Easy to follow. Knowing nothing about sewing machines I just set the feed dog timing on a Singer 6136 using this video. Thanks!
@stephenwgreen785 жыл бұрын
Thanks for the video. Great info & no wasted time😁
@1kakinha4 жыл бұрын
Thank you so much. I apreciate your ajust timing!👏🙏🏼🙏🏼🙌
@chadandrews985 жыл бұрын
Thanks! I was about to throw away my Singer 534 after the feed dog gear broke, but now I am going to try to fix and time it.
@amendez63585 жыл бұрын
This makes me wish I lived where you guys are. 😁
@realestateinfonet90413 жыл бұрын
Great video! Thanks!
@sarahfoxphotography3 жыл бұрын
Thank you!!
@eCitizen13 жыл бұрын
Excellent information. I set my feed dogs incorrectly 10 times before watching this video. I should have started here.
@susanaguilar28904 жыл бұрын
Can you tell me what size Allen wrench you used here? I'm replacing gears on my Singer 534.
@FabiolaGonzalez-ct6bk7 ай бұрын
Great video you feed dog
@31stjewels Жыл бұрын
Your videos are great! Thanks. I need help please with Singer Panoramic Model 9018. Underneath a 2" spring was hanging off at 1 side. Didn't take a pic. Next morning, i couldnt recall where it came from. There are 2 x 2"springs underneath. Other 1 fine - but where does 2nd spring go?
@BillOfAllTrades20163 жыл бұрын
Hello. I just picked up a singer 247 and when I turned it by hand it’s getting stuck. I opened it up and the bobbin case keeps hitting the feed dogs. The case has a low and a high spot. And the feed dogs are moving down when they should be moving up which is causing the bottom of the feed dog to hit the high spot on the bobbin case. Would the timing fix that? Or should I contact the guy that sold me the machine and give him heck for selling me a machine with big problems. The video was great. Thanks in advance .
@marilynjack60315 жыл бұрын
Need help with my 252 singer fashion mate timing is out can't seem to figure out how to get in to fix it
@ramilapatel53642 жыл бұрын
help. I have a singer 522 where, thanks to your video have timed my machine and replaced the bobbin gears as one was broken, hence it would not move fabric forward. Have checked the hook and it picks up top thread every time now. However, the machine will not pick up bobbin thread and refusing to make stitches. Have checked the bobbin and all ok. what could be the problem?
@patriciavaughan60864 жыл бұрын
Hi. Iam trying to change my rubber feed dog on a Singer Touch and Sew model 770 machine, how do I do it …..?
@GeoffreyScheid2 жыл бұрын
The 6233 is different. How to adjust the feed dog on the 6233?
@johnwoods6751 Жыл бұрын
Mine, 758, has smooth feed dogs., no grip?
@dmags294 жыл бұрын
This looks like it will solve my problem on my Touch and Sew Model 758 but could you tell me what type of screw is in the set timer? It looks like I might need an allen wrench. ??? Thank you.
@dcwatashi
4 жыл бұрын
Guess this guy can't be bothered to answer questions
@gouletpalexandre
4 жыл бұрын
@@dcwatashi Yes, allen bolt usually. But if you can't figure that out, I recommend leaving you machine with a pro...
@dcwatashi
4 жыл бұрын
@@gouletpalexandre i wasn't the one asking. so if you can't figure out who you need to answer to maybe you best leave your machine to a pro
@gouletpalexandre
4 жыл бұрын
@@dcwatashi haha good point mate, I hit reply on the wrong post!
@dcwatashi
4 жыл бұрын
@@gouletpalexandre 😂👍🔨
@zainabbello49125 жыл бұрын
I need spare parts for my singer sewing machine model no 790/760 magic bobbin is a rubber
@marcosantoniogoncalves4024 жыл бұрын
Quero legenda em Português.
@AbidHussain-jz7nv5 жыл бұрын
I need feed dog of singer 298 machine any body help to tell me from where I purchase.
@silviabarreto35742 жыл бұрын
Para conseguir repuesto de ese modelo
@nyataibabaltzgar56873 жыл бұрын
this was not help full to me shall i replace the hole component or just keep tinkering with it my machine is a 2008
@johncolvin2561
2 жыл бұрын
If was made in the year 2008, just buy a new sewing machine, Because most modern machines are disposable machines. One can usually buy a new machine for less than the cost of repair.
@The_Deliberate_Photograph3 жыл бұрын
I have a Singer 648, the feed dogs need to be timed, but there is no adjustment on the base of the machine to do this. The only drive gears on accessible only from the top, but there is no adjustment possible there! It appears the dogs are 180˚ out of phase and no remedy. Hook adjustment done and perfect. Thoughts? Help!
@johncolvin2561
2 жыл бұрын
Terry may be able to help you. store.tandtrepair.com/648sch.html
Пікірлер: 31
Easy to follow. Knowing nothing about sewing machines I just set the feed dog timing on a Singer 6136 using this video. Thanks!
Thanks for the video. Great info & no wasted time😁
Thank you so much. I apreciate your ajust timing!👏🙏🏼🙏🏼🙌
Thanks! I was about to throw away my Singer 534 after the feed dog gear broke, but now I am going to try to fix and time it.
This makes me wish I lived where you guys are. 😁
Great video! Thanks!
Thank you!!
Excellent information. I set my feed dogs incorrectly 10 times before watching this video. I should have started here.
Can you tell me what size Allen wrench you used here? I'm replacing gears on my Singer 534.
Great video you feed dog
Your videos are great! Thanks. I need help please with Singer Panoramic Model 9018. Underneath a 2" spring was hanging off at 1 side. Didn't take a pic. Next morning, i couldnt recall where it came from. There are 2 x 2"springs underneath. Other 1 fine - but where does 2nd spring go?
Hello. I just picked up a singer 247 and when I turned it by hand it’s getting stuck. I opened it up and the bobbin case keeps hitting the feed dogs. The case has a low and a high spot. And the feed dogs are moving down when they should be moving up which is causing the bottom of the feed dog to hit the high spot on the bobbin case. Would the timing fix that? Or should I contact the guy that sold me the machine and give him heck for selling me a machine with big problems. The video was great. Thanks in advance .
Need help with my 252 singer fashion mate timing is out can't seem to figure out how to get in to fix it
help. I have a singer 522 where, thanks to your video have timed my machine and replaced the bobbin gears as one was broken, hence it would not move fabric forward. Have checked the hook and it picks up top thread every time now. However, the machine will not pick up bobbin thread and refusing to make stitches. Have checked the bobbin and all ok. what could be the problem?
Hi. Iam trying to change my rubber feed dog on a Singer Touch and Sew model 770 machine, how do I do it …..?
The 6233 is different. How to adjust the feed dog on the 6233?
Mine, 758, has smooth feed dogs., no grip?
This looks like it will solve my problem on my Touch and Sew Model 758 but could you tell me what type of screw is in the set timer? It looks like I might need an allen wrench. ??? Thank you.
@dcwatashi
4 жыл бұрын
Guess this guy can't be bothered to answer questions
@gouletpalexandre
4 жыл бұрын
@@dcwatashi Yes, allen bolt usually. But if you can't figure that out, I recommend leaving you machine with a pro...
@dcwatashi
4 жыл бұрын
@@gouletpalexandre i wasn't the one asking. so if you can't figure out who you need to answer to maybe you best leave your machine to a pro
@gouletpalexandre
4 жыл бұрын
@@dcwatashi haha good point mate, I hit reply on the wrong post!
@dcwatashi
4 жыл бұрын
@@gouletpalexandre 😂👍🔨
I need spare parts for my singer sewing machine model no 790/760 magic bobbin is a rubber
Quero legenda em Português.
I need feed dog of singer 298 machine any body help to tell me from where I purchase.
Para conseguir repuesto de ese modelo
this was not help full to me shall i replace the hole component or just keep tinkering with it my machine is a 2008
@johncolvin2561
2 жыл бұрын
If was made in the year 2008, just buy a new sewing machine, Because most modern machines are disposable machines. One can usually buy a new machine for less than the cost of repair.
I have a Singer 648, the feed dogs need to be timed, but there is no adjustment on the base of the machine to do this. The only drive gears on accessible only from the top, but there is no adjustment possible there! It appears the dogs are 180˚ out of phase and no remedy. Hook adjustment done and perfect. Thoughts? Help!
@johncolvin2561
2 жыл бұрын
Terry may be able to help you. store.tandtrepair.com/648sch.html