Another great video! I just followed your step-by-step instructions to remove my E50 engine from a Puch Maxi. The only difficulty was removing that stubborn throttle cable - I couldn't figure it out... I simply skipped that step and removed the (13mm) engine bolts. Once the engine was loose, I popped off the round thingy from the engine. What a PITA! Once I removed the engine I degreased it with degreaser cleaner, a small stiff brush and air from my compessor. Ready to rebuild tomorrow! Thanks!

I bought my first moped, it's a Puch Maxi. This video helped a lot. I watched a section, paused it, finished the task, then hit play. Follow this 100% and you'll have an engine separate from the bike. Also, some people drain the ATF first, but it doesn't matter just long as it is drained at some point. Good video, dude!

Don't you just love people who post instructional videos and never answer a question?

Travis, Thanks tons for all the vids! I just picked up a Maxi...and have had a lot more confidence doing the restore thanks to your step by step vids. I'm planning to repaint the frame. So, I'm really glad you posted this engine dropping vid as well.

Thank you for the tutourial. It helped me alot. I now know how easy it is to work with puch maxis and i just got my own

Thanks man, already kind off knew how to get it off but watched your video for tips. Bought my second Puch today this one without a license plate and man it is dirty and missing some parts. But can't say much since I almost got it for free.

best tutorial video iv watched, hands down, THANKS

Well thank you! The moped is also getting new tires sometime in the next few weeks, I should be able to put a video together.

This is great, I have a similar bike, and I am completely new at this kind of thing.

Joe Pasquarello It's something I've been trying to get better at. This video comment section doesn't look particularly great because I can't reply to comments made before the Google+ integration. I guess the larger question is if someone uploads a video two years ago and has 80 other videos are they required to regularly comb the comments on all of them? I make videos to try and help people, and freely admit that I'm no expert on 2 strokes, so I'd rather let the community here contribute or have the person go to a forum/facebook group where they could get an answer if I don't know it.

Awesome video... cracking up the whole time...

What I wanna know is why they put the kickstand on the motor? Whose bright idea was that? Might as well biolt it to the handlebars.

That is something I am learning right now, the process is called knarping your cable because you cut the end off to shorten them and then either screw or solder a new knarp in - probably not for a while, but once I get it down I will definitely make a video of it. Tire changing ones are uploading as we speak!

Can you do a tutorial on how to remove pedals and pedal arms? I am having problems removing one of my pedals and one of the arms. Thank you

Can you make a video of putting an new cillinder in a puch maxi That would be nice

very helpful. Thank you for posting.

I see now where that starter cable goes into.that top piece where the cable is hook into is missing.looks like it crack off.where can I find this part?

I have a puch Maxi - s. And its engine E50. What is the best engine that can replace him ?

Hey I can’t find anything about this but I’m having trouble removing the shields on my bike and I just wanted to know if i need a tool to get the “screws” off? Or am i supposed to pull it off?

Do you think that motor will fi a jawa babetta 207

We bought a MKII a year ago in Georgia and my gf cousin took it apart and it took a year fo.r them and later her brother to send us the parts. We are finally trying to rebuild it and I didn't see them take it apart this is the first time even touching this bike. But because it took so long I bought another frame. So Im going to try use your video to put the engine IN hopefully I can even though mine is the za50. Thinking of putting the tires on first to put the engine on. Do you have any advice for a first time builder? I think I need to possibly clean out the tank first before I put the engine on though right?

@TravisTutorial

9 жыл бұрын

Depends how far you want to go, MopedLarry's guide is always a good step, linked below. For a ZA50 the clutch cable will be different, and I highly recommend you replace the shift pucks as those tend to dry out. I always like to get it running first then focus on cosmetics, I find it gives me motivation. www.mopedarmy.com/wiki/Moped_Restoration_Checklist

can this be done without taking the exhaust off?

Very helpful! thanks!

keep it up, maybe a tutorial where you could explain all the parts and what they are jused for that would really help if you want to

Thank you for this!

@TravisTutorial

3 жыл бұрын

Glad it was helpful!

If you slack the chain by releaving the tensioner on the rear wheel axle, your can slack the cahing and not have remove the master link

Thinks so much for the video

LOVE the mustache! Hey do you have a tire changing vid?

@carstenaagaard2825

3 жыл бұрын

17"

why you remove the engine?

Did it with the kickstand down and held engine with left hand lol

u why do u got an extarnal coil an puch dsnt have an external coild it looks lame the puch,s moppeds dsnt have it so why ????/

thx man!!

Hay , instead of breaking the chain - remover the c-clip of the front sprocket and remover the sprocket. Much easier on your fingers

Dave Growl Foo Fighters! Danda says Hi!

ابحث عن لوازم دراجة النارية بيش أن في انتظر شكرا

Hey Travis, i've got a short question. So i removed my E50-engine a few days ago. You know the second cable at the clutch? It't the cable which is connected to the spark plug. Is it normal that this cable is made of two cables? oO I can't get them together,.. they look kinda ruptured.

why that fake mustage ?

Nice maxi N only to bad it is not the original motor (i guess)

@TravisTutorial

9 жыл бұрын

Medemblikker The numbers on the motor actually match the VIN stamped on the bike so this motor is original to the bike.

👍👍👍👍👍👍 TOP👍👍👍👍👍👍

Do you need paper work to ride this bikes?

@SDsailor7

5 жыл бұрын

It depends where you live.

very cool, im still not allowed to buy one :)

never pull on a wrench. it would have been easier and safer if you pushed down on he engine mounts.

puch e50 automatic dont have a 2speed.. its autoimatic

@dowrow6898

5 жыл бұрын

Automatics have speeds too, not all automatics are CVTs

why you musash?

is there a way I can contact u

@TravisTutorial

8 жыл бұрын

+JohnSlade1989baby Sure, leave a comment below mine here

@JohnSlade1989baby

8 жыл бұрын

+TravisTutorial not to be wierd but I have a lot to ask and say lol I didn't know if maybe a facebook or anything if you dont want to put your name on blast on here you can search me

@JohnSlade1989baby

8 жыл бұрын

+TravisTutorial just something quicker lol

@TravisTutorial

8 жыл бұрын

JohnSlade1989baby Try me, I'm pretty quick about getting back on here

@JohnSlade1989baby

8 жыл бұрын

+TravisTutorial lol ok do you still post videos if I need a walkthrough....your videos are by far my favorite

Take stache.

fake stash!! lol

why that fake mustage ?