Very clear instruction! Great!

@baldeagle242

7 ай бұрын

+@user-ks2vx4mn9k Glad it was helpful. Thanks for watching! Here’s a link to other videos I’ve posted that you may find useful. kzread.info/head/PL5_ZXmQpcjpac4UV8OW8g-IWVCR8tqy79&si=RKfnQL-PAcZFy67a

Taking the pedals off is Unnecessary more work than it's worth - Just follow the pedal linkage and remove the quick pin Now you can remove the main fender body - I learned that from Retirement with Pete on youtube he has good tips cleaning the covered area is a very good idea and checking the fuel line

@baldeagle242

7 ай бұрын

Thanks for the tip. 😁👍

I pressure wash most equipment I work on. Easier to spot issues as well as a more enjoyable experience all around.

You really know what you’re doing and how to get it done ✅ Thank You for information and advice 😊

@baldeagle242

Жыл бұрын

@Phillip Hall Thank you for taking the time to share your comment! I hope to see you around on future videos. 😊👍

Nice work! Beautiful tractor, Thanks Steve!

@baldeagle242

Жыл бұрын

@John Flanagan Thank you for taking the time to share your comment! I hope to see you around on future videos. 😊👍

Appreciate the channel has helped alot

@baldeagle242

2 ай бұрын

Thank you! I appreciate you taking the time to share your kind words. 😁👍

Another very good video sir. I like the idea of Cleaning it before you do much more work. I don't mind taking something apart dirty, I hate to put anything back together dirty . I enjoy your all your video. Very informative, and educational. Thank you 😊

@baldeagle242

Жыл бұрын

@Bert Grau Thank you for taking the time to share your comment! I hope to see you around on future videos. 😊👍

Just so you know, I usually have multiple questions or comments on videos, so I tend to separate them out for two reasons. First, so they all get answered because I’ve found if I include them all in one comment some never get seen or answered, and also because it makes it easier for a creator to respond without forgetting what was asked.

@baldeagle242

2 ай бұрын

Good to know! I try to help as much as I can.

I would put new nut or use blue lock tight, yes for sure replace the fuel hose

Great video Steve, job well done and a tidy clean up👍

Hey, Steve! I’ve been subscribed for quite a while but just realized I haven’t been getting notifications, even though I hit the bell. Hit it again just now, so I hope I’m getting notifications from here on. Great video, just like others of yours I’ve seen.

@baldeagle242

2 ай бұрын

Thank you. I haven’t posted anything for a while. My father isn’t doing well and I’ve been spending a lot of my free time with him.

I still have my gt235 I bought new in 1999 and also have the 1 my father in law bought new in 1999

I have a 235gt bought it new in 1999 have replaced that part 5 times. Over the years

@baldeagle242

Жыл бұрын

Wow, I’ve replace one on another 225 years ago but didn’t realize it was a common issue. Do you pull it all the way apart like I did or is there a better way?

Great job

@baldeagle242

Жыл бұрын

@George Martinez jr Thank you for taking the time to share your comment! I hope to see you around on future videos. 😊👍

Nice video Steve, sure is amazing what a little pressure washing can do. 👍

@baldeagle242

Жыл бұрын

Thank you John. I think pressure washing anything offers more return on investment in time and money than anything else you can do. Thanks for watching. 😁👍

@Big_Johns

Жыл бұрын

Yes sir, anytime brother.

my GX, needed a new battery, then an idler on the power belt started screaming so I changed both of those because the spring is a bear to play with, then the main belt gave up about 10 minutes later so since I had taken the foot rests and seat pan off for the third time I checked the fan and pulley and then did a hyd.oil filter change.

@baldeagle242

9 ай бұрын

+bagadonutz Thank you! I hope to see you around on future videos. 😁👍

Looks great

@baldeagle242

Жыл бұрын

@Kaitlyn Baker Thank you for taking the time to share your comment! I hope to see you around on future videos. 😊👍

Could a chunk sound while mowing mean that the pully teeth are missing the mark or worn out?

@baldeagle242

23 күн бұрын

Generally once it gives out it will completely strip out and the mower won’t move at all. A clunk sound could be many things. It’s tuff to know for sure without further investigation. 🤷🏻‍♂️

@2011studies

23 күн бұрын

​@@baldeagle242ok ty. I ordered a new pulley so I'm gonna try that first.

I have a gt245. The transmission bottle reservoir is between the lines indicating it is full. The other chamber that you suggested to not open is not full but 3/4. Should that be topped off despite reservoir full?

@baldeagle242

2 ай бұрын

You may have a clog in the reservoir.

That fan had multiple holes, at least one of which would probably line up with the single hole in the trans pulley. I’d probably insert a large Phillips through those to at least get a little more torque on the nut since I don’t have an impact yet. Being careful, of course, not to overdo it with that plastic fan. 😉🔧👍 Was the washer a Belleville or compression type?

@baldeagle242

2 ай бұрын

If I remember correctly it was just a standard washer.

Im having an issue with a Encore Caliber zero turn mower. When I go to release the parking brake the engine dies. I’ve installed a new parking break switch an bypassed the seat switch too see if it will keep going after releasing the parking break. No charge it still dies. Could this be a Fuse or Kill Relay issue? I have not tried using a multimeter yet.

@baldeagle242

Жыл бұрын

We have another video that shows a straightforward way to check safety switches. kzread.info/dash/bejne/loh2rMtrcrLShso.html This process will work on any small engine equipment. We only like changing switches once we narrow it down to the actual switch. To answer your question about fuses or relays... Most safety switch circuits work by grounding the coil to kill the engine and have zero voltage running through them, so they do not utilize fuses or relays in the safety circuit. You may also have a damaged wire or connection grounded out somewhere. This is not clearly demonstrated in the above video, but it is something to look for in addition to the switches themself.

Did you throw a little paint on under that footpad?

@baldeagle242

2 ай бұрын

I generally touch up any spots that need paint.