Well here I am, my light just came on and my wheel is now tighter when driving . We didn’t ask for this computer bullshit. What happened to a good old fashioned 4 tires and an engine.

@Chaosgaming04

4 ай бұрын

Mine has the same problem did you ever get to fix it?

@zechoism

4 ай бұрын

Most people don’t want a Fred Flintstone car. We absolutely did ask for these computers. They rule and most of these items are easily fixed. Things break and need maintenance, even those old junkers.

@GavinoFlores.

4 ай бұрын

If anyone is wondering I had the same issue.Turned out to be a circuit breaker A that's grounded on the side of the fuse box.

@JasonLee-lv7tm

Ай бұрын

Nobody made you buy the “computer bs car” so it looks like you did ask for it Otherwise you’d have purchased a classic vehicle

@JasonLee-lv7tm

Ай бұрын

@@GavinoFlores.nobody was wondering and I doubt it was a circuit breaker

Very thoughtful, generous, and well made video. Thank you

Thanks man. I have a similar problem with my 2017 but it’s not the shift bushing it’s more complicated than that. Your video is the first one that has steered me down the path of figuring it out. It happens to my car when it’s very humid like foggy and or raining. But otherwise it’s fine. Anyways I appreciate that advice and I will read thru the comments and maybe add a fix here if I figure it out.

Boom. This is what KZread videos should be done like 👍

Gracias

My scanner shows no codes but little used truck had a slow low battery start when this started. Thanks for the video.

I have a S550 Mustang that I take to autocross. I set it on Track mode and about 50% of the time I get service advanced track. Once I restart the car, the code clears. I have no idea what it is. I really like how the car drives with advanced Trac. Guess I’ll need to scan it while it in error

My fusion 2016 has power assist problem and service adv trac issue should I change the steering rack ??

Would replacing the air ride system with springs cause it???????

Hey I have a few questions I have a similar problem rn but there are some different lights

So today on my way to work in my 2018 mustang gt my car suddenly bogged down and yellow wrench came on saying service advance trac. While I was in track mode never has the vehicle ever done this to me and boy did my heart drop. Was wondering if u think one of these issues caused it to happen...

This is happening to me but only on the highway at speeds. Over a 100 K once I dropped speed below that it turns off.

Thank you for the video and info. I've been struggling with this issue for the past year on my 2021 Ranger. First trip to dealer a year ago under warranty they scanned and found code C003A but didn't find a problem when an electrical diagnostic was run. For some reason they replaced a rear wheel speed sensor, cleared the codes and called it good...which it wasn't. Problem came right back....fortunately I didn't pay anything. The issue comes and goes but never stops from driving. Lately it's happening a lot, so took it took it to dealer for oil change and diagnostic, but this time bumper to bumper is gone. They want $175 just to try and figure out what's wrong...and for which I told them No!...and which thanks to you seems to be an OBC scan and some possible very easy fixes. Feeling a bit dumb because I have a scanner and should have thought of this, but really appreciate the the guidance here to get me thinking straight on this issue.

Just got 16 navigator back from dealer for recall of brake booster pump, service wrench symbol came on and advance trac light comes on then goes away. Pulled neg cable to try to reset, but light still comes on, back to that dealer monday, car ran perfect before they touched it

My 2019 edge does it Everytime i hit a pothole the traction control and abs light stays on until i restart the car. Hoping it is a tire sensor

How expensive are these things to fix?

Having this problem on my 2016 interceptor utility

I’m having this issue on my 2018 f150 but I’m getting no codes at all and it comes and goes randomly when you start it but goes away after you start driving for 10min or so

Mine seems to be a wire issue somewhere. It comes and goes and stays off more when the temp gets hotter

Having similar issues with my 2017 Ford Fusion. Starts when turning the battery on: flashing warning signs, check engine, power steering, ABS, and hill assist disabled. I USED to be able to unplug the battery and let it sit before re plugging it in and the car going back to “normal”. Now, however, the last time I did that it wouldn’t reset.

@RicardoRamirez-hy2de

23 күн бұрын

Did you figure it out ?

Wheres the link to the decent scan tools

My using FORD FUSION 2014 MODEL i have been seeing this Service Advance Track when ever on a rough road i don't knw what could have cause that am thinking it might be the Wheel speed sensor so please how can i fix it

@guanako503cristian

Ай бұрын

Did u find the problem?

@worldcelebrityisland8813

Ай бұрын

@@guanako503cristian Yes i took it to a mechanic shop and he changed both front wheel censors and the problem got fix and it doesn't cost that much i think i paid $20

@kentuckywindage222

20 күн бұрын

​@@worldcelebrityisland8813 I have the same problem on a 2015 Exploder. Advancetrac, downhill, abs lights on.

@worldcelebrityisland8813

19 күн бұрын

@@kentuckywindage222 take it the mechanic and let them scan it for you may be the wheel 🛞 censors are damaged

@kentuckywindage222

19 күн бұрын

@@worldcelebrityisland8813 Thanks for the reply

Hi My Ford Edge has gone in to limbo mode car driving slow what to do

I have these issues with ford 2016 wildtrak ranger. intermittent loss of power steering. whenever I turn the wheel to the right or left, it pushes back to center real quick. I recently changed my upper arm bushings and shocks. Do i need an alignment and do i need to reprogram the steering sensor?

@RicardoRamirez-hy2de

23 күн бұрын

Did you ever figure out the issue?

@mistergreen6557

23 күн бұрын

@@RicardoRamirez-hy2de yeah.. they open up the steering module and the circuit board is bent. they soldered everything that needs soldering. something hit the module very hard. so, they put it back together and check all connections with the harness. they even put a cable tie wrapped around the module that tightened up the harness.. it's been 6 mos now and it's fine.

@RicardoRamirez-hy2de

8 күн бұрын

@@mistergreen6557 gotcha, thank you sir, I just had mine fixed and was my ABS module, had the same issues as yours with the loss of steering wheel and lights coming on

@mistergreen6557

8 күн бұрын

How much did it costs you?

I had to jump start my 2016 f150 and now it is really hard to steer! And I have a light on my dash that came on?

@Surfonh2o

11 күн бұрын

I have the same issue on my 2017 F-150. After replacing my battery my steering wheel became my stiff when turning. Soon after the advance trac light would activate. When I turn off and restart my car the code is gone but steering still stiff. Did you ever figure what was causing your issue ?

I'm purchasing two 2012 f150s with service advance track issues, and the trucks won't steer at all. I haven't had a chance to diagnose them fully yet. Just wondering if these two trucks might need a new rack and pinion or if it might be an easier fix potentially. Thanks

@brandonyafanaro9710

6 ай бұрын

I just paid 1400$ for new rack and pinion on my 2012 fusion sel, my service lights just came back on tonight.

@brandonyafanaro9710

6 ай бұрын

So no, don’t let them talk you into rack and pinion

2015 expedition my light came on but Is no throwing any codes, speed goes fast and cruise control works fine as well any help please??

@HVAC_Mechanic

4 ай бұрын

Your scan tool may not be able to read all the codes and modules (ECM/PCM/TCM/ABS).

@kentuckywindage222

15 күн бұрын

My 2015 Exploder is doing the same no codes showing. Tried O'Reilly ans Advance. Advance said battery was low needed charge, alternater good. Replaced battery and next restart dash cleared. After about 75 miles turn left at a traffic light my brake pedal shuttered like antilock and lights came back on. Anyone have this issue?

What if there are no codes displayed after a scan? While driving home from the store in gusty conditions today, abs light came on, service advanceTrac, pre collision assist not available, hill start not available, check park aid. I cleaned windshield and collision sensors, did a scan with no codes, started 2019 Ranger got all the error messages, drove around block, steering didnt feel right. Parked in drive rescan with no codes.

@67VW

7 ай бұрын

Same thing for me, but lights came on for a short time and went out on their own. The next time it happened, I pulled over immediately with warning lights still on and no codes showing.

@bilbsk.2510

3 ай бұрын

@@67VWo

@RicardoRamirez-hy2de

23 күн бұрын

Did you figure it out it ?

@randallgreer1994

23 күн бұрын

@@RicardoRamirez-hy2de I drove 3 miles to store at normal speed, i.e above the 20 mph in my neighborhood. When I got back in truck from shopping....all the error messages were gone. Seems like I needed to drive a certain distance above a certain speed for the computer to reset.

@RicardoRamirez-hy2de

8 күн бұрын

@@randallgreer1994 oh dang, well that’s good, ended up being my ABS module for me 😪

Mine flashed for a moment when I put the full size spare on it. It went away on its own

I’m backkkkk, I just paid $1400 to have my rack and pinion replaced and guess what, same fucking issues 2 weeks later . My messages just popped back up tonight . So it’s not the rack and pinion

@BigHRepair

5 ай бұрын

Ever figure out what it was? This computer crap is more of a headache than anything

@fZionists78

3 ай бұрын

I hope they had substantial evidence your rack and pinion needed replacing. Half a dozen minor issues can cause this, and they went straight to one of the most expensive possibilities? They clearly reset the computer which bought them two weeks before the code came back, they likely didn’t fix anything necessary.

@brandonyafanaro9710

3 ай бұрын

@@fZionists78 I found out they just didn't do the flash code bc they thought it would be good to go. So yes they fixed the rack and pin but didn't flash it til the second time it happened. it's been a couple months now and my car is running normal again

@ChettyBaker

2 ай бұрын

@@brandonyafanaro9710 I am wondering, if it was the rack and pin wouldn't the car make a cracking noise when you turned the steering wheel?

My codes are bad o2 sensor and bad map sensors does this even make sense. car will run fine for about a minute then as soon as lights come on its starts to sputter and run bad

@joshualewis2636

5 ай бұрын

Mine too

@barrystreeter8581

5 ай бұрын

@@joshualewis2636 Ford telling me I need a new tranny 7500$ waiting on a second opinion cause it seems electrical. Runs fine until advance trac light comes on.

3000 code nothing else

“ Built Shitty Ford “

My Advance Trac service light came on and hill decent fault got trigger shutting down abs stability amd traction control going to go clean up the battery and check the fuses before i take it to mechanic and get raped by my wallet. lol

@musallemalaamri416

16 күн бұрын

Hi, I have similar issues in my F-150 2018, I scanned and found Lost communication with Anti-Lock Brake system ABS. The electrician said needs to replace ABC completely!!! Is it Right ?

This feature cause more danger than safety. Service AdvanceTrac turned on and locked my steering wheel. This shit is dangerous asF