Looking at replacing screw posts and window post and other parts that hold the roof up on your slotcars
Жүктеу.....
Пікірлер: 28
@christopherbusch19332 жыл бұрын
Your video inspired me to repair a badly damaged tjet body and now looks a lot better!
@Kim-st3xg5 ай бұрын
Great video Troy, ironically I just replaced both front pillars of a matador body with your help. Now in process of painting the body. It’s early version of matador and doing the mark donahue paint job. Where paint lines are horizontal. Thanks for tutorials!!!
@rogerperezl66103 жыл бұрын
Thank you so much for your patience and expertise. If you want to speed the super glue cure, just add some baking soda to the jointure.
@manickreations7 жыл бұрын
love to see changing stuff into slot cars :)
@newjerseydiesel8962 Жыл бұрын
Love the channel boss! Hopefully i can retain some knowledge at some point. You ever do anything with the tyco TCR cars?
@vitoman507 жыл бұрын
Thanks troy fixed a couple of my cars this way after i saw this video.....
@daveheadrick14107 жыл бұрын
Adding in some shows on diecast cars and doing some crossover shows with diecast slot car conversions sounds good to me.
@ki4dmh6 жыл бұрын
Would love to see some diecast conversions!
@dantop12807 жыл бұрын
Go with some die-cast eventually you will run out of topics with just HO slot cars. Unless you start with 1/32nd scale like Carrera etc. I'm a model builder for over 30 years and I can see your frustration with tools. I suggest you visit a model shop or online at www.micromark.com. Great source for work you are doing in restoration and any type of modelling!! Keep up the great show!!!
@scooterdoughmas3012
3 жыл бұрын
You can get 124. Chassis that any model body will fit can upgrade motors etc but thee rates she does go uphaha yea real satisfied surry lost the bookmark will find luv scooter d slot racing foever
@tracyscotdatemasch27737 жыл бұрын
Also when attaching a screw post use liquid Testors cement, Then reinforce it with Pieces of the body plastic mixed in with the liquid Testors and you won't have it break off when your done
@robertcrittenden4974 жыл бұрын
The bad thing about diecast conversion is the width is usually to narrow. Or lengths is long. I been trying to find the vids about shortening and widening. This guy had it down. You can shrink the mold. But takes learning by trial and error Another is molding silicone and resin. You can
@scooterdoughmas30123 жыл бұрын
thanks dou sweet thanks for sharing
@tracyscotdatemasch27737 жыл бұрын
Instead of using a hack saw or the dremel for cutting down the screw posts , you could use Micro saw blades made to fit x-axt knives. Available from Micro mark
@georgemendezjr92637 жыл бұрын
that would be great troy
@ThomasWENDLAND-kv3us Жыл бұрын
Have you ever fixed a crack on the outside of the body on a t-jet?
@MikeRemvidas7 жыл бұрын
I've tried making a NASCAR HO die cast and it didn't turn out so pretty 🤔 Would love to see a how to vid on making one 🏁
@travismax3360
3 жыл бұрын
A trick : watch movies at flixzone. Been using it for watching all kinds of movies during the lockdown.
@theodorecash707
3 жыл бұрын
@Travis Max yea, I have been watching on Flixzone for since december myself =)
@kieranthomas6489
3 жыл бұрын
@Travis Max Yea, I've been using Flixzone for since november myself :)
@scooterdoughmas30123 жыл бұрын
sweet lovin it dou scooter d wow cool ifin i say so myself
@rodentcafeteria7 жыл бұрын
This is off topic, but I was wondering if you could do a review (if you haven't done so already) of the new Auto World IndyCar slot cars?
@slotcarcrazy
7 жыл бұрын
+rodentcafeteria yes I did a review of super 3 auto world Indy car it no the one year anniversary episode just scroll down and u will find it
@deankaczorowski4165 жыл бұрын
I have diecast car collection,I never can get a metal body to match up to a slot car wouldn't that ruin your track?I've managed to make 2 hot wheels plastic body's work.
@georgemendezjr92637 жыл бұрын
high troy,where can i get 1964 chevy impala cars and bodies
@slotcarcrazy
7 жыл бұрын
+GEORGE MENDEZ JR hay George sorry I did nor get back to you right away had to go to Seattle yesterday for a doctor appointment for my. I don't know any one that makes one but if you get in contact with Phillip A Laurio he's a member of slotcar crazy group on Facebook he may know so one or he may be able to make on for you
@georgemendezjr9263
7 жыл бұрын
thanks alot troy for your input
@scooterdoughmas30123 жыл бұрын
run that saw a cross a brick to fit common fixt theiyre cheap wear your eye protection haha
Пікірлер: 28
Your video inspired me to repair a badly damaged tjet body and now looks a lot better!
Great video Troy, ironically I just replaced both front pillars of a matador body with your help. Now in process of painting the body. It’s early version of matador and doing the mark donahue paint job. Where paint lines are horizontal. Thanks for tutorials!!!
Thank you so much for your patience and expertise. If you want to speed the super glue cure, just add some baking soda to the jointure.
love to see changing stuff into slot cars :)
Love the channel boss! Hopefully i can retain some knowledge at some point. You ever do anything with the tyco TCR cars?
Thanks troy fixed a couple of my cars this way after i saw this video.....
Adding in some shows on diecast cars and doing some crossover shows with diecast slot car conversions sounds good to me.
Would love to see some diecast conversions!
Go with some die-cast eventually you will run out of topics with just HO slot cars. Unless you start with 1/32nd scale like Carrera etc. I'm a model builder for over 30 years and I can see your frustration with tools. I suggest you visit a model shop or online at www.micromark.com. Great source for work you are doing in restoration and any type of modelling!! Keep up the great show!!!
@scooterdoughmas3012
3 жыл бұрын
You can get 124. Chassis that any model body will fit can upgrade motors etc but thee rates she does go uphaha yea real satisfied surry lost the bookmark will find luv scooter d slot racing foever
Also when attaching a screw post use liquid Testors cement, Then reinforce it with Pieces of the body plastic mixed in with the liquid Testors and you won't have it break off when your done
The bad thing about diecast conversion is the width is usually to narrow. Or lengths is long. I been trying to find the vids about shortening and widening. This guy had it down. You can shrink the mold. But takes learning by trial and error Another is molding silicone and resin. You can
thanks dou sweet thanks for sharing
Instead of using a hack saw or the dremel for cutting down the screw posts , you could use Micro saw blades made to fit x-axt knives. Available from Micro mark
that would be great troy
Have you ever fixed a crack on the outside of the body on a t-jet?
I've tried making a NASCAR HO die cast and it didn't turn out so pretty 🤔 Would love to see a how to vid on making one 🏁
@travismax3360
3 жыл бұрын
A trick : watch movies at flixzone. Been using it for watching all kinds of movies during the lockdown.
@theodorecash707
3 жыл бұрын
@Travis Max yea, I have been watching on Flixzone for since december myself =)
@kieranthomas6489
3 жыл бұрын
@Travis Max Yea, I've been using Flixzone for since november myself :)
sweet lovin it dou scooter d wow cool ifin i say so myself
This is off topic, but I was wondering if you could do a review (if you haven't done so already) of the new Auto World IndyCar slot cars?
@slotcarcrazy
7 жыл бұрын
+rodentcafeteria yes I did a review of super 3 auto world Indy car it no the one year anniversary episode just scroll down and u will find it
I have diecast car collection,I never can get a metal body to match up to a slot car wouldn't that ruin your track?I've managed to make 2 hot wheels plastic body's work.
high troy,where can i get 1964 chevy impala cars and bodies
@slotcarcrazy
7 жыл бұрын
+GEORGE MENDEZ JR hay George sorry I did nor get back to you right away had to go to Seattle yesterday for a doctor appointment for my. I don't know any one that makes one but if you get in contact with Phillip A Laurio he's a member of slotcar crazy group on Facebook he may know so one or he may be able to make on for you
@georgemendezjr9263
7 жыл бұрын
thanks alot troy for your input
run that saw a cross a brick to fit common fixt theiyre cheap wear your eye protection haha