I have NO idea how I ended up in this corner of KZread, but this was interesting to watch! I never knew any of this stuff existed, let alone was something one could do outside of a factory. Now I kind of wish I had a need for this just so I could try it. 😄

@ttoskaa1474

3 ай бұрын

I was trying to finde out how to make my own ww2 tank models for ballistic testing 😭

@therealdonnawagner

3 ай бұрын

@@ttoskaa1474 KZread algorithms are whack. LOL I look up Christmas cardmaking and they return Eugenia Cooney content. Wut? 😂

I have watched competition shows on TV and have wondered how the appliances for features were made. This has been truly informative.

great explanation and demonstration of what deadener does...never used it and was curious

the most direct and surprisingly informative silicone video I've seen so far, thanks

@bitymoldsupply

Жыл бұрын

Thanks!

@Mrrajput-hs8xv

5 ай бұрын

​@@bitymoldsupplysir I am from India and I want to make a breast model but I want to do some changes in this design for my purpose so can you provide me full details of materials that you used in this video because I don't know English so well

labelling the remnants is a great idea

Very Informative. Thank you

This has been so interesting to watch. I have absolutely no application for this,...but now I want to play with it.

@artbyrobot1

4 ай бұрын

use it for your humanoid robot butler build

very good i like this technic

this was exactly what i was looking for thank you so much

@bitymoldsupply

Ай бұрын

Glad I could help!

man you are amazing really really ditaled tuotorial i wish i knew this channel befor thank you very very much i definitly gonna make an order from the site

@bitymoldsupply

3 ай бұрын

Thanks!

Love it , thx

@bitymoldsupply

3 ай бұрын

Glad you like it!

Thanks a lot. Now I can make my full body personal toy at home

@A_sir_that_likes_rock

3 ай бұрын

good luck 👍

@bitymoldsupply

3 ай бұрын

Uh...

@rawrloler

2 ай бұрын

@@bitymoldsupplylmao thanks for the video for real you are a true scientist

Looks like a good simulation for pitting edema.

@bitymoldsupply

2 ай бұрын

We are about to introduce a new additive for this application.

Super interesting. I'm very interested in prostetics, so I see it's application. We aren't 12.

Is there any way to reinforce the softer silicones with any particular fibers to make them stronger and still remain soft?

@bitymoldsupply

Жыл бұрын

Fiber or fabric would change a lot. If you want a stronger outer skin use Gel-10 or Gel-OO.

Thank you for tutorials. Could I use this mixtures to do the Nose Posthetic.

@bitymoldsupply

Жыл бұрын

You can use this technique and materials for a simple prosthetic. Gel-10 and Gel-OO have a higher tear resistance so they are preferable for prosthetic applications.

Could you mix your pigments/flocking in Silicone Fluid to spray on a cast piece for a colorant?

@bitymoldsupply

Жыл бұрын

You can. I am working on a new tutorial where I do that for my pigment + flocking.

I see that the LV and the smith deader formula are both sold out in small batches would using the XP-690 have similar effect?

@bitymoldsupply

2 ай бұрын

Yes, but we will also be releasing a new Prosthetic Additive very soon!

Can these products be used for a full realistic head mask?

@bitymoldsupply

Жыл бұрын

For a full head mask I would recommend our PlatSil Gel-0020 or Gel-0030.

Can you use standard power makeup as a pigment in silicone? (I once used it successfully with expanding foam.)

@bitymoldsupply

2 ай бұрын

Possibly, but there are a lot of different makeup products. Always run a test first too make sure everything is compatible and stable over time.

Im going to suggest you use a catheter tip syringe to draw up equal portions when dealing with very small amounts.

@bitymoldsupply

2 ай бұрын

As long as you avoid syringes with vulcanized rubber plungers you are good to go!

If I use the deadener does the silicone still stay skin safe?

@bitymoldsupply

6 ай бұрын

Yes.

Is it the deadener that gives it the tac? If so then what would be used as it seams the Smith's deadener is no longer available?

@bitymoldsupply

4 ай бұрын

We have a new additive coming very soon! We might still have some of the old formula if you want to call to order.

sir i have a question i want to make a hollow hand glove . i have a cast of my hand , but donot want to make a solid silicon hand but hollow hand please can you make a tutorial on that

@bitymoldsupply

3 ай бұрын

That will require a core mold. Maybe in a future tutorial we will cover that.

Is this silicone ok for making silicone masks??

@bitymoldsupply

Жыл бұрын

Yes, this technique may be used for silicone mask but I would not recommend this high % of Deadener. Neill Gorton has a great Mask Making DVD that uses Gel-10 + Deadener Gel-10 in similar fashion to this and it results in a VERY realistic mask with excellent movement.

Could you combine softener and deadener? It looks like the deadener makes it a little too slow to rebound.

@bitymoldsupply

3 ай бұрын

Deadener is a softener, but if you just want to soften the silicone and not lower the modulus, you can soften with silicone fluid.

@noire1001

3 ай бұрын

@@bitymoldsupply I'd like to soften it as much as possible, but have the rebound be a little faster than what was shown in this video. I was hoping I could fine tune the rebound rate by substituting some deadener with silicone fluid maybe.

I want to make a gel to simulate fat tissue in a breast form: what ratio of a to b to deadener would I use? I am going for a realistic approach that incorporates how natural breast tissue doesn't stay still and constantly moves and jiggles and ripples.

@g90oc

4 ай бұрын

If I did it would people find out?

@bitymoldsupply

3 ай бұрын

You might need to use a combination of additives.

Can this same process be used in phallus shaped molds also? Or is that a different process

@bitymoldsupply

6 сағат бұрын

Lol!!

can you practice tattooing on it? like if you make a sheet or something?

@AliceAbernathy2010

6 ай бұрын

Has anyone tried this yet? I'd like to know too!

The part you cassetted is too soft, what changes should be made in the measurements to make them a bit harder?

@bitymoldsupply

2 ай бұрын

This was made to demonstrate the extreme soft end of the scale, so this used the maximum amount of Deadener. You can not add as much as I did and have a firmer silicone. The replacement for Deadener is "Prosthetic Additive 1" and it will be available on our site very soon.

@Nasicostume

2 ай бұрын

@@bitymoldsupply Thanks so many for the reply😀😀--- What is the mixture of blue color silicon used in head cassettes, the formula used, (I don't understand the A&B formula) what is it? Which product you select for it.

Please tell me the materials needed to make the sample you showed in the first minute

@bitymoldsupply

2 ай бұрын

All of the supplies are linked in the video description.

Hey, I've been thinking about making a latex Halloween mask, now, i heard the best type of mold for that is a plaster mold, but my concern is that i heard plaster molds dont retain detail very well after a few pulls, is there a better material for casting latex? Or should i just make a resin master of the sculpture?( Sculpture > silicone mold > resin master)

@bitymoldsupply

Жыл бұрын

Hydrocal and Ultracal both work great for casting latex masks. Ultracal holds the detail best, but requires more time for the latex to dry.

@GDSVHorrorCosplayingArchive

Жыл бұрын

@@bitymoldsupply thanks! Just one more thing, i was kinda hoping to make a master cast of the sculpture so that i can always make new molds when needed, is there a way to do that using a ultracal mold? Or do you recommend something else for that?

Can this silicone material be used in a 3D Printers ?

@bitymoldsupply

4 ай бұрын

I have not heard of this material being used in a 3d printer. We do have customers printing parts and molds, but not printing silicone...at least not yet.

@Beauty.and.FashionPhotographer

4 ай бұрын

@@bitymoldsupply there is a silicone material manufacturer who explained to me some time back that they have silicon which can be printed with 3D Printers.... wanted to share this with you.

Is it working with 0030 skin cast?

@bitymoldsupply

Ай бұрын

We are about to release a new softener for our platinum silicones. Once it is available I will be posting a follow-up video to this one.

Are any of your silicone safe to wear on the skin

@bitymoldsupply

3 ай бұрын

Yes. All of our platinum formulas are safe for skin contact.

@seanfarrell1832

3 ай бұрын

@@bitymoldsupplydoes that mean even the life cast/ deadener combo is safe for skin even when it’s tacky? I’m assuming less deadner means less tacky? How long does that keep its self adhesive properties?

@bitymoldsupply

3 ай бұрын

@@seanfarrell1832 Deadener is safe against the skin. That said, if you are working with an actor or actress with very sensitive skin you can always have them wear a small swatch of silicone on their wrist to see if they have any negative reaction.

Is this silicone body safe?

@bitymoldsupply

Ай бұрын

This is safe for skin contact in cured form, but not suitable for lifecasting.

its ok to press that thing once for demo...

@bitymoldsupply

3 ай бұрын

Lol!

Um.....mine don't do that....there's no delay......

@bitymoldsupply

Жыл бұрын

Mine do.

Hello, how to make artificial skin for tattooing?

@bitymoldsupply

2 ай бұрын

kzread.info/dash/bejne/eI6FuMmpm6XUcZs.htmlsi=2uo0B9e-Hbj7FAnr

Name silicon??

@bitymoldsupply

3 ай бұрын

All the products are linked in the video description. More info on our website.

you should not have showed me this... oh lord the things im gonna make

@bitymoldsupply

3 ай бұрын

Uh oh!

lets say someone lost their breast and wanted to make such prosthetic model to mimic the lost breast, HOW WOULD YOU STICK IT ON THE SKIN?

@flawerflower1793

3 ай бұрын

please answer it, it's very crucial information.

@bitymoldsupply

3 ай бұрын

Sorry, I am not getting notifications for comments. A cosmetic silicone adhesive can be used (like Snappy G or Silabond) or this could be held in place under a bra. I am sure there are other ways, but that is outside of my expertise.

@cvspvr

Ай бұрын

you're a guy, aren't you?

@bitymoldsupply

Ай бұрын

@@cvspvr are you asking me?

@cvspvr

Ай бұрын

@@bitymoldsupply no

720p in 2023?

@bitymoldsupply

Жыл бұрын

Oops??

@rorypenstock1763

Жыл бұрын

For me, anything more than 720p is overkill.

@audreymai2773

Жыл бұрын

@Rory Penstock I agree, but I am biased and grew up on probably 50p! 🤣