Thank you for explaining/demonstrating fail safe. Well done, Sean. 👍🏻🙂

I kinda want to see what happens to you if you actually try to take the piggy away from Brutus... I have a feeling your ankles would definitely be in danger... lol

Very interesting,i never knew that such a thing exists, more useful information from Griffin RC, have a great Sunday stay safe all the best from England 🇬🇧🔥🇺🇸🔥🔥🔥🛩️✈️😁👍,oh and that's the best set of teeth i have ever seen on a co pilot lol 😂💯

@GRIFFINRCPLANES

2 жыл бұрын

Yes the copilot has some crazy choppers

I love your channel, Its very professional and informative, I’m a new RC pilot and have come to your channel several times. You should get shirts made that say “can I have the piggy” lol have a good one brother thanks again.

@GRIFFINRCPLANES

8 ай бұрын

Thank you very much for your great comment my dad is a cartoonif you look back many videos ago I have a short one with some of his offered to do some stuff Maybe We Will do the piggy main logo light Blue picture in the circle is a drawing he has done. Happy flying thank you

just did my spektrum aeroscout ar631 receiver. Bind with throttle at zero and it failsafes at zero. If you bind at full throttle it will failsafe at full throttle. I found out the hard way to shut my transmitter off (newby) at the field before taking out battery from aircraft, and the propellers max out. luckily i was holding on to the plane at the time.

Greatly appreciate your efforts…. Helps a lot! Thank You.

Great subject. Great video

This is great information!!! Thanks for the video.... Please keep the info coming!!!

@GRIFFINRCPLANES

2 жыл бұрын

Hey batdfan thank you and I will do

All great info. I like to set my failsafe to zero throttle with ailerons and rudder set for a gentle left or right turn and just a touch of up elevator. If I do lose the signal connection in theory I shouldn't have to walk too far to retrieve my plane.

@GRIFFINRCPLANES

2 жыл бұрын

That is a great theory and gave me a good laugh. Yes we need to consider the walk of shame

Cool demo Sean. Good to see you at the field on Sunday.. I use and program Ar636 receivers, but reprogram them with 3 flight modes and do not use Safe select. In this case I think you must choose either Hold or Pre-set ? If you or anybody else have experience in this, it would be great. Thanks again RHN in Nashville

@GRIFFINRCPLANES

2 жыл бұрын

. I will check into the different choices in fail safe with the 636 the next time I have one connected to the computer. Hey good to see you also. I may be there tomorrow . in case you are going monday?

You did a lot of work putting together this video Sean so that's much appreciated. I do have a couple of questions though. I have a couple of AR636's that I got one way or another but I don't use them because I have no idea what the SAFE thing actually is. Nothing that I read on Horizon's site ever clearly explains it. At least not to me. I lost my eFlite Havoc 80 because of something screwy and I blame it on the SAFE receiver, not the servo connections like they try to say. I just flew the receiver stock assuming that SAFE was turned off but they didn't tell you anything about how to use it in the manual so I just left it as is. I've since rebuilt it and fly it with a Flex Aura 8 stabilizer and it flies extremely well. Anyway, you mentioned at the the end that your mock up would go into full SAFE with failsafe. You turned the plane upside down and something went funky with the ailerons and you said that was SAFE. Well, what was SAFE? What was happening? Does SAFE work with the gyro or is it something separate? I don't get it.

@GRIFFINRCPLANES

2 жыл бұрын

Hi there I'm glad you have brought this up. In a couple days I will have all your answers. . short answer is SAFE sensor assist flight envelope.you can bind with to be used on/off with channel 5 reversed. Or bined always on. If the receiver was bought new by its self it's off until turned on with spektrum programmer. Safe keeps the plane from banking in all 3 directions to far.and self levels when not touching the sticks (auto pilot) when I flipped the test plane over the alerion were trying to roll the plane over. My guess you had some chanells reversed and then some how activated safe. And them in turn the gyro was working backwards to how you have the plane set up. Big video coming soon

@douglindauer7327

2 жыл бұрын

@@GRIFFINRCPLANES Thanks Sean. I'll look forward to that video. On the Havoc crash, no, not possible that anything was reversed. The crash happened toward the end of a 4 minute flight. When setting up on the downwind leg for landing the plane suddenly did a couple of fast 360 rolls, completely uncommanded. Roll ... stop level ... roll ... stop level ... and then it just dove to the ground. Horizon sent me a new airplane because this was a known bug. They even sent a new 6S 5000 Smart battery! This is why I've got 2 AR636's. They insisted that it was their servo connector. And now they've discontinued the Havoc 80. Too bad because it's a great flying jet.

@GRIFFINRCPLANES

2 жыл бұрын

@@douglindauer7327 ok its noted nothing reversed. stay tooned thank you

Good info! Subscribed

@GRIFFINRCPLANES

2 жыл бұрын

Hi Dean thank you. I really appreciate it. I have tons more to share so check back often.

i crashed into a tree with my apprentice stol 700mm bnf and i noticed that ruder was lock on turning to the left, i couldn't turn it, i keep going, i was in safe mode. Do you thing i lost signal and plane entered in fail safe?

Just bought an eflight A10 thunderbolt 2 BNF. The moment I binded the plane to my nx8 transmitter the front landing gear continued to turn, one flap dropped and I had no control of the rudders , flaps and I couldn't stop the gear from turning right continuously... if you have any input please let me know... the plane came out of the box this way.. and I have no clue what to do

@GRIFFINRCPLANES

Жыл бұрын

if you have the nx8 then add the a10 to your models. make sure you are adding the correct a10. that plane first came with a 636 receiver so there are 2 different e-flite model numbers. efl????? then rebind it from scratch . let me know if that works if not we will try something else

Do you know if the ar631 series does the same as the 636? My idea is, can you do a video on creating a throttle curve?

@GRIFFINRCPLANES

2 жыл бұрын

The smart receivers such as the 631 does the same as the 636 and ALOT more. The 636& 6335 program from your computer and a app with smart phone or tablet and the smart receivers program from your transmitter only how ever they use the same app and computer program to upload preset models and updates. Yes I can do throttle curve. Give me a few to figure out filming the transmitter screen better

Interesting, so when it fail safes to “safe mode” I assumed that would be wings level like normal safe mode. It appears, fail safe mode is full left and aft throwing it into a spin. Am I correct on this? Thanks

@GRIFFINRCPLANES

Жыл бұрын

The default fail safe is however the plane is bound. So if everything is centered when you bind it. And if you ever lost signal then all control surfaces would go neutral and motor off. . When you gain signal everything would go back how you were flying. The fail safe as you described can be set up that way

@ltk20

Жыл бұрын

@@GRIFFINRCPLANES I just tested it on my Timber X and it failed to safe mode when I turned off the transmitter. Even with safe off, it came on and maintains level flight. Obviously didn’t do this in the air but I picked it up and i fights to maintain level wings just like safe would do. Under the settings I have it set as fail to “hold” for each flight surface.

Deutsch we're gut!!!!

I'm getting away from spektrum, not digging having to prostitute myself every time I wanna pick up a new receiver plus my farts no longer make sound 😔