Sodick Injection Molding Machines use two stage plunger injection molding system for Exact Dosing capability.
Жүктеу.....
Пікірлер: 38
@neerajraheja85713 жыл бұрын
I am Neeraj Raheja from Total Tech Engineering. It is a great to see this innovative technology. For sure, You can do amazing business in India. Wish you all the best.
@phuocbolip10 жыл бұрын
this is the best plastic injection technology today.
@mertgulcurgs Жыл бұрын
May I ask what is the minimum deliverable shot size is?
@normanpowell68313 жыл бұрын
I worked in this field for several years. Only a cracked "check ring" will allow material to back-flow around the screw.
@SodickPlustech
3 жыл бұрын
Hi Norman, thank you for your comment. The material backflow happened at the check ring is recognized by many injection molding machine makers. I think it is fair to say the managing the backflow amount and consistency is the technology of the conventional reciprocating screw system. kzread.info/dash/bejne/e6aDuNSefcrYndI.html This is one of example of controlling its backflow.
@100Hasake Жыл бұрын
Can this be used to create colour grading in a product?
@secondintelligentequip.35744 жыл бұрын
Nice。
@JoshuaFernandesArt7 жыл бұрын
will this technique be able to process 4 kg of ldpe plastic ?
@CIPETTECHinHINDI5 жыл бұрын
Goood
@MotorsportsX7 жыл бұрын
did i hear correctly that the same machine that will do plastic, will do magnesium?
@SodickPlustech
7 жыл бұрын
Hi Motorsports X, our magnesium machine, MG series are very different system from our plastic injection machines. You need MG machine for magnesium molding. Thanks.
@Rajakumar-fq1bd
5 жыл бұрын
Vikash Kumar 9507122099
@inquisitive9804 жыл бұрын
Way back when technology was changing from plunger to screw machines, many plunger machines were retrofitted in this very method. Nothing new or revolutionary.
@WurstPeterl
3 жыл бұрын
Ken Lemanski Do you know how they close the extruded? Do they really just push the screw forward so it seals the opening?
@user-dc5lr9hh2y5 жыл бұрын
У меня есть советская литература по литью пластика и там описание и чертежи точно такие и самое интересное эти станки были ещё в 30х годах как экспериментальные но хмельницкие проще
@southtonorth-original4 жыл бұрын
What about sensitive materials? Like acetal, poly carbonate, TPU?
@SodickPlustech
4 жыл бұрын
The machine is made for high performance materials such as PEEK, PSSU, LCP, etc. Yes, this machine is good for Acetal, PC, and TPU.
@southtonorth-original
4 жыл бұрын
@@SodickPlustech Thank you....
@southtonorth-original
4 жыл бұрын
@@SodickPlustech Do you have any branch/ dealer/ joint venture in India?
okay but what stops the plastic going inside the mold when filling the injection chamber ?
@southtonorth-original
4 жыл бұрын
May be a spring loaded shut off Nozzle..
@nestormenendez39102 жыл бұрын
Vídeos en español
4 жыл бұрын
My job
@bouraschabaneyoucef59147 жыл бұрын
how is the consomation of electrique is tow mor than a clasique machine a loock that there are tow resitanse in this machine and the laste control systeme it s good machine and thre is a big probleme withe the carte control systeme that wate see
@darkshadowsx5949
4 жыл бұрын
slow down there chief and use spell checker.... its like you put your words in a blender. About half of them are spelled incorrectly. hopefully you're doing better at English 2 years later.
@rushithakker44162 жыл бұрын
Do your company makes only Plunger based Injection machine.
@SodickPlustech
2 жыл бұрын
Yes. Thank you for asking.
@khanhdam53136 жыл бұрын
Báo giá cho mình nhé
@PackLocusMachineries3 жыл бұрын
this is slow what is for high speed
@SodickPlustech
3 жыл бұрын
Sodick high speed injection can achieve up to 1500mm/sec. Please, check it out the link for more info. www.plustech-inc.com/products/high-speed-pressure/
Пікірлер: 38
I am Neeraj Raheja from Total Tech Engineering. It is a great to see this innovative technology. For sure, You can do amazing business in India. Wish you all the best.
this is the best plastic injection technology today.
May I ask what is the minimum deliverable shot size is?
I worked in this field for several years. Only a cracked "check ring" will allow material to back-flow around the screw.
@SodickPlustech
3 жыл бұрын
Hi Norman, thank you for your comment. The material backflow happened at the check ring is recognized by many injection molding machine makers. I think it is fair to say the managing the backflow amount and consistency is the technology of the conventional reciprocating screw system. kzread.info/dash/bejne/e6aDuNSefcrYndI.html This is one of example of controlling its backflow.
Can this be used to create colour grading in a product?
Nice。
will this technique be able to process 4 kg of ldpe plastic ?
Goood
did i hear correctly that the same machine that will do plastic, will do magnesium?
@SodickPlustech
7 жыл бұрын
Hi Motorsports X, our magnesium machine, MG series are very different system from our plastic injection machines. You need MG machine for magnesium molding. Thanks.
@Rajakumar-fq1bd
5 жыл бұрын
Vikash Kumar 9507122099
Way back when technology was changing from plunger to screw machines, many plunger machines were retrofitted in this very method. Nothing new or revolutionary.
@WurstPeterl
3 жыл бұрын
Ken Lemanski Do you know how they close the extruded? Do they really just push the screw forward so it seals the opening?
У меня есть советская литература по литью пластика и там описание и чертежи точно такие и самое интересное эти станки были ещё в 30х годах как экспериментальные но хмельницкие проще
What about sensitive materials? Like acetal, poly carbonate, TPU?
@SodickPlustech
4 жыл бұрын
The machine is made for high performance materials such as PEEK, PSSU, LCP, etc. Yes, this machine is good for Acetal, PC, and TPU.
@southtonorth-original
4 жыл бұрын
@@SodickPlustech Thank you....
@southtonorth-original
4 жыл бұрын
@@SodickPlustech Do you have any branch/ dealer/ joint venture in India?
@SodickPlustech
4 жыл бұрын
@@southtonorth-original www.sodick.co.jp/company/overseas.html#sectionC
@southtonorth-original
4 жыл бұрын
@@SodickPlustech Thank you...
I think i just injection molded in my pants
@jorritwoudsma7530
4 жыл бұрын
lol
okay but what stops the plastic going inside the mold when filling the injection chamber ?
@southtonorth-original
4 жыл бұрын
May be a spring loaded shut off Nozzle..
Vídeos en español
My job
how is the consomation of electrique is tow mor than a clasique machine a loock that there are tow resitanse in this machine and the laste control systeme it s good machine and thre is a big probleme withe the carte control systeme that wate see
@darkshadowsx5949
4 жыл бұрын
slow down there chief and use spell checker.... its like you put your words in a blender. About half of them are spelled incorrectly. hopefully you're doing better at English 2 years later.
Do your company makes only Plunger based Injection machine.
@SodickPlustech
2 жыл бұрын
Yes. Thank you for asking.
Báo giá cho mình nhé
this is slow what is for high speed
@SodickPlustech
3 жыл бұрын
Sodick high speed injection can achieve up to 1500mm/sec. Please, check it out the link for more info. www.plustech-inc.com/products/high-speed-pressure/