I don’t see any reason how this is the perfect kit for a comp kit amazing steering! Forward bias motor weight titanium links, shaft,chub,knuckles machined gears, and any scx10ii part will fit on to it. Amazing review buddy!

SSD has been stepping up.They make really good products I think. I have used lots of their parts to build a couple of my rigs.

@hemistormrc

5 жыл бұрын

There really isn't a single part in the box that wasn't what I hoped it would be. Very nicely executed, and great instructions to boot.

Thank you for not wasting our time with the bags and box.

@hemistormrc

5 жыл бұрын

You are welcome!

Love this video Chris every video you post is very informative and entertaining!!! PLEASE KEEP MAKING VIDEOS!!!!!

@hemistormrc

5 жыл бұрын

I promise I will, I'm glad you enjoy them!

Do the Proline Ambush body. You might be the only person that can make that thing look good.

@hemistormrc

5 жыл бұрын

I see a challenge!

Awesome to see you back with a rc video Chris! Kit is now much better than I thought after seeing this video! Thanks mate :-)

@hemistormrc

5 жыл бұрын

You are most welcome, Richard! I hope you are well and enjoying summer!

Awesome as always Chris. That kit looks fantastic

@hemistormrc

5 жыл бұрын

Up close, even more impressive! Thank you for all the kindness!

I'm so glad you are feeling better, great video as always.

@hemistormrc

5 жыл бұрын

Thank you!

Yeah that's awesome Chris !! As always enjoy all your videos.

So happy to see you making videos again. Keep them coming.

@hemistormrc

5 жыл бұрын

Will do, Will!

Keep up the great work Chris! I’ve been watching your videos for years now. Always top notch.

@hemistormrc

5 жыл бұрын

I really appreciate the continued support, Dan! Thank you!

Glad to finally have you back my man, great video! Looking forward to many more!

@hemistormrc

5 жыл бұрын

So am I, Jay! I still have a lot of fun making these.

Great review, can't wait to see what you build out of it.

@hemistormrc

5 жыл бұрын

Going to be fun for sure!

Hey man, welcome back. I have missed your videos. I have been forced to build my own stuff and record it to pass the time. Hope everything is ok with you.

@hemistormrc

5 жыл бұрын

All is well, been a very busy year, with some more busy months ahead. But I'm feeling fantastic. Thank you very much for staying patient with me!

Do what your doing i can see your energy is excellent, plus I'm sure winter we will see more videos. I just cycled the bay trail from Fairfield to vallejo to San Francisco. Detoured at this amazing park in Oakland. Cycling videos are appreciated too

@hemistormrc

5 жыл бұрын

That sounds like a sweet trip! Way more vids coming indeed, thank you for sticking around!

Looks like an amazing kit. Can't wait until to see your complete build👍👍

@hemistormrc

5 жыл бұрын

Feels amazing too, very tight with almost no slop.

We see so many Jeeps, Land Cruisers, Land Rovers, Toyota pickups....and they're all good. Not specifically from you, just the hobby in general. Maybe something along the lines of a first gen Bronco? First gen Land Cruiser 4 door (can't recall the model number)? Something a bit less common. That chassis is really cool and deserves a equally cool, unique body. Just my opinion. Anything that you build is going to be awesome I'm sure!

That's a cool looking build kit, great review.

Fantastic video! Just in time too. I've been waiting to see a review on this kit as I'm trying to decide what to buy for my next project. Everything looks great, except the price. That's a bit hard to swallow for a builders kit that still needs a body, electronics and more. However I do understand why it costs what it does. It's very nice and needs no upgrading. Thank you for all of your efforts to provide us with great information and entertainment! Well done!

Looks like companys are upping their game.

Great video Chris! Good honest opinion about the kit is always appreciated! 😁

@hemistormrc

5 жыл бұрын

Thanks Brad! I think you are having a lot of fun building your VS410Pro, slightly jealous here! :)

@bradcowart5044

5 жыл бұрын

HemiStorm RC - Custom RC builds, painting videos and more . You will probably purchase one before to long and make it look awesome!

Thanks for the video. Thinking about making this my first kit build!

@hemistormrc

4 жыл бұрын

You will be in for a treat, this was an exceptionally nice chassis to assemble.

Nice run down. The vehicle itself looks pretty darn impressive.

@hemistormrc

5 жыл бұрын

It is so packed with cool features that it's hard to go over all of them in one video. Thank you for watching!

Looks like a awesome kit...keep up the great videos...

@hemistormrc

5 жыл бұрын

Thank you for stopping by, Tom!

Well said and spot on as usual! Gonna pick one up soon!

@hemistormrc

5 жыл бұрын

You will have fun putting it together, guaranteed.

Chris nice to see you back, hope all is well. Joe Cam

Awesome video definitely think that's a wicked build would be a cool one to get

That is a very nice looking kit great video today

Very nice kit Chris 👍👍

@hemistormrc

5 жыл бұрын

It sure is, Dean! Nice to see another very well thought out option hitting the shelves.

That is a very nice looking kit, after watching this video i have a better opinion of it. It seems like it has not gotten that much attention and that is kind of sad. Glad you took the time to do a review of it and get the word out on how good it is.

@hemistormrc

5 жыл бұрын

Hi Rich, it deserves all the attention it can get because it really is a good kit. Amazing parts, clear instructions, just a very understated box. Unfortunately. Thank you so much for watching!

@Stickies72

5 жыл бұрын

@@hemistormrc Have been a fan for several months now ever since i got back into RC after many years away. Am a big fan of you painting since i too am a rattle can fan. As always keep up the great work and keep the videos coming. One last thing, that playhouse is awesome :)

Chris, you have a commanding presence and charisma, you would do well in action movies! keep up the awesome informative reviews!

Great video, thanks! Nice run through if the chassis! As far as a body, RC4WD 1985 Toyota 4Runner with an interior since scale is the name of the game with that chassis!

As always love the honestly, never did understand the appeal of open boxes videos either. Way to show off a product that might otherwise get skipped over.

I will try to find the followup to this. Look forward to seeing what Body you decided on!! 😁 Carmine ✈🚂🚙

Bedankt voor de review Chris. Beetje prijzig maar zitten leuke features op. Nu nog een leuke body erop. Dan zien hoe die zich verhoud in de vrije natuur :D Goed werk! Thank you for the review Chris. Slightly pricey but with nice features. Now a nice body on it. Then see how it goes into nature: D Good work!

I can’t wait to see how you finish this one up.

@hemistormrc

5 жыл бұрын

Me neither, hahaha!

I challenge you to take on a Manitou Liu 3d printed hard body Chris!

@tommyhammel

4 жыл бұрын

Scale Builder's Guild although carborated a v8 would be odd

2 videos in one week. Welcome back 🤘

@hemistormrc

5 жыл бұрын

Thank you!

It would be cool to see a wood bed on the rig. Haven't seen the x crave do its thing in a while.

@hemistormrc

5 жыл бұрын

Will use it to the fullest once moved!

Thanks

Nette video Chris!

no rush get those ducks trained will be here.

Great to see ya back, that truck looks cool can’t wait to see what you do with it, what about some kind of hard body for it, keep the videos coming 👍

I missed that intro. Glad to see a new vid. 🤙🏻

@hemistormrc

5 жыл бұрын

Happy to see you stopping by, thank you!

Great job chris

@hemistormrc

3 жыл бұрын

Cheers Terry!

I saw SSD and immediately thought you were talking about a solid state drive ROFL

Waiting for mine to show up, going with an Axial 2012 JK Rubicon Unlimited body with the cage, hard top, and poison spider fares. Undecided other than that lol

@hemistormrc

5 жыл бұрын

Sounds like a nice shell for it! You will have a blast building it, guaranteed!

Nice Chris!

@hemistormrc

5 жыл бұрын

Thanks Wizz! :)

It looks awesome brother,,,Awesome job bro 🇵🇷

@hemistormrc

5 жыл бұрын

Thanks Charlie! I hope you are well!

@operation11charlieinc

5 жыл бұрын

@@hemistormrc Hooah brother

I run this style transmition I hated how it went together, until I learned how to mesh it. you kinda have to go as central as possible with the pinion then put it back together and listen to how it runs. then if it sounds like it isn't there take it apart and adjust the motor on the motor mount. the key is to get it as central as possible. the all metal casing version has proven to be the strongest transmition I've ever ran. I've never needed to try a different pinion as the gearing seems to be spot on for scaling.. I just use different motors for different amounts of wheelspeed/ torque with this set up if I really need to change things.

@hemistormrc

5 жыл бұрын

Hi Mike, that is great to know as that's exactly what I did when assembling. Good to know it has been such a strong performer. Again, I appreciate the info. Have a great weekend!

@mikecoaker5133

5 жыл бұрын

@@hemistormrc thanks bro and you

The Proline Dodge Power Wagon body would be cool.

@hemistormrc

5 жыл бұрын

I might have one somewhere! Thanks Doug!

Great l looking kit👍

@hemistormrc

5 жыл бұрын

Always good to see you stop by!

I've missed you bro!! Glad to see you doing alright still. Haha smooth bottom 🤭 keep it coming take care

@hemistormrc

5 жыл бұрын

I missed being here! Great to be back!

Nice kit:)! missed you at axial Fest this year brother

@hemistormrc

5 жыл бұрын

I missed being there, hopefully next year! Did you run the 5k again?

@00godlovesus

5 жыл бұрын

Yes sir it was easier this year than last year:)

Looks like a sweet setup. I just finished the element rc kit. Will have to try this one next time cash allows.

@hemistormrc

5 жыл бұрын

Nice! How did it go together for you?

@RCPropaganda

5 жыл бұрын

@@hemistormrc so far so good. But you hinted on plastic quality and in the element kit, a part on the c hub did crack while tightening a screw. I was careful but it did crack little. other wise kit is nice. Can not wait to get it running. Electronics and body will be in any day now. 👊👊✌

Haha crap like this, I have that shirt lol! Can't wait to see you cutting the tape and shaking the cans man!

Would really like to see what the Gmade Buffalo body would look like on this SSD Trail King.

Thanks! I was very curious about this kit...love to see a blazer on that..have you ever considered a hard body?..it would be cool to see you paint one up.

@hemistormrc

5 жыл бұрын

Hi Peter! I have done a couple in the past, they are fun but also very time consuming. Will do another one when the shop is all done!

Thanks for the vid yo!

@hemistormrc

5 жыл бұрын

You are very welcome, thank you for checking it out!

Your rear driveshaft is out of phase. It'll give you some vibration. Your hate for the packaging was hilarious! lol You're right, though, they did an awful job. It should have actual photos and the fact they didn't list the features and options is insane. I can't wait to see what body, engine bay, and interior you do for it. I'm sure it'll be beautiful. How's the hobby/filming building coming? I can't wait to see the progress on that one; last I remember you were being super thorough and pretty far along.

Very nice Chassis.. The new pro line dodge ramcharger whit one of your great paint jobs would be a killer

@hemistormrc

5 жыл бұрын

Oh, good call! I believe I have seen one of those combos being together already though, check out dirtycrawler530 on Instagram. ;)

I have that style Transmission I usually take the main drive gear and shaft and put it in the motor mount plate and line the pinion up the best I can that way, then snug the motor up. I haven't broke teeth and have a smooth rolling truck.

@Cronicncars

5 жыл бұрын

I actually just upgraded to brushless and bound my back tire up. the transmission ripped my diff gears apart on my 10 2 lol.

Do a Proline Metric TRD Racing Body. It already has an opening hood to showcase that motor and you could whip up some sick TRD paint scheme!!🤙🏼🤙🏼 Love your work man keep it up!!

really nice....

@hemistormrc

3 жыл бұрын

Thank you! Cheers!

I think it would be so nice to see you paint a modern version of "the Fall Guy"- Type of car. Greetz from Germany. Love your content

@hemistormrc

5 жыл бұрын

Going to look that up! Thank you for the suggestion and the support!

@macguider5959

5 жыл бұрын

WOOOOHOOOOOO, that would be so awesome !!!!!!!

Hi Chris I've actually built one of those I did a replica of my first 4x4 1980 K5 blazer fully detailed the motor with headers complete exaust I fabricated from a parts tree cut the hood and put chevy hinges on it now I have a $1200 rc well worth something memrable for me, you should do a Creep body with crazy wicked stripping like your scx10iii Rubicon really enjoy your videos 😎👍

if it fits, a powerwagon body with your paint twist would look awesome

@hemistormrc

5 жыл бұрын

I might have one of those laying around somewhere, great suggestion!

Awesome looking build, now SSD needs to make a Chevy Apache pick up truck body like Vanquishes Scout “ish” body. Make it mainly lexan and add plastic bits of detail ! Either way I’m looking forward to the finished rig ! 👍👍

@hemistormrc

5 жыл бұрын

That is a cool suggestion indeed!

Glad your back brother! Always a pleasure Chris! Kits are get'n more scale every day! Well covered. Nice castle. Have you checked out the Holmes motors. Even more torque than the castle. Again glad your back in the rc game again an hope you are well!

@hemistormrc

5 жыл бұрын

Might have to combine a HH Revolver and a SideWinder4 at some point, I hear good things!

Welcome back. Will you be getting the Vanquish VS4 -10 Pro kit?

Great video. Wanting to see the proline ram charger body.

You should make it a sweet chevy stepside. Proline has a 78 K-10 stepside body for 12.3" wheelbase kits.

Great first impressions NonBoxing! Just judging by what you showed in video...will that electronics box/fuel cell impede the used of a interior or a truck bed? It sees to stick up a lot.

@hemistormrc

4 жыл бұрын

It will be a good fit behind the seats of any regular interior, but it is indeed a spacious box, meaning you can also fit a light controller in it for example. Seeing it stick out of the bed will be a pretty view though, in my opinion. Thank you for watching!

DANG! The wish list just got longer. -"Angry" Dave

With the motor so far back find a 4x4 van like c1500 or econoline! would look very scale and 4x4 vans are always cool!

Hey man nice to see ya..lookn good..i think u should used that 4runner body from Rc4wd ..and paint it rootbeer and gold trim

@hemistormrc

5 жыл бұрын

Wish I had one kicking around to play with!

It’s a really nice kit, it’s too bad that, from a scale point of view, there wasn’t more forethought to the motor placement. After much deliberation, and not wanting to cut apart the firewall in my expensive Jeep hardbody, I opted to get an SCX10 ii RBK, with SSD’s scale aluminum transmission and married transfer case. Thanks for the review.

You think this would be a good kit for a first time builder? Really want to make my own truck. Was also looking at the Redcat PACK kit, Pretty much a pre-built Gen8 kit. Any thoughts?

A old school chevy truck or blazer. It is a small block chevy engine anyway lol. Keep up the great work.

@hemistormrc

5 жыл бұрын

Thanks for the input, Brent! I think that is exactly what I will go with.

Everyone likes a "Smooth Bottom"

@hemistormrc

5 жыл бұрын

Hahaha! I hope you are having a good weekend!

I already own the TRX4 sport kit but I want to get another kit to totally scale out do you have any suggestions...I was looking at the SCX ii...or Enduro Sedano...or SSD or Cross Emo.

Can you tell me of the frame rails are the same as axial scx10 rails

Would you ever do a defender d110 pickup truck?

What type of grease do you use?

i think a jeep rubicon would be cool or an old classic american pick up would fit perfect to the v8

@hemistormrc

5 жыл бұрын

I'm also thinking a classic would look nice!

landrover series one crew cab with wood flat bed

@hemistormrc

4 жыл бұрын

I like that!

Going from Bag A to Bag F makes one a Bag D........ Which bodies fit this kit?

@hemistormrc

4 жыл бұрын

Too many bodies to mention, almost! I have one in particular that I have my eye on. ;)

I built the trail king a couple days ago and it’s a great kit but how do they expect a decent size motor and the wires to fit through that timing chain cover thingy? Also there’s not much selection in 12.3” hardbodies with an opening hood. And no room for headers! Lol

@hemistormrc

5 жыл бұрын

Headers are indeed a bit tight, but one can also only do so much. I think we will see more lexan option with opening hoods in the months ahead, the Metric is a great body to showcase what can actually be done.

Hemi what can you make with X-carve?

Single speed transmission I'm guessing?

When are you going to finish this truck?

Needs to be a chevy body since that is a replica of a 350 sbc get that step side proline body

@hemistormrc

5 жыл бұрын

That would make it correct and not a hot rod indeed!

Are you going to move the xcarve to your new shop or is that staying on the dining room table? lol

Love you chris ❤️❤️👌🏻❤️❤️❤️❤️❤️❤️❤️🐱

Ugly box award cracked me up. Not to many will get it.

@hemistormrc

5 жыл бұрын

Facts!

How would you compare this to the Axial raw scale builders chassis kit? Which would you say is better?

@marksrcadventures3763

5 жыл бұрын

My current daily driver SCX10 2 Deadbolt is mainly SSD upgrades lol. For the price point, quality is way above stock Axial

@hemistormrc

5 жыл бұрын

The SSD beats it in every aspect, but for a price tag that's much higher it should. The SCX102 Raw can be adapted as you go and as you see fit, the TrailKing comes fully loaded. It all depends on desire and expectation, and budget. Nice to have more options though!

@rcaddict4375

4 жыл бұрын

I have taken your advice and picked up the Trail King and it is currently on its way to me. I have also picked up the Castle Creations Mamba X, 2850 kv slate crawler edition motor and esc combo to power it. To get me rolling I have the Pro-Line Rock Shooters. I have lots of choices as far as tires. I have always wanted a honcho so I’m doing the F-100 with cage on the back. All that being said, what would you recommend for bumpers?

Also where do I find the 3D print files you mentioned?

@hemistormrc

5 жыл бұрын

I got mine in an email, but I will try to find out!

MAAT! Koffiebeker NU!

do you have a promo code if we buy one off the amain site?

🤙🏽🔥🔥🔥🔥