Shop Work: Blade Sharpening

Website: www.FishersShopOnline.com
Plans: www.FishersShopOnline.com/plans
Instagram: / fishersshop
Store: www.Amazon.com/shop/fishersshop
T-Shirts: www.FishersShopOnline.com/store
Podcast: webuiltathing.libsyn.com/
In this video I demonstrate how I take a dirty, grimy, and dull blade and make it as good as new again with an easy cleaning process and a good sharpening. If you've got some worn out blades in your shop, implementing these practices can bring them back to life and save you lots of money in the long run. Check out the video, give it a like, and leave me a comment below!
00:00 - Intro
01:20 - Cleaning process
03:26 - Run-down of the machine
06:44 - Using the machine
11:33 - Worth it?
13:33 - Outtakes
Check out and subscribe to Mark!
Gunflint Designs KZread channel: / gunflintdesigns
LA's Totally Awesome: amzn.to/3kQpUGx
Blade Sharpener: amzn.to/3KDEr2G
UPDATE: Looks like they might be sold out. I found this machine which is very similar, and cheaper, but I've never dealt with the company selling it. Good luck! tinyurl.com/cbsmachine
Join Fisher's Shop!
/ @fishersshop
Affiliates:
SurfPrepSanding.com - "FISHER10" to save 10%
Starbond.com - "FISHER10" to save 10%
Mag-Tools.com - "FISHER10" to save 10%
BitsBits.com - "FISHER10" to save 10%
RZmask.com - "FISHER10" to save 10%
Bumblechutes.com - "FISHER10" to save 10%

Пікірлер: 440

  • @jonclearwater3189
    @jonclearwater31892 жыл бұрын

    I love your videos. I wait with anticipation for new all the time. So easy to follow. Easy to understand. And the outtakes at the end give it a humble human Factor that makes it relatable. I appreciate you

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Thanks, Jon!

  • @dia35
    @dia352 жыл бұрын

    Your narration and small references always crack me up.... it's never a DULL moment when watching your videos.

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Hehe, thanks! Glad you like them

  • @carlmclelland7624
    @carlmclelland7624 Жыл бұрын

    This should be considered a 'must have' tool for any woodworkers shop. I bought a Harbor Freight model ($55.00) and yea... it's Harbor Freight quality. I took it apart, modified a few critical components to suit my needs - AND - it does a stellar job! As for blade cleaning, I use the wife's liquid laundry detergent and put the blade in an old cookie sheet. Let it soak a while and use a toothbrush, and it comes out as clean as new.

  • @FishersShop

    @FishersShop

    Жыл бұрын

    Thanks for sharing

  • @stevepieri3536
    @stevepieri35362 жыл бұрын

    As always, a great video - thanks for sharing. “Flat head screws and some sawdust”… I love it!!

  • @vman2kay
    @vman2kay8 ай бұрын

    Subscribed not only because of the video, but the little humour in between :) Like it!

  • @FishersShop

    @FishersShop

    8 ай бұрын

    Welcome aboard!

  • @jennieanddavis
    @jennieanddavis2 жыл бұрын

    When I was a janitor, the LA’s totally awesome was our secret weapon - it always got any oily residue or grossness off when nothing else would cut through! It’s amazing on greasy cabinets (especially over the stovetop) in your kitchen! -Davis

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Yeah, I was quite impressed! I'll definitely be using this moving forward

  • @blueblur6447
    @blueblur64472 жыл бұрын

    I know as a content creator it must at times be difficult to come up with your next idea 💡 for us. You are always original or have a refreshing new take on a old idea... This falls into the realm of why hasn't anyone done this video topic this well yet! Really enjoyed this and inspired more than I expected. Need to steal all my neighbors dull blades and get one!

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Thanks! I appreciate that!

  • @jeremymcclanahan2389

    @jeremymcclanahan2389

    2 жыл бұрын

    This right here....100% agree

  • 2 жыл бұрын

    Thank you very much. I've ordered the machine here in Germany and now the blades are sharpened in no time. It is not just the money as you said, you have to go to he shop and then wait a week. Keep up the good videos.

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Great to hear!

  • @masoodamg6633
    @masoodamg66332 жыл бұрын

    I just joined this channel. It was accidental. You have a well-equipped workshop, I have never seen. congratulations

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Welcome to the channel

  • @danhunik7949
    @danhunik7949 Жыл бұрын

    As a guy that spent 18 years in a sawmill filing room repairing and sharpening saws I watched this with interest. To truly get a blade 100% sharp you should sharpen the top of the teeth as well. We did this every 4th or 5th sharpening on our saws. To clean the blades we used a wire cup wheel on a grinder because there was no coating on our saws. This can remove the coating on home shop blades so care would have to be used. All in all a very good video and the machine looks like it will do 1000s of saws.

  • @FishersShop

    @FishersShop

    Жыл бұрын

    Thanks, Dan!

  • @TheSMEAC
    @TheSMEAC2 жыл бұрын

    I’m a ~95% hand tool only shop, but I always enjoy your content. This winter when I went through my subscriptions to do “some clean-up”, your channel was a no-brainer to keep even if it falls outside my primary use and interest. Thank brother, keep it up. 👍

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    I'm glad I made the cut! :)

  • @MystiqueULH
    @MystiqueULH Жыл бұрын

    I have bought this machine because between a friend and myself there are plenty of blades to sharpen. But the directions on putting it together were lousy then I went to see if there was something on youtube to explain it step by step an there wasn't . But watching your video and seeing how the machine was put together helped me to put mine together. Thanks for putting up this video, it was a great help and your explanation on how to sharpen them was great also.. Now to sharpen some blades .......................................................................................

  • @greghomestead8366
    @greghomestead83662 жыл бұрын

    Very nice, not sure how often I'd use it so I'm shipping my blades to your next door neighbor so they'll end up at your place. Looking forward to receiving them back from you sharpened. Have a Jesus filled day everyone Greg in Michigan

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Haha, thanks Greg

  • @JasonPeltier

    @JasonPeltier

    2 жыл бұрын

    Sign me up for this also. I seem to have lost my flat head screwdriver.

  • @henrysara7716
    @henrysara77162 жыл бұрын

    Thank you for sharing. Sharpening tools is complementary job that require same attention as the any trade itself.

  • @fredjohn808
    @fredjohn8082 ай бұрын

    Thank You, You are the only one that made a tutorial the made sense. Just subscribed, very concise and right to the point. Best, Fred

  • @FishersShop

    @FishersShop

    2 ай бұрын

    Glad it helped!

  • @danmorgan3068
    @danmorgan30684 ай бұрын

    Very practical and helpful, I'm ordering one from the link. I really appreciate the thorough evaluation.

  • @djowpeter3445
    @djowpeter3445 Жыл бұрын

    VOCE É SUPER PROFISSIONAL, SÓ MAQUINAS DE PRIMEIRA,PARABÉNS.

  • @Mike-vt6is
    @Mike-vt6is Жыл бұрын

    Best part about that cleaner they sell it at the dollar store use it all the time.

  • @FishersShop

    @FishersShop

    Жыл бұрын

    Yup

  • @BruceAUlrich
    @BruceAUlrich2 жыл бұрын

    Great video! You really explained it well. And you will save a ton over the years on sharpening and probably have less frustration with your woodworking because of sharp blades.

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Very true! Already it's been a game changer. You never really realize just how dull your blades have gotten until you cut with a newly sharpened one.

  • @thecockneyworkshop
    @thecockneyworkshop2 жыл бұрын

    My wife’s just bought me one It’s good spent the whole day sharpening Im hooked Cheers mate

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Hah awesome! She's a keeper

  • @SawdustmakerLori
    @SawdustmakerLori2 жыл бұрын

    Oh boy.....you got a new toy! Looks like it does a great job and would be well worth the investment for anyone who needs a lot of blades sharpened. Thanks for the tool review/demo!

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    You bet. Thanks, Lori

  • @jernkar
    @jernkar Жыл бұрын

    I bought this sharpener and the instructions left a lot to be desired. This video is awesome, I had it set up and working in a few inutes.

  • @FishersShop

    @FishersShop

    Жыл бұрын

    Nice! Yes, the instructions are horrible, lol! Glad my video helped

  • @k2largerthanlife209

    @k2largerthanlife209

    Жыл бұрын

    Jerry, I agree. I watched this video when it came out and finally bought this unit. Like you I then watched the video for actual setup help. This weekend is sharpening time for me.

  • @TreeOfLifeWoodworking
    @TreeOfLifeWoodworking2 жыл бұрын

    This absolutely seems essential to every workshop!

  • @sammisworkshops3762
    @sammisworkshops37622 жыл бұрын

    nice video Drew, You always make me smile, was having a not so great day, its better now after your video, Thanks man, your a blessing!

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Glad you enjoyed it

  • @EthanCarterDesigns
    @EthanCarterDesigns2 жыл бұрын

    Lookin sharp!!! That is such a cool machine...I couldn't quite picture how it would work from listening, but now I get it and what a cleaver design!

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Thanks, Ethan! Yeah, it's done a fantastic job so far.

  • @bradleytuckwell4881
    @bradleytuckwell48812 жыл бұрын

    You always a pleasure to watch And re-sharpening is a great money saver also a lot of fun and very rewarding. Thanks for sharing

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    You bet!

  • @copperdolphin5291
    @copperdolphin52912 жыл бұрын

    Yep I found this to be both... thanks for bringing this to my attention. I had seen a flimsy one on another video. I have a ShopSmith Mark 5 that has a 1" & 1/4 dia. arbor hole. so have not been able to sharpen it.

  • @matthysloedolff
    @matthysloedolff2 жыл бұрын

    I found this video quite interesting and informative. I always wondered how one would go about sharpening circular saw blades. Also, I thought it was quite a nice touch at the end of your video as you walked out your shop and turned off the lights. 👌

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Glad it was helpful! Thanks for watching!

  • @raydillon4405
    @raydillon44052 жыл бұрын

    As always very informative and great video. Thank you Drew for sharing.

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Glad you enjoyed it

  • @AlienLeader4
    @AlienLeader42 жыл бұрын

    Sweet video as always. Thanks taking the time to explain this machine it will help in any furture decisions I make on whether is is worth getting one or not.

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Glad to help

  • @rickwatts2642
    @rickwatts2642 Жыл бұрын

    very good video. Clear, concise and great editing.

  • @FishersShop

    @FishersShop

    Жыл бұрын

    Thanks!

  • @kikyamart8749
    @kikyamart87492 жыл бұрын

    Well, even your neighbor runs out of sharp blades eventually... so it's good to know how to sharpen!

  • @clydebalcom3679
    @clydebalcom36792 жыл бұрын

    Educational, entertaining, and enjoyable.

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Thanks!

  • @YourLocalHandyman
    @YourLocalHandyman7 ай бұрын

    Good info. Great humour.

  • @lodidave
    @lodidave Жыл бұрын

    Enjoyed the humor.

  • @kevindavis1219
    @kevindavis12192 жыл бұрын

    Another great video! I have a handful of circular blades and have though about sharpening myself. Thank you

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Thanks for watching!

  • @bobbg9041
    @bobbg90413 ай бұрын

    I liked it, thought you were Sharp and to the Point.

  • @bskelly
    @bskelly2 жыл бұрын

    Nice work

  • @2979paul
    @2979paul2 жыл бұрын

    Great video

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Thanks!

  • @farzanali5589
    @farzanali5589 Жыл бұрын

    Very help full tanks

  • @FishersShop

    @FishersShop

    Жыл бұрын

    Happy to help

  • @stankrieger3598
    @stankrieger3598 Жыл бұрын

    Nicely done thank you

  • @FishersShop

    @FishersShop

    Жыл бұрын

    No problem 👍

  • @oojagapivy
    @oojagapivy2 жыл бұрын

    This was fun to watch after hearing all the fuss about it on the podcast. 👍🏻

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Hehe. Thanks for listening to the show

  • @MarvinResper
    @MarvinResper Жыл бұрын

    Thanks for the awesome information I have a lot

  • @FishersShop

    @FishersShop

    Жыл бұрын

    Glad to help

  • @andrebrazeau-te9ng
    @andrebrazeau-te9ng2 ай бұрын

    Good job cleaning

  • @FishersShop

    @FishersShop

    2 ай бұрын

    Thank you 😊

  • @dpmeyer4867
    @dpmeyer48672 жыл бұрын

    thanks

  • @MiscMitz
    @MiscMitz2 жыл бұрын

    Wow! Very cool

  • @ingemardean3203
    @ingemardean32036 ай бұрын

    Excellent demonstration, I enjoyed the video. Then I ordered the same machine. Thanks again

  • @FishersShop

    @FishersShop

    6 ай бұрын

    Glad it was helpful!

  • @ingemardean3203

    @ingemardean3203

    6 ай бұрын

    @@FishersShop I laughed so hard at the bloopers, your good at it. Stay safe

  • @ingemardean3203

    @ingemardean3203

    6 ай бұрын

    I ordered mine from Amazon, I should have it by November 27/23 God willing. Thanks again

  • @grumblycurmudgeon
    @grumblycurmudgeon Жыл бұрын

    @Fisher's Shop: I'm absolutely not kidding about this: I discovered some years ago that *liquid laundry detergent (Gain, Tide, whatever. I use Persil) serves as a (bafflingly-) fantastic blade cleaner.* Same process as you described: submerge (only needs about 5 minutes of soak time), toothbrush, then simply rise with water and pat dry. Resin, burn mark, and even the gym locker room smell falls right off. Not a clue why it works. But I swear on my table saw's life it does. The great part about this is everyone already has this sitting around the house (pretty much guaranteed), it's totally non-toxic, and if you spill any on yourself? Your clothes get CLEANER. Important pro tip: while the solution absolutely IS reusable, same at the one you illustrated, it's really, REALLY important you not pour it back into the starting bottle. My wife didn't talk to me for a week. In my defense: who washes all of their white clothes at ONCE? Also, when you're pouring a normally-sky-blue liquid and it comes out... we'll call it "Space Gray", who shrugs, thinks, "huh. Weird." and _chucks it into the machine with all their white clothes anyway!?_ ...Additional pro tip: The above questions are _not_ the correct response when confronted by ones wife about this matter.)

  • @phillipstanfill5392
    @phillipstanfill53922 жыл бұрын

    Awesome man thanks

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    No problem 👍

  • @Earlkeating82
    @Earlkeating822 жыл бұрын

    Love the outakes 🤣

  • @patrik978
    @patrik9782 жыл бұрын

    amazing!

  • @MCsCreations
    @MCsCreations2 жыл бұрын

    Really fantastic machine, Drew! 😃 Thanks for all the tips!!! Stay safe there with your family! 🖖😊

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Thanks!

  • @JrgenGyhrs
    @JrgenGyhrs2 ай бұрын

    God og informerende video. Du har også en god humor 😅. Har selv en slibemaskine og er godt tilfreds. Savklingerne er dog blevet billigere og det skal man lige ha med i sine overvejelser inden man køber den. 👍

  • @FishersShop

    @FishersShop

    2 ай бұрын

    A good saw blade is still pretty expensive. I've saved a lot of money by using this machine so far. It paid for itself the very first time I used it

  • @chetankumer1372
    @chetankumer13724 ай бұрын

    I need this Machine

  • @clarkthornock5828
    @clarkthornock58282 жыл бұрын

    Thanks for the video. It was very informative. The alternate sharpener you suggested is actually the same model. If you look closely at the pictures, you can see the model number.

  • @myopinion6328
    @myopinion6328 Жыл бұрын

    Dish soap and water works great too 😊

  • @partytempo
    @partytempo2 жыл бұрын

    "I flipped the album over to side B" - begrudgingly laughing at that one

  • @mirthenemrys
    @mirthenemrys2 жыл бұрын

    Love using Totally Awesome, never had a mess it couldnt deal with. Works great on car interiors as well, used it on a 15 year old car that had kids in the back, never been cleaned fully... seats looked like new after using the stuff..... would have NEVER considered using it on saw blades... like ever.... (oh, its also generally really cheap to get the concentrate at places like dollar general as well, so yay)

  • @marcslonik5096
    @marcslonik50962 жыл бұрын

    I followed the story of this particular video on the podcast. Sorry it turned out the way it did, especially that it is a great one - as always. Hope the video does great on YT.

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Thanks for listening, Marc! :)

  • @user-jchjkitv77896
    @user-jchjkitv778962 жыл бұрын

    Love your content ☺️

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Thank you!!

  • @dgoddard
    @dgoddard2 жыл бұрын

    Great vid!

  • @SSFWElyone
    @SSFWElyone4 ай бұрын

    Great review, thanks. (I use oven cleaner on my blades. (do it outside, the stuff stinks). A few sprays, wait a few min, wipe off. done. Gets off the worst sticky tree resin, whatever,)

  • @FishersShop

    @FishersShop

    4 ай бұрын

    Nice!

  • @faragmostafa633
    @faragmostafa63310 ай бұрын

    I was really surprised how much cutting power (and torque) this saw had out of the box. I've used other (10" saws) previously and was pretty surprised with the speed and cutting ability of this Dewalt saw.I have bolted mine to a table to minimize movement which I highly recommend.This is a Great saw kzread.infoUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe with a light to see your cutting line (not a laser line).I'd recommend this saw fro anyone looking to upgrade from a 10" miter saw.

  • @juanlanda967

    @juanlanda967

    4 ай бұрын

    The shadow line is great for shops, not so great if you're outdoors. Especially on sunny days it gets difficult to see a laser is nice to have. Ask me how I know. lol the accuracy of the shadow is dead on.

  • @masoodamg6633
    @masoodamg66332 жыл бұрын

    It was Great, Thanks👍👍👍👏👏👏

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Glad you liked it!

  • @teaguewhite26
    @teaguewhite262 жыл бұрын

    Thanks Drew, always quality educational informed video. Also, you blade sharpening unit already sold out, 🤣😂🤣

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Haha, I saw that! Oh well. That design is produced by a number of companies though. Not sure about what they charge, but you can find it if you really hunt for it. I'll probably come up with a list of companies that sell it before I release this vid to the public. Thanks for watching and for your support!

  • @whitevanman8703
    @whitevanman8703 Жыл бұрын

    Try vinegar for a cleaning solution, it works great and saves a trip to the store. Use cheap stuff, if you use your wife's best Italian balsamic specially infused with exotic herbs vinegar it leads to marital discord.

  • @misterwolf9227
    @misterwolf92272 жыл бұрын

    I saw your woven cutting board, very interesting very nice. Then I saw link to this channel click Learn how to sharpen blades at home. Now I don't know what I wanna do more..make a few woven cutting boards or shapen blades.. great work,love your channels.

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Thanks and welcome

  • @Ding_Bat
    @Ding_Bat2 жыл бұрын

    The use of the toothbrush is brilliantly ironic! Probably the first time a toothbrush was used in any workshop to clean, well, teeth.

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Hehehe... what do you use? I can't even think of what else I'd use instead of a toothbrush.

  • @Ding_Bat

    @Ding_Bat

    2 жыл бұрын

    @@FishersShop I'm not in the blade (tooth) cleaning business just yet. I do clean my mountain bike drivetrain when it gets really crusty, but I use a dedicated paintbrush for that - not a toothbrush. And I use a feather duster for cleaning the CNC. 😂😂😂

  • @jasonbailey9139

    @jasonbailey9139

    2 жыл бұрын

    I get brush sets that have steel, copper, and nylon bristles. I buy them for the metal bristles, brushes, but figure I should make use of the nylon. I’ve used toothbrushes in the past, though.

  • @captainsawdust1

    @captainsawdust1

    2 жыл бұрын

    Since every dentist recommends soft toothbrushes, cut the bristles in half with sharp tin snips, scissors or a chisel and you will have stiffer bristles for better scrubbing.

  • @veratonnisen3639

    @veratonnisen3639

    Жыл бұрын

    How much did you spend on the sharpening machine?

  • @turpskadey
    @turpskadey2 жыл бұрын

    My father was a saw and tool sharpener when I was young and had a workshop of HUGE machines that accomplished the same thing. Great to see the process these days

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Very cool!

  • @turpskadey

    @turpskadey

    2 жыл бұрын

    @@FishersShop seriously, seeing those great hulking floor standing workshop green colored machines replaced entirely by a bench top version is surreal but very cool

  • @reaper060670
    @reaper060670 Жыл бұрын

    Dude u make the best and funniest videos it needs to be said.. I love the content and always get a good laugh while learning some valuable woodworking skills along the way so thanks Mr Fisher.. I'm only a week away from getting my 1st ever cast iron table saw and I cannot wait. I will get me one of these bad boy Blade sharpeners once I get to using my newest table saw far more. I never realised that the thinner kerf saw blades would cause wobble to the extent that mitre cuts/45 degree cuts, etc could be made to look so bad bcos the kerf of blades were too thin.. It makes sense I suppose but with the narrower blades I used for ripping plywood they would cut so fast but I struggled to get straight cuts for the most part. I guess u could also blame it on the piece of sh#t table saw, sorry bad excuse for a, that I've been using for the past 7/8 months. What?! It is my only saw to date and I'm not long enough in this sweet woodworking game to have any real world experience. I've been improving consistently enough to upgrade my Table saw now. The saw I'm about to get has a beast of a Rip fence too which is a huge change for me. The one I have moves slightly and causes my cuts to look whack.. Shite is the operative word I was looking for Mr Fisher.. LMAO. My apologies for such a long drawn out comment which had no bearing on ur video whatsoever. I apologise again for still typing. Really enjoy ur videos my bro. Keep up the brilliant work. Irish woodworker in the Buildizzin'.. Take it easy pal.

  • @garymalkinfishing2397
    @garymalkinfishing23972 жыл бұрын

    This is a great video and I thank you. When I went to your amazon link, it showed this product was out of stock and was not sure when or if it will be back in stock. I guess other people liked it as well.

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Looks like it

  • @robandsharonseddon-smith5216
    @robandsharonseddon-smith52162 жыл бұрын

    I want one! I totally don't need one though - I probably get one blade sharpened per year so I'd have a fairly long payback time. Well worth it if you do sharpening as a hobby though.

  • @darrylbuckett5380
    @darrylbuckett53802 жыл бұрын

    We just had one of these machines donated to our "Mens Shed", (I guess we had better learn how to use it, and save a whole bunch of money. Great video, Cheers

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Nice! Hopefully the video helped

  • @Mark_Wood
    @Mark_Wood2 жыл бұрын

    Looks great Drew. I didn't even know I needed one but now I do!

  • @John-gm8ty
    @John-gm8ty Жыл бұрын

    totally time to install a DIY shadow line lamp in your mitre saw too ;) it makes it SO much easier for accurate cutting!

  • @ThisTall

    @ThisTall

    Жыл бұрын

    In my opinion shadow line indicators serve zero purpose at all. I’ve had many and you still have to drop the blade to at least 1 inch from the wood to see where it’s going to cut. You may as well just drop the blade right to your line. With the blade all the way up, you can’t even see where the blade shadow is on the wood.

  • @John-gm8ty

    @John-gm8ty

    Жыл бұрын

    @@ThisTall you need a high intensity LED such a s a true CREE and it calibrated properly to the blade, in mine, I used one from a push bike super bright headlight, the line is super clear with the blade well away from the work piece.

  • @markwhitis
    @markwhitis11 ай бұрын

    I just watched your video and another suggesting LA totally awesome for blade cleaning. People use your la totally awesome cleaner as a dechrining solution to strip chrome off of parts. Saw blades have chrome in the carbide and sometimes as a coating/plating on the side of the blade. A number of common cleaners seem to strip chrome off in as little as 15-20minutes. Some which have been mentioned as attacking chrome sre LA totally awesome, 409, fantastic, simple green, several purple cleaners, bleach, oven cleaner, etc. Many of these were mentioned on the model cars mag forum. Simple green themselves says a long soak can leach chromium from carbide which I found after someone said it could damage the side coatings on newer blades.

  • @FishersShop

    @FishersShop

    11 ай бұрын

    Simple green definitely damages the side coatings. I have numerous blades that lost all their printing and coatings due to soaking in simple green but I didn't get the feeling it was deteriorating the blade. It literally just caused the powder coating or the print to come off.. I wasn't aware that it could due further damage. Interesting, thanks for sharing

  • @caskwith
    @caskwith2 жыл бұрын

    Great video but would highly recommend some dust extraction there, carbide dust is nasty, like seriously nasty.

  • @cidercreekranch
    @cidercreekranch2 жыл бұрын

    That cleaner is AWSOME! And cheap from the dollar store. I also use Simple Green BBQ cleaner to clean blades.

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Yup, I use Simple Green too. This was my first time using LA's totally awesome and I like it just as much... probably a bit more than Simple Green.

  • @partytempo

    @partytempo

    2 жыл бұрын

    LATA cleaner is at my local St Vincent's thrift store and it is surprisingly good

  • @JasonPeltier

    @JasonPeltier

    2 жыл бұрын

    I soak my blades in Simple Green on the lid of a 5-gallon bucket. It takes maybe 15 minutes and the pitch just floats off. I like that idea of using the bottom of a bucket and making a spout. Time to upgrade my process!

  • @ostate17
    @ostate172 жыл бұрын

    Nice work. My only complaint is having to wait a month til the next one. 😎 My son and I love your videos!

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Sorry! Since I do everything myself I can't easily crank them out any quicker

  • @paulmarsman8758
    @paulmarsman87582 жыл бұрын

    I must have missed the shipping address for Fisher's Sharpening somewhere in the video?? I'd be happy to help you feel like you're saving more money by sharpening my saw blades!

  • @WreckDiver99
    @WreckDiver992 жыл бұрын

    Hey, bring me back my blades. You said you were just "Borrowing" them! Nice little machine for sure.

  • @newt2010
    @newt20105 ай бұрын

    Sweet. Hillbilly packing tape. Cheers.

  • @markhenry2826
    @markhenry2826 Жыл бұрын

    Well done…

  • @atomictyler
    @atomictyler2 жыл бұрын

    you could have just moved next to a new neighbor. bam! fresh blades!

  • @louiswhitney1761
    @louiswhitney1761 Жыл бұрын

    Boy did I need that…😂😂

  • @codygarner7495
    @codygarner7495 Жыл бұрын

    I had just received mine today, watched this video to figure out how to use it. Great video! Although the smallest insert for the blade is a tiny bit too big for my Diablo blades. Don't have a metal lathe either 😩

  • @FishersShop

    @FishersShop

    Жыл бұрын

    I had the same issues, Cody. Wasn't sure if it was a fluke or not so I didn't show how I fixed it in the video. I took a bolt that fit close then wound it with tape until the insert fit perfectly on it. Then I chucked the bolt up into my drill press and simply held a metal file against it. I had it fitting perfectly into my saw blades in less than 5 minutes.

  • @AGlimpseInside
    @AGlimpseInside2 жыл бұрын

    Looks like it does a bang up job. But I’m a little disappointed it’s not going to sharpen my 30 inch sawblades

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Yeah, what a let down. Haha

  • @glencrandall7051

    @glencrandall7051

    2 жыл бұрын

    Cut them in half and make them into 15 inch blades.

  • @hakonjohansen4003

    @hakonjohansen4003

    Жыл бұрын

    There is an extension made to handle your blade I think.

  • @floydc3664
    @floydc36642 жыл бұрын

    Totally Awsome $1.00, 20oz bottle at Doller General, it works as good if not better than other blade cleaners for 10x the price. Great on router bits too...

  • @bobd.
    @bobd.2 жыл бұрын

    dagnabbit , there goes another handful of cash. :-) Should be here tomorrow. Thanks Drew. I have a pile of blades that need sharpening. I added up how much it would cost to have them sharpened plus postage and I realized after sending them out twice I would have spent as much as this sharpener. So I figured I'd give it a go.

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Have fun sharpening! :)

  • @jum5238
    @jum52382 жыл бұрын

    This is your neighbor. I want my (now) sharpened blades back.

  • @Ray_Sellner
    @Ray_Sellner2 жыл бұрын

    Scroll down the Amazon page. It's been updated with a water drip. This should be their tutorial video.

  • @10FingersWoodworking
    @10FingersWoodworking2 жыл бұрын

    Fantastic. Does the machine have scales so you can repeat specific angles on the axises.

  • @rodpotts2666
    @rodpotts26662 жыл бұрын

    Dang you bought the last one!

  • @jimbo2629
    @jimbo2629 Жыл бұрын

    I have this machine. I had the same problem with the blade fouling on the motor casing. It’s a big design fault. I ended up buying a grinding wheel that sharpens on its back. I recommend marking every other tooth as it’s easy to lose track part way round. Typical Chinese product, really good almost but one major fault that you have to get around. Remembering how to set up between sharpenings is also a problem. Best to make notes beside the machine, or refer to this video and don’t let anything slip during the sharpening process. If you own this you don’t use your blades when they are dull. Time to sharpen is at least half an hour allowing for getting your head around its use. You are only going to use it very infrequently. Don’t try if you are tired.

  • @tonydelgobbo1028
    @tonydelgobbo10282 жыл бұрын

    Nice machine... cast iron takes vibrations the best of all metals.

  • @alfredschmidt3659
    @alfredschmidt3659 Жыл бұрын

    Wood buildup on blade teeth cause a lot of the dullness! Other than unsharp teeth. Regular cleaning is a needed as you go.

  • @Sebastopolmark
    @Sebastopolmark2 жыл бұрын

    My take away is for your neighbor to buy one and have him sharpen your blades for a beer or two (just one per blade)! !! !!!

  • @What_Other_Hobbies
    @What_Other_Hobbies2 жыл бұрын

    Respiratory protection is highly recommended. Carbide dust is worse than wood dust.

  • @ThePoultryGeist
    @ThePoultryGeist2 жыл бұрын

    Just FYI, you can find a big bottle of LA’s totally awesome at Dollar Tree. Great stuff!

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Yeah, I like it so far

  • @DavidMcCabe
    @DavidMcCabe2 жыл бұрын

    Oh wow, what a nice video! This manufacturer should hire you to do some sort of review of their gear or something!

  • @FishersShop

    @FishersShop

    2 жыл бұрын

    Thanks! :)