Sightmark Wraith Infrared IR light 18650 Battery Modification
In this video I am going to show you how to disassemble the IR light that comes with the Sightmark Wraith 2X and 4X.
Жүктеу.....
Пікірлер: 50
@doomfathertm87713 жыл бұрын
drill what out? it never explained it
@kellyash45
Жыл бұрын
The inside of the battery tube.....it's pretty self explanatory really, lol
@gerthbrooks3346
Жыл бұрын
no its not very self explanatory
@doddles2k103 жыл бұрын
Just but the 16650 lithium batteries they fit it perfectly . Saves a lot of messing around and potentially damaging the I.R.
@peteduncan921
2 жыл бұрын
I've been using a 16650 in mine and it seems to work fine. The 18650 may be easier to get and last longer, but they are both 3.7-volt lithium batteries. I can't see myself trying to drill out that tube to accept the larger battery.
@mightyfortress65959 ай бұрын
you forgot to tell us "HOW TO" and what are we "DRILLING OUT"?
@mathewdavis-adventuresandd66437 ай бұрын
"Do your drilling and put it back together." ????? Did I miss something? What exactly am I supposed to drill? It's a great video on how to disassemble the light, but I'm failing to see how you are modifying the light to hold a different battery.
@EastTexasOutlaws3 жыл бұрын
Awesome, would have been good to know a few months ago. Thanks for sharing, it'll save people a lot of money.
@nicsu2128 Жыл бұрын
I’m guessing this is a joke video, where someone gives you a bunch of nuisance tasks and leaves out the final most important step.
@kellyash45
Жыл бұрын
If you don't understand he left out one thing, which is the 3/4" drill bit size to ream the inside diameter of the battery tube because the OD of the batteries is different, and you think the rest is "nuisance tasks", you REALLY should be taking your shit to a professional gunsmith and not relying on your faulty sense of mechanical aptitude. You're going to put your eye out one day 😆
@johneratcliff2 жыл бұрын
Drilling...could you please explain?
@reiserx Жыл бұрын
It would be a great idea if the battery voltages were the same but it seems like a bad idea to lower the output by 40% with over 2 volts less to the light.
@simulatedzero
Жыл бұрын
Not really the case normally. And even if it was, it wouldn't be different for very long due to the voltage sag on CR123s. 18650 have a significant advantage in energy density and maintaining energy output. That's if the IR emitter is direct drive. Being that the light has modes, it's most likely a 3v emitter on a buck converter. In which case, you're not going to lose any light output at all and gain a huge advantage in runtime.
@splicezone2 жыл бұрын
Sadly - Incomplete information here. Missing the most important key information about the drilling out process / with what ir what size? Thanks for the idea.
@mightyfortress6595
9 ай бұрын
exactly!
@michaelbrewis
7 ай бұрын
If using an 18650 battery the number tells you the size. It's 18mm diameter and 65mm long.
@UncleDanBand643 жыл бұрын
East Texas Outlaw sent me! Nice job sir!
@EastTexasOutlaws
3 жыл бұрын
Thanks UNC !!!!!!!!!!
@Nighthunter-qq6fo2 жыл бұрын
So good video.but you just stripped it down.and you say drill it out.how big a drill bit would you use and which end would you drill from.
@kellyash45
Жыл бұрын
3/4" and from either side. You just want to enlarge the inside diameter is all so drilling from either side is fine.
@michaelbrewis7 ай бұрын
18650 battery is 18mm diameter - the battery number tells you the dimensions. 18mm diameter by 65 long. So drill a 19mm or 3/4"
@christopherpeterson14002 жыл бұрын
So in the end you just say so " drill it " so what size, what area. ?
@kellyash45
Жыл бұрын
The inside diameter of the battery tube needs to be reamed out to 3/4"
@themulesheriff30093 жыл бұрын
What size drill bit ?
@MrCowboyvic
Жыл бұрын
3/4
@goirishist3 жыл бұрын
What do you drill? And why?
@EastTexasOutlaws
3 жыл бұрын
The cylinder bigger so it would accept the 18650 battery
@kellyash45
Жыл бұрын
....and the 18650 gives you around twice the mAh rating (run time) as the 16650 battery option.
@MrCowboyvic Жыл бұрын
Just keep in mind...18650 has flat positive top...cr123 positive has nipple... need to get creative to fab raised nipple for positive end on 18650
@tomforeman4976 Жыл бұрын
What the he'll did you drill.
@kellyash45
Жыл бұрын
The inside diameter of the battery tube to 3/4"
@rgthomson1003 жыл бұрын
Buy one that takes an 18650 save yourself the bother
@theawakening29462 жыл бұрын
where the hell do u get the batteries??? i cant find them anywhere!!!
@kellyash45 Жыл бұрын
Do you know of a good 940nm IR pill available as a drop-in replacement for this 850 nm light?
@MrKeithsplace2 жыл бұрын
So what size drill did you use.
@kellyash45
Жыл бұрын
Use a tape measure or a ruler or a micrometer to measure the OD of the 18650 battery but one guy says it's a 3/4" drill bit to ream the tube out with. Other folks say to use a 16650 lithium battery because it fits without reaming at all. It looks like the 18650's have about twice the mAh rating as the 16650s so your run time will be alot longer with the mod that requires reaming to 3/4" and uses the 18650 batteries.
@MrKeithsplace
Жыл бұрын
Seems like a disassembly video with no explanation of what to drill, what size, and from which end.
@MrKeithsplace
Жыл бұрын
Would removing label on 18650 make it fit.
@michaelbrewis
7 ай бұрын
The number 18650 tells you the size of the battery. 18mm diameter, 65mm long. A 16650 is 16mm diameter and 65 long. Button batteries are the same so a cr2032 is 20mm diameter and 3.2mm thick.
@n2turkey3 жыл бұрын
Does it add any to your run time?
@kellyash45
Жыл бұрын
Since nobody's piped up in a year I'll give my 2 cents, lol.... IDK offhand exactly. What I do know is that you can do the math pretty easily. Look at the mAh values for 2 of the batteries that come with the light and add those together. Then look at the mAh rating of a single 18650 battery the mod will allow this light to accept and whichever number is larger is the battery that will last longer. I don't know any of this offhand as I write this but I do know that both of them will produce the same amount of light on the target so that's not a concern. Only the mAh rating matters when it comes to longevity of power so use that math to figure out which one will last longer... then let me know because I'm too drunk and lazy to do all that work for myself right now but I'm curious enough to make you do that work for the both of us😁
@Bitcoin_Millionaire3 жыл бұрын
Great info.
@citizensveterans6699 Жыл бұрын
Does the elevated voltage hurt the IR light?
@camyota
Жыл бұрын
It's actually less voltage.
@reiserx
Жыл бұрын
123 batteries are 3 volts each for a total of 6 volts. 18650 is 3.6 - 4 volts so it's a lower output but longer runtime.
@bedlamite423 жыл бұрын
Use hockey tape instead.
@uainttheone Жыл бұрын
Mine won't turn on and batteries are all the way up
@kellyash45
Жыл бұрын
You might have them in backwards
@joserrodz6 күн бұрын
Just a bad and useless instructional video !!! Ufff !
Пікірлер: 50
drill what out? it never explained it
@kellyash45
Жыл бұрын
The inside of the battery tube.....it's pretty self explanatory really, lol
@gerthbrooks3346
Жыл бұрын
no its not very self explanatory
Just but the 16650 lithium batteries they fit it perfectly . Saves a lot of messing around and potentially damaging the I.R.
@peteduncan921
2 жыл бұрын
I've been using a 16650 in mine and it seems to work fine. The 18650 may be easier to get and last longer, but they are both 3.7-volt lithium batteries. I can't see myself trying to drill out that tube to accept the larger battery.
you forgot to tell us "HOW TO" and what are we "DRILLING OUT"?
"Do your drilling and put it back together." ????? Did I miss something? What exactly am I supposed to drill? It's a great video on how to disassemble the light, but I'm failing to see how you are modifying the light to hold a different battery.
Awesome, would have been good to know a few months ago. Thanks for sharing, it'll save people a lot of money.
I’m guessing this is a joke video, where someone gives you a bunch of nuisance tasks and leaves out the final most important step.
@kellyash45
Жыл бұрын
If you don't understand he left out one thing, which is the 3/4" drill bit size to ream the inside diameter of the battery tube because the OD of the batteries is different, and you think the rest is "nuisance tasks", you REALLY should be taking your shit to a professional gunsmith and not relying on your faulty sense of mechanical aptitude. You're going to put your eye out one day 😆
Drilling...could you please explain?
It would be a great idea if the battery voltages were the same but it seems like a bad idea to lower the output by 40% with over 2 volts less to the light.
@simulatedzero
Жыл бұрын
Not really the case normally. And even if it was, it wouldn't be different for very long due to the voltage sag on CR123s. 18650 have a significant advantage in energy density and maintaining energy output. That's if the IR emitter is direct drive. Being that the light has modes, it's most likely a 3v emitter on a buck converter. In which case, you're not going to lose any light output at all and gain a huge advantage in runtime.
Sadly - Incomplete information here. Missing the most important key information about the drilling out process / with what ir what size? Thanks for the idea.
@mightyfortress6595
9 ай бұрын
exactly!
@michaelbrewis
7 ай бұрын
If using an 18650 battery the number tells you the size. It's 18mm diameter and 65mm long.
East Texas Outlaw sent me! Nice job sir!
@EastTexasOutlaws
3 жыл бұрын
Thanks UNC !!!!!!!!!!
So good video.but you just stripped it down.and you say drill it out.how big a drill bit would you use and which end would you drill from.
@kellyash45
Жыл бұрын
3/4" and from either side. You just want to enlarge the inside diameter is all so drilling from either side is fine.
18650 battery is 18mm diameter - the battery number tells you the dimensions. 18mm diameter by 65 long. So drill a 19mm or 3/4"
So in the end you just say so " drill it " so what size, what area. ?
@kellyash45
Жыл бұрын
The inside diameter of the battery tube needs to be reamed out to 3/4"
What size drill bit ?
@MrCowboyvic
Жыл бұрын
3/4
What do you drill? And why?
@EastTexasOutlaws
3 жыл бұрын
The cylinder bigger so it would accept the 18650 battery
@kellyash45
Жыл бұрын
....and the 18650 gives you around twice the mAh rating (run time) as the 16650 battery option.
Just keep in mind...18650 has flat positive top...cr123 positive has nipple... need to get creative to fab raised nipple for positive end on 18650
What the he'll did you drill.
@kellyash45
Жыл бұрын
The inside diameter of the battery tube to 3/4"
Buy one that takes an 18650 save yourself the bother
where the hell do u get the batteries??? i cant find them anywhere!!!
Do you know of a good 940nm IR pill available as a drop-in replacement for this 850 nm light?
So what size drill did you use.
@kellyash45
Жыл бұрын
Use a tape measure or a ruler or a micrometer to measure the OD of the 18650 battery but one guy says it's a 3/4" drill bit to ream the tube out with. Other folks say to use a 16650 lithium battery because it fits without reaming at all. It looks like the 18650's have about twice the mAh rating as the 16650s so your run time will be alot longer with the mod that requires reaming to 3/4" and uses the 18650 batteries.
@MrKeithsplace
Жыл бұрын
Seems like a disassembly video with no explanation of what to drill, what size, and from which end.
@MrKeithsplace
Жыл бұрын
Would removing label on 18650 make it fit.
@michaelbrewis
7 ай бұрын
The number 18650 tells you the size of the battery. 18mm diameter, 65mm long. A 16650 is 16mm diameter and 65 long. Button batteries are the same so a cr2032 is 20mm diameter and 3.2mm thick.
Does it add any to your run time?
@kellyash45
Жыл бұрын
Since nobody's piped up in a year I'll give my 2 cents, lol.... IDK offhand exactly. What I do know is that you can do the math pretty easily. Look at the mAh values for 2 of the batteries that come with the light and add those together. Then look at the mAh rating of a single 18650 battery the mod will allow this light to accept and whichever number is larger is the battery that will last longer. I don't know any of this offhand as I write this but I do know that both of them will produce the same amount of light on the target so that's not a concern. Only the mAh rating matters when it comes to longevity of power so use that math to figure out which one will last longer... then let me know because I'm too drunk and lazy to do all that work for myself right now but I'm curious enough to make you do that work for the both of us😁
Great info.
Does the elevated voltage hurt the IR light?
@camyota
Жыл бұрын
It's actually less voltage.
@reiserx
Жыл бұрын
123 batteries are 3 volts each for a total of 6 volts. 18650 is 3.6 - 4 volts so it's a lower output but longer runtime.
Use hockey tape instead.
Mine won't turn on and batteries are all the way up
@kellyash45
Жыл бұрын
You might have them in backwards
Just a bad and useless instructional video !!! Ufff !