He is gonna go ahead and we can not stop him :) After more than a year the video still helps well 😎

There is a major miss for phase 2. The rib offset 4mm instead of 1mm from the slot back face. Phase 1 was extrude offset from the plane, which is 3mm. There is no way to make the change from 3mm to 6mm for individual configurations. How to solve that?

Hot to set dimension arrow mark as shown on your video? its simple and easy to understand. Mine is long arrow to the pointed circle.

I have a question: I need to make conveyor belt which is moved by a crankshaft One the crankshaft there are 2 pulley on the edges that transmit the motion . So here goes the question: i need to block those 2 pulley, do you have any suggestion to how to do that, i was thinking of putting 2 circlips on the edges of the pulley , do you think it will work?

How to set dimension arrow mark as shown on your video? its simple and easy to understand. Mine is long arrow to the pointed circle.

Interesting that I keep getting slightly different results on the FOS and von Mises stress levels. 2.823 and 4.306 for the FOS (both configurations) and 8.164 on the von Mises on the first configuration. The stress points are in the same place though and the model is exactly the same. A puzzle. Great videos though.

çap ölçülendirmesi yaparken çapı tek okla nasıl gösteriyor? belge özelliklerinden baktım bulamadım o ayarı

How did he moved offset arc in 4:12 ?

what are you pressing to bring up those "on the fly" menus? Space bar and right click? If so, which one does which?

@ricklkkwok

7 жыл бұрын

You have to enable Instant3D

@idymary8878

5 жыл бұрын

then...after enabled it, what do we have to do?

How is it that you can give SolidWorks the dimensions as soon as a sketch is drown instead of going to the smart dimension tool?

@OktoPutsch

9 жыл бұрын

the keyboard entry is binded to the related function applied, so the dimension is updated. Just valid with and you're done.

so the cilinder and the middle part are at a 3mm offset, but you create a 4mm radius fillet. My CATIA just went "boom!"

Hello . I have a question which I invented a machine which is the heart of the pulsed electromagnetic energy that converts energy and Ultra Violet light into electrical energy needed to design this project and through your channel. Is there any of this matter is the legal way that preserves human rights in the project. Thank you .

I ran the simulation. But at the same simulation advisor menu, i cannot find the FOS.

@solidworks

4 жыл бұрын

Hi xujie! To learn more please reach out to MySolidWorks forum: my.solidworks.com/forums.

At the end, all I got is 2.86664 as a FOS output (fos cıktı:)

If you wan to build a significantly stronger version of that part while keeping the weight same or even make it lighter, then use a parabola or a combination of two invert large radii plus a middle small radius near the main body to mimic a parabola shape. i.imgur.com/3k7l7h7.jpg

how to set that visualization of the piece ? my render is whitout shines

@solidworks

7 жыл бұрын

If you've already set the material correctly, the Display Manager settings can be used to create an additional effect: help.solidworks.com/2016/English/SolidWorks/sldworks/c_management_panel.htm For more detailed help, feel free to post to the MySolidWorks forum so our experts can provide assistance! my.solidworks.com/forums

@davidgarza3769

7 жыл бұрын

thnks!

what is it with Americans and their love affair with saying "I'm gonna go ahead and.."

@hans_____

3 жыл бұрын

It's English speakers in general.

@john_p

3 жыл бұрын

@@hans_____ I've never said it and I'm a native English speaker

@hans_____

3 жыл бұрын

@@john_p I should have said "there are English speakers from countries all over the world who say it, not just Americans" - and not "every English speaker says it." But yeah, this guys says it way too much.