This has been the most in-depth, informative video series on the features and capabilities of the SPEKTRUM DX5C that I've found. Your explanations of what all of the different settings are for have been invaluable. I really appreciate your having taken the time and energy to teach us "noobs" something new. Thanks!

You broke down the manual easier than I can and taught me a few things I didn’t know about it myself❤️Great Videos👍

@upgradedrc3697

3 жыл бұрын

Thank you Sir, I appreciate that!

This is probably the best review of any product I've ever seen on the internet!!! Brilliant extra information on the Traxxas receivers etc... Outstanding!!! Subscribed!

@upgradedrc3697

4 жыл бұрын

Thank you. I try

I want to thank you very much for the fantastic and calm and very understandable way in which you explain everything. you have helped me fantastic to set up my new arrma infraction truck together with my spektrum dx5c .. really fantastic ...

Dude, you do an awesome job of explaining the functions of the RC world keep up the good work I have watched several videos on how to use on KZread and you are the best you got my subscription

Brother, thank you SOOO MUCH for this video!!! I just got back into RC after 30 yrs and man, stuff is waaaaay different then when I was a kid/teen. I just picked up the Arrma Typhon 3S and this exact remote with the 6100AT receiver. Ran it one time after installing receiver and upgraded steering servo, changed battery after 1st run and receiver stopped working. And you're right, I set up the receiver in a different position after initial launch lol. But thanks, this video was exactly what I was looking for!!

Best videos on the DX5c and I recommend anyone with this transmitter to watch and part 2❤️👍This is a great unit and use for all my RC’s💪🏁

Thank you ! i learned how to set my DX5C...failsafe / frame rates (11ms) i use it for 3-nitro cars using the new press down bind button receivers & the rest are basic .I use the buttons A-B-C-D for assigning functions / say- A=steering /B=throttle /C=brake ( Nitro car)..i did the timer as well. This is very helpful..Thanks !

Appreciate this video my man!! Helped me out like no other. Well explained and nice on the detail..

Great instructional video, this is the transmitter I am buying and this helped a ton. Thanks for sharing.

Thank you. Been having “drunk steering” problems with a scale truck. Also had assigned aux 1 and 2 to E and F. Cutting the plastidip off and starting over. Disabling the AVC all together.

Great video series very helpful. Thanks

Trevis let me tell u this has helped ALOT now my rig is my own and not how the factory intended

I purchased five spektrum SR6100AT to fit them in my cars and use them with the DX5C but they are not good because I couldn't use the AVC and had to make the settings to the lowest possible from 3 to 5%. I realised this when one of them wasn't binding and I replaced it with the SRS6110AT and I could adjust the radio settings around 75% and could also use the throttle AVC with the DX5C and the cars moved in a perfect straight line without wobbling. I tried to make contacts to see if they can replace them or give me a good offer but up to now nothing! We spent thousands of euros on this hobby and we should be treated better in my opinion!

Thanks. Was having a hard time binding. This helped.

11:53 my god, what an awesome location to drive RC's! We don't have anything like that here in AL, just loads of trees and undriveable thick brush.

This was a great video, I have a Typhon 6s with the 6100at receiver and found that if I mess with the AVC setting in the remote/transmitter it conflicts with the receiver factory set AVC so I had to turn off any input to stop the transmitter and receiver from fighting each other. When in conflict with each other the receiver tries to straighten out the steering when the steering wheel on the transmitter is almost back to center which creates a crazy zig zag RC.

@LulaPlays

3 жыл бұрын

I have a limitless with the 6100at...are you saying you basically put all numbers to 0 in the AVC portion on the remote? or did you just set AVC to Inh on the remote?

Your a very good teacher. You helped me immensely. Thanks, I’m new to the sport would you tell me what brand and model of vehicle you used on the table during your video?

@upgradedrc3697

3 жыл бұрын

Brand and model of radio? Spectrum dx5c. Or the car, E Revo 2.o by traxxas

Awesome job,,,really really help out,,, perfect info

You are the only one !!! Thank you for showing where the wires go “on the Receiver” … You’re the only one I found that did it … All the other instructors are brain dead !!! But why the frick didn’t Spektrum put the word “Bind” on the receiver ????? 😡😡

@t-gill9771

3 жыл бұрын

Don’t get discouraged Guy it’s seems very complicated at first I got discouraged also after crashing five maidens it wasn’t a good feeling butt once you figure it all out it may take you a while it took me four months but now everything seems pretty easy after watching 15 videos now I’m re-programming all my planes to fly the way I like them too I love it it’s awesome I could program all my buddies planes Also it’s easier to show someone in person exactly what to do you just have to know where to go and what to do hang in there you figure it out “you could do it “ pilot Brian Phillips favorite quote

Concerning what you said at 33:39-43 on your video (about the necessity to re-bind after changing the steering travel and/or the throttle travel), before I watched this video, my Hobby Shop had already performed the BIND for my Spectrum DX5C transmitter while the STR TRAVEL and the THR TRAVEL were both set at 100%. I re-set the TRAVEL for both the STR and the THR to 70% (without RE-BINDING, because I didn't know any better at that time) yet the RC CAR continued to work perfectly (with the AVC) at the 70% throttle and the 70% steering without re-binding.

@upgradedrc3697

4 жыл бұрын

Thats great, keep using it then . The book from spectrum says to rebind after adjustments changing the travel, reverse setting, or want to use the receiver for a different model memory. If it and the Avc are working properly just go with it.🤘

Thank you so much for your video. Helped me way more than everyone else. I was forced to set up the dual servos on my e revo 2.0 with the first steering servo in steering port and the second steering servo in AUX 3 of the AVC 6100 receiver. I set the transmitter with the dual servo mix. And have AVC transmitter setting to ON. Throttle and dual steering servos all work when using steering wheel and throttle trigger. But for some strange reason , only the one servo responds to the avc gain. The other steering servo has no avc active. Both steering servos work perfectly when I turn the steering wheel, but avc only works on the one steering servo and not the other. ( I tried using a Y lead to make the servos use only one channel, but was almost impossible to get the leads to fit under the receiver cover ). Any suggestions how to get avc working on both servos ? Should I try plugging second servo into aux 2 maybe ? ( I did read that aux 2 is for gain, so chose aux 3 instead ). Once again, your video was excellent. Any help would be greatly appreciated.

@upgradedrc3697

2 жыл бұрын

I'm using a Y lead and it works great. I wouldn't use another channel.

Dec 4 2022 you are a exelente explanation 🙌

Thankyou! Sir this saved me Thankyou so much!

A very good video as I was thinking of getting a drag car and they use AVC.

Massive thanks for the in depth review on how to this Spektrum DXC5 transmitter works!!! Question, I have binded everything but my Notorious 6s Arrma Stunt Truck but it still does not want to drive straight it just want to drives to the right a tad bit not a lot but a little. Do you adjust the Sub trim to make it drive straight - Any recommendations would be greatly appercaited?!

@upgradedrc3697

4 жыл бұрын

You could add a point or two to the sub trim , but there are other ways to attack it. if you watch #2 video on this, I explain it pretty good around 6 mins in or so. but, make sure all your bearings and caster, camber, toe in and out etc are dialed in before you go to far out from center on trim points. I have a great video on adjusting camber and stuff also. Good luck brother!!

Thanks a lot . My AVC is on point now 👊👍

Thanks love it, awsome thanks again ❤️

THANKYOU. FLYSKY NOBLE HAS SINCE WON MY ❤. ESPECIALLY FOR THE $.

what a perfect video, thx!

Hi brilliant video I have the dx5 rugged, and just purchased the Arrma Fireteam, I want to assign aux 1 to button G for handbrake which is not a problem, but can I assign another button D for the timer Thanks Carlo

@upgradedrc3697

2 жыл бұрын

Yes, if you go to the menu and select "Timer", you can select D or any other channel that is not being used by something else.

@carlorc6385

2 жыл бұрын

@@upgradedrc3697 Brilliant thank you very much for your help, your original part 1 and part 2 are on my favourites, the best video so far explaining about the DX5👍👍

#UPGRADEDRC - Many thanks brother for the in depth Tutorial on this complexed Transmitters!! I was able to bind my #6s #Notorious / #6s #KRATON with SR6100AT receivers along with AVC Technology w/ no problem!! You made it a very easy to understand all of the options and menu's that can be a bit confusing if you never have owned one! I have a question since I went with the SR315 DSMR 3-Channel Sport Receiver for my 3s Typhon which would be model # 3 on my DX5C receiver. Instead of a bind plug for the SR315 DSMR 3-Channel Sport Receiver you just hold a button which i did and completed the bind mode and name the model TYPHON and everything worked perfectly for my 1st session ok!!! Now before i WENT out for my second speed run I went to punch level to 5 instead of the default setting from the factory which comes at 3. Ok no problem, got it to punch level 5 and went to turn on the DX5C w/ SR315 DSMR 3-Channel Sport Receiver and for some odd reason I can not turn the steering from right to left. My servo seems to work just find but it seems like it does not have enough torque to turn the servo saver arm since it turns but only 20% instead of 100%! The Throttle works and forward and reverse W/ NO PROBLEM but cant get the steering to turn my wheels. You can actually hear my Savox servo trying to turn my HR bellcrank but it just seems like it does not have enough power to turn my wheels from left to right all of the way! i HAVE TRIED TO rebind it with a new model but still cant get those wheel to turn like the every first run! Could it be my servo horn but whats wired is everything worked the first time WHEN i FIRST BINDED the SR315 DSMR 3-Channel Sport Receiver w/ my DXC5 Transmitter! I am clueless and could use some help, it would be greatly appreciated.

@upgradedrc3697

4 жыл бұрын

Did you turn off the AVC? It will not work with the sr315 and can cause problems usually with the steering.

great video

For AVC to be disabled the second bind plug ( aux4) must stay in after binding... for the same reason you mentioned ...in competition it easier to prove its deactivated just by glancing at the receiver and seeing the plug

@cameronjurow2724

Жыл бұрын

🍳🌊🍋🌈🍊💨⚡️

@cameronjurow2724

Жыл бұрын

Dr😊c L😊 B Hern

i just got one sure like it very light and nice made

I like your vid it help me i just got one

i am kinda newer to crawlers and surface vehicles. what brand of rx s are able to bind to this radio. i know several brands of rx s will bind with spektrum plane fadios. also lets say i buy another brand rtr vehicle and want to use this radio. do i have to change the rx to a spektrum?

Great video and it's a great alternative to stock traxxas. I have 1

@upgradedrc3697

5 жыл бұрын

Thanks brother 🤟

Glad I got this one over the rugged one

Top job very well explained thanks nearly lost all my hair 😂

just unboxed it, thanks.

Thanks a bunch!

Hey thanks for the informative video. Just bought this transmitter with the SR415 receiver. For no.6 in binding, "move throttle channel to the desired failsafe position" is that just neutral? Or am I supposed to hit full brake?

@yaffajaff

4 жыл бұрын

If the failsafe is set to full brakes, won't that risk my car from flying off in reverse if it lost signal? My ESC is set to FWD/BRK/REV

@upgradedrc3697

4 жыл бұрын

It is a little bit deceiving in the book, but it is preset for you already

@yaffajaff

4 жыл бұрын

I see, although the throttle channel was reversed so I had to rebind anyway So I set a bind for a full-brake failsafe to test if my Arrma Notorious would fly off in reverse if I turned my transmitter off. It enabled the brakes when the car was in forward throttle mode at the time I turned the transmitter off, however the car DOES fly off in reverse when you're reversing the car at the time of radio loss 😵😵😵 unlikely as that is Not the radio's fault, I'm guessing all radios have a failsafe that works like this because they can't differentiate between brake and reverse, but this is why I set the failsafe to neutral instead of full brake, I'd rather the car stop by hitting a wall than risk watching it from a distance going on a reversing rampage lol

The DATA port makes for a nice Binding Plug storage...always have it with me...

Subscribed!

Dear Upgradedrc. I bought both, the DX5 Pro and the DX5C both transmitters says they are compatible with DSM2 in the 16.5 ms. Frame rate, but non of them would let me select that frame rate because it doesn’t show on the screen. They jump from 11 ms. to 22ms. With out showing the 16.5 ms. Option. Could you help please? I all ready dig all internet and no information found.

@upgradedrc3697

Жыл бұрын

What knid of reciver are you using?

Thank you

HELLO UPGRADED RC WHERE DID YOU BUY THE GRAPHIC IN FRONT OF THE SPECTRUM BOX ???????

@upgradedrc3697

2 жыл бұрын

I think it was Autozone

What it the blue traxxas support bar part number? Looks like a good support

@upgradedrc3697

3 жыл бұрын

Tra5632 rear aluminum support bracket in blue. $10.00

I have all wheel steer rock boncer my receiver went out can I just use 3 channel receiver on the dx5c and if so will it work with off brand receiver

@upgradedrc3697

5 жыл бұрын

Honestly I'm not sure. But i would think so with some adapters maybe.

My friend I need some help. I just bind my spectrum DX5C to my Outcast when I turn right it goes left. When I turn left it goes right need help

Thanks.

Hi there. Hopefully this message gets seen. So a strange thing happend. I turned on my kraton for first time in maybe 6 months. So Dx5c on, car on… now usually you have the common 5/6 beeps the car does before its ready to go. But now it does like 2 beeps then the fan slows down and its just idle. But check this… if i turn my steering full right lock it ramps up the fan again, the beeping resumes as normal and then its ready to go. It will actually drive (but only in full lock to the right😰) when i let go of the steering wheel the the fans slow down again and the car is idle. Any idea how to fix this bizarre problem?

I bought a used one since I can’t afford a new one. Well so far I can’t get it to bind. I did fix my DX3c but the steering wheel spring I replaced is a little too stiff so I got the DX5c but it won’t bind.

@upgradedrc3697

Жыл бұрын

What kind of receiver is it

When the AVC thing came out I got my pants pulled down with an AVC receiver and Spektrum/Horizons usual small print bs. What they basically mean with their AVC receivers is that you can have the number of channels advertised, or AVC, but not both.

@upgradedrc3697

2 жыл бұрын

Exactly, don't know why they did that!

Can the timer button be reprogrammed to be used for the handbrake?

@upgradedrc3697

Жыл бұрын

No, for some dumb reason you can only use that button for the timer

hello there if your motor has to much power what button do you use to lower it ?????

@upgradedrc3697

2 жыл бұрын

Under Travel go to throttle click on it and adjust the high to your desired setting.

I didn’t need a bind plug with my kraton?

I'm curious what are all the cans of ed and such used for are there lil trick uses they are used for ?

@upgradedrc3697

4 жыл бұрын

I'm sorry, i don't understand the question you are asking me?

Another question is the smart receiver Compatible with any moter controller with or without the telemetry ?

@upgradedrc3697

3 жыл бұрын

Almost all ESCs will work with any reciever, but not all reievers will work with other telemetry.

I'm having a problem with setting up my aux option on my radio. Any suggestions would be much appreciated. Great videos btw

@upgradedrc3697

4 жыл бұрын

What problem are you having?

How do you set failsafe on AVC receiver ?

Does this transmitter read out telemetry?

how do i address my steering from the start after binding and calibration. its not going straight or should it be.

@upgradedrc3697

3 жыл бұрын

Adjust your steering trim until its straight.

Did you ever do that video on "mixing "? If so is there a link please?

@upgradedrc3697

2 жыл бұрын

Sorry, have not done it yet. If I had an RC that required mixing, then I'd have some knowledge to offer you. At this time I do not.

I think I found why it won’t bind but I will have to wait till the morning. I didn’t set the frame rate since I’ve never ever had to do it. I’m old school and all my cars are over 10 years old and this technology didn’t exist for the common basher.

I was really pumped to use this but I guess it doesn't do what I thought it would. Setting endpoints, what my TQi wouldn't do on my Stampede 2WD because my servo is in reverse, no problem. But everything else... is really weird. I was hoping I could set the throttle travel/rate to something lower so when kids ask to play with my RC car it doesn't haul ass but when I reduce either one I lose the ability to brake.

@upgradedrc3697

4 жыл бұрын

Use the exponential and servo rates to slow down the aggressiveness of the beast. Works great for my grand kids

BOODS FEEL EVEN BETTER IN MY HANDS

I have the Bronco and the blazer I installed the DX5C into the Bronco and to the Bronco and the Bronco is slower than the blazer in both gears could that be something that has to do with the radio?

@upgradedrc3697

2 жыл бұрын

It's probably different motors, gearing, esc, etc. But, there are rates that can be turned up on the radio. All the rates are at 100% default when you un box the radio. The video explains it well, just watch both parts all the way thru.

@gregoryduvall4758

2 жыл бұрын

Both stock,other than tx and rx, I will re watch the vids, thank you

Can this be used to turn off and on LED lights on my Gen 8 if I want to?

@upgradedrc3697

5 жыл бұрын

Yes

The stock remote for the arrma infraction has 3 options for the speed, how do I adjusts those options after binding to my smart remote?

@upgradedrc3697

4 жыл бұрын

Sorry I honestly don't know

@LulaPlays

3 жыл бұрын

@@upgradedrc3697 He is talking about the throttle limits...the DX2E Active control has a switch for 50/75/100.....I too am watching this video to see how to adjust these on the DX5C.

@LulaPlays

3 жыл бұрын

did you ever figure it out mo Hawk?

@upgradedrc3697

3 жыл бұрын

@@LulaPlays ?

New to the group and have been having a bit of an issue trying to incorporate my winch to my radio system without having to get a separate control box. I'm running the spektrum dx5c with the sr415 4ch reciever is it possible to do what I'm trying to do and operate the winch off one of the 2 auxiliary channels open on the reciever?? Any help will be greatly appreciated

@upgradedrc3697

4 жыл бұрын

Yes, you should be able to use an auxiliary channel for your winch.

@chadcheney7597

4 жыл бұрын

@@upgradedrc3697 can you please tell me how to do it with the dx5c transmitter? I acquired it with no manual and don't have the paper to print it out off the net

@upgradedrc3697

4 жыл бұрын

@@chadcheney7597 plug in you winch to an auxiliary channel. Then select that channel on the radio and assign a button or switch to operate the winch. That should be all you need to do.

I have a dx5pro. I am using lights for my aux1 and aux2. Your review I think just confirmed that it's not possible for me to turn the lights on and off upon demand. Is this true?

@upgradedrc3697

4 жыл бұрын

No, you should be able to.

@dynasty4851

4 жыл бұрын

@@upgradedrc3697 how would I be able too? Should I make a video to show you?

@upgradedrc3697

4 жыл бұрын

You should be able to plug lights into receiver aux, pick button and assign it to the lights.

ahhh makes sense, and of course I used hook and loop lol

I updated my rx sr6100AT and when I try an bind I can't calibrate When I see it bound I proceed to set the throttle and brake and the truck takes off. I read the change notes and it says auto calibrate but I see nothing in the notes that says to do anything different in the binding process please help if you can

@upgradedrc3697

11 ай бұрын

Try unplugging your esc from reciver and bind first, then connect to esc and calibrate.

@m.g.5477

11 ай бұрын

@upgradedrc3697 okay thanks I will try this and see if this will allow me to do it correctly 🙂

is there a radio that is not so confusing? was condidering futuba

@upgradedrc3697

3 жыл бұрын

In my experience Futaba is more cpmplicated.

Where'd you get that deal at I bought my d r x r 4 Pro 4 years ago and it was almost three hundred bucks

@upgradedrc3697

4 жыл бұрын

At my local hobby shop

I have the sr6100at receiver and can't calibrate the throttle. When calibrate steering R N L it's good but I can't calibrate the throttle. Pull back to full throttle nothing back to neutral nothing full brake both throttle and neutral say ok but motor won't spin.

@upgradedrc3697

4 жыл бұрын

It took me acouple of times also. I found that it was all about the pause inbetween throttle and brake. It's a littlebit tricky.

I did the bind just like you explained but i can not get reverse to function just forward and break but i do have the 6100 not the 6000 does that make a difference

@upgradedrc3697

2 жыл бұрын

No, try adjusting your reverse. make sure the rates are up to 100%

@keithaseelye120

2 жыл бұрын

@@upgradedrc3697 i did and still no reverse i even disabled avc i also did a bind to my 3s senton with a 3 channel spectrum receiver and it worked fine it just wont work with the 6100 i am at a loss it even seems i have a loss of power when using the dx5 on my kraton changed back to my dx3 and it runs great still using the 6100

@upgradedrc3697

2 жыл бұрын

Huh, have you done an upgrade using the data port? It seems weird to me, I have binded with lots of different recievers and had no problems.

@keithaseelye120

2 жыл бұрын

No have not ever done an update im still fairly new at this going to start from scratch again in a few days after i enjoy some bash time using my dx3 trans then ill give it a go one more time for now the dx5 is working great with my senton and i think ill set it up with my second kraton. That one has spectrum esc and see if it works on that first

@keithaseelye120

2 жыл бұрын

Oh and a big shout out to UPGRADED RC for the very well done tutorial vids and trying to help me out ill keep ya posted on how this turns out ill probably do an update as soon as i figure out what all i need to do

How would this compare to the rugged version?

@upgradedrc3697

3 жыл бұрын

Almost the same except for the rugged case and the selector buttons instead of the thumb wheel which lots of people hate Lol!

Can this version of the transmitter display telemetry data?

@upgradedrc3697

2 жыл бұрын

No

@MetalModelMaster

2 жыл бұрын

Damn, alright. Appreciate it sir

Is it possible to run the dx5c off nimh batteries instead of aa ?

@upgradedrc3697

5 жыл бұрын

Honestly, i'm not sure

@Nuts-N-boltsinurmouth

5 жыл бұрын

@@upgradedrc3697 I found out I can I just need to solder a connector on to the wires. Going to use a 4.8v 2000mah nimh pack.

Can not believe the price has gone up so much.

I got dx4 r pro its old but I like it.

How do set up the fail safe on this remote

@upgradedrc3697

3 жыл бұрын

If you leave it centered it sets it self. Just forward, reverse, center, release. its automatic unless u change it.

Can I reverse my steering on this remote

@upgradedrc3697

2 жыл бұрын

Yes, go to reverse on the main menu, then just pic steering and click on it.

Your help would be greatly appreciated as per post just below.

Savox steering servo wouldn't extend all the way....100%-150% no diff....turned out to be frame rate. Was set at 22. Thank you sir.

Thanks. I did not understand frame rates. Time to rebind at 11, my Reefs should perform better.

Great vid and have a question as to why when I Set my DX5C SPECTRUM in Aux assign i want to assign Aux 2 for my dynamite kill switch but it keeps going back Aux 1 for some reason...WHY is it doing the after i set it to AUX 2...Why

@upgradedrc3697

3 жыл бұрын

Do you have AVC. Is it on and automatically assigned to aux 2?

@kennethcombs4419

3 жыл бұрын

@@upgradedrc3697 I have been trying to disable it in transmitter and binding using 2 bind plugs my transmitter is also making a repeated sound when squeezing the trigger on my Dx5c spectrum or using the brakes

@kennethcombs4419

3 жыл бұрын

Should I just use Aux 3 which is not assigned to anything

@upgradedrc3697

3 жыл бұрын

@@kennethcombs4419 trying to disable what? and why are you trying to bind with 2 bind plugs?

@upgradedrc3697

3 жыл бұрын

Yes, just use Aux 3

How much do they cost to buy and wots the range on it

@upgradedrc3697

4 жыл бұрын

I paid $129,00 @ the local hobby shop. The range is a lot farther than u can see. About a mile i think.

Should AVC be used in a crawler?

@upgradedrc3697

3 жыл бұрын

You know, thats a great question. Some people will say yes, and others no. I don't vuse it in my crawler. I found that a smaller pinyon gear will give way more control at slower speeds than AVC. So i guess it's up to you.

@jaredsay3331

2 жыл бұрын

I do not use AVC in any of my crawler but my basher yes and my drift cars and if your racing drag car you shouldn't but if your just missing around yes

whats range on it? does it have a anolog throttle limiter ?

@upgradedrc3697

3 жыл бұрын

No. Analog theottle limiter. Distance is around 1/4 mile

@MrGirodog

3 жыл бұрын

UPGRADED RC thanks , is it more responsive that SXT 2 and is there a throttle limiter at all ?

@upgradedrc3697

3 жыл бұрын

Yes, it is more responsive. But does not have throttle limiter

@upgradedrc3697

3 жыл бұрын

But, you could turn down the rates and limit the throttle that way.

@MrGirodog

3 жыл бұрын

UPGRADED RC EPA ? Lot of them have it now . End point adjustment

I own Spectrum DX6R DX5C DX4C dX2E and I have a spectrum case

So I can bind my car and calibrate the esc but when I power it off and then go to run it again I have to re bind because the transmitter or my reciever doesn't respond.

@upgradedrc3697

2 жыл бұрын

What receiver and transmitter are you using?

@MetalModelMaster

2 жыл бұрын

I'm using the DX5C and the SRX200 reciever.

@MetalModelMaster

2 жыл бұрын

I just upgraded my reciever and it fixed the issue.

@upgradedrc3697

2 жыл бұрын

@@MetalModelMaster That's great to hear. Glad it's fixed for you.

Light on display

since switching to this remote none of my cars go in reverse and have no brake.i cant calibrate any of my esc's, when I go into full reverse the esc wont recognize. how do I fix this?! ive only used stock transmitters so im totally lost

@upgradedrc3697

4 жыл бұрын

Check your servo travel and rates. Make sure their not all the way to one side having more travel than the other side. Does the esc bind well with the radio?

@99ville

4 жыл бұрын

Yes it binds well I just can’t calibrate my esc

My baby touched something now my throttle is reversed. Pull for reverse and push out for throttle how do I fix this

@upgradedrc3697

2 жыл бұрын

On the main menu select reverse, then scroll down to throttle and switch it back to normal. Super easy.😎👍🤙

Channel A is now my throttle!! Instead of throttle rate

How to I turn down my Brake since its set at 100%?

@upgradedrc3697

2 жыл бұрын

There is no drag brake on this radio. The brake is controled by the esc being programed on some esc and others have pin that can be changed from 100% to 0% in increments

@FLSharkdiver

2 жыл бұрын

@@upgradedrc3697 Thanks but I figured out how to turn down brakes on my Radio from 100% to 60% for my ARRMA Infraction ..