ACDelco Serpentine Belt amzn.to/3ifGfDx Autel MS906TS amzn.to/3a26b2j 3/8 Swivel Head Ratchet amzn.to/3zLUuGa XTOOL D8W Automotive Diagnostic Scan Tool with 3-Year Updates, amzn.to/3tERIVJ

Take of the front skid plate and do this job from under the truck. It's 10 times easier. Use a roll of shop towels for a comfortable pillow 😌. Oh another thing! There's a small hole on the bottom of the tensioner. Take a skinny L shaped Allen screw and release the tension. Once you release the tension, stick that L shaped Allen key in the hole. That will hold the tensioner back. Once the new belt is put back in place, release the tension and pull out the L shaped Allen key and done.

@737mechanic

2 жыл бұрын

I have found it is more of a pain trying to reach both hands down or up to the tensioner and put a pin in than just keeping the ratchet or wrench on it and pushing or pulling when you are ready to put the belt on again. Doing from the bottom is an option I didn't want to mess with taking anything off that doesn't need to come off plus I hate laying on the ground.

@krissteele2661

2 жыл бұрын

Thank s for tip RICH 🤔👍👍👍👍

@T3860ifyDubstep

2 жыл бұрын

@@krissteele2661 no problem! How did the job go??

@edwinmiller7643

Жыл бұрын

Great advice

@TheRichjeremy

7 ай бұрын

Rich speaks the TRUTH!

3:00 was the best when you shoved the diagram down

@vlad1357

10 ай бұрын

😂

@jacobluce6904

Ай бұрын

That was hilarious.

I like bottom method , quick removal of skid plate . Thanks for upper install vid .

only video I can find of someone doing this from the top. Thank you!

The last thing you did on removal was route it over the fan, so the first thing on replacement would be to route it back over the fan to keep it simple.

lol, at the 10:00 minute mark is the moment he realizes..."Ooops, I forgot to go over the fan first". I probably would have done the same. I have to do this soon, thanks for the video.

Your video gave me the confidence to take this on myself. Thanks!

I would like to express my gratitude for posting the instructional video on how to replace a belt. I appreciate your videos. Since I know I will be installing a new belt, I am wondering if I should simply cut out the old belt. I am also grateful that you included the part in the video where you struggled with the installation. This way, if I have a meltdown and cannot install the belt, I will know that it was not easy for you either. Often when I watch a video, the person completes the task in seconds, which makes me wonder why I bother attempting to do things myself.

@737mechanic

2 ай бұрын

Yes, you can cut the old belt off. One thing you may want to do is measure the new belt with the old and make sure they are the same.

Had an idea for those nerdier guys here. If you have a discord or video chat app on your phone and you have a buddy with you, you could stream from one phone to the other to see a little easier where your belts going. Imma try it friday. I'll lyk. Great video man. Very easy. Appreciate it.

Great detailed video. The diagram was very helpful. Much appreciated. Thanks brother

Thanks for sharing this video great job 🎉🎉🎉🎉🎉🎉I’m going to replace my today

Hey man thanks a lot brother ,saved me a little cash and boosted my confidence 🙏🤙

Good job' gonna do mine tomorrow, I removed the radiator and fan shroud and the bottom skid plate to give me more room. Can't believe you did that without hearing a few damns and a couple of shits on the side .Thanks much!!!

@TucsonDude

5 ай бұрын

Nah...why remove the fan shroud when you can bruise up your forearms like I did??

Nice work my belt just broke today so will do mine soon, i took a pic of ur paper.

Thanks for sharing this video great job 🎉🎉🎉🎉🎉

Thank you very much on how to change serpentine belt , I will be doing it your way on my Taco 🤠

That view inside the engine Bay helps a lot! I paid someone to do this for me but I just wanted to see what I was paying for.

@nelsonosorto5345

2 жыл бұрын

How much did they charge for the job?

@EzMDr

Жыл бұрын

@@nelsonosorto5345 $25

@TucsonDude

5 ай бұрын

@@EzMDr That's certainly not shop wages.

Just checking, if you replace the tensioner pulley that is the only pulley that has a reverse thread is that right and the other 3 are standard direction left to loosen?

Awesome video man. Thanks ALOT!!!

Great Video! Thanks

Thanks a lot for the vidio!! I'll help me to replace mine!!

Thanks, I will do this soon, I know it will not be easy

Thank you!

This is a Good video

Thank you

Thank you You Are Good.

Thanks

thanks friend for diagram of band✌️✌️

Great

How many belts does this have altogether? Is it just serpentine belt and then the timing chain?

@737mechanic

2 жыл бұрын

Yes, just the one serpentine belt. Of course, the timing chain hopefully will last the life of the engine.

Thanks for this video. I'll try to do this my self. So is just one belt that goos around ac water pump and alternator??

@737mechanic

10 ай бұрын

Yes just one belt.

@myuploadsvideos

10 ай бұрын

@737mechanic great. thank you!

@myuploadsvideos

10 ай бұрын

It went smoothly I was able to change the belt thanks to your video!

I took off the skid plate and did mine from the bottom ...so much more room for my hands.

@737mechanic

9 ай бұрын

As long as you don't mind laying on your back and having to remove the skid plate that is great. At my age anytime I can do something from the top I do it.

@BMMEC2009

9 ай бұрын

@@737mechanic I hear you though. I just did it today. Coated some surfaces with fluid film while I was under there.

What kind of miles before seeing belt cracks…?

@737mechanic

6 ай бұрын

Depends on the brand of the belt, the make and model of the car, the climate it is driven in, and whether it is a lot of highway driving vs stop-and-go and-go driving. I have seen belts with 100,000 still in good shape and belts with 50,000 that are cracked and need changing.

@offgridmangogrower

6 ай бұрын

My Tacoma has 140k So I need to inspect it…farm truck…tough life. The bottom acess way seems easier…@@737mechanic

Wondering wen you were going to figure out you have to rap it around the fan first

that was some great video. It just seems like that belt does not provide enough traction to the water pump pulley. I wonder if slippage on the water pump pulley could cause these Tacoma belts to have a shortened life. One of the very few times Id ever question the Toyota engineers.

@MrTomtusti

Жыл бұрын

I replaced my original belt at 278 k

@genesmith7921

7 ай бұрын

200K and still going, but its time.@@MrTomtusti

Honestly, you’re not saving the old belt just cut it once it’s off. If you aren’t keeping it as a backup no point in wasting the effort. I keep a new belt in my truck as a spare in the seat compartments and tools just in case

@737mechanic

7 ай бұрын

Sometimes I do simply cut it off.

@blueleo4004

7 ай бұрын

@@737mechanic thank you for this video btw. I’m not sure why I felt this was harder than it actually is. I’ve never had to change the belt yet and at 230k miles I think I might now haha.

The way he used that ratchet sounded terrible