Try dropping the whisker biscuit down a little so the arrows more level with the for wood and it'll probably not kick up as much. Great job though, very enjoyable. Seeya Rob

@hudsonhertz

11 ай бұрын

Yep, I think that should help with the arrow flight, thanks!

@PlatonicVoyeur

Ай бұрын

@@hudsonhertz it's weird because this is backwards from what you'd normally do for a bow - nock high usually means your rest needs to go up, but I agree it looks like it needs to come down. It would be interesting to paper tune it with bare shaft arrows.

I'm concerned that those 2 screws might give. That's a lot of energy stored and pulling on those and if they give while your behind it your gonna have a bad time. Especially if you add more bands.I'd consider bolts set backwards with nuts on the outside. Router or chisel just enough out of the end to set the bolts.. maybe even drill out the endpiece to suport slightly thicker bolts. Or use thick dowel rods that extend the stock to add suport to the end plate and in the end suport the upper part of that endpiese.. so not all the torque is on the screws

Nice concept there. I think that is you put the arrow rest like 10cm away from the rubberband stopper... arrow should fly more in a straigh line ( think of arrow rest on a bow... the bow line dont touch the arrow rest on the shoot... ) i dont know if i made my point clear 🤣

Nice work buddy

Nice slingshot rifle😊

Very nice video!!! Here in Greece we make bands of the thing which is inside bike tires. It works really well I would recommend you try it!

@KarlosEPM

5 ай бұрын

Hey! We did that too when I was a kid (ages ago). Those are called "butyl inner tubes". And back then, car tyres also had them!! And that elastic was very powerful. Cheers!

@kostasss.251.

5 ай бұрын

@@KarlosEPM yeah mate, fun stuff!!

Really cool and awsome thanks for your inspiration

Excellent

Nice toy 👍

I think pretty cool, I also think yoir arrows would fly better if the string didn't follow the arrow though the whisker biscuit.

Wow..nice and creative my friend 👍

kapo genio saludo de chaco argentina

Que largo mide el rifle que usas aqui para usar con flechas

Thanks so much good and simple idea ❤ KSA

Very nice 👍

Nice video 👍

Like video 📹 -keep them coming

Sensacional arma, muy bien diseñada. CONGRATULATIONS, pero seria maravilloso que subieras un TUTORIAL MUY DETALLADO de como se construye, especialmente la parte metalica. Saludos cordiales desde San Francisco de Campeche, en el sureste de la zRepublica Mexicana.

can i ask you to hunt and cook some more? sorry if my words are a bit messy because I use translate

Wow great project but I hope you did not burn your fingers ...

DUDE; I would suggest you wear some SAFETY GLASSES, just in case those rubber straps (for whatever reason snap at the end) and come back and and hit your eye. Just to be safe.

Where did you get that rear sight and what could it cost???

@hudsonhertz

8 ай бұрын

I got it on Amazon for about $26, here’s the link… a.co/d/anhC6zL

Wow. Amazing👍😍

It will be more better, if you will make a "ring" from the toothbrush "heads". See more information about this on Joerg Sprave's slingshot channel.

this is pretty dope! my only thought is this technically isn't a sling-bow lol. sling-bows are much more similar to a sling-shot, where you still have to hold back the bands. (for reference i'd recommend checking out SimpleShot's Hammer sling-bow) what you have made however is something equally as awesome, a sling-crossbow! i might honestly have to make one for myself, so thank you for sharing!

@hudsonhertz

11 ай бұрын

Awesome, thanks for the comment! I really didn’t know what to call it but sling crossbow sounds pretty on point 👍

👍👍👍

好有趣，不过箭支好像有点海豚跳

👍👍

I love your videos when you do stuff like this❤

i think you shoul get bolts that are heavier and shorter than arrows, it will be more accurate

Just get a crossbow

Is cool

😮👍

❤️❤️❤️❤️

arrow doesn't seem to straighten fast enough. Perhaps need helical fletchings.

Better suited for sling darts, yo.

Hi buddy try this slingbow hunting rabbits 👍

Hi,New to here , plz suprt,learning slingshot to hunt from 2023 thanks

I'm concerned that those 2 screws might give. That's a lot of energy stored and pulling on those and if they give while your behind it your gonna have a bad time. Especially if you add more bands.I'd consider bolts set backwards with nuts on the outside. Router or chisel just enough out of the end to set the bolts.. maybe even drill out the endpiece to suport slightly thicker bolts. Or use thick dowel rods that extend the stock to add suport to the end plate and in the end suport the upper part of that endpiese.. so not all the torque is on the screws

@hudsonhertz

10 ай бұрын

Ok, that sounds like a worthy upgrade. Thanks for the comment!👍