I love how old Silverado’s get to be, and how high mileage and yet people are still running them and how people who on them for 25 years are not afraid to tear into them and fix them.

@sdtangler

8 ай бұрын

My 2003 Silverado with nearly 300,000 miles, is running strong as ever. I am not particularly mechanical, but just replaced the wiring harness to the drivers door, and replaced the air conditioning control unit. I plan on keeping this thing running for another 10 years.

Very clear step-by-step description without any unnecessary "fluff" some guys feel compelled to add. Excellent camera work as well. Thanks very much!

Thanks for posting this video! Just for those with 04 Tahoe or similar, I had to remove lock cylinder to get cable out. Watch video on this and once removed, take a big flat screwdriver and insert in void from cylinder, put back towards park and it should fall right out. Now just replace with new one and put back into run with screwdriver. Then insert cylinder back in.

Okay your video by far best short to the point in and out 3 screws. I've seen others like 15 to 25 min disconnect the battery putting jack stands removing ignition switch wtf???? Like Mr obvious says you're a lifesaver thanks 👍

@misterx4088

11 ай бұрын

Thought the same thing...

Excellent video 👍. Good details, step by step. FYI....I didn't need to go to the dealership. Rockauto had it for $106 & some change.

Appreciate the time you took to show us how to repair the shifter. Thank you

Replaced shifter assembly and the right cable at the bottom is broken,great video.

Thanks for sharing. Same thing just happened to mine on the way home from working out of town. Got home watched this video and sure enough was the exact problem

I have a 2004 Cadillac Deville with this same mechanism and I swear it is possessed by at least one demon. About a week ago, I was leaving work but couldn't because the shifter felt like it was swimming in jello and had no effect on the transmission. It was dark and I was stuck so I turned on my flashlight app and started digging in. When I got the bottom plastic housing piece off, my Tourette's Syndrome went into full "Losing my mind" mode. The thing was broken in half. If my ride hadn't showed at that moment, I would have lit that car on fire and watched it burn. I have the new part but it has taken a week of solid searching to find something that shows me where the included cable snaps in. I don't understand why it wasn't connected or if I was so crazy by then that I disconnected it. Finally! You showed me where it goes. Hopefully I don't have to replace the handle but the traction control cable is also going to need splicing and reconnecting. If anyone knows of a bonfire in need of something to burn, let me know. I think this car would look great in flames.

@misterx4088

11 ай бұрын

Wow...and I thought I was out of control.....take a breath and count to 10 dude or you are gonna stroke out

Thank you bro! My pops and I just took mine off. My kid got frustrated, and broke the fulcrum on the inside. At least I know I took it off correctly!

Wow, that has been on my bucket list on my 2003. Simple and to the point👍👍👍

@Smalltechguy

4 жыл бұрын

well it looks like my screws are also missing so I shined a light just in case. My case still doesn't separate. I'm working the transmission at the same time so I may as well tackle them both.

@miketin745

Жыл бұрын

@@Smalltechguy My 2001 not neither was the name of the part I'd need to buy ?

@miketin745

Жыл бұрын

Someone told me it has something to do with my linkage

Thanks IT LOOKS IDENTICAL TO MY 1996GMC SEIRA 1500 PICKUP.. GOOD TO KNOW SAME PARTS.. GREAT DETAIL VIDEO GRACIAS...

Thanks for sharing bro...this jusst happened to my brother in laws truck he stock in the parking lot...

Thank you brother. You just save me several hundred bucks.

That was good informative thank you!

Excellent work.man I need to get a real mechanic to do this.

@misterx4088

11 ай бұрын

what are you afraid of?

Thanks a lot bro! Saved me alot of headache!! Appreciate it!

Thanks big time vid helped out big time on my 96 1500

Thanks Aaron.. Great job... do you have another video on how to replace the cable itself that goes down to the tranny?

Thanks man I will try this on mine

You know your stuff. Thank you.

Best video on this program Thanks

How did u determaine the loose lever wasnt the screw on the lever jus may hve been loose. jus seeing uf that is possible as a quick fix or do you hve to replace whole assembly??

Very informative video! Thank you!

@AaronHinesAuto

5 жыл бұрын

Thank you!

This just happened to my dads 00’ silverado. Shifter came loose or a cable let go. Seems to only go all the way to top, or all the way to the bottom. Gotta change the assembly tomorrow.

My high bean light comes on when the truck is off. I wonder if the the column for it is loose and causing a short to ground scenario.

My Silverado just did this so you got a subscription from

my gear shifter actually broke will that still work to replace that part and I can still use the same gear shifter

So i changed my cable and my shifter assembly and i cant get mine to shift correctly. When its in lark the indicator doesnt show its in park and i cant shift past drive into the lower gears. How doni fet it to shift correctly after putting the new parts on

Wanted to see the old one, to see why it's loose. Thanks

1999 Chevy Silverado 1500 LS AUTO 5.3L 3door cruise control extended cab.....I shifter is loose and I have to push the shift lever back towards the dashboard to pull out the key. I removed the shrouds and noticed there is a spring that has broken in half. Will replacing the spring fix the problem. or do I need to purchase the entire part you installed. I noticed that there was no spring on it. Appreciate any help. Thanks You Sir.

I have a 1996 Chevrolet and the gear shift selector is broke away from the column how do i replace it

My 05 Chevy has a orange wire hooked up to the gear shift, I’m assuming it’s for the tow feature. How do I go about getting that off

Good video informative to the point good job

Do you have something for a sierra 2012 same part the shift hand turn completely loose it's move free up dawn like is noting attach to it any help be appreciated

My 13’ has a sloppy shifter. Just replaced the shifter but still sloppy. I’m assuming I’ll have to replace some parts. Haven’t found anything OEM. Dorman sells lots of parts but I’ve heard they are garbage . Tips?

My gear shift is stuck in drive my truck will not start and the gear shift will only move up and down but will not shift into any other gear would that possibly be the gearshift gone out or something else

Mine is a 97 and it feels like it is not connected to anything to shifter shifts from top to bottom but it feels like it's not connected to anything could this is the problem?

Do you know if the same fix can be used for a shifter that is frozen?

yes the bottoms are t25

Great video and thanks for posting! It appears your shift cable is either out of adjustment or stretched. If you cannot shift down to #1, check your cable!!

@bobsaggot1428

Жыл бұрын

Mine doesn’t go down into first anymore. Do I just need to adjust it or do you think I need a new cable?

@thomasbartlett6771

Жыл бұрын

@@bobsaggot1428 If you drive the vehicle up on ramps or put it on a lift, simply use your hand on the tranny itself and click the tranny lever all the way to the right! This will put the transmission into 1st gear manually.

@bustakane

Жыл бұрын

@@bobsaggot1428don’t do what this guy is telling you just adjust your steering wheel to a different position (all the way up or down) then it goes into place

@misterx4088

11 ай бұрын

Yeah until it finally wears out or breaks. Need to fix, never wait for trouble.@@bustakane

@johnnyskinner22

5 ай бұрын

❤​@@bobsaggot1428

Thank, very helpful

I have a 2000 chevy my key doesn't turn nothing it was stuck on 2 managed it to go back to parking it does let me go all the way up but its still stuck on 2 I turned it off but its stuck won't even let me turn on my truck if anything please answer

So when it happened did it just slide past the gears and feel like they weren't there?

Well has it been a year already. Ok so now I'm thinking to replace this shifter. I had to pull the lock cylinder since the battery kept going dead only because the key could be removed while running.

So my transmission slipped a bit a couple times in OD. I put it in 3rd and kept rolling. The gear indicator light showed up in 1st tho, even tho i know the shifter and transmission were in 3rd. The tranny never left 3rd gear either when i came to a couple of stops. It took off still in 3rd. I left work knowing these things and went straight to 3rd. The tranny was then going thru 1st, 2nd, and 3rd. At one point when it downshifted the rpm and speedometer both dropped to 0 as i was still doing around 20 mph coming to a stop. When I took off things were normal again. My shifter has been loose for a while now. I'm hoping that this is the issue. I'm hoping that its just not accurately telling the transmission what to do. Is this a possibility?

so was your truck not falling into gear or when you hit a bump you could hear the shifter drop into place

So it's just the right side of mine that is broke. Can I just skip it on and off without taking all that off?

Exellent video 👍👍

Yes thank you great help

Thank you. I like that. Send me some more videos

Cannot get the lock for the shifter to release, that little wire harness, we've tried to lever it all kinds of ways with flathead and whatnot

Dorman 905-120 is the after market replacement part

I have a 2001 Chevy Silverado 4×4 that will go in reverse, neutral, n park but NOT in drive and other lower gears...... The transmission was rebuilt like 4.5-5 yrs ago n has less than 1,000 miles on transfer

Thanks for the video, very helpful

Does this work for a 07 Silverado Classic?

I have a 95 Silverado transmission shifts through all the gears fine but I can’t pull it into first gear on the Column if I replaced that part do you think that would solve my issue

@codeman6998

4 жыл бұрын

Might be the cable itself

I noticed when you were shifting through the gears both before and after the new part went in the truck in never went into first gear on the column, my truck won’t go into first gear on the column and I’m wondering why and don’t want to spend 140 bucks on the shifting mechanism if it’s not going to fix that problem ( the truck starts off in first gear and shifts through tall the gears fine)

@milesmalone5710

4 жыл бұрын

D L same here man, that’s why I’m watching this video. Did you ever find out what the issue was?

@dl6043

4 жыл бұрын

miles malone I haven’t if I do I’ll let you know

@ryanturntine8923

2 жыл бұрын

Anybody get an answer on the 1st gear column issue?

@tomwysocki6555

2 жыл бұрын

@@ryanturntine8923 try extending your cable linkage at the plastic threaded part where the two parts of the shifter cable connect. My son replaced his shifter cable and he had to adjust the length longer for it to go into 1st gear. Hope that helps.

@robertvaldez2990

Жыл бұрын

I replaced the shift mechanism twice thinking the first was defective because the gears were not catching right as well as it would not go into #1 low gear. Noticed the gear cuts on the new parts are not quite cut the same so I just remove the new spring and put it in my old shifter. Works excellent!!

Thank you

So that black cable that goes in the ignition cylinder is stuck bad. Tried multiple positions to get it out. Now I’ve busted some of the plastic and it still does not release. Ignition cylinder is stuck in on position. I threw a wrench across the street. That helped emotionally but the cable is still stuck. Any ideas? I hope I don’t have to pull the cylinder mount as that looks like it’s a steering wheel off situation.

@misterx4088

11 ай бұрын

Wrench Rage?

This may be a dumb question but why did you have to change it ? Was it not shifting ? Or just because it was loose ? Reason I'm asking is because my 01 GMC sierra sometimes won't catch the forward (drive) gear , so I put in reverse then back to drive then it catches.

@FT.jArtiss

2 жыл бұрын

I think tht is your issues because I've had the same issue it wouldn't move until I took the shifter loose

This is a common problem since it is made out of cast aluminum and sees a lot of use and abuse. ButI had a hard time getting the outer cover off of the top of the column. Mine doesn't simply lift off once I've removed the bottom screws. I have found them in the aftermarket arena, between 100 and $160, and used from $30 up to $80.

@TrailbreakersIntl

3 жыл бұрын

I agree, this video missed the 2 screws that come up from the bottom to hold the upper half of the cover. If you force it - thinking that it is a spring clip - it will break. Fortunately I was pulling off of a doner, so I wasn't overly worried about that.

@stevencox3661

2 жыл бұрын

He clearly said the screws on the bottom had previously been removed by someone else.

@misterx4088

11 ай бұрын

no you missed it@@TrailbreakersIntl

I tried removing the wiring harness (even with the brake down) but it appears to be stuck. Any ideas why this may be?

@tylerreed7991

5 жыл бұрын

J Santa heat gun

I have a question. The whole gear shift assembly fell off in my hands while trying to put the truck. What and how much needs to be replaced? 1997 cev silverado. One time we found similiar parts. Ended up with no horn and hard to shift. Where can we get parts(very limited budget). Prices etc,...???

Where do l get the part? And what is that thing called?

What happens when you put everything back together with a new one shifter mechanism and the truck doesn't want to engage the starter when trying to turn on the engine? What did i do wrong? Does my engine think its not in park?

@misterx4088

11 ай бұрын

...there's a loose nut behind the wheel.

So my 04 chevy Tahoe recently took a shifter shiter. She goes into park, neutral, and reverse but can't seem to find drive, 3, 2, or 1. The whole shifter feels loose too. Would this be the correct fix?

@bobcarter1153

3 жыл бұрын

Did you ever figure it out? I’m having the same problem

@ItsK.C.

3 жыл бұрын

@@bobcarter1153 I wound up having to replace the whole shifting cable. Somehow it internally stretched itself.

@toptierfish9335

2 жыл бұрын

@@ItsK.C. same mine did that it would do 3 only then only d and now I can’t even get it into drive

What is the part number to order from Chevy dealer?

Mine was not loose it broke at the bottom bolt and could not shift gears. 1999 Chevy Tahoe 4WD 5.7 Litre 306,458 miles on it : Hoorah ( orignal engine and have not been in it yet) Part number as of today is 905-101 and it seems Dorman is the only Manufacturer, that being said it doesnt matter who you buy it from ,AutoZone to NAPA all the same. But prices vary so shop around and not a normally stocked item, I was lucky Oriellys had one a little higher in price but THEY had it. Cost was $172.24 for part ,unfortunately my labor is not billable. LOL

@misterx4088

11 ай бұрын

...give yourself some cash back for being a loyal DIYer.

Everybody doing the shifter replacement don’t mention that it’s a good time to swap out your defective gauge cluster on GMT 800s while everything is apart here.

Anyone know what that rod on the passenger side is called/for mine wont stay hooked on so need to replace it but can't find out what it's called to find on parts sites

@orriepowell3557

3 жыл бұрын

Did you ever find out this part mine is same now it's throwing transmission codes

@Qballl

3 жыл бұрын

@@orriepowell3557 brake peddle safety switch

Just replace the broken spring… GM 7812853 cut it to 3/4”. Install 😉🤓

@misterx4088

11 ай бұрын

niceice

Thanks where is the link for parts no

I ordered the #7812853 spring, cut it at 7 rings, then fish out the broken spring and manipulate the new spring into place with 2 flathead screwdrivers.

@misterx4088

11 ай бұрын

are you a real-life McGiver?

@Mahkwa

11 ай бұрын

@@misterx4088 Yes, yes I am. I even used hand tools to turn a working car into scrap before.

@misterx4088

11 ай бұрын

I have the same skill set with home repairs@@Mahkwa

My truck shift with out pressing the brake. Started happening after I put a used steering column on it, any ideas why ?

@FranciscoMartinez-of3gr

3 жыл бұрын

It's the shift lock control solenoid

@FranciscoMartinez-of3gr

3 жыл бұрын

Also known as shifter interlock solenoid

I replaced this shifter with the Dorman 905-120 the shifter doesn't go into Low and the wheel lock cable won't engage. Iv got the 04 Silverado 4 speed automatic. Did I order the wrong part?

@AaronHinesAuto

3 жыл бұрын

No you ordered the correct part. You will need to adjust your shifter cable. The adjustment is below the cab near the transmission. The cable stretches overtime. The adjuster is located on the cable itself about 12 inches from the transmission it looks like a small box in the middle of the cable you will need to remove a small clip to be able to adjust the cable properly

@bser3973

3 жыл бұрын

@@AaronHinesAuto Ok Thanks for the information. I brought the truck in 2017 and didn't have any problems with that before. The last truck I had was a 87 chevy C10. Thanks again.

Does this loose shifter on my 98 GMC Yukon mean that I need to replace it with a new one? Please help with more information.

@AaronHinesAuto

5 жыл бұрын

yes! if the shifter moves around and has alot of play, it most likely needs to be replaced. if you have trouble getting the transmission into gear and it wont always to back into park, lift up the carpet around you feet/. check the shift cable under the drivers floormat area. they like to wear and stretch in that area.

Is this a fix if the shifter is not necessarily loose, but has like 2 shift points for drive?

@AaronHinesAuto

5 жыл бұрын

this fix is for excessive play in the shift lever. another common thing that can cause lossness and loss of gears is a worn and stretched sifter cable. it is a 2 piece cable that does have an adjustment under the cab in the drivers side of the transmission.

@jamieround2072

5 жыл бұрын

@@AaronHinesAuto i had loss of gears 321 & had to start it in ( N ) & also wouldn'y go back into park it never got past ( R )...... & i had to do that for days w/ the e-brake on..........lol is this mechanism here is it all china or all oem or what..........?? cus the gm dealer cost's 130 & yours here in the amazon site is only 66 buck's.... i wonder if i can find the same piece on rockauto.com & see what they charge...................

@shirylcapuluan5631

4 жыл бұрын

I nid to know d trailer shifter on foton loosen d nxt shiteng

I have a 2000 Chevy Silverado 1500 LS 5.3 new body and the shift control is not the same. The only difference is the cable connects into the ignition switch and hides behind it.The cable tip piece extends and that’s where I’m stuck..can’t figure out how to get behind the ignition switch housing.

@affiredog

Жыл бұрын

My 2001 cable will not go back in the ignition. WTF

@wilsonwichman4847

7 ай бұрын

Did you get it figured out

Do you have a part number for OEM? I have a 2006 Chevy 2500HD. Duramax

@AaronHinesAuto

5 жыл бұрын

yes sir! oem gm # 26092432

Theres like a white tube holding my cable on and wont release any ideas?

@DjSegwon

3 жыл бұрын

kzread.info/dash/bejne/l4yVuJSxhsqqgco.html

Thanks big dog

What does the wire harness control? Is it a neutral safety switch?

@nancyhendershott1998

11 ай бұрын

@misterx4088 well, the vehicle I had didn't have a digital display, and I didn't catch my typo of "does". Should have read, "what is* the wire harness control". My problem ended up being the starter, and then the transfer case blew. 🙄

@misterx4088

11 ай бұрын

my 01 Tahoe shift lever functions, but wiggly and loose, thinking that the spring mentioned by others might be broke. @@nancyhendershott1998

Just go get a .45 cent spring. Just did mine feels like new

@lulop022882

Жыл бұрын

Where did you find the spring at. Don’t wanna pay 15 dollars for a spring..

@robertspear9134

Жыл бұрын

Having this issue with my 05 Silverado. How difficult was it to replace the spring?

@votered1552

Жыл бұрын

@@lulop022882 any hardware store

@votered1552

Жыл бұрын

@@robertspear9134 very easy

@lulop022882

Жыл бұрын

@@votered1552 Would be the universal springs? Or spring for a particular application? Want to avoid having to take everything apart and then not being able to find the spring at the local Home Depot 🤣

Handy, dandy video. I will keep this info, for later.

I need to figure this out cuz I parked on a curb and now truck won’t go past n after driving for a while it used to be p r n d 3 but now I can’t get it past n to drive the damn thing 😅😩 Edit had to rip it down off the curb and broke it

Cool 😎 no problem thanks

What’s the part number? To order it.

I have 95 Chevy trk and when I put on revese it's moves about a foot and stops and won't move wat is my problem

@jimsnyder8712

4 жыл бұрын

Did u get a fix I'm having the same problem in my ss Silverado 2003

Ty

I just went thru this whole debacle. DO NOT buy the Dorman 95-101. It is JUNK. Sloppy and built to break. Within a week I had to replace it. Go with the OEM. The one he's replacing with here is part 26091246. You need to check your parts for compatibility though.

My shifter is loose, wont go into park, and if lucky, in reverse, could this be the same problem?

@DjSegwon

3 жыл бұрын

Check for fuse issues and transmission fluid levels!!

@FTEdmack

3 жыл бұрын

My 2003 2500HD was hard to get in park for a long time, then stopped going into reverse. The clip that holds the cable to the bracket on the frame by the transmission shifter was gone. Like a new shifter again!

What Year was this truck?

Mines not shifting right would this fix problem???

@AaronHinesAuto

4 жыл бұрын

No unfortunately this had to do with putting the transmission into gear.

I mean this is a nice video but, my shifter cable isn't loose but it is hard to move coming out of park into reverse every other gear is fine and I don't know why it's rough? Can someone help me on this?

@misterx4088

11 ай бұрын

go ask your wife for help

The bottoms are t25 btw guys

What is name off the part

03 to 04 is different, But almost the same

Darman part number 905-120

@chaillecoleman7760

3 жыл бұрын

will this work for an 07?

@DjSegwon

3 жыл бұрын

@@chaillecoleman7760 no

It “helpeth”😂 me alot