Slim Tower Coolers Tested - Feat. the ID Cooling SE-207-XT Slim!
Ғылым және технология
135mm. We're flying pretty close to the sun but still keeping things peachy with these two. If you need a tower cooler for your Ncase M1... both of these are great choices.
As an Amazon Associate I earn a small commission (at no cost to you) from qualifying purchases, thanks for your support of the channel!
Coolers:
ID Cooling SE-207-XT Slim: links to follow
Thermalright SS135 Silver: amzn.to/3pHOgEQ
Thermalright SS135 Black: amzn.to/3R75GGt
Fan Upgrade Options:
Noctua NF-A12x25R: amzn.to/3QPhehJ
Noctua NF-A12x25 Black: amzn.to/3QOP2eO
Phanteks T30 - amzn.to/3dhaHxA
Build Components:
Case: Cooler Master NR200/P- amzn.to/3aSeBtz
Motherboard: Gigabyte B550 ITX - amzn.to/3cllu9C
CPU: AMD Ryzen 7 5800X - amzn.to/3Svsxgi
GPU: EVGA RTX 3080 XC3 Ultra - amzn.to/3lBiwjb
RAM: Crucial Ballistix 3200mhz 16GB kit - amzn.to/3pNrpbX
Power supply: Cooler Master V850 SFX- amzn.to/3nBKb3j
Пікірлер: 93
You are one of my favourite Bald Men in the internet
@thorfinnthegoatmc
Жыл бұрын
Thats too specific 💀
@MakemeSumMuffins
Жыл бұрын
@@thorfinnthegoatmc It is true though. His content really helped me build my first SFF
@aalsmail
Жыл бұрын
One of ... I know the other😆
@patlotpotlot6154
Жыл бұрын
@@aalsmail paul?
Finally after hours of scouring the internet, I found a video comparing these three coolers!
Just putting this out there so others don't make the same mistake I did, but the combination of the SE-207-XT Slim, NCase M1 v6.1, and MSI B650I Edge does not work. The cooler does fit flush with the case, but it will block the internal power cable in both available positions.
You did it! I love taking a $50 heatsink and throwing in T30. Maybe 0.5-1.0 degrees difference but runs silent.
@alen.mp4162
Жыл бұрын
does it remain 135mm? or does the fan increase its height
Re: Attaching a Phantek T30 with 25mm clips, I found a simple solution that avoids over stretching the clips. Use very small zip ties. Zip four of them to 5mm long loops, when flattened, clip off the extra then push them into the top screw holes. The heads will stop at the holes. The loops, extending 5mm down, making perfect attachment points for those 25mm clips. They even look good, almost like screw heads.
Man,your content is still relevant one year later.Nice.
I just went with the DeepCool Ak400 Zero Dark+.....i was sweating bullets when i finally closed it all up but it all fit in the NR200. Very impressed with this case & my first build too!
I purchased the Thermalright Silver Soul 135 since it's the biggest cooler that I can fit in my current case (a Thermaltake Core V1). The price-to-performance ratio of this thing is insane! It didn't just put the AMD Wraith Stealth stock cooler to shame, it tarred and feathered it and paraded it around the town square! Kept my 5700G around the 55-60C level even at full load for an hour or two. Granted, my tests aren't scientific (just a couple of resource-intensive PC games) and the cooler is overkill for the type of processor I want to keep cool, but I'm beyond happy with the performance of this thing. It helps that the cooler is low enough that it'll fit into an NR200 with ease.
@holmiumh
4 ай бұрын
Just for the interest of information, SE-207-XT Slim does fit in my TT Core V1. Works well for my R5 5500.
Thank you very much for this comparison. 135mm is also the cooler height limit for the soon to be released Lazer 3D LZX-10 PC case.
Thanks for the much needed unique tests.
Just for reference the newer 154mm tall "Advanced" version of this is $54 here in SEA region. I've seen an international seller(located in Malaysia) list this for $71 but it should be lower for local retailers.
You sir are a PCMR god amongst PCMR mortals.
I'm considering this cooler for an NR200P build using the 7700X. It seems like it's the biggest cooler that fits using AM5 and the TG panel. Would you consider it to be the best option? What I find strange is that I can't find any builds using AM5 with the NR200P, am I not seeing something?
Thank for your review , you helped me a lot
Hi @MachinesMore the PA 120 Mini is 51$ in our country while this one, the SE207 XT slim is 37$. Is the PA120 mini worth it over the 207 XT slim?
may i know if the the tempered glass able to closed with this id cooling se 207xt?
Surprised to see that NH-D12L underperforms a bit given the circumstances. Disappointing. Was considering it for my NR200P as I love Noctua products. Now I’m not sure. It’s too expensive for what it offers.
Wonder if the 207 would work with a 5700x3d
thx for the video. which fan clips can i use for the a12x25 chromax on the silversoul 135. just ordered a a12x25 but dont know how to mount safely
Would love to see the d12 vs The Soul 135 vs the Thermalright Assassin King 120 SE CPU in a 200+ watt, sub 150mm shootout. And if you could post the watts not just the cpu and clocks. Thank you and great job 👍
Can you test the DeepCool AG620? I'm interested in using it if I end up buying an NR200P but it's 157mm so I'm not sure if any motherboard would fit it
@effect4545
2 жыл бұрын
It wouldn't fit if you want to use a glass panel. I've tried the deepcool neptwin 2 in my nr200p, but it is too tall even for mesh... Now I'm using the scythe fuma rev.b which is 149mm tall with a glass panel and it fits perfect)
@GonzoGaming22
Жыл бұрын
It will fit ,youll have to take the plastic covers off the top of the rads in order for the side panel to be in place .
Thinking of doing an nr200 p build , is this better than the scythe fuma 2 rev b ? Thoughts ? Help ? Thank you 🙏
Where can I find an extra fan to add on the front of the 207xt slim cooler?
@DARimpo
Жыл бұрын
This tbh, I can't even find the fan in both retail and online shop
Looks nice? But there is zero availabilty
Which one is the best for you? Could I know why? :3
is there sufficient space to mount a 25mm fan on the non-RAM size?
do you need a special fan clip to add the a12x25r on ss135?
@TheJeep3000
11 ай бұрын
Did you ever find out?
@bottle-xz5hp
11 ай бұрын
@@TheJeep3000 no, i never got that fan.
If I did a dual-fan configuration with this cooler, would it be good for cooling a 12600K?
@stance1x
Жыл бұрын
Yes
how is the ID Cooling vs Mugen 5? i have a 5800x with Mugen 5 and it is still throttling at 90c when I run benchmarks.
The sound needs a little bit louder, else is fine :)
is this better than se224xt? or just around the same?
This thing is around $39 in Indonesia
I wonder what would be the better between 207 and 225 XD
Does anyone think the thermalright can cool a 5800x3d well? I’m thinking of returning to air cooling in my ncase
@gwj3264
Жыл бұрын
I think 5800x & 5800x3d has to use cooling water cooler. However, only for enjoying games, thermalright and this one would be okay.
@TheJeep3000
11 ай бұрын
A little late but maybe someone still wants to know: my 5800X3D in a Ncase M1 is beging cooled by the ID Cooling SE 207 XT SLIM and it's great. 82 degrees maximum
@MikeMJB
8 ай бұрын
@@TheJeep3000 I'm planning to purchase that cooler, did you undervolt your cpu? I'm buying that one too!
@TheJeep3000
8 ай бұрын
@@MikeMJB No undervolt, no overclock and just regular settings in BIOS. DOCP/XMP for memory is 3600mhz is the only change I did. Temp is great
Will work in a NR400? Thanks
would this cool my ryzen 5 3600? its so hot even in idle with the stock cooler
@alen.mp4162
Жыл бұрын
its so much better than stock cooler, plus 3600 is easy to cool down
Will the se207 fit with tg?
is the extra 2 sets of fan clip for standard 120mm fans ?
@IDCOOLING
Жыл бұрын
Standard square 120mm
@user-qn1zj5bs5p
Жыл бұрын
@@IDCOOLING what do you mean? Square mounting hole or round mounting hole?
@user-qn1zj5bs5p
Жыл бұрын
@Bona i see , i thought is the same fan clips for the circle stock fan
What cpu would you recommend for people like me that are going to build a pc in the nr200p for music production and light gaming? I am planning on buying the rtx 3060 as well
@pietrmuffei8874
2 жыл бұрын
12400 or 5600 without x, 5700x if you want 8 cores. But wait about a month for new chips like 13400 (maybe no launch this year but Raptor Lake announcement ) and 7600x. Prices will drop for older chips
@leonard6381
2 жыл бұрын
@@pietrmuffei8874 Tysm bro. so you mean the 12400 with no F?
@matija2348
2 жыл бұрын
@@pietrmuffei8874 why not 5600x, and what cpu cooler would you recommend for a case like nr200
@pietrmuffei8874
2 жыл бұрын
@@leonard6381 yes, 12400 without F. The iGPU might come in handy for applications that benefit from its quicksync feature.
@pietrmuffei8874
2 жыл бұрын
@@matija2348 Fuma 2, Vetroo V5, 212 Evo. Check this channel it has a lot of NR200P air coolers tested. 5600x barely worth the premium. At 150 bucks the 5600 is a no brainer and can be overclocked.
This cooler is not available
Can a slim 120mm fan be mounted on the ram side?
@MachinesMore
2 жыл бұрын
You can, fit is completely dependent on your RAM height though, and you’d be looking more at 150mm with low profile kits.
@hys.inzomnia
2 жыл бұрын
@@MachinesMore If it improves thermals i think its worth it. Especially for the NR200 with the tempered glass where id rather get a few mils of safe clearance
@ailluinthethyra6139
2 жыл бұрын
@@MachinesMore Are there clips for 92mm fans?
I saw this selling for around the same price as SE 226 xt. Do you recommend getting this instead of the 226??
I dont think comparing cooling performance at fixed rpm makes sense. The Noctua is so expensive because it delivers lower noise levels at higher rpm. I dont mind 2 extra degrees as long as its under 90. There is no need to improve performance. But with small cases every descibel counts.
Is this enough for a 13600k?
@stance1x
Жыл бұрын
yes
@sensenpratama
11 ай бұрын
easy can handle it
@stance1x
11 ай бұрын
I stand corrected, my cpu 13600k was fighting for its life with the 13600k. I now have the pa120se and 7800x3d With nonissues
I have the se224xt currently in my sama im01 case is it worth upgrading to this or the advanced version?
@stance1x
Жыл бұрын
get a thermalright pe assassin 120 se
Will this cooler be better than the Thermalright Peerless Assassin 120 Mini?
Well just got a message from id cooling and this won’t come out in the us , if you go to their KZread channel and look at the comments you will see for yourself smh I really wanted it
@IDCOOLING
Жыл бұрын
Yup we don't have a plan to release this in the US in the short period
@ailluinthethyra6139
Жыл бұрын
@@IDCOOLING Will this come out in the Philippines?
@IDCOOLING
Жыл бұрын
@@ailluinthethyra6139 it will!
@samven582
Жыл бұрын
@@IDCOOLING, why won't you release this?
@IDCOOLING
Жыл бұрын
@@samven582 we just don't plan a shipment to Amazon yet
D12L is too overpriced and ugly. Thermalright 135 + higher RPM fan is the superior choice here.
how much ?? where to buy ??
@MadKatBoss
2 жыл бұрын
Watch the video
Bulky and cheap. Will get this next time over deepcool.
you missed one of the most important questions when someone wants to buy a air cooler. ram clearance