I'm addicted to your videos... Such an underrated channel...

@kegomania

3 жыл бұрын

Bro this dude is on it.

@cloudrhezii

3 жыл бұрын

Damn former trickshotter how ya doing 😂😂💪

@orangetruckman

3 жыл бұрын

So underrated!!! I keep trying to get people to subscribe and help out hero out! The more we support him, the more information we can be provided 🤗 I wish I could live near Richard, that way I could in any free time. Love this channel 😆

@Ghostman86

2 жыл бұрын

I really like your videos man. The knowledge you possess and the fact that your just giving it away is awesome!! Keep up the good work 👏

Richard, you are sharing an amazing amount of data with us and it is all good, solid credible info. Thanks a ton for doing these vids for us as it is not easy to find this sort of information.

"THANK YOU!. "Richard your engine dyno videos/Dyno print out explained helps me take my mind off of me having cancer & my chemotherapy treatment's.."LMAO!.."CUZ!.."4 whatever reason when I'm in pain I put on your videos & I don't think about the pain..."THANK YOU RICH!

@bobbytarte2299

3 жыл бұрын

I don't know you but God bless you and be with you on your fight. I will be praying.

@p1fly

3 жыл бұрын

Get well soon brother

There's more info on this video than an entire turbocharger book. There was a day when no one would share this detailed dyno test, thanks for posting Richard!

Love the work you are doing. Very informative. Biggest thing I noticed from twin turbos vs the s480 was the back pressure. That s480 has a lot of back pressure on the high end. To me, seeing how much less back pressure the twins had is very appealing to me. I would think a setup of properly sized twins would last longer on a motor vs a bigger single turbo.

I swear I get more hyped every time I watch another one of you videos, finding your channel has been the most exciting thing that’s happened all week, keep the amazing content coming Richard 😁

@richardholdener1727

3 жыл бұрын

Yay! Thank you!

This is literally the only video or document that has genuine data showing why twin turbo may be better. I see almost no one talking about back pressure. This channel literally answers the question of: Is SINGLE or TWIN TURBO better, and the answer is very situation based: More responsive single turbo can be better than less responsive twin turbos A single big turbo may be worse than twin of the same turbos at the same boost, for both longevity and power. A bigger but more responsive single turbo may provide outright more power everywhere and be more responsive everywhere than an incorrectly sized twin turbo. This channel is an absolute goldmine of information. Thank you for making these!

@richardholdener1727

2 жыл бұрын

twins and single come down to packaging

@LSpower7.0

3 ай бұрын

bigger hot side, single Turbo set up right is as good as twin, mine is a big 98mm T6 makes 1500hp pretty easy but my motor is build to handle more than that, I only push it when I'm after a number at the drags, another problem is where to put the other Turbo, my engine guy told me what to buy to achieve that which I did, my car is a Chevy SS in the USA on the street is just dumb running it that high can be dangerous also

Found this channel a few weeks ago and it's addictive. Real world testing and proven dyno results can't be argued with. Thanks Richard your doing God's work!

@richardholdener1727

3 жыл бұрын

go tell 1M friends

Great stuff. Been reading your articles and books since the MM&FF days. Always learn a lot form your testing.

You are great Rich! Thank you and the gang that set you free to do this. Steve Brûlée’ is another great guy. These videos make me so happy to get to see! Thank you so much.

Thank you Richard for all your content, I enjoy having your videos playing in the background and listening to them, if you have ever considered doing a pod cast style show where you talk about these things I know I'll be happy to listen 😁

Great work! Thanks for sharing all the knowledge and videos, I see your channel growing fast.

Man great content!!! Answered a lot of questions for my 6.0 build I had on back pressure!

Bro you got the best channel on KZread. My new favorite!

This channel is going to blow up really soon. Better yet, its gonna be crawling with people having intelligent conversation and seeking improvement. Finally.

Thanks Richard! This is what I've been looking for.

Love the testing you do, following with great interest from🇦🇺

I like how you listen to your audience, great videos!

Thanks for doing this test! I asked for a twin vs single test and you did it -cool! I was surprised that the curves down low were so similar, I would have thought the twins would have spiked torque early in the lower rpms - very interesting.

I love so much about these videos. One cool feature is when your boost pressure is higher than your backpressure, your pumping loop (from the PV diagram) adds to the power rather than subtracting from it.

Richard do a video on how to properly tune an engine please.

@bill2178

4 жыл бұрын

It would take 50 vidys

@bobhilly546312156332

4 жыл бұрын

bill2178 even the basics to get most people up and going

@ufarkingicehole

4 жыл бұрын

He addressed it.. get your air and fuel dialed in then dial in timing for max power It's that simple

@chevybub6094

4 жыл бұрын

Yeltom Automotive “I KINDA ONLY WANT HIM TO TUNE MY MOTOR WHEN IM FINISH I WATCH HIM SO MUCH I JUST TRUST HIS EXPERIENCE MORE THAN ANY SHOP I COULD WALK IN KNOWING NOTHING ABOUT

@chevybub6094

4 жыл бұрын

Mr flimflam fremdippity danyet NOTHING SIMPL ABOUT THAT TOO ME I WISH WHAT U SAID WAS SIMPLE TO ME 🤣😂🤣😂

another great video richard, really appreciate what you are doing!!

Been Waiting On This One! If Possible, Can You Do The Same Test On Any Small Block LS? Preferably A LS1 Or LS2? Great Video!

@32bitcal69

4 жыл бұрын

Ummm... I would worry heavily if the gen3 stock ls1 rods are going to stay in the block north of 700.......

@701garage

3 жыл бұрын

@@32bitcal69 hey has had them well over 1000 hp

would love to see that test on a 6.0L LS

I appreciate all this fantastic data for free thank you Richard

Thnx for all the awesome vids and info professor X

DUDE !! I LOVE YOU !! You work your as off to educate me..THANK YOU !!

Thank you, thank you, thank you... Been waiting for this test for a long time. Started building a pretty close build to this a couple years ago but life etc. got in the way. Always new that it would be a cheap monster. I would love to see the difference between the twin gt45's and the s480 with a cam that was purposefully designed for the back pressure of each one. PS... YOU HAVE ONE OF THE WORLDS GREATEST JOBS... I'm seriously jealous.

Yes, lots of really good information here. Thank you.

This is one seriously fantastic video Richard! Thank you!! :)

I’m also firing through all of your videos, thanks rich

Great job Richard , with stock bottom end, nice!!!

Love all this info you provide in the videos

Thanks again Richard for more great content I don’t see anywhere else . I’m a big block guy and loved it , I run two 369S Borg Warner’s and make tons of power at 6800 with big torque instantly all through a CSU blow through ad I haven’t made the jump to EFI yet .

@danielsullivan9865

4 жыл бұрын

Do you have back pressure problems? What's your turbine AR and how much boost and how many cubic inch

@marcstlaurent3719

4 жыл бұрын

Daniel Sullivan , don’t know my back pressure but makes 1340 to the wheels at 20 lbs through a 4l80 and a nine inch , figure 30 % drivetrain loss at 6600 where rev limiter was set . Boost curve still climbing at 45 degree angle on graph . 555 cubes AFR 335 heads 8.3 compression 29 degrees timing . Turbine 1.0

@LT3Fluffy

4 жыл бұрын

@@dj4monie most people dont need and/or cant handle 1300hp. Most people will be happy with a small cheap engine with a small cheap turbo sending out 5-600hp that dont have to worry about a 5000 dollar rebuild

@BBBILLY86

4 жыл бұрын

@@LT3Fluffy agree. Plus another $7,000 in torque converter, trans, drive shaft and rear axle to have a chance behind 1300 HP

@marcstlaurent3719

3 жыл бұрын

Bill Jr I know what your saying , in my 5000 pound truck it’s 10,000 in a trans , torque converter , controller and another 5-6 thousand for the fab nine inch with a wave lock diff and Wilwood brakes to be reliable and stop great without the annoyance of a spool which I have tried , but it wasn’t about doing it on a budget it’s my street sleeper quiet/docile cruising flat hood truck that I drive everywhere, go to car shows , flog at the track , parking lot slaloms , that I’ve owned for seventeen years and just keeps evolving. If I was just looking to build a quick car it would be a 5.3 or 6 litre with a single turbo running the Holley Terminator so it would be easy tuning . Btw my truck still uses a high end blow CSU carb and drives mostly like a fuelie as nine years ago too many people were having problems with the Fast system as that was really the only high hp option st the time .

Thanks for the back pressure stuff and all the other data

How do you not have 1m+ subs, you are moving the HP bar/$ to a new level! I am officially recruiting everyone I know....

Great video, thanks for posting.

Just found this channel,I was so confused not much anymore,I'm getting me another job..lol or draw the line on ideas.Thank you Richard 👍'd & subscribed.

@richardholdener1727

2 жыл бұрын

Welcome!

Thanks for the knowledge.

Am a subscriber.. such a amount of valuable information and details!! Keep it up champ👑

@richardholdener1727

2 жыл бұрын

Thanks for the sub!

@ghostofsparta6579

2 жыл бұрын

@@richardholdener1727 thank you for your time and efforts explaining & spreading awesome high quality and detailed information in a very interesting & simple way for us to understand in a video that is so much fun and exiting to watch I can't thank you enough sir👑

You need bigger injectors? I know a guy ...

@dallastoodessa166

3 жыл бұрын

Oh shit dude, you're famous. I bought a Sonoma just so I can find and roll a fairmont home.

Great videos! Keep them coming. I would like to see you design and build combinations that would fit in a car. That is what most people are doing and most of what I see you do will only fit in a Dyno room..

That was a great video , I learned a lot from it . I think for the long run I’d probably go with twins because they’re inexpensive to replace and the back pressure is a lot lower

Fantastic tech Mr Holdener. Thankyou😁 The $850-$1000 on3 94mm and 107mm turbos would be very interesting! A 427 ls corvette made close to 1300whp with the 107mm here on youtube

O.K, so my brain can't think of any other testing to do! You broke the internet . it's over.. great job !!

@philipmacduffie7612

4 жыл бұрын

Diesels man. There is virtually no real test data out there on the internet.

I'm glad Richard shows these videos. So many people think that just because you throw twins on that you can count on double or tripling the output. There are many that believe it will be the same size twins gain over the single BC its double the size. All about proper sizing and ring gap with tuning. Richard is the man!

Great videos, Sir!

Been waiting for this video thanks.

Richard, could you do a vid all about cylinder compression ratios, octane numbers, and timing. Its the background content that ppl dont know about boosted motors and performance builds.

You really need a Patreon account. So much knowledge is being dropped here. Feels so guilty not paying for this. Awesome work Richard.

These uploads are always exciting and I can't click them fast enough. Thank you for doing this!

Kool Vid Richard.

That torque curve is awsome!

Great videos! I subscribed! Thanks

Holy crap that’s an amazing comparison

These videos are awesome. I would like to see more cheap supercharger options. How to make a manifold to adapt and tune.

Badass content! Thanks love it

Thanks for all your research. What a time to be alive! In the 60' and 70's, if a backyard mech was getting "1 pony per cube", he had accomplished something. Now, motors like the LS/LT platform (5.3 ltr) are rated at 355 hp/ 390 torque and that is the baseline for the backyard mech to START with. With simple " bolt on parts", someone can easily double their HP / torque and have some fun. However, on the downside, I look at all my fav muscle cars now, knowing that a slightly tweaked factory truck could rip the doors off them and am sort of sad. What I wouldn't give to be 30 years younger, have the truck I have now and a bit more time.

I'm a die hard ford guy and I've seen 340s outrun big blocks many times and they were potent street cars in lets say a dart or cuda...but there's something to be said about how powerful/potent the 351 Cleveland/Boss engines were...just look at the career of drag racer bob glidden,multiple championships with Cleveland powered cars to the point the NHRA banned it to usher in the 500" rule and forcing the 351 Cleveland powered out of pro stock...so glidden builds a 500" cubic inch engine based on the Boss 429 were he dominated pro stock once again with multiple championships with that combination!

@Richard we often struggle with to restrictive turbine housing for some factory position turbo - Please test what is better maxing boost on small turbine housing or lower boost but more timing !

Big block Chevys have a special place in my heart, my paw paw has been bracket raced since the 70s and quit in 2004 and for as long as I can remember like back in 96 when I was 6yo he has always had some evil sounding big blocks sounds I will never forget!! You just cant beat how a healthy high compression big block Chevy sounds

So, properly sized single is the way to go. Less complexity, less points of failure and the same power and response. duly noted. Thanks, Man!

@bill2178

4 жыл бұрын

Quicker spool with twins

@177SCmaro

4 жыл бұрын

@@bill2178 If your single is sized correctly the difference in spool at a desired horsepower is negligible. That said, twins are often more forgiving and can be easier to package.

@1flynlow

4 жыл бұрын

wouldn't the best of both worlds be sequential?

@177SCmaro

4 жыл бұрын

@@1flynlow Yes but you're also compounding the heat unless you switch from one to the other. There is an easier but somewhat less effective solution to that, though. Get an little bit oversized divided scroll turbo and get one of those quick spool valves. www.suprastore.com/spquspva.html only problem is they're spendy but still cheaper then twins or sequential/compound.

@blow0me

4 жыл бұрын

where you watching a different video ?

Great job Richard 👍

Lots of good info an thanks for moving your head to the bottom right corner

I'm proud of you, rich Bloodviking

Man I’m so glad I found your channel. I have so many questions I wish I could ask you. I’m looking at doing a turbo setup on a gen 3 6.0L. It has a set of L92 heads and its carbureted. It also has an XR 281 cam. The engine runs good now in an S10. Could I still run a carb? What size turbo?

Great video love this information cheap horsepower

I love your videos, keep doing what your doing. I'd love to see what you would do with a GM 305 CID gas engine or a 6.2 litre GM diesel engine and I'll keep looking forward to your videos.

Thank you for what you do

That was great, I loved it.

Thank you. Nice video

Subscribed. Love the videos. Richard, I have a 2001 Silverado 5.3ls. I just use the truck to haul cars and sometimes I want a little more power. I don't need it, but it would be nice. I know I should probably put 3.73 rear end in. My next assumption is that a cam and tune would do everything I need. I want low end power. I really don't care about 5000rpm power. So, what do you recommend for a cam in that situation.....or do you recommend a different route? Price of mods is a key factor. Thanks

So much good info thanks 🙏

It everything A/R ARE THE KEY TO WORK PROPERLY.

Richard you are the best guy on KZread , I cant stop watching your videos so thank you! and thanks for letting me know that my heads are not so good= 317 heads . But anyway, Can you do a video testing high dollar turbo's vs cheap Ebay turbo's and maybe carbureted duel vs single plane intake's. Thanks again.

@richardholdener1727

4 жыл бұрын

have lots of single vs dual plane intake tests, check out the EBay turbo vs Summit S475 video

@mikestufano4961

4 жыл бұрын

Tim we just watched the gt 45 vs the s480 in this video rite here. Lots of good info. Kudos Ritchard!!!

THANKS FOR THIS VIDEOS! Enlightening to see the back pressure comparisons. What would you search in a cam for twin turbos knowing that they produce less back pressure? Can you give an example with this combo? Cam for single and cam for twin.

Very underated love this channel better than powernation

I never get tired of watching your very informative vids, which is ALL OF THEM. Eddie Australia 89 C4..

Love ur channel

Thank you!

Thanks gor very informative content. Please consider boost testing 80's vintage Chrysler 4 cylinder motors (2.2, 2.5). Am curious about power potential.

Great video 👍

Great info!!! Thanks!

Another fascinating video. I'm curious how we can predict these things beforehand by first looking at the turbomachinery compressor and turbine performance maps. I'm just thinking out loud if there is a way to explain that for a general audience.

excellent content!

Hey Richard. Are the gen 6 bbc coming with forged cranks or are you making that power with cast cranks. Either way. Im a gen 4 or mark 4 guy running roots style 671 stuff even with predators lol. But just curious about the stock lower end on those. Cast pistons?? Cast crank?? Forged rods im sure. I know they are all 4 bolt but not sure what the crank and pistons are. Thanks brotatoe. And keep up the killer videos. Im hooked. And now looking at twin turbos for my 73 pro street camaro.

good lord 7:15 that thing comes alive! I know not as desirable but can you run some combos and tests on TPI 350. turbo cam nitrous etc. seems like third gens are making a little comeback.

Great stuff !

This is what I’m doing to my 2003 6.0 Ritchard.Twins on a budget!!

I would like to see you do a Small Block Ford 302/5.0 . with twin turbos ! .

Suggestion for a future turbo comparison video: Run dual turbos appropriately sized with varying plumbing configurations between the exhaust port and the turbo. I'm very interested in seeing how variations in the volume of air between the exhaust port and the turbo (call this hot mess "the exhaust manifold"), the length of the run between the exhaust port and the turbo inlet, and the manner in which exhaust gasses are pooled/collected ahead of the turbo inlet. From what I've studied of turbocharging, the efficiency of the turbocharger should increase inversely proportionally to both the volume of exhaust manifold and the length of the exhaust manifold. That said, I think that the location of the collector and manifold plumbing format is going to have an impact. Additionally, with the exhaust ports having a cross-sectional area of about 1.9 inches² a 1-5/8 diameter tube between the head and a collector into the manifold should minimize available exhaust expansion opportunity in the manifold and maximize turbo pressure development. I'm curious to know how a log manifold performs compared with this. How about stacking a turbo onto the end of a flipped stock exhaust manifold? And whether there's any advantage to creating equal-length exhaust port primary pipes between the head and the header, or more simply running a straight pipe between the port and the turbo collector? Should the exhaust run in one pipe leading up to the turbo inlet or would dumping the collector straight into the turbo inlet work fine? Is there an advantage to staggering the collectors, like 3x 2-into-1 or is a straight 4-into-1 better? Unradiused steps in exhaust pipe diameter create wave reflections and superpositions in the exhaust stream that can help to scavenge ports - are there advantages or disadvantages to including such a step at the head with a manifold that does not exactly match the port size/shape? Is there an advantage to including a large or small step in exhaust diameter immediately before the turbo inlet, or before the collector? Obviously, there's a step in the collector that's almost unavoidable. Similarly to steps, square wells that waves travel over also create wave reflections on both sides of the well. Can such annular wells be used in turbo applications as a means of positively smoothing the inlet gas pulses?

Hey rich... Love your content. Could you do a video on how to ring gap a junk yard motor for boost?

Great video i definitely vote for the twin Ebay turbos setup at that price for about the same power for a fraction the price and better on the motor with lower back pressure that's a win win

I’d like to see that on3 107mm on the big block Orr.. just a LS 6.0. You should test that On3 turbo. Do it. Do it

@natedogg6283

4 жыл бұрын

Absolutely!!! With the 11 blade billet wheel

@FredAllenBurge

4 жыл бұрын

@@dj4monie $300 worth of turbos vs. $3000 worth of turbos lol, you're gonna have a hard time convincing many people that that would be worth it.

@FredBuildandFix

4 жыл бұрын

@FredAllenBurge the On3 107mm is around 1000$, really close to the s480 in comparaison at the end.

@BATworkshop

4 жыл бұрын

@@FredAllenBurge that depends if you are doing the fab yourself or paying someone to do it. The EFR saves money on fab work and on other parts, and probably most importantly is the tight package. In the german car world the engine bays are pretty compact so I can see the value. also there is something to be said for explosion rated turbine housings that some brand name turbos have for those that are interested in that.

@christophercasey8833

4 жыл бұрын

@@dj4monie this is why I'd like to see him do some videos on turbo comparison w/ direct competitors (by size, not quality)

You listened to the commentors about the graph being blocked by the pip of you. That's great.

I like your video whit stock bottom end ! I understand that you ajust ring gap for turbo but for durability of an engine would you increase rod and crank bearings clearance ?

Can't wait to see these setups in the new corvettes

The only thing I wish you had was the Turbine a/r. That's why the single starts to choke at 700hp and 10psi. They work better at higher boost for a couple reasons: the compressor efficiency is higher with higher boost, there is higher manifold pressure relative to back pressure or drive pressure and it keeps the whole system under pressure. With a larger turbine housing they will do way better for bigger engines or higher airflow. There is nearly a direct inverse relationship between turbine ar and peak drive pressure. This was awesome man, thanks.

Great video! What was the header tube diameter on your twin turbo 454?

It’s all about tha flow love it