I’m passionate about helping the 4wd community and I'm developing an online course so i can help as many people as I can to get out there and wheel well on their 4wd adventures. To register your interest and for free and exclusive training videos visit madmatt4wd.com.au/register

I had another vision when you mentioned soft shackles... I'll go to confession in the AM.

@petebravo7180

3 жыл бұрын

🤣🤣

@MrHaydenJr

Жыл бұрын

Thirsty much?

@jonathonvince561

Жыл бұрын

Bro 😭😭😭😭

@xmo552

Жыл бұрын

Metal works better unless she's married and you don't want to leave marks.

@bondservantministriesinc.672

10 ай бұрын

Didn’t see that coming! 😂😂😂😂

Recently recovered bogged 4WD's and decided to search the subject when I arrived home. Always learning something new. Safety doesn't take a holiday. Awesome video.

Peace of mind in regards to recovery safety, eg no worry of cannon ball shackles is a wonderful thing. Surely the likes of TJM and ARB are considering soft shackle friendly recovery points incorporated into bull bars. Thanks for a great video. 👍

...WOW!!!! THAT'S REALLY INGENIUS!!! THANK YOU, FOR SHARING THESE HELPFUL IDEAS!!!

That was good information sir and to top it all off, your audio was FANTASTIC! Thank you!

@MadMatt4WD

7 ай бұрын

Glad you enjoyed it!

Thank you for the tips and techniques.

Thank you for sharing your experience and your tips with us. Best wishes from Pakistan

Great tips Matt!! Great teaching as always. Thanks for putting this out there..

@MadMatt4WD

3 жыл бұрын

Thanks mate!

@xmo552

Жыл бұрын

@@MadMatt4WD You mentioned energy needed. Have you got a video showing how to estimate how much strength is needed to perform a recovery? This way one could know if their equipment is rated to do the job safely.

@MadMatt4WD

Жыл бұрын

@@xmo552 hi. I don’t have a video specific to that and I asked a mate who would do a very good video on the subject and he only has one in the planning. There are formulas out there.

nice rundown with good info- thanks!

Thanks for sharing

Thanks for the video. Love watching your videos

Great Info

Thanks Matt I love the idea of low mass recovery gear and in 10 minutes you have bought me up to date.👍

@MadMatt4WD

11 ай бұрын

Glad to help

Another useful lesson

Thanks Matt! Enjoy your videos!

@MadMatt4WD

4 ай бұрын

My pleasure!

Thanks Matt, I appreciate the work you do. Good job.

@MadMatt4WD

3 ай бұрын

I appreciate that!

Really outstanding video. Thanks for the clear explanation! 👍

@MadMatt4WD

2 жыл бұрын

Glad to help

I haven't off roaded in 25 years and am about to get going again as I retire and these new rope winches and soft shackles are so nice and thank you for doing videos about using them as I was an old steel cable and chain guy and always carried very very heavy chain for safety and now we have this. I am excited about learning new tricks and gear.

@MadMatt4WD

Ай бұрын

You can do it!

Very useful for me in snowmobile recovery. Many Thanks!

@MadMatt4WD

2 жыл бұрын

That’s a different application to what I had in mind. Well done.

@robertcruickshank5617

2 жыл бұрын

Light weight, and strong. Anything metal tends to beat everything up on a snowmobile. Usually blows a hole through where ever it's being carried.

Greetings from Venezuela!!! Thanks for all the good advices!!!

@MadMatt4WD

2 жыл бұрын

My pleasure.

Great content as always Matt, keep it up👍

@MadMatt4WD

2 жыл бұрын

Thanks kindly

Excellent video and very helpful! Cheers from the USA!

@MadMatt4WD

Жыл бұрын

Glad it was helpful!

Another awesome vid Matt. Factor 55 have some great gear. Keep up the good work. 👏👏👏

@MadMatt4WD

3 жыл бұрын

Thanks and yes they sure do!

I also manufactured my own winch bar with recovery points for rated bow shackles, but when fabricating them I made sure each hole had a very smooth inside radius for just these reasons :) great video and thankyou for your content.

@MadMatt4WD

Жыл бұрын

I do similar.

@destnations5588

Жыл бұрын

@@MadMatt4WD I do have one question that bugs me from time to time, if you own an offroad vehicle, and no companies manufacture the parts you are after and need offroad, do you make your own stuff or is there some items you pay for someone professional custom build for you, like rock sliders and the like?

@MadMatt4WD

Жыл бұрын

@@destnations5588 hey mate. I make the vast majority of my own stuff. All the Bundera bar work including the flares are mine. Mainly because I had specific needs. The 105 came with its bar work and its ok for a tourer. I also modify things to suit like the racecar front bar. Totally moded from an arb bar. It has my own recovery points that tie back to the chassis.

@destnations5588

Жыл бұрын

@@MadMatt4WD Nicely Done, I'm going to have a crack at designing some suspension components soon as mine tend to act more like toilet paper than sheet pressed steel at times.

thank you for great video

@MadMatt4WD

3 жыл бұрын

Pleasure mate

Matt, another very informative video.

@MadMatt4WD

3 жыл бұрын

Thanks Tim

Great vid, best off all, I learnt something 👍

@MadMatt4WD

2 жыл бұрын

Good. I try to have a learning in each video

NIce information! In regards to the bridle and soft shackle during a kinetic recovery, its always preferential to use less rigging gear if possible. Its just less things or equipment that can fail. The strap or rope directly to the bridle is the way to go. Cheers

@MadMatt4WD

3 жыл бұрын

Great point!

@MR-hu1bx

Жыл бұрын

@@MadMatt4WD Hey mad matt, seems like your a bit upset in some of your videos about 4.2L Patrols mate, it’s that because they smoke every other 4x4 off road and you deep down really want one?

@MadMatt4WD

Жыл бұрын

@@MR-hu1bx oops you’ve caught me out. 😂😂😂😂

@MR-hu1bx

Жыл бұрын

@@MadMatt4WD Thought so mad matt, I actually drive a cruiser too believe it or not and my old GU would punish it off road that’s for sure.

@MadMatt4WD

Жыл бұрын

@@MR-hu1bx there’s nothing wrong with both platforms Offroad. Both go hard and have advantages and disadvantage.

Thanks great tips

@MadMatt4WD

2 жыл бұрын

Glad to help

Very informative buddy 👍👍👍👍

@MadMatt4WD

3 жыл бұрын

Thanks mate!

Thanks!

@MadMatt4WD

Жыл бұрын

Greatly appreciate the support

Grazie.

Keep up the good work Matt, good luck this weekend. Non Stick Nick

@MadMatt4WD

3 жыл бұрын

Thanks mate! I appreciate that

Some weight conscious hammock campers use small soft shackles on their hammocks instead of carabiners. I’ve never used them but know others that do.

I had a 1" mooring line I used for recoveries back in the 80's. Everybody always shared their opinion on how dangerous they thought they were. Seems to be the go to nowadays.

@ED-es2qv

Жыл бұрын

These ropes today aren’t made from the stuff they had in the 80s. Remember when plastics always cracked in the sun or cold? Car dashes were all cracked. We learned a lot about synthetic fibers since then. I can’t speak for mooring rope, but I can say I’ve seen a lot of rope break, and until there were recovery ropes, I saw very few successful recoveries with rope.

@siegehammer63

Жыл бұрын

​@@ED-es2qv my dad introduced me to naval seine rope very young, the good stuff was there it was just obscure and expensive. Now rope in general is more reliable

Lol correct me if I'm wrong but i reckon this is the first time you have got through a hole video without stalling the Bundy 😂 Na love ya work thanks for the tips, it's always good to hear how other blokes do the same job differently cause like ya said every situation calls for a slightly different set up.

@MadMatt4WD

3 жыл бұрын

Haha that made me laugh so hard. You state a genuine fact about the Bundy 🤔😊. And yes every recovery can be tackled differently and get good results. I really want to encourage people to understand the underlying principles to be able to then make decisions that suit their situation.

I have seen tests done on where to place the knot and yes it does matter. You are spot on to set it in the 90’ setup. The covered shackle is only dyneema in the shackle the sheath cover is not and you can not see the ware/damage underneath it when using it with a snatch ring/soft shackle pulley.

@MadMatt4WD

3 жыл бұрын

Cool

newest subscriber!! great meeting you at the cliff hanger event!

@MadMatt4WD

3 жыл бұрын

Thanks for the sub and yes it was a pleasure meeting with you. I look forward to working together.

Good stuff Matt, keep up the good work. Oh by the way nice presentation on the State v State show on tele

@MadMatt4WD

3 жыл бұрын

Much appreciated!

I will probably be making my own soft shackles.

@MadMatt4WD

2 жыл бұрын

Some do that.

As far as I understand (at least Factor 55) light duty soft shackles are quite enough for a normal vehicle. The heavy duty soft shackles are needed mainly for big trucks.

I have and love my Factor 55 soft shackles. However, when they are new, they tend to do what I call 'Gator Jaw' which means they cinch tight and are very difficult to undo. Could you do a video on ways to deal with this?

I agree about the knot placement, thanks for the video

@MadMatt4WD

2 жыл бұрын

My pleasure

Just want to pick up on one bit of advice you gave. The soft shackle has the outer sheath fitted to reduce wear from friction, yet if using your advised position (attaching right next to the knot) then there is no sheath, ultimately reducing the life of your shackle.

@bumfit5491

3 жыл бұрын

Softener was on the loop in tow strap but your right if rough or sharp rigging used your off the protector.

@MadMatt4WD

3 жыл бұрын

I'm thinking in regards to the rotating of the RRP.

Quality work!

@MadMatt4WD

3 жыл бұрын

Thank you! Cheers!

I would favor the manufacturing instructions for spectra/dyneema for the ring pulley as the key advantage is low friction and high strength - the soft shackle is rated at more than needed if you are shopping right and using feelings rather than science sounds religious. Have used this stuff for 30 years.

@rp4b449

2 жыл бұрын

Yes - stick to the manufacturers instructions. The alloy pulley/UHMWPE soft shackle combination only works because of the very low coefficient of friction between the two (and the tensile strength of the rope). UHMWPE has similar friction properties to Telfon. However, the weakness of UHMWPE, like polyethylene in general, is its very low operating temperature, max around 80C and melting point at some 120C. Like thermoplastics it will loose strength in-between. If you use a sleeve made of polyester (PETE) or Nylon, they have coefficients of friction or 2-4 times that of the rope. Under winching force (which could easily be 3-5t) they will generate heat and could weaken or melt the rope.

Thanks for the great video. Question: how should I think about choosing the right working load limit (WLL) for soft shackles used in a vehicle to vehicle recovery?

@MadMatt4WD

3 жыл бұрын

It’s actually very difficult and is one of the great issues we have with 4wd recovery gear. That being clear advise as to what gear we should be using. Even the way the gear is rated is ambiguous.

I would be interested to hear your opinions on the "freedom winch lines" that are being made by bleepinjeep, which basically have a soft shackle built into the end of the winch line, instead of having a spliced eye and hook/shackle mount on the end like a traditional winch line. I know Matt's Off Road Recovery uses them and loves them, but would like to hear your opinions on them, it was through MORR that I started watching your channel, after you did the discussions with him into the kinetic recovery ropes vs the kinetic recovery straps. Thankss for another great video, I always find your videos are educational and full of good information, and I enjoy watching them.

@MadMatt4WD

2 жыл бұрын

Hey thanks for the kind words and questions. I think the idea is fine enough and works. Probably my one concern is will people replace the soft shackle end once it gets a bit old or used shall we say? Aside from that if it works for your situation go for it.

Would like to see more front recovery points and bullbars with soft shackle friendly mounting points so you don't have to use any steel shackles at all.

@MadMatt4WD

3 жыл бұрын

Yes that would be good.

@lewy1

2 жыл бұрын

The only place I would use a soft shackle is to join straps

If you don't have recovery points, you can use a larger soft shackle around a chassis member. 2 will work in the bridal configuration with the tree protector.

@MadMatt4WD

4 ай бұрын

So long as the chassis is accessible this is correct. Unfortunately it’s often difficult to get to a suitable part of the chassis on a modern vehicle.

@nickgood8166

4 ай бұрын

@@MadMatt4WD Yup, this works on my HiLux Vigo D4D. It's important to spend time figuring this stuff out and rehersing it with the kit and your vehicle. Including getting a jack under the axle with a flat tyre. The flat causes the axle to dip and your bottle jack won't fit under it. A Hi-Lift with a Jack-mate to jack from the wheel directly, combined with an axle stand, sorts that one. Also, jacking the wheel directly means you don't have to jack through the suspension travel, which is easier and safer. Better yet, you don't need Hi-Lift jacking points. I don't want a bull bar or a massive steel rear bumper, to keep weight down - these combined confer well over 100kg weight penalty. For my usage profile in Southern Africa, not driving at night I'll take that. So I don't get the recovery and Hi-Lift jacking points that come with these and have to make another plan.

I no longer have any metal at all on my winch. I have removed the hook from my winch line and spliced a loop into it and then use soft shackles. It’s so much safer.

@MadMatt4WD

2 жыл бұрын

That’s a fantastic solution

@officialWWM

2 жыл бұрын

@@MadMatt4WD thanks :)

Hey Matt, great video and awesome information. Something I'm trying to find out with wanting to swap over to soft shackles in my kit is - when do I need to worry about minimum bend radius? For instance, can I use the thimble on the end of my winch line to attach a soft shackle? Thanks!

@MadMatt4WD

2 жыл бұрын

It all depends on the shackle. Ask the company your buying from for the spec. I recommend Factor55

Just amazes me that soft shackles are now the thing and yet the manufacturers of recovery points STILL manufacture with sharp edges! I asked one of the BIG off-road names and they said ‘she’ll be right mate’ 😏 So off with both and take to a metal fabricator to round the edges and re powder coat.

@MadMatt4WD

Жыл бұрын

Wow. You they need to be used correctly. Unfortunately your rated points will no longer be rated but I agree with your process.

@tonyf7997

Жыл бұрын

@@MadMatt4WD - agree but speaking to the fabricators the way they do softens and rounds the edge and does not make the inner dimensions smaller .. but understand your comment. Also will always try to use both with bridle to spread the load if in that situation..

@tjellis1479

Жыл бұрын

sharp edges promote the removal of the steel hardware...round the edges for soft...ok fine....but now install steel bolt in it's place...it can now bend/bow/ said bolt. The bolt/hardware is forever deformed. Keep it straight/sharp...IMO

In the USA we put tow hitch rigs front and back.

@MadMatt4WD

Жыл бұрын

We have recovery points front and rear as a general rule.

👍👍

The way that you show at the knot is the safest way, but I think that it will wear there much faster.

@MadMatt4WD

3 жыл бұрын

I've not seen them wear there as yet.

Seems like with a die grinder you could create that nice radius, since you were already fabricating that recovery point.

@MadMatt4WD

3 жыл бұрын

Yes I probably could do that but the way I use my gear I usually single line winch and rarely use these points so fitting a shackle every so often hasn't been an issue. I don't use the soft shackle in that situation.

i would think that with the bridal i would thread the bridle thru the rope eye eliminating one break point

Hey Matt! Where you using the factor 55 tow strap, or their tree saver on that last recovery to join your two recovery points? Was just curious since they seem pretty similar just from a quick glance at the website

@MadMatt4WD

Жыл бұрын

Tree saver.

I have to disagree...I suggestion for any homemade mounts, use a file and make them suitable for synthetic rope, and IF you're using a thimble shackle and bridle, use a rope bridle through the middle and synthetic winch line in the channel....The point in any rigging is to limit the number of dynamic connections...I would never, never (never say never ;-) )use a bridle with a soft shackle or D ring to attach to the 'pull' line, always run the bridle through the 'eye' of the pull line...

@MadMatt4WD

Жыл бұрын

I thought I covered that verbally in the video but yes I agree with you.

Soft shackle plus bow shackle, you might as well use bow shackles. Just put better roundover on your recovery points.

Hi! Love your channel! Here is a video test performed by Factor 55 testing a soft shackle in various knot positions. It doesn't matter as the shackles fail within 2 percent of each other. Secondly, the failure point was the same, the loop broke, and it did not slip off the knot. I hope you find this helpful! kzread.info/dash/bejne/hKB1j9N8pZypZNI.html

The frictional loss from the soft shackles are actually resonable. Lock your hubs 4wd did a test with a load cell that might be worth checking out.

@stephenh7965

3 жыл бұрын

Check out the one by Robert Pepper I think it's a better video and it doesn't see the problems Lock your hubs did.

@MadMatt4WD

3 жыл бұрын

Yeah Simon got some key information wrong in that video from what I saw.

With the lighter soft shackle could you double them up ie use 2 as the rope retention pully's shackle to the bridle?

@MadMatt4WD

3 жыл бұрын

I think so

Matt, I like the way you described setting the soft shackle with the knot positioned near the tree protector but I’d like to see some actual testing to see whether it makes any difference. Perhaps chat with Robert Pepper and do some scientific tests to see if it makes any difference. Then you can say authoritatively that we should do X. Richard

@MadMatt4WD

8 ай бұрын

Hi Richard. This video was done some time back and was based on antidotal evidence. I think now days the general consensus is it doesn’t matter.

If one pours a little water on soft shackle holding pulley it lets it spin easier with less friction.

@MadMatt4WD

3 жыл бұрын

Ive not tested that but I’ve not seen friction as a problem

@Michael-lx7px

3 жыл бұрын

@@MadMatt4WD I've not tried it either but did see it done, also thought that WD-40 would help as well. Keep the rubber side down!

9:37 "I've spoken to Factor 55 about that and 🤷🏽‍♂" *Translated*: "They disagreed with me but I am too full of myself to believe the manufacturer. "

WHAT USING NON RATED recovery points, agree with using the heaver rated shackle on the snatch ring(block)

@MadMatt4WD

Жыл бұрын

I know right imagine not having rated recovery points fitted to a non rated chassis.

@user-nk4gm7bi2v

Жыл бұрын

@@MadMatt4WD LOL Matt. Jeff

What's the min radius? Since some have no more the my ARB ones for my 200 that are not rated for soft shackles. The example of the radius is what I'm talking about some have huge and some like that have no more then non soft shakel ones...

@MadMatt4WD

Жыл бұрын

Generally work on a 1.5-2 times the diameter of the rope for the bend radius.

There's a theory in rock climbing when connecting soft to soft that they should be of similar diameters to minimize "sawing" during loading. Is that something you don't have to worry about when using soft shackles such at in a setup like you demonstrated?

@MadMatt4WD

Жыл бұрын

It certainly is a consideration but generally our pulls don’t involve any redirection like you would see. Having said that our loads can be considerably higher and as such if they do slide on each other they get burn real fast. The other consideration for us is what happens in a failure? Generally very little of concern assuming no metal is in the rig. Where as for you guys I imagine you don’t fly real well if the rope breaks.

Ship Matt ship! Lol.

@MadMatt4WD

3 жыл бұрын

Lol.

Could you remove the sleeve on the heavier load rated soft shackle and get the best of both load and less friction?

@MadMatt4WD

7 ай бұрын

You could but that could have an effect on its rating. Personally I’ve not seen it be a real issue.

@michaelweymouth4015

7 ай бұрын

@@MadMatt4WD thank you, good to know.

Note that the coating on the heavy duty shackle will actually keep the factor 55 pulley from spinning. In your case, it will still work but the pulley won’t spin. It will just stay motionless and the rope will slide around the pulley, causing the rope fibers to get shiny and slick as they slide around the pulley. The standard shackle will allow the pulley to spin.

@MadMatt4WD

Жыл бұрын

Yes the std shackle is designed specifically for the rrp.

@243WW

Жыл бұрын

The load put on the rrp from a winch will only be as mush as the recovered vehicle including rigging factors, angle, suction etc. The standard soft is more than capable.

I have found that there is significant friction associated with using my Maxtrax winch ring with their soft shackle that has a sock. So much friction when loaded up that the ring stalls and ceases to rotate. I approached Maxtrax and their advice is to ensure the ring makes direct contact with the rope, not the sock. Also add some water to the rig to reduce friction even further. Manufacturers instructions…

@MadMatt4WD

2 жыл бұрын

Interesting. I use the factor 55 ones and don’t find there to be excessive friction. To my thinking it also doesn’t matter which but rotates although you would expect the larger diameter to stay with the rope so it rotates in a traditional manner.

@cameronwood1994

2 жыл бұрын

7P Tactical say that the knot should be supported by the recovery ring, as shown here kzread.info/dash/bejne/qaJlo7yJfrOvhKQ.html, so it appears that the manufacturers of this equipment cannot make up their minds as to where the knot should be located.

So is it safe to put that energy on a tree saver fast? Like yanking it with a kinetic rope?

@MadMatt4WD

2 жыл бұрын

It would take the hit but I’m not sure when you would do that.

is there a way to use that bridle AND use the winch to a hard shackle that also has one of the bridels hooked to it? OR is it better to skip the bridle and just do a double pull as usual

@MadMatt4WD

15 күн бұрын

I’m not quite following the idea?

@vicc6744

15 күн бұрын

@@MadMatt4WD I was just thinking out the box as using one point for 2 different things but now that I re-read it- it doesn't even make sense for me- In 55 years of off roading I only used my winch once- LOL- and I really didn't need to-I was just showing off and it was a straight pull lol. I think as I get older I just get crazy thoughts- Thanks for the reply

Great clip Matt, question though - at the start you’re showing how you’re using a soft shackle between the metal D shackle and your recovery strap … why wouldn’t you simply leave the soft shackle out of the equation and just hook that big sturdy metal D shackle straight onto your recovery strap - cut out the soft shackle ‘middle man’ so to speak ? Cheers mate 👍🇦🇺

@MadMatt4WD

Жыл бұрын

You certainly can I think it was just a case of demonstrating the soft shackle. Without going back and watching the video I don’t recall everything I said but I thought I explained it.

@4WheelingInNSW

Жыл бұрын

@@MadMatt4WD all good mate - was just curious. Keep up the good work 👍🇦🇺

could use a block and tackle system too...

@MadMatt4WD

Жыл бұрын

You could. I’ve thought of doing a video showing that one day.

At 8:45, you start explaining that the manufacturer recommends using the light duty soft shackle on the rope pulley and that you disagree. There's more to it than just load capacity. The added frictional resistance you mention on the sheathed heavy duty shackle also causes undue wear on the shackle. If you use it this way several times, you could potentially reduce the load capacity of the shackle to less than the specified load capacity. That's when things get really dangerous.

@MadMatt4WD

2 жыл бұрын

I hear that but it’s better to have to condemn a device than intentionally use a device that is underrated.

@---cr8nw

2 жыл бұрын

@@MadMatt4WD, I agree 100% that you shouldn't use a shackle that isn't rated for the load. But I didn't think that's what the manufacturer was advising.

@MadMatt4WD

2 жыл бұрын

No but as I explain in the video a double line pull will nearly always but a high load assuming a significant recovery load.

Why use an extra device (Soft Shackle) when you have to use a bow shackle Just use the strap directly One less thing to go wrong. People over using these th8ngs

@MadMatt4WD

3 жыл бұрын

I was simply trying to demonstrate a point. Yes I would normally connect directly to the bow shackle with my strap on this vehicle.

Do you have links for the shackles you used in your video ?

@MadMatt4WD

Жыл бұрын

Head to my gear store on my website. MadMatt 4wd

what is the high rate in soft shackles for like big king 4x4 6ton truck?

@MadMatt4WD

3 жыл бұрын

Mate I’d have to look it up but you want a safety margin.

I think I have to disagree with you on that last bit when using the double line winch. I believe (opinion) I would go with the lighter duty soft shackle as recommended by the manufacturer. As you pointed out, the heavy duty shackle has a coating on it that introduces added friction. While this wouldn't likely affect the winch or overall pull it would introduce heat to the shackle. This heat will speed the degradation of the shackle. Maybe not by much one time but if you get into the habit the shackle will have a higher degree of failure....at the worst possible time. Please kick this around in your head and maybe think of a way to experiment and show this yank that he's wrong. Would be a good video!!

@MadMatt4WD

3 жыл бұрын

Hey Brian you do make an excellent point and when we use synthetic products heat is certainly a consideration. I have given this some thought and my thinking is this. One, the rope speed is very slow with a standard low mount winch. Two, because the heat is generated onto the outer wrap we don't damage the weight bearing fibres in the centre if the heat does rise to a level of concern. In my experience thus far I'm not seeing any heat generation of consequence in the centre of the RRP. I can touch the RRP and can't feel any heat.

@briancolumbo9136

2 жыл бұрын

@@MadMatt4WD It would be a great way to spend an afternoon just trying to find where the breaking points are

@mitchalvin

Жыл бұрын

Most synthetic rope soft shackle pulleys are now offset to keep the wheel from spinning to keep from wearing through the shackle.

But wouldn't the force applied to the soft shackle be better as linear as possible, think of a tow rope on a ski boat the elastic force is applied along the rope not parallel to it? Although I'm a rock climber and a dynamic rope is often set up over an anchor point so it's a 180degree bend.

@MadMatt4WD

2 жыл бұрын

I’m not quite sure what you’re getting at. Sorry.

@fsmith7648

2 жыл бұрын

@@MadMatt4WD You show using the soft shackle that you think it's better to have the knot at the strap loop end which is shown at 2:50 but that means the rope is at 90 degrees to the strap which stresses the rope in a sideways direction it's not designed to be stressed in. When you have the soft shackle with the knot at the recovery point end 2:45 you can see that both sides of the rope through the knot are more in a straight line along the rope where it is designed to be stressed. Think of a ski tow rope on a boat, the skier is stressing the rope along the length of the rope where it is designed to stretch, it's not perpendicular to the rope where there is no stretch. BTW Here's a really good vid I came across on considerations of soft vs steel shackle, makes a good point just to use steel with a very good damper system in case of failure. kzread.info/dash/bejne/eKxnt6Zvj5a1o9Y.html

Hi Mattt I have a 4m 75mm 12 tonne bridle strap what size soft shackles should I use please

@MadMatt4WD

2 жыл бұрын

That’s the wrong question. You should ask if I’m recovering x amount of load what size do I need. The size is dependant on what you are trying to do. I hope that makes sense.

@grahamnichols9595

2 жыл бұрын

@@MadMatt4WD thanks Matt ! That makes sense !

What rating are the shackles do you recommend for D shackles

@MadMatt4WD

Жыл бұрын

For now shackles I always try to use 4.75t which have a 5 times safety so massively strong for our application.

after a tow isnt it hard to reopen the hole to remove knot?

@MadMatt4WD

Жыл бұрын

Only when there new.

Hey Matt, I have heard of the „knot position doesn‘t matter“ theorem as well. As an engineer by heart, I‘d say your assumption is right, the load is better directed with the knot at mentioned position close to the eye of the strap. It might not be of relevance during most uses, but when load is on the edge and a chain of connections is on its maximum capacity, it very well might. Apart from that, many great advices for sure, good video. Thanks.

@MadMatt4WD

Жыл бұрын

Thanks for the perspective.

Brand new to soft shackles but isn't the use of the bow shackle making the soft shackle redundant ?

@MadMatt4WD

11 ай бұрын

As I say in the video I only do it on this vehicle because of the sharp edges and for demonstration purposes.

If you need a rat tail file just ask! With a grinder a good pipefitter could make that hole smooth as a babies , oh you know

@MadMatt4WD

3 жыл бұрын

Thats true.

Ohshit shackle :)

Matt, what's the point of using a bow shackle and a soft shackle, doesn't one make the other obsolete?

@MadMatt4WD

2 жыл бұрын

It does. This was more for demonstrating principles.

What do you mean the winch recovery will introduce double the load? How does it double the load on the soft shackle? The load in each winch line is half so if you rig is 5000 lb the soft shackle sees all 5000 lb and your buddies winch sees 2500 per leg. Am I just misunderstanding what you meant?

@MadMatt4WD

2 жыл бұрын

Probably a wording issue. The recovery load is what it is. Reading your comment you understand the principle correctly.

3.34 - shouldn't the knot be underneath, on the other side of the loop of the strap so the pull is against the knot half of the shackle not the loop half? In theory, the forces shown here are still trying to pull the loop over the top of the knot.

@MadMatt4WD

Жыл бұрын

Since filming this I’ve come to the conclusion it doesn’t really matter.

@BorehamMedia

Жыл бұрын

@@MadMatt4WD Haha. Evolution in action :-)

I’m wondering about using a soft shackle with a bow shackle, as you’ve shown, when the soft shackle is rated for a higher minimum breaking strength than the bow shackle. Isn’t that problematic if the bow shackle fails? Are you not concerned with this since you’re likely working at a much lower load? This seems to be something that people on KZread don’t really mention. (This was what I hoped you might adress in this video.)

@MadMatt4WD

5 ай бұрын

Good question. The issue you’re coming up against is how the items are rated and what standard they meet. Most rated bow shackles have a WLL then a safety factor of five. But a soft shackle most likely has a MBS which says it’ll break it this load. As I said in this video the bow shackle was only used to demonstrate how to connect because my recovery points are too sharp for a soft shackle.

Do these go through that tiny hole available for car recovery?

@MadMatt4WD

2 жыл бұрын

If your referring to the vehicle tie down point they won’t and that point is not for vehicle recovery. They will go through most recovery points that are designed for a soft shackle by having a radius on the hole.

@jamesmiddleton5304

2 жыл бұрын

@@MadMatt4WD I was referring to the small little recovery holes or bracket that some smaller vehicles have. I go to the beach and help out stuck cars a lot. Some need a small shackle to recover them.

what are those lights ULTRA

@MadMatt4WD

5 ай бұрын

Yes ultra vision lighting. They’re excellent.

No hats in your store? When are they coming back?

@MadMatt4WD

3 жыл бұрын

We should look into that! 👍

At 3:00 in. Why not just attach the recovery strap to tye D ring shackle? No need for the soft shackle.

@MadMatt4WD

5 ай бұрын

As I say in the video my points are too sharp for a soft shackle so I was just trying to demonstrate the setup