silverado 1999-2007 manual windows and locks to power windows and locks using factory 99-01 parts
parts you will need are door panels, switches, door harnesses,regulators,and door latches. all parts must be from a 1999 to 2001. later years wont work without a bcm. only non factory parts is the keyless entry and relays.
keyless entry
amzn.to/2VmooCG
relays
amzn.to/2X2JLtE
driver door lock actuator
amzn.to/3ngRTl7
passanger door lock actuator
amzn.to/3nashpP
driver window motor
amzn.to/3tom4rt
passanger window motor
amzn.to/2WV7GLH
Пікірлер: 128
Love your work. Your truck is sweeeeeet. You do great work. Wish my 2000 looked that good.
@BuiltByMike
2 жыл бұрын
Thank you
great job, I'm doing it the same way!
Gonna give this a go tonight. Also, who makes those wheels? They look pretty dope
@BuiltByMike
2 жыл бұрын
Asanti
I have watched your video several times, and read through your comments. I’ve viewed you links into the parts, and would appreciate if you could clear a few things up for me. On some of your parts links, they cross reference through 2006. What exactly is different in the later trucks. Just the harness? or is it the switches themselves that has to be an earlier year? Thanks for any advise, I have an 05 and just purchased 4 doors off the same year. I’m hoping to still be able to do this swap with the majority of what I just bought.
@BuiltByMike
2 жыл бұрын
Harness, switches and door panels must be from earlier years. The regulator and door lock actuators are probably the same. 02 and up use the bcm to control the doors and they require programing which I heard is a mission.
@rhec_man2177
2 ай бұрын
@BuiltByMike could you swap bcms with a truck that has power windows and locks?
2002 should fall into the same category to. I'm do this swap also on my'02 ext.cab. I actually ran into the same issue with the passenger door power wire. Glad i found your video. coincidentally I'm doing it the exact same way also. I am using 2002 Tahoe denali switch's with the wood grain bezel. I grabbed the dash bezel also. looks pretty slick. Any other tips??
@BuiltByMike
2 жыл бұрын
2002 might be a half year. As long as you grab the right ones you should be good.
@cmx1106
Жыл бұрын
You have any pictures of the wood grain?
How can I do this on my 2002 Silverado?
where’d you get the wiring diagram from? Looking to attempt this
@BuiltByMike
3 жыл бұрын
Alldatadiy.com
Nice video I've got the windows sorted out any chance you could explain more how you did the locks?
@BuiltByMike
10 ай бұрын
I have another video I just did on my other truck that explains it better. Look at my channel
@sotct
10 ай бұрын
@@BuiltByMike will check it out thank you sir
Do you have a video showing the mirrors working on power?
@BuiltByMike
Ай бұрын
Mirrors are manual. Making a harness for the mirrors is alittle more involved
Is that 06-07 lbz? If so I have the exact same truck mines a 06 Duramax regular cab 4x4 white manual everything. I got some clean 02 door panels and switches. I’m gonna start doing the power window conversion once I gather all the parts I need
@BuiltByMike
2 жыл бұрын
Yup its an 06
Good stuff. I have an 06 work truck and bought some doors off a 2000. I labelled each wire by toning it but my problem is finding out whats what on my truck. Where did you get the diagram? Can you take some close ups?
@BuiltByMike
5 ай бұрын
You need to feed the doors power and ground and make a cross harness to the other door
How much did this cost and is everything still going strong? I got an 05 and been looking into this.
@BuiltByMike
2 жыл бұрын
I have about 500 to 600 in it. The door panels and interior being most of it. I think I paid 300 or 400 for the full grey interior. Bought everything else new on Amazon.
Are those 99-2001 switches? If so do they fit on 03-07 door panels?
@BuiltByMike
Жыл бұрын
You need 99 to 01 stuff.
Did you have to add relays for windows or just add power to both sides on green wire?
@BuiltByMike
3 жыл бұрын
Just power. Relays are in the switches
@silverado4u2nv
2 жыл бұрын
I got the switches working at each door for the windows windows… but I can’t get the passenger window to go down or up with driver side switch
I have everything else done. I just need to know how to wire the locks up. I can’t find any other videos on KZread using factory harness and switches
@BuiltByMike
2 жыл бұрын
You need a wiring diagram from your donor and Google 2 relay power lock relay wiring
@garzagarza5461
2 жыл бұрын
@@BuiltByMike but should it be a positive or negative trigger to activate the relays
Would you mind going over your wheels set up and where you got them from?
@BuiltByMike
Жыл бұрын
Those were asanti 22x10 I think I got them off ebay.
@derellcaldwell8653
Жыл бұрын
Thanks bro
What were the wires you used from the switch to the locks
@BuiltByMike
2 жыл бұрын
You need to look up a wiring diagram from your donor truck
So if my trucks a 2000 I can take doors off of a power window and lock 2000 and swap them without having to do all of the wiring ?
@BuiltByMike
2 жыл бұрын
You need to do all the wiring
Where are you located?
used the same 12v power supply off the distribution block under the driver side and it burnt up, any other recommendations
@BuiltByMike
4 күн бұрын
There was a couple of them down there if I remember correctly
Do you need to change the speaker wire even tho were running them thru amp and not stereo
@BuiltByMike
6 ай бұрын
If your running a amp I would upgrade the speaker wire
My truck is an 2000 so I got a bcm for a 03 so can I just get the doors then ? With power locks and windows
@BuiltByMike
2 жыл бұрын
You don't want a bcm. Programing is a nightmare. That's why you want pre 02 stuff
we need to know the colors for the driver side. what’s the colors for switches and motor
@BuiltByMike
2 жыл бұрын
You need to look up the wiring from your donor as they can be slightly different
Can you give me break down of everything I need to do the swap besides the door panels and switches?
@BuiltByMike
Жыл бұрын
Wiring harness in the doors. Regulator and lock actuators I bought new.
@trebam3
Жыл бұрын
@@BuiltByMike thanks bro
I have a 2003 regular cab work truck, if I grab power windows off a 99-02 , this will work for me?
@BuiltByMike
Жыл бұрын
Yes
Do you have lights on both switches
@BuiltByMike
3 жыл бұрын
No
I’m working on a 01 Silverado single cab. I need the wire diagram to the master switch. Please help
@BuiltByMike
Жыл бұрын
Best thing is go to all data diy. Com and pay the 20 for your truck or the donor
Can I use 02 4.3 wiring diagram?
@BuiltByMike
2 жыл бұрын
As long as it has power windows
Do you have the link to the wiring diagrams
@BuiltByMike
2 жыл бұрын
No need to go through alldatadiy
So I order for this to work like this the door panels and switches need to be from a 99-01 ? I have a 2005 I want to do this
@rubenelmeromerogarza8186
2 жыл бұрын
I bought 2 doors from a 06 suburban comes with everything, I’m guessing that won’t work
@BuiltByMike
2 жыл бұрын
Nope. After 02 everything runs through the bcm and its a pain
@jamespalmore6624
2 жыл бұрын
@@rubenelmeromerogarza8186 yes it will I bought two doors of a crew cab. You need swap bcm no relays. You can use 06 door panels
You know anywhere online I can get the harnesses for the project besides a donor?
@BuiltByMike
2 жыл бұрын
Check on ebay. Make sure it's a 02 or older
@alekctb
2 жыл бұрын
I got wiring harnesses and door panels and switches from 02 Silverado, now to find my wiring diagrams I tried all data, any place you recommend I can find how to wire it up I have a 99 Silverado single cab
@alekctb
2 жыл бұрын
@@BuiltByMike ^^
@BuiltByMike
2 жыл бұрын
@@alekctb I use all data diy or something like that. It's like 20 for a year. Get the wiring diagram for both and then find out what you need to add.
Would this work on a 06 Silverado 1500
@BuiltByMike
3 жыл бұрын
This is a 06 . You need 99 to 02 parts
I got a 2007 classic truck. What year model would I have to get? Could I get all junkyard parts if I could find them? Would my wiring in my truck work?
@BuiltByMike
3 жыл бұрын
You have to wire everything. You need to find parts from a 99to 02. 03 and up won't work as they require a bcm
I got a 2004 Chevy 1500 single cab and I have manual windows how would it work like I need to buy whole new doors that were already electric windows or whag I’m confused I need help
@BuiltByMike
2 жыл бұрын
Doors are the same you need door harnesses from a pre 02 truck and I have included links for the window motors and soor locks. Then you'll need to wire in a keyless door lock and wire the windows
@hobojojotv8845
2 жыл бұрын
@@BuiltByMike so you don’t need the same type of door as in the video ? As long as you have the harness?
@jamespalmore6624
2 жыл бұрын
3d's Auto Advise & tips.... He shows you step by step real easy. Don't need all this crap....
What did you do to your dashboard it looks sick
@BuiltByMike
2 жыл бұрын
It's called flock
I can't get my driver switch to send 12V to the lt blue / tan wires for the pass window. Any suggestions?
@BuiltByMike
Жыл бұрын
Driver window works?
@guitarguy3221
Жыл бұрын
@@BuiltByMike I figured it out with the wiring diagram. My ground terminal G driver side needed a better ground. I was testing using 2 dewalt batteries lol
How you get the 2015 seat on ?
@BuiltByMike
2 жыл бұрын
Cut the existing bracket to fit
Can you break down the door lock steps
@BuiltByMike
3 жыл бұрын
Google 2 relay power door locks
Do you have a remote start on this truck, or did you wire the security system directly to the lock actuators
@BuiltByMike
2 жыл бұрын
Directly to dock locks. No remote start.
Could a Yukon 99-02 door work with my Chevy 06 1500 ?
@BuiltByMike
5 ай бұрын
If your truck is manual yes. You need the older stuff. 03 and up can't work without the bcm.
Would you make a harness for $300
Can i do this to my cadillac escalade 2000
@BuiltByMike
Жыл бұрын
Should already have power windows and locks
Hello do you have a wiring diagram
@BuiltByMike
10 ай бұрын
Check out my newer video on my other truck I go over the wiring better.
Does the aftermarket alarm work like a normal alarm? Can i do the swap and then have somebody install an alarm system? Or will the wiring be diffrent since it didnt come from the factory with power locks?
@BuiltByMike
9 ай бұрын
Wiring has to go through the keyless module. Heck out my other video of my red truck. I explain the wiring better.
what wheels are those
@BuiltByMike
2 жыл бұрын
Asanti
where are you from i have a chevi 03 if i could put them
@BuiltByMike
2 жыл бұрын
You need pre 02 parts as 03 and up goes through the bcm
@elpolloandrade3164
2 жыл бұрын
where are you located mela could you be?
What wheels are those?
@BuiltByMike
19 күн бұрын
Honestly can't remember
@TheBuiltCmax.Creations
19 күн бұрын
@@BuiltByMike gotcha, they’re a clean design
Man im struggling rn on trying to do this . I want to do it the way you did it but I'm in need of help.
@BuiltByMike
3 жыл бұрын
You have to understand how to read a wiring diagram. Then just a matter of running power and ground and running the wires from the drivers to the passenger side
You bought all the parts from the dealer
@BuiltByMike
3 жыл бұрын
I only bought the lock actuators and regulators new from rock auto
Would you make the harness for me if I paid you
@BuiltByMike
2 жыл бұрын
It's very time consuming. Wouldn't be cost effective
How much would u charge me to do this?
@BuiltByMike
2 жыл бұрын
It won't be cost effective. It's about 8 hours of work to do it nice
@lm7manialcorcha44
2 жыл бұрын
Where are you located?
@BuiltByMike
2 жыл бұрын
Punta gorda
I need the reverse. Power window to manual. Putting new doors on the old truck
@BuiltByMike
2 жыл бұрын
All you need to use is all the manual window regulator and just abandon the wires
This is the worst Explanation ever!
Have a 2004 manual doors and bought 2 auto power windows w/locks doors complete. Will the wiring harness just plug and play?
@BuiltByMike
2 жыл бұрын
No. You can't use post 02 parts
@billy2423
2 жыл бұрын
@@BuiltByMike Doors i bought are off a 2004 also
@BuiltByMike
2 жыл бұрын
It's much harder to make work with the bcms and door modules. That's why you use the older trucks
@jamespalmore6624
2 жыл бұрын
You just need bcm the orange one ext cab....
@billy2423
2 жыл бұрын
@@jamespalmore6624 WHAT'S the link to 3d's auto. Never mind i found it. The bcm would need programed?