I Can’t Be The Only One That Enjoys The Widebody He Did On This

@kangroroogaming8950

3 жыл бұрын

You’re 1000% right, his mustang widebody is so creative and cool

@josevillegasromerodaniel5841

2 жыл бұрын

I want to do this too my camaro I think it would look good Just that in my state on North Carolina I can’t find any camaros

For the lockout issue at least in 5.0 Mt-82 s550’s, a mantic clutch or mcleod rst clutch fixes it.

Get a blowfish racing bracket it supports the shifter so when they’re drive train flex the shifter flexes with the trans I have it in my 3v and it improved lockouts and shifter feel a ton

@3VJohnny

3 жыл бұрын

I was going to say this very thing as it was on my list. Unfortunately it is discontinued

@Kordare

3 жыл бұрын

I also heard the CHE torque limiters work well.

11:35 it sounds like an over reved Cummins and I love it

My favorite 3v mustang!

@Kordare

2 жыл бұрын

🙌🙌

love the videos. You are the definition of cool in my opinion(you ride BMX, have a sick house with a sick workshop and ride costume made cars). Cant be beat.

@Kordare

3 жыл бұрын

Really appreciate your support 🤘🤘

@oskarsusnik3343

3 жыл бұрын

@@Kordare No problem just wish i could mod my cars like you do(hoping to buy an E30 and mod it but i dont have a workshop)

@Kordare

3 жыл бұрын

@@oskarsusnik3343 you just gotta start and be patient! I'm self taught with everything to do with cars and I definitely didn't always have my shop to work out of.

@oskarsusnik3343

3 жыл бұрын

@@Kordare Am trying to be and just fixed my Puch e50 and love it and am starting on my driver’s licences and am on a mechatronic high g school

@angeloconsiglio5211

3 жыл бұрын

@@oskarsusnik3343 In my last couple of years of engineering school. Mechatronics is a dope area of work, follow through with it!

That came out sick. Love the Burnout!!🤘

@Kordare

3 жыл бұрын

Thanks 🙌🙌

That thing sounds like a koenigsegg CCX for an early Agera with the short exhaust run wow

@Kordare

3 жыл бұрын

That's a first, I'll have to look that up now 😂

@ricochetey

3 жыл бұрын

I just looked up what CCX is and yeah it sounds similar for sure 😄

@inutil6117

2 жыл бұрын

You are 100% right.

@ethansimon6216

2 жыл бұрын

The motors are actually fairly similar the koenigsegg v8 is derived from the Ford v8

Nice to see it together now!

Blowfish racing bracket is what you're looking for to fix that 2-3 lockout, they're becoming harder and harder to find though considering they no longer produce them for the 3650.

@Kordare

3 жыл бұрын

I also heard the CHE limiters can help a lot.

I have and MGW shifter with stronger locating springs that makes the 2-3 shift perfect with a Blowfish Racing support bracket and it's like a totally different transmission.

Living the dream man!

You should film the next drive at "leguna seca"

I went with the MGW shifter. No lockout in 3rd at all for me.

You need a watts links for that solid rear

Definitely subscribing, this is so sick

@Kordare

3 жыл бұрын

Appreciate it 🤘

Wow what a ripper and you really can't wrong with a classic Hurst shifter! Looks minty 👍 🇺🇲

@Kordare

3 жыл бұрын

Thanks I agree!

Still my favourite 3v

@Kordare

Жыл бұрын

🤘🤘

Man I would love to see a day in the life type video from you. just your average day to day

@Kordare

3 жыл бұрын

Maybe I'll do one 🤔

That car sounds amazing, makes me want a 3 valve so badly

Another video?! Oh hells yeah!

@Kordare

3 жыл бұрын

Trying to upload a lot more 🤘

nice 👍🏻

🔥🔥🔥🔥

Sold my s197 for a s550z I love the look of 3v s197’s, but can’t deny how good coyotes are in the s550 chassis. And s550’s don’t look bad either, too bad Ford hasn’t put a good clutch in the car

This car reminds me of the 2005 HW Mustang.

Haven't had time to follow your videos recently by I like the addition of the camera man

@Kordare

3 жыл бұрын

I'm thinking to do that more often, really helps speed things up and make it a little more interesting

I saw you drive by my house in Quarryville today, was pretty cool to see the mustang in person!

@Kordare

3 жыл бұрын

Yoooo awesome! I'm over at the skatepark

@Z3CHYD

3 жыл бұрын

@@Kordare I would definitely be over there if I wasn't stuck at home on steroids for sciatic pain man lol

@Kordare

3 жыл бұрын

@@Z3CHYD dang get well soon!

@Z3CHYD

3 жыл бұрын

@@Kordare thanks man! 70 hour work weeks and being stubborn have caught up to me!

Had the same one on my mustang! I loved it. Only bad thing is those two screws that hold the handle to the shifter. Mine would come loose from time to time and make the shifts feel weird. But other than that it was great

@Kordare

3 жыл бұрын

Yeah that actually did happen to the other one I installed. If this one ever does get loose I'll loctite them in.

@Was-here2

3 жыл бұрын

Same here, always came loose. Definitely watch out for this. I used a little loctite and it been pretty solid .

@its8bpm554

Жыл бұрын

Did the shifter coming loose cause you to grind into gears ???

@jestinmorse8248

Жыл бұрын

@@its8bpm554 No, just felt it come loose and had to take apart the boot to tighten the bolts back up. Ended up putting blue thread locker on it and never had that problem again.

Going to head to carlisle ford nationals this year. I'd love to meet you and see the car

@Kordare

3 жыл бұрын

I might try to come out!

@toybox5576

3 жыл бұрын

Definitely worth it. I'll have an s550 and mach 1 with me

I love your videos The algorithm is messing with you for some reason

@Kordare

3 жыл бұрын

Thanks! Yeah it doesn't like me right now but that's okay I'm not stopping.

You should make a video about the rpm act so many people do not know about it

You don"t need to buy anything. Palm an push your 2nd to 3rd shift. Don't grab the shifter for third just palm and push. and don't let me get started on fourth.

@coleprotocol318

3 жыл бұрын

That’s what I do with mine

I want to meet you one day

@Kordare

3 жыл бұрын

Maybe someday 🤔🤔

Let’s goo

Really wanna drop a short throw in my car but I don’t know any other way of putting it in other then dropping the trans or doing what u did. And I feel like dropping the trans is such a pain in the ass for a shifter and cutting it is just to much for me.

@Kordare

3 жыл бұрын

You also could get it in by just unbolting the driveshaft. That would be the easiest way without cutting.

this makes me miss my s197 so much 😭

@Kordare

3 жыл бұрын

😥😥

Try a stainless steel clutch line, 50$ fix.... might help the lockout. The stock is plastic and can expand. Just don't loose the clips! If you do there is a VW replacement as indont think ford sells it separately.

@Kordare

3 жыл бұрын

I was reading that the che torque limiter brace seems to be the best fix

@3VJohnny

3 жыл бұрын

@@Kordare That is what my research is pointing at as well. The blow fish racing bracket was the go to, but it's now discontinued.

What kind of looks and comments does this car get you out and about on the streets?

@Punchinelli

3 жыл бұрын

I want to know this too!!!

@Kordare

3 жыл бұрын

It's pretty funny, some people don't know what it is, a lot of positive comments and interest as to how I did the widebody.

Hey is the motor and tranny stock ? Im building my 3v in a similar way and was wondering if you've done any internals

@Kordare

3 жыл бұрын

All stock for now! Should probably do a clutch and solid driveshaft soon though.

WHAT IS THAT BLACK CIRCLE YOU HAVE ON UR DASH ?? I just bought a 3v and that same exact thing is on mt dash and I have no clue what it is

@Kordare

2 жыл бұрын

I believe that's just a piece of plastic for a suction cup mount. Previous owner probably put it there.

You should put bucket seats in the mustang

@Kordare

3 жыл бұрын

true but these are very comfortable for stock seats.

What turbo kit are running and do you have any other supporting mods on it? I'm thinking about boosting my 07 GT.

@Kordare

3 жыл бұрын

On3 kit and basically just everything that comes with it. I'd suggest getting a real wastegate though

@bowdisheousmaximus1342

3 жыл бұрын

Right on Bro. Thanks for the reply, I have a Tial WG and BOV currently but havent decided which Kit to go with. Its between on3 and CX racing. Been following for a long time and love the Mustang content (all your content really). Keep it coming!

@Kordare

3 жыл бұрын

@@bowdisheousmaximus1342 appreciate the support and you'll be good to go with the tial. Check out my turbo install series to see some of the challenges I dealt with.

The console doesn’t need to be removed for install for anyone attempting to do it

@Kordare

3 жыл бұрын

Yeah I kinda realized that too, but since it's so easy to remove its not a bad idea just to have it out of the way.

Is there a way for me to get the is300 exhaust you used to make

@Kordare

3 жыл бұрын

I might start making it again but don't have a timeline right now. Keep an eye on FB and IG for an announcement.

@920.streetstyle

3 жыл бұрын

@@Kordare sweet. I'll be waiting

No aluminum driveshaft bro?

@Kordare

3 жыл бұрын

Not yet....

Do you like super cars as well and if so do you think you’ll get one?

@Kordare

3 жыл бұрын

Yeah I like some of them, and I'm sure I'll eventually get one. Just don't have near the funds yet to practically afford it.

Would love to see the reaction of people of this car at a car meet

@Kordare

3 жыл бұрын

It's pretty funny, some are a little confused, some don't know what kind of car it is, a lot of positive comments overall.

Wyd year mustang is it

@Kordare

2 жыл бұрын

2006

You need a better slave cylinder for your 3rd gear problem, if it ain't that then syncro gone

@Kordare

3 жыл бұрын

I've read the che torque limiter brace usually fixes the issue.

@coleprotocol318

3 жыл бұрын

@@Kordare do a video on it! I’d love to see if it helps and will get one myself if it does!

@Kordare

3 жыл бұрын

Will do!

what do you do for a living????????????

@Kordare

3 жыл бұрын

I'm an engineer but that means nothing. Its all about being smart with money and living below your means.

MGW fixes this problem.

First

The only solution to fix that is to remove the transmission and ship it back to China with a note that says TRY AGAIN because in the end if you’re going to miss 1 gear you might as well just miss them all.

@Kordare

3 жыл бұрын

hahaha apparently the CHE torque limiter brace solves the issue.