Just got a DX5 Rugged and found your video very helpful! You need to get paid by Spektrum for these videos on the DX5. Thanks again.

I want to thank you very much for the fantastic and calm and very understandable way in which you explain everything. you have helped me fantastic to set up my new arrma infraction truck together with my spektrum dx5c .. really fantastic ... and I have never seen anyone so friendly and calm. awesome.

@upgradedrc3697

4 жыл бұрын

Thank you, i appreciate it!👍

Bought this radio and even after reading the manual this video is far more informative and easy to understand Thank you very much on the help!

@upgradedrc3697

4 жыл бұрын

Thank You!

@brandonv4900

4 жыл бұрын

👍

Thank you spectrum should of had you write their instruction manual. Best videos of how to setup the dx5c

I just bought this tx used and your video took care of all the concerns I had. A year later and this video is still helping other’s. Thanks!!!

Thank you, thank you, thank you! I have been scrolling through KZread for many years looking for a video like this and the others for the transmitter settings. Very informative and easy to understand. For folks who have never had anything other than RTR transmitters this is a great series.

Thanks again ! you're awesome explaining the functions clearly & understandable..I set my timer for my nitro fuel countdown / now i'm going to get my DX5C and do other functions with you..Great video Trevis !

I just bought the DX5C and I watched both of your videos from beginning to end. Thank you so much for the information sir.

Wow dude!!! Thanks a million.... I bought a used transmitter with no instruction book or any clue.... this was an absolute life saver!!! Watched it a couple times.... helped me troubleshoot previous settings causing me tons of grief..... thanks

Thank you for the great explanation of of the Dx5c. You have helped me a ton. I hope you do another in depth video on expo and mixing. Thanks again

Thank you so much! Was having an issue and you helped me figure it out!

This was so helpful. I upgraded to this radio from the dx3. I am using the Spektrum radios for oval mudboss racing and upon upgrading I went from running 63 laps at my local track down to 59-60 laps, all because I really didn’t know how to set up the radio. After watching this video I feel confident I will be able to set up this radio much better now, and get myself back to my regular 63 laps, or maybe even better👍👍😁

I appreciate the time and effort put into these videos. Watching number 2 hoping it helps me fix my issues. Currently have about half my normal steering range. Rate and travel maxed out

@fontaine_dh9960

5 ай бұрын

Sometimes it's juste the servo

3 years old and still pretty accurate thanks Bud

@retrowolfe9972

2 жыл бұрын

Whats different?

excellent video series; just picked up this radio. Great explanations. Great graphs! Thank you- this helped tremendously

Helped me so much i went out and bought this controller. Thanks !!

Thanks been out of rc for close to 30 years , and decided to get back in with 5th scale. And have that radio system learning new tech. Thanks

Very good video!!! Thank you! I now know how to operate my new controller and it’s awesome!!!

Thanks for a VERY GOOD job on explaining so many things about this radio! I am getting ready to put in the new receiver and got this especially for the 4WS. I sure would like to see you do another one of your high quality videos on how to mix all that correctly! You definitely do have a real talent for explaining things in an easy to understand and methodical way. So glad I found your channel! Also just subscribed and am hoping you'll find some time to do that mixing video. Thanks again RC! Great Job!

Thank you again for part 1 and 2!!! I would have been completely lost on how to fix my problem and would have made the mistake of buying a new ESC. Subbed and belled for all videos!!

Great Video and helped so much on this controller👍Watched both of em and explains some much needed access on the menus❤️Badass controller and bond up so easy to my MG36 and changing all my units to spektrum👍

GREAT review an information on this radio! Thanks👍👍👍

Thank you very much! You helped me a lot with your explanation! Now i can Get more out of my Losi 5ive T.

By far the best explanation I've seen yet to date on this transmitter. Thank you very much for covering almost all basic functions that the DX5C offers, cleared up alot of the confusion Ive experienced since I decided to make the transition from the many dedicated rtr radios I was using up until recently until converting the variety of different onroad/offroad rigs to operate solely on the DX5C/ dsm protocol and absolutely explained the somewhat overwhelming/poorly explained interface that spektrum designed great but failed to provide the proper instructions that certainly seems many users would greater benefit from if made available without contacting them directly. I myself have had some difficulty understanding the full extent to which this DX5C offers for such a large variety of different surface rc's although im much more confident that I'll be able to setup/tune/apply both optional as well as necessary settings to achieve better performance now in much less time thanks to you taking your time/knowledge to create such an informative"guide" in a way that has been more beneficial to me than any/all the rest(including spektrums own material). I appreciate your efforts to help all of us that haven't quite fully understood what the dx5c is infact capable of and how to properly implement these great features. Will be sure to share this with the many individuals that have had many questions that were addressed/answered here. Thanks again. 🍻

@upgradedrc3697

3 жыл бұрын

Thank you, your very welcome!

Thanks for the great explanation on this radio. It is a little overwhelming. I bought it for my crawler, so no need for AVS, but there is still so much adjustment built in. Appreciate your time.

@austonreeves3048

4 жыл бұрын

Rick Schoephoerster i bought it for my crawler as well, haven’t had a chance to play with it yet. Do you know how to set the drag brake for it yet?

Awesome Videos. Very Informative. Great Job! I'm new to the RC community and your video was very helpful on using the DX5C.

I’m new to the sport and have a new dxc5. Ive been intimidated by it, seemed extremely confusing to me. Watch two other videos and was still apprehensive. Your video was great. I feel confident now and will finally install install it and set it up using your video and directions. Thank you very much. I Look forward to seeing more of your videos

@upgradedrc3697

3 жыл бұрын

Love to hear that, thanks bro!🤟👍

This vid was really good it will help someone that is new to this radio

Thank you very much for the detailed explanation!

Outstanding video. Could not thank you more.

@upgradedrc3697

2 жыл бұрын

Thank you

I know I’ve commented on the other video but oh my gosh brother you have really helped me out completely explaining everything down to a T honestly spectrum should have hired you or at least be giving you money on this video the fact that you took the time out of your busy schedule to produce such a phenomenal video to help random people out my reading comprehension was never that good thank you so much keep the Phenomenal informative videos coming please

@upgradedrc3697

4 жыл бұрын

Thanks so much, people like you keep me going! More coming soon, i just finished building my house and shop.

@Finish-him-9699

Жыл бұрын

Exactly!!!

Dec 4 2022, man everything clear n ur video, u are exelente teacher🙌

Great video! I’ve got a couple cars it’ll be nice to consolidate to one controler and independently control settings for each

Nice video finally got my rugged set up

Helped me too except you glossed over aux assign which is where I needed help. Also looking forward to mixing. I subbed hoping for continued education on DX5C. Keep up the good work.

@DasCavi

5 жыл бұрын

Still need help?

@renobob7781

4 жыл бұрын

Good video expect you didn't spend any time on Aux..wanting to know how to do a configuration for using a light controller, 2 position and 3 position for a winch. Also want to know more about mixing and slave channel, wanting to slave my winch so when I give a little throttle my winch goes in a little and so on. Would also like to see you explain AVC some more. Looking forward to it.

Thanks for the video. I just got into this kind of radio so it was very helpful. I need to put my vehicle in training mode when my son gets a hold of the radio

@upgradedrc3697

3 жыл бұрын

Don't put your vehicle in training mode, just turn your throttle rates down a lot. From 100% to 10% or.👍🤟

@joseCalderon1976

3 жыл бұрын

@@upgradedrc3697 ah OK. And I can make two profiles for the same vehicle right? Thanks 👍

Thank you very much hope to learn more.😎🏁

Great videos. Thanks

Hey fantastic explanation 👌 I think I just graduated from the help from video thanks bro

Looking forward to your AVC video.

This is good information and a learning curve this is a lot to remember what does what. But thanks.

Thank you so much. Great job very helpful.🏁🏁🏁🏁.

Your video help so much thanks

Fantastic job big thanks

Great Video Dude

Great job with this thanks big guy

just want to let you know, VERY BIG THANK YOU!!!! you clearly HELP me big time SETUP & UNDERSTAND my futaba 7pxr remote. you are the verbal tutorial for the idiot proof of remote controllers. i have watched(several) & subscribed to your channel. 2 thumbs up & 2 toes up to you. AGAIN THANK YOU. be safe

Very helpful thanks

Great video

@upgradedrc3697

4 жыл бұрын

thanks brother

thank you very much real helpful

Awsome awsome i cant thank you enough

Great video bro... only suggestion I have is get a lapel mic so your audio is not changing between your shot. Thanks for the great detail, just bought one myself.

Your the man!! huge help!! where did you get the information in the begining?

Thanks Dude 👍 this video helped a lot

@upgradedrc3697

3 жыл бұрын

Glad it helped

Thank you Thank you Thank you

Thank you.

Great videos, any chance you can do one explaining bind and programming for the new receiver SR6100AT?

Thank for sharing very useful video~!! So, I added your channel~!!👍👍👍

Part 1 was excellent! This is the most in-depth review on this Spektrum DX5C remote! Real quick in the utilities setting how do I erase one of them? On my Travel at first my Servo Arms was turning my wheels way to far so I adjusted it so now they both turn about same, fixed that setting. Also, in my setting menu and where it says calibrate, I clicked it and I have for STEERING - OK / ? / ? and then for my TRIGGER is set at ? / ? / OK. Do I need to rebind and and re calibrate my Trigger to match up with my STEERING?

@upgradedrc3697

4 жыл бұрын

no, it should be fine

Honestly love how u went thru everything step by step could u do that with dx5 pro 2021 there’s a couple new features I’m having trouble with

@upgradedrc3697

4 ай бұрын

I don't have one, so unable to make a video on it. But, all the Spectrum radios are pretty close. What are you having trouble with?

@rhdant9748

4 ай бұрын

@@upgradedrc3697 I’m having trouble finding and activating drag brake thru remote esc is a 2in1 crawler fusion pro with drag brake fully engaged but wen I link to this remote and throttle it doesn’t stop like before and it has a roll after throttle but on old remote dx5 basic it would come to a stop instantly wen finger lets go of throttle just a little confused i know it’s a basher remote but I’ve seen plenty of people run dx5 rugged and dx5 pro on there crawler builds and they love it unfortunately I got my remote with no manual sorry for long message lol

@upgradedrc3697

4 ай бұрын

I have a dx5c and a dx5 rugged. On both you can only adjust the brake rate thru the menu on a trim switch. The drag brake is only adjustable thru the ESC. Adjust the drag brake first on the ESC , then adjust your brake rates with the trim switch F on the remote. I am assuming that the 2 different radios had the brake rates adjusted differently from the factory. Hope this helps.😎🤙

Thanks a lot for your explains, it’s very interesting ! Could you please insert french substitules, it will be helpfully !

Hi the steering servo on my hpi baja . When the transmitter is turned on it turns all the way left. Can u tell me how i Center my servo with the dx5c

Great series,. Quick AVC question. My RTR remote has a dedicated knob that probably controlled just the steering or priority. That's all I need. I would like to mimic that on the new remote. Should I assign the steering or priority to one of the trim buttons to replicate the AVC knob on my old remote.

@upgradedrc3697

3 жыл бұрын

If thats how you want to use it, ya set the button for priority. I set up my AVC for each vehicle on the remote independently and then only adjust when nesecary. And for my e revo i'm running 30% on my steering only with a priority of 90%. So, its almost nothing. But it does help me come out of the corners straight and on point though. But. AVC is bad for jumping don't use very much cause it tries to correct your steering in the air and you wreck

Great job explaining a lot of features, but you missed an important one. The Aux Assign. I would like to know how I could use one of the aux switches to run a winch or to turn lights on and off.

@upgradedrc3697

4 жыл бұрын

Ya, i mentioned that i will have to do video just on the Aux because there was to much to go over and fit it all into that video.

@dungeonracer4288

4 жыл бұрын

@@upgradedrc3697 Ah, sorry. Guess I missed you stating that. Heard it on the mixing feature, but not on Aux Assign. :)

Hi great video very well explain. I"m planing to buy a DX5 Rugged sometime soon. I was wondering did you or will make a video on just the mixing section? I really like the idea of mixing throttle and winching in at the same time. Thanks !!

@upgradedrc3697

2 жыл бұрын

Not anytime soon, but others have asked about it also. In due time.

did you talk about how to set steering end points?

@upgradedrc3697

3 жыл бұрын

No.

anyone that didnt understand exponential but you know how computer mice work.. expo is the same theory as mouse DPI... -100 expo your servo will turn maxed out with a slight touch.. +100 expo you need to turn the wheel almost all the way before it turns the servo at max..

🙏🏾

Can you do a Video on Setting Up FAILSAFE mode. Thanks 😊

17:50 I have a question on the steering rate override switch... In the video, yours is set to C for steering rate override. *I want my switch to be G*. However, G is for the timer. I've tried assigning the timer to another switch to free up G, but it still does not give me the option to select G (only scrolls down to F) Is G only for the timer?

@upgradedrc3697

3 жыл бұрын

Your the first one to ask me that question. Mine won't switch either, i guess it is only for the timer.

Is that local band music in your intro? Who is it? Awesome! Love your channel Trevis

@upgradedrc3697

3 жыл бұрын

Yes, Hashkoff

Under mixing option then mix: how can you select the 3 position option. Mine only comes up automatically 2 position.

@upgradedrc3697

3 жыл бұрын

I'm sorry, I never got into mixing. Call Spectrum and ask them.

I just discovered a conundrum concerning the SPEKTRUM MANUAL'S instructions about the need to re-set your car receiver's BINDING whenever you re-set the STR TRAVEL. I race on an OVAL track where my optimal Steering TRAVEL is only 70%, so I set my STR TRAVEL at 70% and my RC CAR corners perfectly using a maximum of 70% Steering travel on every corner. Now the SPEKTRUM MANUAL says to make sure that the STR and THR travel are set at ≥ 80% for correct BINDING, but it also says that you must re-set your binding every time you re-set your TRAVEL. However, if that was completely true, then after correct binding, you could never re-set your STR TRAVEL back down to any value less than 80% (or 70%, in my case) without immediately losing your BINDING, which would force you to re-set the STR TRAVEL back to ≥ 80% just so you could RE-BIND again, but as soon as you would try to re-set your STR TRAVEL to 70% again, you would lose your binding. So if what the manual says is completely true, then you could never set your STR TRAVEL at 70% without immediately losing your binding. Thankfully, I have been able to set my STR TRAVEL back down to 70% every time without ever losing my binding at all, so the warning about having to re-bind whenever you re-set your travel must be mistaken.

@upgradedrc3697

4 жыл бұрын

The manual says that you need to be at 80% to bind so that your AVC works properly, then you can set it back to whatever you want without rebinding

most likely you can also set your timer to start and stop with the application of the throttle, so you do not have to remember to press anything

@upgradedrc3697

3 жыл бұрын

No, I don't think so. You have to start and stop it yourself.

How can I use the transmitter to control my LED lights and winch.

@upgradedrc3697

4 жыл бұрын

This depends on the light set you got and if it has a switch and or a battery with it. Normally you plug in your lights to an aux port on the receiver ans assign an aux switch to your lights. But different lights hook up different. Consult the instructions your light set came with or ask your local hobby shop that sells them.

If i have dx5c that the motor has been changed on the car and the throttle is in reverse, is it best for me to swith the 2 wires on the esc to flip the forward/backwards direction or just reverse the servo direction in the remote? Would I have to rebind after doing so and would i lose my settings after i rebind?

@upgradedrc3697

4 жыл бұрын

I'd switch the wires on the esc

Thank you for the video! I recently bought a DX5R Pro and a SR6200A receiver to upgrade my E-revo. I still have issues getting it to work properly. One of the problems is the brake seems to be super lite even though I'm at 100%? What did you use when you bound the receiver ? Brake rate of 100 or 0? Also, when you installed the receiver in the box - was it perfectly flat w.r.t the ground? The e-revo has a sort of a tilt in the case. I'm wondering if that affects the giro... Thanks a lot

@upgradedrc3697

Жыл бұрын

100% forsure. The book says at least 80% when binding.

@upgradedrc3697

Жыл бұрын

No , it does not affect the gyro if it is not perfect. When you bind and calibrate be on a level flat surface and the reciever recognizes that it is level even though your reciever is not perfect.

How easy is this to set up with a Tamiya bruiser for the servo that shifts the 3 speed trans. 2 low 2 high 4 wheel

@upgradedrc3697

4 жыл бұрын

Thats a good question. I think it would have all the same characteristics of anything else, but not sure. Let me know!🤞

Kindly something else please regarding the AVC. Is it normal the I have to adjust it to about 12% otherwise the car want move in a straight line when accelerating if for example it is adjusted to 25% or more? Or do I need to recalibrate every time I change for example the expendential? Thanks

@upgradedrc3697

Жыл бұрын

No, you don't need to recalibrate after using exponential. For AVC you have steering, throttle, and priority. I'm not sure which you are referring to, but you need to set it up for what you are trying to do. Steering adds more control for the cornering, throttle adds more control to the throttle, and priority gives you more control over both. The more AVC you add gives the radio more control and you less. The more priority you add gives you more control over the radio. I don't like to use it very often. With No AVC you have total control of your car. Definitely don't use it for jumping, you will wreck a lot more. And it has been ban from all sanctionrd events. But a good combo for it is 30% steering, 30% throttle, and 90% priority. This will give you more control when you are driving and 30% on steering and throttle when you let off the steering and throttle. Hope this helps, it really is all about what you like.

I have two defeat spectrum DX6R and dx5c and I wish someone would do this for my DX6R

I can't center my servo. It drives to the right. How do I exactly center the servo w/ the transmitter? I have the 415 on a Gen 8 Scout. Also, after you make the changes, THEN you bind?

@upgradedrc3697

4 жыл бұрын

kzread.info/dash/bejne/Z52kks2zdbTdYc4.html watch this video

Can you help me out? My buddy has this remote and faded out revers and can't figure out how to get his reverse back? Please help

@upgradedrc3697

2 ай бұрын

I'm not sure what he did. Check your travel percentages and make sure you have some on reverse, also check your rates, trims and sub trims. Without seeing it and going thru the menu it could a lot of things

on a DX3, there is a switch to select 50,75 and 100% throttle. Is there a way to set something like up on a DX5?

@upgradedrc3697

Жыл бұрын

You could set up one of the switches to give you 2 options

Ok. Bought this radio and it came with the avc receiver. I’m running it in an SCX10 iii. If I want to use aux1 and aux2 for my dig servo and 2 speed tranny servo I need to disable the avc thru the receiver? The manual isn’t very clear on this.

@upgradedrc3697

3 жыл бұрын

Yes,AVC is automatically assinged to Aux channnel 1 and 2

@upgradedrc3697

3 жыл бұрын

Disable AVC to get more Aux channels.

@silverrick90

3 жыл бұрын

Thanks soo much! Your vids really help out for someone new to these radios and receivers!

Is there anyway to disable reverse for racing on this remote?

@upgradedrc3697

4 ай бұрын

Yes, open up the menu and select travel, then select throttle. After that select the rev ( which is usually labeled L or H ). Now take that parameter all the way down to 0 and leave the other one alone. You should now have 100% forward and 0% reverse. Hope this helped you out! 😎🤙

Can you troubleshoot why I can't get my telemetry to work?

@upgradedrc3697

Жыл бұрын

The Dx5c is Not set up for telemetry. You could try and do an update thru the data port, but I don't think the screen will support telemetry.

Can u explain how to set the dial control on the back right side of the controller on the DX5pro for on the fly steering control trim , instead of going thru the menu and then setting the trim? The manual that came with the controller is somewhat lame and does not explain this! I am going to assume it can be set for on the fly trimming, but I am at a loss as the manual does not explain this.

@upgradedrc3697

Жыл бұрын

The stock default button is B for the sreering trim. You can change this to any button that is not already assigned to something else. Adjust your steering trim one click at a time while driving slow in a straight line on flat ground. You will need about 30 feet. Hope this helps 😎👍🤙

This was so helpful. I run a Hyperdrive Spec 7 Pan car with a Hobbywing XR10 esc and a 17.5 brushless system. What do you recommend for steering and throttle settings for carpet racing ?

@upgradedrc3697

2 жыл бұрын

Does your receiver have AVC or do you have to disable it for your competitions?

@acdfus

2 жыл бұрын

@@upgradedrc3697 No it has the Spektrum SR3100 DSM2 receiver for DX3R DX5C remote control.

@upgradedrc3697

2 жыл бұрын

It's pretty much up to you and the way you drive. I would full rates of 100% on steering and throttle. Maybe adjust your exponential throttle rate for the most consistent throttle control and practice your driving style until it feels smooth and in control

@acdfus

2 жыл бұрын

@@upgradedrc3697 We run a pan car class on a 132 ft carpet track. If you go faster that 4.2 sec your lap does not count. I will try your suggestion and see how it work for me. Again thanks, and if you know anything else about this please reply.

Great video man so I have a question so what is better for drag race should I turn off expo or leave it on and set it negative 4 or what’s best to set it

@upgradedrc3697

2 жыл бұрын

I'm thinking Neg 2 would be pretty aggressive. Neg 4 might be to uncontrollable for the launch, but if you can control the launch then Neg 4 would be your best bet. I would also turn the throttle travel up to 150%. I don't know how you are stopping, but turn your brakes down or it will be a violent stop ending up in a crash. And if you can adjust the timing on your motor up to 6%. Hope this helps, you will have to play with these adjustments to dial it in for the way you drive. Also set up your suspension for stiff in the rear so it won't squat and aborb all the power on your launch. Front should be medium. 🤙

@marcusclements6877

2 жыл бұрын

@@upgradedrc3697 thanks so much buddy I already did everything but the expo so ima start out with negative 2 cause I’m running xlx2 1717 motor but not gone put my kv out there LoL

Awesome review. Thanks for that. I have a question that might sounds stupid to you. What ESC are you running with? After binding I have no throttle nor breaks. I have a hobbywing esc. Thanks

@upgradedrc3697

Жыл бұрын

I'm running a Spectrum SRS6000 with AVC. Make sure you calibrate after binding. Hobbywing should work fine as long as your receiver is DSMR

@art.alagna.design

Жыл бұрын

@@upgradedrc3697 yeah, sorry. I should have said after binding AND calibrate...all parameters on the esc are at 100% ....still having no throttle nor brakes. Thank you

Hi, my DX5C only has framerates of 11 and 22 ms (version 1.08 region EU) the description of the transmitter in different websites says that is compatible with Dsm2 only in 16.5ms so i was wondering if by any chance you know if theres an option to select 16.5 ms in framerate? Maybe a secret menu or something to change between dsmx and dsm2. I bought my transmitter only to use it with my dsm2 receivers! Thanks.

@upgradedrc3697

2 жыл бұрын

You could try updating it with the data cable you'll have to buy. But I'm not sure if that will work.🤔

I need help with my aux channel's they adjust my reverse when I use my winch and the steering when I use my horn

@upgradedrc3697

5 жыл бұрын

Just rest the channels for what you want them for!

This is the best tutorial I’ve seen on the DX5 Rugged. But I have a quick question. My Kraton pulls left and steering looks like it’s off to the left, where do I go to center it (by adjusting steering to right)? Also, can that trim setting by set up on a manual button (similar to RTR transmitters)?

@upgradedrc3697

3 жыл бұрын

On the top of your steering wheel you have 4 switches A, B, C, D. B is your steering trim adjust slowly until you get it straight.

@rungunrc1306

3 жыл бұрын

@@upgradedrc3697 oh nice! And that doesn’t have to be set or assigned?

@upgradedrc3697

3 жыл бұрын

Nope, it is preassigned as steering trim and A is your throttle trim C and D or open for you to assign.

@rungunrc1306

3 жыл бұрын

@@upgradedrc3697 thank you for this info!

I'm trying to figure out how to use my DX5C, especially the aux functions, but at 42:20, you just glossed right over it. Is there a video series that actually explains all the functions? I've been looking for days.

@upgradedrc3697

11 ай бұрын

Sorry

How do I set a break like my old traxxas remote so I have to double click to hit reverse

@upgradedrc3697

4 жыл бұрын

I don't think you can, but u can fully adj your reverse and brake, and how fast they react with each other with travel and exponential adjustments.

Hi there! I'm not sure if you're going to see this comment or not, but I am wondering if you know what thr RF Quality page is on the transmitter? There is a capital letter F: and H:. Thank you in advance!

@upgradedrc3697

Жыл бұрын

Not exactly sure about this selection. But, RF quality is measured in Hertz. I believe F is a lower amount of hertz. The H is for High frequency. 🤔

Hi, can you assing the knob as the "trim set up" switch for the Steering channel? I found more confortable to adjust the knob while the vehicle is advancing to correct its direction if there is a deviation. Just like the Traxxas TRX4 it works with the knob. Can this control use its knob as well to adjust its steering? Thanks!

@upgradedrc3697

5 жыл бұрын

I'm not sure which knob you are referring to , but it's adaptable to any switch!

@CarlosPerez-xx9gl

5 жыл бұрын

@@upgradedrc3697 ...sorry, I was confused with the dx5r which has a knob in the side. But I just tried to assign it as a steering trim but it can't be assigned. Only to aux channels. Thanks anyway!

Have you ever ran into this issue , I installed the srs6000 into the Kraton and since the rec.box is so small the receiver is set on its side. i bench tested after calibration and all seemed to be working correctly , but upon test drive every time i wen to half throttle the car turned hard right , turn down the avc on steering to 20% and throttle to 5% and it still did the same thing so i never could figure out why it was doing this !!

@darksiderc3406

4 жыл бұрын

Mine does that and I have mine installed flat. Not sure what I have done wrong

Will this remote work with a traxxas tqi receiver that has traxxas stability control?

@SebastianLong

4 жыл бұрын

No. Traxxas receivers only work with Traxxas transmitters. Spektrum receiver with Spektrum transmitter. Futaba receiver with futaba transmitter. So on and so forth.

Is there a part 3 for the rest of the list?

@upgradedrc3697

4 жыл бұрын

Hopefully real soon