@@CsabiTools bridge cutter
@dobbalinarasimha8830
Жыл бұрын
Bhi
What is the cutting width of the fs561 with the nylon cutters
@CsabiTools
2 жыл бұрын
Hello the cutting width is 480 mm in diameter.
@matthewheffernan3877
Жыл бұрын
@@CsabiTools way too small and way too slow only good if cutting very tough grass or reeds.
I have an FS410 and the strimmer cord melts if I run at full revs for too long! Do I need to use better quality cord perhaps?
@CsabiTools
Жыл бұрын
Honestly to be , i never occurred that problem, you can try using different cord, if not try to take the machine in to a service,🙋♂️
Exelente
@CsabiTools
Жыл бұрын
Hello, thanks 😊
Thumps up 👍👍
@CsabiTools
2 жыл бұрын
Thanks, greetings 🙋♂️
Salut. acel turometru de unde lai cumparat si dack se poate monta pe orice motocoasa ?
@CsabiTools
Ай бұрын
Salut, te referi la capul cu fir durocut 40-4 ?
Que tipo de hilo es y que cabezal, veo que es de 4 hilos
@CsabiTools
11 ай бұрын
Hello it’s called Stihl durocut 40-4 trimmer head with 4 mm trimmer line,🙋♂️
@viniciomorales786
11 ай бұрын
@@CsabiTools gracias
I like stihl fs 561 C
@CsabiTools
Жыл бұрын
🙋♂️
What a powerful couple especially your girlfriend.
@CsabiTools
Жыл бұрын
Hello, thanks for the kind words,🙋♂️
assisti o seus videos antes de comprar ,,ob rigid ja la vai uns 9 meses
@CsabiTools
Жыл бұрын
🙋♂️
Mesin yang sangat menarik dan membantu
@CsabiTools
Жыл бұрын
🙋♂️
Nice
@CsabiTools
Жыл бұрын
Thanks 😊
I want to buy a Fs 510 that’s the biggest it gets in my country and that’s a very powerful waka
@CsabiTools
Жыл бұрын
Hello yes also in my country is the biggest machine , I own the Fs 511 and it’s an amazing machine,🙋♂️
Super
@CsabiTools
Жыл бұрын
Thanks 😊
Hi Csabi, I have fs560 and autocut 56-2 with that same nylon, but 3mm. When using full throttle within a few minutes, the surface of this nylon is PARTIALLY melted, ie baked (when using a 2mm nylon that comes with the head when purchased, then it is melted along its ENTIRE length). This is manifested in the fact that when I hit the ground with the cutting head, the nylon does not come out, and does not come out because it is melted. When I squeeze the gas and release it immediately and so on throughout the cutting, then it can last a longer time. When I cut wet grass, it can be seen that the moisture on the head evaporates due to the heat. What would be the advice, ie does this type of lubrication have a system error, because now, as I see fs561, it is exactly the same, it only has an added screw for lubricating the head, or is only my cutter defective or is it something else?
@CsabiTools
2 жыл бұрын
Hello, you are not the first person who tell me about this problem, honestly to be I don’t know why it’s melting the trimmer line, when it was the last time that you added grease into the gearbox of the brushcutter, I guess that it doesn’t have enough grease and that why it’s overheating, with my brushcutters I never occurred this problem. My opinion that you should take it into a service to check it out and add some grease, in the new model the Fs 561 after every 25 hours of work we have to ad 7-5 g grease into the gearbox. Greetings hope you will fix your brushcutter 🙋♂️
@lynnB3159
2 жыл бұрын
I have the same setup and find the 3.3mm square line works really well.
@mirsadokanovic1869
Жыл бұрын
DjsyeusueuhhduQ 000p
@robertpopescu6966
Жыл бұрын
jjhf
@yamasaki.design
2 ай бұрын
I'm glad I'm not the only person having this problem... your post is a couple of years old.. did you find a solution? I think I'm going to try the fix length line either the Stihl Durocut or the Oregon Jet-fit...
Hallo csabi from greece,can you see difference in consumption of gasoline between fs561and fs 490?to the same area ,time to clear?
@CsabiTools
Жыл бұрын
Hello with a full tank we work approximately the same amount of time, but the tank of Fs 561 it’s slightly bigger so the consumption it’s slightly higher,🙋♂️
@user-wm8to7hl2t
Жыл бұрын
@@CsabiTools Hi
Такая девушка красотка рядом!
@CsabiTools
Жыл бұрын
Thanks for the kind words,🙋♂️
BESIDE the place to hang the machine wats the difference between the two?
@CsabiTools
Жыл бұрын
Hello here yo can find all the details kzread.info/dash/bejne/anaVq9eYadm9daQ.html
👍🏻👍🏻 🇮🇳 Kuki 19|06|2022
@CsabiTools
Жыл бұрын
Greetings,🙋♂️
👍👍👍💪💪💪👏👏👏
@CsabiTools
2 жыл бұрын
🙋♂️
👍🏻👍🏻👍🏻
@CsabiTools
2 жыл бұрын
🙋♂️
essa máquina e forte
@CsabiTools
Жыл бұрын
Yes indeed my friend,🙋♂️
@moises-hr2dd
Жыл бұрын
@@CsabiTools valeu
Você tem uma roçadeira Stihl FS 300 ??
@CsabiTools
Жыл бұрын
🙋♂️
Solo corten de derecha a izquierda si cortan de regreso avientan la basura para delante y de esa forma se avanza menos y se cansa más los hombros ..lo ideal es derecha a izquierda abriendo más el compas de la maquina casi cerrando un círculo y avanza lo doble y más fino el corte
@CsabiTools
Жыл бұрын
Hello my friend, thanks so much for the advice, greetings,🙋♂️
Luar biasa 👍
@CsabiTools
Жыл бұрын
🙋♂️
Så jäkla bra
@CsabiTools
Жыл бұрын
🙋♂️
👍
@CsabiTools
2 жыл бұрын
🙋♂️
Nice frend
@CsabiTools
2 жыл бұрын
Thanks 🙋♂️
I tried Stihl trimmer line. To me it's no good. I'm back with Oregon line now.
@CsabiTools
Жыл бұрын
Ok , good luck with your trimmer line, greetings 🙋♂️
the hat is big too
@CsabiTools
2 жыл бұрын
🙋♂️
Muy chulo el video,pero falta seguridad,,visera,gafas,manguitos para antebrazos,espinilleras,cascos para los oidos,,etc,,por lo demas muy bien😂🤣👍
@CsabiTools
Жыл бұрын
🙋♂️
Muy vien
@CsabiTools
Жыл бұрын
Thanks 🙋♂️
Hi ! How do you break in the motor on your brushcutters?or do you hit fulltrottle the first tank of gas?
@CsabiTools
2 жыл бұрын
Hello I don’t understand your question, you can say it in another way, thanks
@johanericson1854
2 жыл бұрын
I was woundering if run the egines at a lower rpm the first tanks of gas before you run the engines at maximum rpm all the time?
@CsabiTools
2 жыл бұрын
Yes I was thinking it’s about the engine, when I fill them up with gas for the first time I let it to run 10-15 min and after that with the first 2 fuel tanks i don’t run them at maximum rpm ,🙋♂️
@johanericson1854
2 жыл бұрын
Ok🙂 So after i have run my fs410cem i can run it at full rpm fore a tank of gas(under load)??
@johanericson1854
2 жыл бұрын
I ment after i have been runing it for 5 tanks of gas!!
Para ese monte casi seco lo mejor es la cuchilla y es mejor un protector de malla para la cara que ese protector que estorba en la parte de abajo
@CsabiTools
Жыл бұрын
Hello, thanks for the advice, greetings 🙋♂️
What type of rope using
@CsabiTools
Жыл бұрын
Hello, Stihl CF3-pro 3,3 mm trimmer line and 4 mm trimmer line,🙋♂️
Привет всем 🇷🇺 👍 👍💯
@CsabiTools
Жыл бұрын
🙋♂️
😍😍😍
@CsabiTools
Жыл бұрын
🙋♂️
@alexandrobettio
Жыл бұрын
@@CsabiTools
Muito boa tenho uma
@CsabiTools
Жыл бұрын
🙋♂️
👍👍👍✌
@CsabiTools
2 жыл бұрын
🙋♂️
🔥🔥🔥🔥👍👍👍🤘🤘🤘💪💪💪
@CsabiTools
2 жыл бұрын
🙋♂️
Where is this place?
@CsabiTools
Жыл бұрын
Hello, we are living in Romania,🙋♂️
@thomasandersonparra3090
Жыл бұрын
O right
Olá Brasil!👍
@CsabiTools
Жыл бұрын
🙋♂️
Nao se enganem! Com uma máquina desse peso e da forma como trabalham estão mortos em 15 minutos.
@CsabiTools
Жыл бұрын
🙋♂️