SolidWorks | Three Productivity Tips | Assembly
#SOLIDWORKS2021 #LearnSW #Beginners #5tips
Watch my webinar ▶ bit.ly/SCPNewSeries
Here are three productivity tips for SolidWorks Assembly.
In this video I cover:
1- Pack & Go
2- Creating a New Part in Assembly
3- Flexible/Rigid Sub-Assembly
Also here are my mini-series if you want to learn SolidWorks
Mini-Series:
Episode No1: • Ultimate SolidWorks Tu...
Episode No2: • Ultimate SolidWorks Tu...
Episode No3: • Ultimate SolidWorks Tu...
Episode No4: • SolidWorks 2021| Begin...
Пікірлер: 41
Watch my 1-Hour free webinar if you are a beginner here >> pages.solidworkstutorials.net/comments
Nicely done! Keep them coming!
Ryan, thank you for this! 🙂 👍
Thank you, I really learned a lot from you. healthy and success always for my idol Aryan.
@with-Aryan
Жыл бұрын
thank you!
Awesome and amazing video Sir. I love it
@with-Aryan
2 жыл бұрын
So nice of you
Excellent as always! Thanks
@with-Aryan
2 ай бұрын
Thanks again!
Nice Video!
that was so useful thx for you effort 🥰
@with-Aryan
Жыл бұрын
You’re welcome 😊
You are GOOOOD!!!!
@with-Aryan
3 ай бұрын
Thank you!!
please master,.give me how solustion,..when i try to assembly 2 part and insert that file,but the one of file look not same wehen i sketching before,and i can't to do mate 2 a part because different scale / dimention TQ.
@with-Aryan
7 ай бұрын
hard to know what's going on. you wanna send me your part to info@solidworkstutorials.net?
How do you get the origin of the parts that are modeled inside an assembly to be in the normal position? When you model new parts inside an assembly the origin is way off from center of the part.
@with-Aryan
2 жыл бұрын
first, you go to the VIEW tab and activate ORIGINS. From there on, you'll see the origin.
Modifying the component within the assembly model is an "invitation" to crash especially for large complex files. Just do it in a separate window.
@swapnilgulve8638
9 ай бұрын
Not at all It's Bottom up assembly aproach It is helpful to design press tool, plastic mold etc. Even I use this method to design fixture
hello aryan how are you ? i have a question for you out of topic why they are using coding on solidworks are there any easier or something method hope you can answer thanks
@with-Aryan
2 жыл бұрын
if you mean equations, then they are very handy in a variety of situations.
@kuraigasone
2 жыл бұрын
@@with-Aryan no not equations İ mean coding example Vba macro thing is this better then normal drawing ?
thank you
@with-Aryan
Жыл бұрын
You're welcome
How to create a sweep boss. In assembly. Because I had three different sub assemblies. Which combines make one assembly.. Now I have to create a sweep boss (with spline and circle at bottom of spline starting) in assembly, it should pass-through my three different parts. And I don't know how to do that.. So can guide me please?
@with-Aryan
2 жыл бұрын
That'd be tip No.2. Create a new component in the assemble (if you wish) and just take it from there. Treat it as a normal part.
@shubhampatidar5982
2 жыл бұрын
@@with-Aryan it's like I can't create spline (in 2d)which passes through my three areas of assembly and they are at on different planes..here I have to use 3d sketch for that I think?
@with-Aryan
2 жыл бұрын
@@shubhampatidar5982 not necessarily. You could create a 2D spline that does NOT go through all your component FIRST, then after your part is ready, MOVE IT, place it in a way that it DOES go through all your components, then FIX it there using MATES
@Ray-qo7jg
Жыл бұрын
@@with-Aryan how is this possible any tips pls
Thanks y
@with-Aryan
Жыл бұрын
Welcome
Brother , please do teach tools drawing area.
@with-Aryan
2 жыл бұрын
next video tonight is about that
TNX VEER
@with-Aryan
Жыл бұрын
you're welcome!
Maybe the turbine blade wasnt a flat surface thats why it was not mating.Due to slight curvature it may cause an error.
@with-Aryan
2 жыл бұрын
good catch, yes
I’d love your teaching method. However with all due respect I understand that speaking a different language comes with its downfalls if I may, let me say that your ability to speak English is hindered by your accent, that’s rendering your speech incomprehensibleIn certain areas. Please slow your speech down to 75% of what you normally do and pronounce your words more precisely. Thank you so much
@with-Aryan
2 жыл бұрын
thanks for your honest feedback, duly noted
@unknownbmx12345
2 жыл бұрын
I think you are the one that has trouble with comprehension... He talks slowly as it is already. I watch his videos at 1,5 - 2x speed and I can understand everything just fine