Another wonderful video from a wonderful painter.

@paintingbyjosh

Жыл бұрын

Appreciate the kind words legend & you watching on 🤙🙌

Awesome. Thanks for sharing man. Just bought me one. Can’t wait to try it out. I ran Titan before but wanted this finishing machine. 👍🏼

@paintingbyjosh

Жыл бұрын

Glad I could share brother. Definitely let me know what you think of the Graco verse the titan. I'm sure you gonna love this 💯 appreciate you watching on 🙏

Great machine. Great tutorial. Great video.

@paintingbyjosh

2 жыл бұрын

Thank you Ling

Mate, nice review! I'm headed to buy one now

@paintingbyjosh

Жыл бұрын

Hey mate, cheers! How'd you go?

Very well explained.

@paintingbyjosh

3 жыл бұрын

Legend thank you 🙏

Great stuff Josh! Can you go over cleaning the machine in a future vid? Thanks, Adam.

@paintingbyjosh

3 жыл бұрын

Can do mate will get one up in the next few weeks🤙 respect

Hey Josh! Just subscribed! Is there anything you shouldn’t try to paint with this sprayer setup? Or any paint types it isn’t good for? Assuming you can swap out a tip or two to broaden what can be painted and with what? Keep laying it down!

hi josh would you recommend this for bathrooms because thats all we do or would a cordless be easier we also do the ceilings

I've just bought this in the cordless version Josh. Absolutely love it. It's so different being portable and having no cables. Thanks for the video. Peace from the UK mate 👊🏻

Cracking vid cheers

@paintingbyjosh

3 жыл бұрын

Appreciate it mate🙏🤙

Nice video. Watched all 36min. And sum(rewind). I'm considering buying an HVLP, but want more use out of it. I'm thinking maybe the gravity fed GX19 Graco unit. What do you think?

Thanks for sharing 👊🏼

@paintingbyjosh

3 жыл бұрын

No worries 🙏 thanks for watching

@paintingbyjosh

3 жыл бұрын

Legend man 🙌🏼

Looking good

@paintingbyjosh

3 жыл бұрын

Appreciate it mate💯🙏

Are you suppose to put teflon tape between fittings on this unit ?

I'm spraying a heavy steel structure with epoxy paint ,pls advise the type of gun to use. I want to mix 20 litres of paint at ago.

Hi Josh, I was wondering if the GX19 you have behind you requires throat seal. I have the same sprayer but haven't used it yet so want to make sure either way before run the risk of wrecking it Appreciate any advice you can give . Thanks very much and keep up the great videos cheers

@paintingbyjosh

3 жыл бұрын

Hey mate! TSL is definitely required with any of the Endurance Piston Pump units (so your 190PC and upwards). The GX19 use a Graco ProXChange piston pump, which is designed differently to the Endurance Pumps. It's a sealed design and has a wiper seal internally which doesn't require TSL to keep your piston lubricated. Won't wreck it, make sure it's well flushed and you'll be sweet! 🙌🏼

@mcr9b6

3 жыл бұрын

@@paintingbyjosh Brilliant thanks Josh good to know

Hi Josh, I have a similar sprayer just called a GX19 I can't seem find much at all about them on the internet there is some limited info on the graco website though. I was just wondering if you are familiar with this sprayer . I purchased it brand new off trademe here in new zealand but haven't used it yet other than pumping out the fluid it came with and spraying water through it so as to get a bit familiar with it, yep filled it with pump armour as well. It sees to have higher capability than the GXFF and the Finish Pro GX19. It comes with a bigger diameter 15m hose diameter and an sg3 gun etc . Just wondering if you now anything about them . Also had a look on the go industrial website but not there either . Thanks Cheer s Tony

@paintingbyjosh

3 жыл бұрын

Hey Tony, just replied to your last comment man. As long as you're thoroughly flushing the unit and storing with Pump Armour - TSL isn't needed!

Hi bud, awesome video. Would you recommend this machine for a beginner at spraying? I’ve been a professional decorator for 27 years and want to start working faster and smarter. Would you also recommend buying a different gun? I intend to do ceilings and woodwork. Cheers

@paintingbyjosh

3 жыл бұрын

Hi! Yeah it's an awesome little machine if your going to use only once a week but if not I would step it up to a 190pc

What's the difference with the 390pc?

Which spray tip do you use.?

Can this sprayer handle exterior paint? I mostly do smaller jobs, but I want a good quality unit. It is hard to find a small sprayer that is professional quality. I already killed the "home depot" version of a graco handheld sprayer and I do not want to go that route again. I am 100% fine with this unit having lower throughput compared to something like a 390, but I need to know if it CAN handle exterior paints. So far I have seen conflicting information regarding it's ability to handle various types of paints.

@paintingbyjosh

3 жыл бұрын

Hi mate, I would definitely recommend the @GRACO 190PC much better unit for a all around application. Hope this helps

Hey Josh, I'm renovating my home. Just wondering whether to get a 390 and buy a hopper for it for trim work or to buy this gx19 and use it for everything internal. What is the easiest to use with the best finish? Thanks mate!

@paintingbyjosh

3 жыл бұрын

I would just go with the 390 bro. Awesome alrounder and for finishing with the FFLP tips🙏🤙 hope this helps

@yup3398

3 жыл бұрын

@@paintingbyjosh cheers brother!

@paintingbyjosh

3 жыл бұрын

@@yup3398 🙏🤙

hi i been following for a while with the gx ff hopper do you ever strain your paints?

@paintingbyjosh

Жыл бұрын

Cheers for watching on legend. most paint I strain before putting through the sprayer 💯

What brand pants are you wearing? A link to their website would great! Thanks!

@paintingbyjosh

3 жыл бұрын

Bisley overalls 🙌

I have 390 pc and ultramax but for finish doors and trims not really happy with either. This gx 19 looks like the right sprayer for woodwork with even lower pressure and no pulsation?

@paintingbyjosh

2 жыл бұрын

Hey mate, yeah the gx19 is a awesome unit for woodwork/trim but the 390pc is just as good 💯 sometimes it can tail with different finishing product. Cheers

@MuscleAKAOzzy

2 жыл бұрын

@Painting by Josh so basically l can just buy the hopper finishing kit and plug it on the 390🤔

@paintingbyjosh

2 жыл бұрын

@@MuscleAKAOzzy yes that is correct you can get the hopper finishing kit and connect it to you 390 pc 👍

Hey mate Wtz other Spray gun using for bigger project. Thanks.

@paintingbyjosh

3 жыл бұрын

Hey, for bigger projects I have a few different ones but anything from the 695 and above 👍

@paintingbyjosh

3 жыл бұрын

Hey mate, I use a FinishPro II 595PC for bigger projects! Anything from the 495PC upwards will do the trick, all depends on what paints you're spraying and what sort of litres you'll be putting out during the job.

What tip are you using for the gun ?

@paintingbyjosh

3 жыл бұрын

Hi mate, I'm using the FFLP308

Great video. There is a big difference between the RAC V, RAC X production, and the RAC X FFLP gaskets and orifices

@paintingbyjosh

3 жыл бұрын

Thanks mate, yes big difference between the tips 💯

كيف يتم الحصول عليه في مصر

I have the same machine,can i also spray latex with it?

@paintingbyjosh

2 жыл бұрын

Ho Ricardo, yes you can spray latex 👍

No troat oil? Just wondering

@paintingbyjosh

3 жыл бұрын

Throat seal liquid isn't required on the GX19 units! Different pump design to the standard piston pumps on the 190PC and upwards.

@raulinvelasco

3 жыл бұрын

@@paintingbyjosh thanks for the info

I recently purchased a Graco GX19 (stand version) and cannot for the life of me stop tailing. Tried low pressure, mid pressure, high pressure, 410 / 312 / 210 tips and all the same result. Cannot paint anything without it turning to absolute shit with sagging on trims and tails and sagging on doors. Spent a fortune on paint and sanded back 2 x doors now 2 x times and keep getting same result when I try again. First coat on trims is ruined with sagging so sand the sagging and try again and get same result. Done all the testing against paper / MDF sheets and cannot stop the tailing. I'm beyond frustrated as I've spent over $1300 on machine and $400 on paint and 2 x rooms I've done are completely fucked. There's is some glass gloss finish in spots along with tail makes / sagging marks and then low gloss areas. As mentioned I'm beyond frustrated as the machines look so easy to use.

@ILruffian

3 жыл бұрын

Sorry to hear. I bought a Graco TruCoat 360 (handheld from Home Depot) and had the same problem trying to do fine finish work (e.g. doors). Ended up returning it for a Fuji Q5 HVLP. I have yet to try it, as I need to do the same sanding you did.

@ILruffian

3 жыл бұрын

After reading your review, I think that I would go for a Titan ED655 for bigger stuff.

Id never get another hopper pain in the arse when swapping paint. Buy mine was 3 times the size of this