SILVERADO 5.3 GETS A 102MM INTAKE MANIFOLD & MORE!!
Ойын-сауық
Here my 2000 Chevy Silverado 5.3 LM7 gets a 102mm Intake Manifold installed as well as a Fuel pressure regulator with PTFE e85 hoses.
#Silverado #cammed #e85 #f150 #5.3 #4.8 #takuache #fordlightning #truck #trucks #mustang #lsswap #5.3 #4.8 #droppedtruck #slammed #silveradoss #chevy #chevorlet #ford #hemi #srt
Пікірлер: 252
I love that everytime you use silicone you say "for a little extra security" 😂😂 instead of what its actually doing which is sealing moisture out
@ErikRose_
Жыл бұрын
it just feels reassuring saying that ! 😂😂
Bro love the videos ! Love it brother cant wait to see the finish tune!!!!
@ErikRose_
Жыл бұрын
Really appreciate it bro! Lots more coming !
I just got this intake manifold off Amazon and want to say thank you for making this video because I was about ready to return it thinking I couldn't put it on my 05 Yukon Denali 6.0 which has electronic throttle body which making a cable drive won't be too difficult, now I know how to install this and I wasn't aware of the e85 sensor or the regulator I'll see if I can get those off Amazon as well
This is a dope build!
@ErikRose_
Жыл бұрын
thanks bro more coming soon!
Love your video !!
@ErikRose_
5 ай бұрын
Thank you!!
That was a good vid bro, subd
@ErikRose_
11 ай бұрын
We Appreciate the support bro 🙏, stayed tuned for future vids!!
I'd love to know the results of the swap. Great video
Nice video
@ErikRose_
Жыл бұрын
thank you ! 💪
For anyone installing new knock sensors in their vortec. Torque spec on them is only 10 ftlbs. Do not torque to 15 lol
Flush that brake fliud!
Intake looks so dope bro
@ErikRose_
10 ай бұрын
thank you bro 🫡
I’m almost done with my build bro last thing is what size was ur vaccum hose for your regulator and the size for your PCV line, and what was the little snap on thingy called
@ErikRose_
Жыл бұрын
We use 1/8 vacuum line but will probably switch to 3/16 because 1/8 was a little tight but still worked with some persuasion. As for the PCV line I think it was 3/8 line but would need to double check but almost sure that’s it. As for the snap on thing are talking about the e85 sensor or the fuel line fitting?
Can you slide the link for all the parts you used? Following your build I’m trying to get my 5.3 running on e85 already
@ErikRose_
Жыл бұрын
I gotchu bro full list for what i did on mine for e85! These are exact links of what I bought. Fuel Pressure Regulator : www.ebay.com/itm/293098256458?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VSwMTnaKQMa&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY E85 Fuel Pump : www.ebay.com/itm/184033790153?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YFsJgTc4R8q&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY E85 fuel filter: www.ebay.com/itm/353786252312?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ckmxfmmqtas&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY PTFE Fuel Line : EVIL ENERGY 6AN PTFE Fuel Line... www.amazon.com/dp/B07JFPXHB2?ref=ppx_pop_mob_ap_share E85 Flex Fuel Sensor: ACDelco 13577429 GM Original... www.amazon.com/dp/B01GQR9C5O?ref=ppx_pop_mob_ap_share E85 Sensor Connector: For GM E85 Flex Fuel Sensor... www.amazon.com/dp/B07115TSNK?ref=ppx_pop_mob_ap_share E85 Quick-Disconnect Female Push-On EFI Fitting : EVIL ENERGY 6AN Male to 3/8" SAE Quick-Disconnect Female Push-On EFI Fitting a.co/d/6y8j7sV And you’ll need AN6 fittings to connect all your PTFE hoses, that’ll differ depending on how you route your hoses. I got mine on Amazon as well. Thats Everything.
Whe you add that jegs intake. To you need to program anything on the truck. Or just install as normal
@ErikRose_
11 ай бұрын
no programming just a simple install 👌
I’m still stuck installing bro my last few things is how’d you do it with your EVapor canister and your EGR line tube, I’m having trouble with them I don’t know what to do with them
@ErikRose_
Жыл бұрын
Unfortunately, you can’t run those on this manifold. I just deleted them and having the tuner tune them out. There might be a way to do it but will require fabrication.
Awesome build bro ! I’m doing the same setup, what wire harness did you use ?
@ErikRose_
Жыл бұрын
yessir appreciate it my guy fr! 🔥🫡 harness for the injectors?
@steevennunez4801
Жыл бұрын
@@ErikRose_ for the motor, also injectors
U forgot to purchase the cathedral spacers it says it has to be pair with this intake in the description
Richard holdner makes 350 ish stock w just headers, he makes over 400 w cam only bout to upgrade my c10 5.3 swap
@ErikRose_
Жыл бұрын
Nice! yeah i think 5.3s are slept on they get the power down pretty good!
You took the time to clean the valley plate, should’ve painted it to protect it buddy 😮😅✌️
@ErikRose_
Жыл бұрын
Ehh gonna do another rebuild when I turbo it down the line ! 💪
@BlackandWhitecustoms
Жыл бұрын
how is paint gonna protect an aluminum piece? I could see if it was steel you can protect from rust but what value is it gonna have on aluminum besides cosmetic?
@jaydz7170
10 ай бұрын
Its been there all these years unpainted, it’ll be fine lmao
@BubbyPlaisan
10 ай бұрын
Shiiiii just finished a L87 Stroker from the block. 10 months! Ridiculous! And the cost so far? Almost 30. All my labor. All made in the US 6.8 liter. 1000HP
U could have just drilled holes lower on the original fuel rail bracket and cut excess off
did you delete the big ol emission pump or w.e that's on the left side of the engine bay ? link to the e85 sensor ?
@ErikRose_
Жыл бұрын
yessir deleted it and had my tuner tune it out! Heres the link to the sensor I got! ACDelco 13577429 GM Original Equipment Flex Fuel Sensor a.co/d/5qzyJVc
Badass video I just got this intake manifold and I'm getting ready to put it on my 05 Yukon Denali and I was about ready to return it until I seen this video so thank you where do I get to eat 85 sensor and where did you get the regulator my s***'s from Amazon
@ErikRose_
3 ай бұрын
Appreciate it brother, I got mine e85 sensor from eBay I think and got my fuel pressure regulator from eBay as well just a cheap one two but it’s been working great. And you don’t really need the e85 sensor unless you plan on running e85.
Yo bro did those adapter wires come with the injectors? If not where can i get some
@ErikRose_
Жыл бұрын
yessir! they come together most from the lsxceleration website come complete!
The stock intake manifold on these 4.8 5.3 proven to flow more hp and tq over eBay and Amazon fabricated intakes other than that your buddy done a good job doing the swap on your truck though
@ErikRose_
Жыл бұрын
Yeah i’ve heard 50/50 on these intakes I plan on boosting tho that’s why im sticking with this one! maybe a tbss later!
@plugBONE
5 ай бұрын
They put a square port intake on a cathedral port head 😂😂😂 nevermind that it’s cheap ebay crap, the intake to head flow is going to be turbulent AF 😂
@Tazerect
3 ай бұрын
@@plugBONEis it bad new here sorry lol
@Abraham_R_
3 ай бұрын
@@plugBONEthe o ring is rectangular but the port is cathedral….but still those sheet metal intakes are 🗑️ on N/A
@angelarreola5591
Ай бұрын
I would have gone with 6.2 intake manifold
What did you do with the MAP sensor? I see that you removed it but did you use the port on the back?
@ErikRose_
8 ай бұрын
Yes we were using the one in the back !
💯💪🏿
Ummm, Cathedral Port heads??
Badass build ! I got the same truck and I installed the same intake manifold, at what psi did you set the fuel pressure regulator?
@ErikRose_
Жыл бұрын
Appreciate my guy! I have mine set at 58 for idle that’s what I’ve heard is suggested, so far so good !
@urielzuany5097
Жыл бұрын
Thanks for the reply bro! Love the videos
@thekingofnoobs8362
Жыл бұрын
I hope this ain't a stupid question but do you need the e85 sensor I'm new too all this
@ErikRose_
Жыл бұрын
@@thekingofnoobs8362 not at all my guy! The sensor is only needed if you plan on tuning for the truck to accept both 91 pump gas and e85, if you tune the truck only on e85 the sensor is not needed!
@thekingofnoobs8362
Жыл бұрын
@ErikRose_ one more question what happens to the evap purge valve on top
Long shot but did you have a whistling noise coming from this intake? Is there any way to fix it? Thinking about going back to my original bc of this.
@ErikRose_
8 ай бұрын
Yes! These intakes are known to be loud! You can use Dynamat or something to quiet it down even just something on top of it helps, use your hand see how that changes the sound! 👌
Did you have any issues with the fuel rail mounts? I got this same intake for the 5.3 I built for my sons 85, running the multitech 2 injectors, I had to heavily modify the fuel rail brackets.
@ErikRose_
3 ай бұрын
Yeah, my mounts didn’t work with my injectors either had to make completely new ones..
I know the founder of AUS injection personally, awesome guy!
@ErikRose_
Жыл бұрын
Thats dope bro! These injectors are great! Tell him to keep doing his thing.
Badass bro planning on doing same thing do you have the link for the injectors ?if so can u send it plz
@ErikRose_
10 ай бұрын
Hell yeah get it done my boy, I gotchu with the link! www.lsxceleration.com/delphi-35lb-hr-ls3-ls7-fuel-injectors-d56010-320-8-0/
Did you take motor out to put cam in , I’m ls swapping and eventually I plan on putting some power to it .
@ErikRose_
Жыл бұрын
No i actually made a video on putting in the cam if you want to check it out !
@vaughns_world3752
Жыл бұрын
@@ErikRose_ will do
What's up bud love the truck was wondering if u could let me know the part number of the injector kit u bought
@ErikRose_
Жыл бұрын
Thanks man, Appreciate the support. No problem I’m sure it was these. www.lsxceleration.com/delphi-35lb-hr-2000-07-ls-truck-injectors-56010-320-8-d/
@terryweaver2562
Жыл бұрын
Thanks a bunch bud
Where did you get the 180 for the fuel rails?
@ErikRose_
Жыл бұрын
you can get them on amazon bro ! An6 180 !
What did you do with the front coolant pressure line that runs to the oem intake? Was that line blocked off??
@ErikRose_
29 күн бұрын
The steam port that goes through the throttle body?
Excuse me, sir where did you put the map sensor after all?
@Kloco78
25 күн бұрын
Never mind, I see it thanks
whats the electronic sensor looking doo dad on the line in to the pressure regulator?
@ErikRose_
Жыл бұрын
that sir is an E85 flex fuel sensor, not required for the fuel pressure regulator just something I added for tuning later.
@sunzoo7173
Жыл бұрын
@@ErikRose_ thanks!
@moycorral7870
Жыл бұрын
So what do you use in place for the e-85 sensor if you’re not going e-85 yet?
@sunzoo7173
Жыл бұрын
@@moycorral7870 probably just run the line as you would but without the sensor
Dude talking like he’s doing the work while watching someone do literally everything for him🤣🤣
U speak spanish my guy 😂👍
No gasket befor the manefold is Crazy
@ErikRose_
3 ай бұрын
Gaskets are installed on the intake they are like o-rings
Where’d you get those front rims at
@ErikRose_
Жыл бұрын
I actually got them off some guy from offer up lol
Do you have the linke for that intake manifold
@ErikRose_
11 ай бұрын
Yessir! Heres the link to the one I got bro! Top10 Racing Intake Manifold with Fuel rail fit 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black a.co/d/19sIHZz
Do the stock injectors work I heard that they are to short to run
@ErikRose_
10 ай бұрын
I honestly couldn’t tell you, we went right into some aftermarket injectors. They looked similar in size though, but I would need to double check.
link for the fuel regulator
Is that the dude from LC Performance then went to Limi713SS ?
@ErikRose_
7 ай бұрын
Nahh lol, that’s my brother 😂. They’re in Texas we’re in California..
I got a stock 5.3 wtf should I do to add more Power
@ErikRose_
Жыл бұрын
Everything that i’ve done to my truck has been for power increases, Stage 2 Cam, Intake manifold, E85, and theres lots of other things you can do!
What fuel pressure regulator did you use?
@ErikRose_
Жыл бұрын
An ebay one for the time being! So far its working great! Heres the link for the one I got! www.ebay.com/itm/293098256458?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VSwMTnaKQMa&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY
Como se llama el kit del regulador de presión ?
@ErikRose_
Жыл бұрын
Se llama AN6 Fuel Pressure Regulator lo compre en el ebay y hala bien aqui esta el link www.ebay.com/itm/293098256458?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VSwMTnaKQMa&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY
Did you mount square port to cathedral head with no adapter?
@ErikRose_
Жыл бұрын
My kit came with the gaskets that give the ports a good seal ! so you can either of the two adapter or gaskets.
@fmrperformance7774
Жыл бұрын
@@ErikRose_ I just spent $217 on adapter. Gonna return it now
@fmrperformance7774
Жыл бұрын
@@ErikRose_ I have same seals.
@ErikRose_
Жыл бұрын
@@fmrperformance7774 what manifold do you have?
@fmrperformance7774
Жыл бұрын
@Erik Rose chrome version of yours.
Csn you drop link to fuel injectors
@ErikRose_
10 ай бұрын
yes gotchu bro! www.lsxceleration.com/delphi-35lb-hr-ls3-ls7-fuel-injectors-d56010-320-8-0/
Where did you get the E-85
@ErikRose_
Жыл бұрын
Here in LA bro we got E85 everywhere but I get mine from a Chevron
The knock sensor harness was plugged in the wrong sensors
@ErikRose_
5 ай бұрын
They are tuned out anyways lol
Can I put this intake on a stock engine to just make more horsepower no turbo or nitrous stock cam
@ErikRose_
19 күн бұрын
You won’t really get much gains from this intake it’s better suited for boost applications.
Did u get factory or aftermarket fuel injectors?
@ErikRose_
7 ай бұрын
Yessir! 35lbs AUS injectors
@shaquanshelf5484
7 ай бұрын
@ErikRose_ ok I didn't know if I could use factory or I had to go aftermarket thank for the help
What wheels you got at the front??
@ErikRose_
Жыл бұрын
I think they’re pro comp wheels, they’re 17inch and used for 4x4 builds but i only used them to clear the lowering spindles !
Where did you get the throttle body from?? Can you send the link?
@ErikRose_
Жыл бұрын
Yessir I gotchu! This the exact one I bought! LineRacing 102MM Throttle Body for Chevy GM Gen III LS1 LS2 LS3 LS6 LS7 SX LS LSX 4 CNC Bolt (Black, 102mm) a.co/d/7meQJD3
@robertchalk8193
Жыл бұрын
@@ErikRose_ thanks appreciate it
@robertchalk8193
Жыл бұрын
@@ErikRose_ do you have the link to that intake....
@ErikRose_
Жыл бұрын
@@robertchalk8193 yessir there you go! Top10 Racing Intake Manifold with Fuel rail fit 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black a.co/d/iFRc10U
can this intake fit a 5.3 ecotec 2016 silverado?
@ErikRose_
Жыл бұрын
the exact one i put no but i know they make one for ur engine as well! Similar but slightly different!
@vkchikom3187
Жыл бұрын
@@ErikRose_ but do you know where i can find it i was looking around 400-500$ ones
You made your truck slower, congrats. 😂
@ErikRose_
10 ай бұрын
It has a trailblazer ss manifold now! 👌
@Leo_bruhh
9 ай бұрын
Does it really make it slower?
@matt6951
9 ай бұрын
@@Leo_bruhh fuck yes Absolutely.
How did you install the map bro?
@ErikRose_
Жыл бұрын
Put it on the back of the intake manifold connected to a hose that goes underneath the manifold
All this comes with the kit or you have to buy separately?
@ErikRose_
4 ай бұрын
It comes with intake manifold, fuel rails, brackets, and fuel line to the rails with fittings.
What kind of injectors are you running ?
@ErikRose_
11 ай бұрын
AUS Injectors 35lbs 👌
What quick-connect’s did you get? Are they the same size or different?
@ErikRose_
Жыл бұрын
Here the link to the quick connect i used! and yes same size! EVIL ENERGY 6AN Male to 3/8" SAE Quick-Disconnect Female Push-On EFI Fitting a.co/d/7iZegC7
@moycorral7870
Жыл бұрын
@@ErikRose_ thanks bro appreciate it going somewhat same way on a build of mine
Badass informative video bro! How’d you run the throttle cables?
@ErikRose_
Жыл бұрын
I made a custom bracket that bolted right onto the throttle body, but they do also sell ones that fit those throttle bodies too perfectly!
@daniellozano289
Жыл бұрын
@@ErikRose_ appreciate the reply! I’ll see if I can find one, did you see them on Amazon or a specific website/brand?
@ErikRose_
Жыл бұрын
@@daniellozano289 Here’s one on Amazon! I think they have the same one on ebay too! Woopeey 4-Bolt Throttle Cable Bracket for LS LSX LS1 LS2 LS3 LS6 LS7 Intake 92mm to 102mm a.co/d/299loBU
What size is the brake booster line
@ErikRose_
4 ай бұрын
I think it was 1/2 inch but not completely sure.
How did you put a 102 ? Rectangular ported on a triangle port head???
@justinw523
Жыл бұрын
I noticed that too LOL it’s possible cause the square ports on the intake is larger than the cathedral ports on the cylinder heads making it able to work but there’s a big problem in doing this as it could cause a lot of turbulence but I think some have done it without any problems but using cheap eBay or Amazon fabricated intakes I don’t think anybody knows if it effects the turbulence and choke the cylinder heads or not
@JretnuH
Жыл бұрын
@@justinw523 port the head
@dizzelfunk3364
Жыл бұрын
This is where I'm stuck at the cathedral ported heads and the rectangular intake......does it work or what
Where’d you get your fuel pressure regulator bro?
@ErikRose_
Жыл бұрын
Its just a basic ebay one bro for $50 ! haven’t had any issues with it so far !
@geraldr9562
Жыл бұрын
@@ErikRose_ could you link it bro, I’ve been tryna find it for a min your video has helped me throughout my installation too💯
@ErikRose_
Жыл бұрын
@@geraldr9562 yessir i gotchu bro ! this the exact one i got www.ebay.com/itm/293098256458?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VSwMTnaKQMa&sssrc=2349624&ssuid=&widget_ver=artemis&media=COPY
Bracket was to tall cause it's designed to have the spacers for the manifold like it says on the listing on Amazon
Que mas necesitastes para que funcione con e85 y la regular
@jorgecardenaschavez9726
7 ай бұрын
Y si no la quiero aser e85 tambien tengo que poner el presurer regulador
@ErikRose_
7 ай бұрын
Para ser el e85 ocupas las líneas de ptfe, la pompa para e85 y el filtro de gas que acepta e85. Solamente se ocupa el regulador si le cambias los injectores
Did you delete the purge valve?
@ErikRose_
Жыл бұрын
Yes it is deleted
Are you going to do any of the work or watch him do it all
@ErikRose_
6 ай бұрын
someones gotta film right? 🤣
So what’s the back holes for on the intake
@ErikRose_
Жыл бұрын
I think it is for the map sensor but mine didn’t fit with my style. But might fit with the newer style with o-ring, but either way I didn’t need it just left it the plug in.
@LujanRacing
Жыл бұрын
@@ErikRose_ ah ok thanks bro just doing lots of research on this intake rn
@mannyescamilla3372
Жыл бұрын
You can buy the ls3 map sensor, with the converter wire to plug in
Is your motor ported or anything? Can you just bolt this on on a stop block ?
@ErikRose_
Жыл бұрын
Motor is completely stock ! You can no problem !
Will this work on a vortec 5.3?
@ErikRose_
8 ай бұрын
mine is a 5.3 !
can u put it on without a tune or anything?
@ErikRose_
4 ай бұрын
Yeah should be fine.
where did you get the intake from
@ErikRose_
10 ай бұрын
From amazon bro! link should be somewhere in the comments lol
@ThatLSTahoe
10 ай бұрын
@@ErikRose_ thx Bro
What heads do u have on ur 5.3 ?
@ErikRose_
3 ай бұрын
864 heads
You don’t have to teach us if your not experienced 😂😂 cool build video! We don’t need pointers lmao
@ErikRose_
Жыл бұрын
hey some need it ! 😂
@rrwe22
9 ай бұрын
@@ErikRose_most definitely keep doing your thing
how u delete egr system?
@ErikRose_
10 ай бұрын
Just disconnected all the lines and left a few hanging, tuner did the rest of the work!
On my 01 it’s drive my wire not cable
@ErikRose_
Жыл бұрын
fr thats weird i thought they came like that in the newer ones! the cat eyes!
Did the throttle cable give you issues?
@ErikRose_
3 ай бұрын
Just had to get a new bracket to make it functional.
@slicksloth_416
3 ай бұрын
@@ErikRose_ do you have the link of which bracket you used
Bro efan conversion
@ErikRose_
7 ай бұрын
I got it now lol
Where can I get the map sensor ?
@ErikRose_
Жыл бұрын
it comes off your oem intake manifold!
@clouthunterz781
Жыл бұрын
@@ErikRose_ thanks bro how is the 102 mm intake holding up specs ??
@ErikRose_
Жыл бұрын
@@clouthunterz781 its great so far, no issues only thing with these style manifold is that they are kind of loud but nothing crazy !
How tall is that intake
@ErikRose_
10 ай бұрын
its a tall runner style manifold !
Can you hit me with the link for that manifold and fuel rail?
@ErikRose_
Жыл бұрын
I gotchu! it comes complete as a kit, this is the exact one I ordered! www.amazon.com/Top10-Manifold-Throttle-Fabricated-Chevrolet/dp/B08Q3NWZ31/ref=asc_df_B08Q3NWZ31/?tag=hyprod-20&linkCode=df0&hvadid=516555722597&hvpos=&hvnetw=g&hvrand=7292159453427035406&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9031251&hvtargid=pla-1267429406765&psc=1
Did it affect you negatively
@ErikRose_
3 ай бұрын
nah no major differences really
If i was upgrading the intake, i would modify the harness, too,, looks ugly on top of it
@ErikRose_
Жыл бұрын
It could actually go under the intake you just have to put it under before you install the intake we forgot so we just left it lol
@gerardolopez5875
Жыл бұрын
@@ErikRose_ @ ok, yes underneath the intake , was s a good idea!! Looks good anyway 👍👍
Where did you get your e85 kit bro?
@ErikRose_
Ай бұрын
I got the e85 sensor off of Amazon and the regulator as well.
@nbsjoebuilds2037
Ай бұрын
Thanks bro is it universal or for Silverado?
@ErikRose_
Ай бұрын
Yes basically universal, you just need the get the pigtails and wire it into you computer and then get it tuned for the mix. You also need the necessary fittings to connect to your fuel lines. I think this is the one I have on mine if I remember correctly. ACDelco GM Original Equipment 13507128 Flex Fuel Sensor
We’re did you place the map sensor?
@ErikRose_
Ай бұрын
You run a vacuum line from the smallest nipple under the manifold to the map sensor.
@Rico-co1sy
Ай бұрын
@@ErikRose_ did you mount it somewhere or did you leave it hanging ? Currently in this situation 😅
@ErikRose_
Ай бұрын
I just left it hanging under the manifold haha. But you could mount it if you want to.
@Rico-co1sy
Ай бұрын
@@ErikRose_ naw am doing the same thing haha 😂 I just needed to ask 😅to make sure am not the only one haha 😂
@ErikRose_
Ай бұрын
Haha 😂 go for it then. Just extra work that’s not necessary lol.
Nice ! If you dont mind Bro can i get all the Links
@ErikRose_
Жыл бұрын
I gotchu bro full list for what i did on mine for e85! These are exact links of what I bought. Fuel Pressure Regulator : www.ebay.com/itm/293098256458?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VSwMTnaKQMa&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY E85 Fuel Pump : www.ebay.com/itm/184033790153?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YFsJgTc4R8q&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY E85 fuel filter: www.ebay.com/itm/353786252312?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ckmxfmmqtas&sssrc=2349624&ssuid=nCH1hP3qSsK&var=&widget_ver=artemis&media=COPY PTFE Fuel Line : EVIL ENERGY 6AN PTFE Fuel Line... www.amazon.com/dp/B07JFPXHB2?ref=ppx_pop_mob_ap_share E85 Flex Fuel Sensor: ACDelco 13577429 GM Original... www.amazon.com/dp/B01GQR9C5O?ref=ppx_pop_mob_ap_share E85 Sensor Connector: For GM E85 Flex Fuel Sensor... www.amazon.com/dp/B07115TSNK?ref=ppx_pop_mob_ap_share E85 Quick-Disconnect Female Push-On EFI Fitting : EVIL ENERGY 6AN Male to 3/8" SAE Quick-Disconnect Female Push-On EFI Fitting a.co/d/6y8j7sV And you’ll need AN6 fittings to connect all your PTFE hoses, that’ll differ depending on how you route your hoses. I got mine on Amazon as well. Thats Everything.
@1sixkobstahoe138
Жыл бұрын
@@ErikRose_ Thank You Bro Going This Route for my 4.8 Should be good Right
@ErikRose_
Жыл бұрын
@@1sixkobstahoe138 yessir 4.8 should be pretty much the same !
@1sixkobstahoe138
Жыл бұрын
@@ErikRose_ Bet Thanks Bro , What about if i just want to install the intake manifold for now will it be just plug nd play bro ? Thanks for your time 💪🏽
Would this fit the 4.8?
@ErikRose_
Жыл бұрын
yup its the same thing! well you’ll have to modify it a little like i did lol
Hey u MFs! Give me some gotos to beef up a 10L-80E. On a 20 Silverado. 1000HP. Got the Torque C. Give me some magic
@ErikRose_
10 ай бұрын
I’ve heard those 10L-80s hold great power! Definitely would recommend increasing the clutch count for over 1k hp! Sick build 🔥🔥🔥
Can you use the stock injectors ?
@ErikRose_
Жыл бұрын
for that manifold? yes you can !
Your injectors didn’t leak ?
@ErikRose_
Жыл бұрын
Nah no leaks !
@GbodySS_LsX
Жыл бұрын
What about the ports to the rectangle to cathedral
@ErikRose_
Жыл бұрын
@@GbodySS_LsX no issues as well ! but i do know they make a cathedral port style for this manifold if you want that !
@GbodySS_LsX
Жыл бұрын
I already have it mounted just having fuel rail issues with my alternator but I bought fittings
@ErikRose_
Жыл бұрын
@@GbodySS_LsX is not clearing or hitting the alternator? Because I know they make 2 different styles of the Manifold, a short runner and a long runner, mine is a long runner and clears with out issue!
Bro can u shoot mw a msg. I wanna ask u a few questions
@ErikRose_
Жыл бұрын
wassup bro !?
I need your freind haha how much$?
@ErikRose_
9 ай бұрын
he’s my brother 😂
Electric fan bro electric fan
@ErikRose_
26 күн бұрын
Just did electric fans not to long ago.
I'm😢😢😢😅😮😅
junk intake and tb. u lost alot of hp with that
@ErikRose_
4 ай бұрын
Have a Tbss now, and I’m boosting it.
Shouldve at least went with shortys my guy 😁
@ErikRose_
Жыл бұрын
I think i might go with long tube in the future i heard the gains are pretty significant !