A look at Springfield's SA35 take on the old classic Hi power here's the rundown and what we think of it after higher round counts and many range trips. c b productions 2023 fc F2223
Жүктеу.....
Пікірлер: 43
@johnwhitneykokalis999011 ай бұрын
Mine is the same as yours, a great gun with a high number serial #.
@Joe-by3bu3 ай бұрын
I consider myself a high power aficionado. I own 6. 4 Fn and two browning. All of them but one have the sloppy floppy spring thing going on. Working as intended. Does not affect anything.
@mikewithers29911 ай бұрын
Awesome review and updates. I've had mine for several months and I love it more than my original. Very accurate and such a smooth shooter. So glad I waited for a later model. No malfunctions after 650 rounds.
@joep423511 ай бұрын
Really love that gun !!!
@CZ9mmUSA Жыл бұрын
Great Video! YB has one, I may need one in 2024. :) stay safe out there. B9USA Sr.
@ThecrazyScotsman11 ай бұрын
Glad it is running well for you brother
@jerryjohnson461811 ай бұрын
Two thumbs way Up !!!!!!!!!!!!
@pistolcalibercarbine Жыл бұрын
Nice! Wish someone would make the detective model again.
@ftdefiance1
Жыл бұрын
I believe Girsan is making a compact version.
@jimmyvalhalla1939
10 ай бұрын
Those Argy guns were great
@LoneStarLawman11 ай бұрын
The more you shoot a pistol, wear will occur. However on metal frames and slides, I have found applying Enos Slide Glide light gun grease helps a lot..
@kc0lif
9 ай бұрын
that's breaking in😅
@LoneStarLawman
7 ай бұрын
@kc0lif The gun grease will help prevent excessive wear, with the break in, and beyond that.
@GeorgeMoilanen5 ай бұрын
Very nice review. Thank you, Mine is serial # 28XXX. So far no problems. My left side front of slide is wearing like yours at the front and is a visible loss of finish. Hoping they fixed launch problems.
@T.A.B.Videos11 ай бұрын
Nice haven't seen one yet
@brucemace54043 ай бұрын
Had to send mine back after a couple handle rounds. They replace extractor spring, pin and guide. Work good first 60 Then doing same Again. Sending it back. They are really nice and fixing for free Including shipping
@gonzaloserrano33976 ай бұрын
En Argentina la fabricaban, muy buena pistola
@TheRealCobraBurnout11 ай бұрын
yeah buddy!
@caseymurphy24411 ай бұрын
Good review. I've had several original Mark 3s & a couple Praticals dual tones. What are the 'issues ' that you had with it? I wanted one the last couple years but stayed away because too many problems.
@wraith6710 ай бұрын
BHP Springs has a good replacement for that guiderod...
@YellowFellow867 ай бұрын
Is the spring being that way allow the SA35 to shoot +p ammunition?
@juandiegas821110 күн бұрын
The spring was pretty sloppily done. Since they were updating the design, they should have done a self-contained spring assembly or double spring like so many guns today. Maybe they could still offer those? They also need to offer several different sight options at least after market. IF the extractor issue has really been solved, then all good otherwise.
@sasamalekshahi48215 ай бұрын
Series f and series c are made in which country?
@thealsatian4232 Жыл бұрын
Any slide/hammer bite?
@JW...-oj5iw
11 ай бұрын
I'm pretty sure J.W said Springfield slightly altered the hammer spur to reduce or eliminate hammer bite. As far as slide contact, it's not a likely problem as long as the shooter grips it correctly.
@dougglaus9256
4 ай бұрын
I have around 600 rounds through mine with no hammer or slide bite.
@QuietMikeW10 ай бұрын
So cool, wish I could buy one, but I’m a slave of communist CA
@brayanvillanueva3442
6 ай бұрын
Wait we can’t buy them? Because I know of a local gun store near me sold one and I live in california.
@moreme40
6 ай бұрын
Real slaves weren’t allowed to move
@dougglaus9256
4 ай бұрын
They make a California model with a 10 shot reduced capacity magazine.
@classicgunstoday19726 ай бұрын
If I were to get another 9mm handgun, it would be either this or the Sig Sauer M11A1. As it is, I am loving my Beretta M9 and am going to be looking for a companion Century Arms AP5 (MP5 semi auto clone)
@ZFlyingVLover6 ай бұрын
If I was to improve this gun I do the following... A) Make it optics ready B) put some groove across the top to minimize glare C) Maybe put a really short rail on it but this might take away from the classiness of the gun overall
@triggerman10923 ай бұрын
Slide, barrel and frame are made by tisas in turkey and assembled by sprinfield
@KorEditing3 ай бұрын
spring looks crooked, it shouldnt be bent like that, just straight. might be the cause of your nick on the end of your slide being one-sided.
@chadhaire17116 ай бұрын
NOT American made......parts made in Turkey. Springfield doesn't make anything.
@alexs5744
6 ай бұрын
At that point you might as well get the Girsan copy and I hear that they’re good.
@dougglaus9256
4 ай бұрын
The Springfield is hands down a much better weapon than the Girsan. The Girsan has a magazine disconnect. Meaning that you have to have a magazine inserted to fire the weapon. The Springfield’s trigger is a much MUCH better than the Girsan. In fact I think it is better than the FN made hi power. Yes I do own a Browning HI power. It is a FN made in 1968. I do not like the magazine disconnect. It is frustrating and takes away from the trigger pull being smooth.
@chadhaire1711
4 ай бұрын
@@dougglaus9256 easily removed Goober
@michaelmcshane6280
4 ай бұрын
It is my understanding all the parts in the SA 35 are forged and made at Springfield Armory. No forgien parts.
@chadhaire1711
4 ай бұрын
@@michaelmcshane6280 hahahahahhahaha..SA Doesn't make anything
@Lutz1019 ай бұрын
Nice, but I would prefer the Indian made clone of the WW2 era Canadian Hi-Powers made by Inglis, the 'Pistol Auto 9mm 1A' from Rifle Factory Ishapore. Better for WW2 reenactment for a start. en.wikipedia.org/wiki/Pistol_Auto_9mm_1A
@ryanranard5187
3 ай бұрын
Check out the new Inglis hi powers for ‘24 imported by SDS imports
Пікірлер: 43
Mine is the same as yours, a great gun with a high number serial #.
I consider myself a high power aficionado. I own 6. 4 Fn and two browning. All of them but one have the sloppy floppy spring thing going on. Working as intended. Does not affect anything.
Awesome review and updates. I've had mine for several months and I love it more than my original. Very accurate and such a smooth shooter. So glad I waited for a later model. No malfunctions after 650 rounds.
Really love that gun !!!
Great Video! YB has one, I may need one in 2024. :) stay safe out there. B9USA Sr.
Glad it is running well for you brother
Two thumbs way Up !!!!!!!!!!!!
Nice! Wish someone would make the detective model again.
@ftdefiance1
Жыл бұрын
I believe Girsan is making a compact version.
@jimmyvalhalla1939
10 ай бұрын
Those Argy guns were great
The more you shoot a pistol, wear will occur. However on metal frames and slides, I have found applying Enos Slide Glide light gun grease helps a lot..
@kc0lif
9 ай бұрын
that's breaking in😅
@LoneStarLawman
7 ай бұрын
@kc0lif The gun grease will help prevent excessive wear, with the break in, and beyond that.
Very nice review. Thank you, Mine is serial # 28XXX. So far no problems. My left side front of slide is wearing like yours at the front and is a visible loss of finish. Hoping they fixed launch problems.
Nice haven't seen one yet
Had to send mine back after a couple handle rounds. They replace extractor spring, pin and guide. Work good first 60 Then doing same Again. Sending it back. They are really nice and fixing for free Including shipping
En Argentina la fabricaban, muy buena pistola
yeah buddy!
Good review. I've had several original Mark 3s & a couple Praticals dual tones. What are the 'issues ' that you had with it? I wanted one the last couple years but stayed away because too many problems.
BHP Springs has a good replacement for that guiderod...
Is the spring being that way allow the SA35 to shoot +p ammunition?
The spring was pretty sloppily done. Since they were updating the design, they should have done a self-contained spring assembly or double spring like so many guns today. Maybe they could still offer those? They also need to offer several different sight options at least after market. IF the extractor issue has really been solved, then all good otherwise.
Series f and series c are made in which country?
Any slide/hammer bite?
@JW...-oj5iw
11 ай бұрын
I'm pretty sure J.W said Springfield slightly altered the hammer spur to reduce or eliminate hammer bite. As far as slide contact, it's not a likely problem as long as the shooter grips it correctly.
@dougglaus9256
4 ай бұрын
I have around 600 rounds through mine with no hammer or slide bite.
So cool, wish I could buy one, but I’m a slave of communist CA
@brayanvillanueva3442
6 ай бұрын
Wait we can’t buy them? Because I know of a local gun store near me sold one and I live in california.
@moreme40
6 ай бұрын
Real slaves weren’t allowed to move
@dougglaus9256
4 ай бұрын
They make a California model with a 10 shot reduced capacity magazine.
If I were to get another 9mm handgun, it would be either this or the Sig Sauer M11A1. As it is, I am loving my Beretta M9 and am going to be looking for a companion Century Arms AP5 (MP5 semi auto clone)
If I was to improve this gun I do the following... A) Make it optics ready B) put some groove across the top to minimize glare C) Maybe put a really short rail on it but this might take away from the classiness of the gun overall
Slide, barrel and frame are made by tisas in turkey and assembled by sprinfield
spring looks crooked, it shouldnt be bent like that, just straight. might be the cause of your nick on the end of your slide being one-sided.
NOT American made......parts made in Turkey. Springfield doesn't make anything.
@alexs5744
6 ай бұрын
At that point you might as well get the Girsan copy and I hear that they’re good.
@dougglaus9256
4 ай бұрын
The Springfield is hands down a much better weapon than the Girsan. The Girsan has a magazine disconnect. Meaning that you have to have a magazine inserted to fire the weapon. The Springfield’s trigger is a much MUCH better than the Girsan. In fact I think it is better than the FN made hi power. Yes I do own a Browning HI power. It is a FN made in 1968. I do not like the magazine disconnect. It is frustrating and takes away from the trigger pull being smooth.
@chadhaire1711
4 ай бұрын
@@dougglaus9256 easily removed Goober
@michaelmcshane6280
4 ай бұрын
It is my understanding all the parts in the SA 35 are forged and made at Springfield Armory. No forgien parts.
@chadhaire1711
4 ай бұрын
@@michaelmcshane6280 hahahahahhahaha..SA Doesn't make anything
Nice, but I would prefer the Indian made clone of the WW2 era Canadian Hi-Powers made by Inglis, the 'Pistol Auto 9mm 1A' from Rifle Factory Ishapore. Better for WW2 reenactment for a start. en.wikipedia.org/wiki/Pistol_Auto_9mm_1A
@ryanranard5187
3 ай бұрын
Check out the new Inglis hi powers for ‘24 imported by SDS imports